Stainless steel burner tube package includes 3 right, 3 left and 3 crossover tubes. Main burners are 21" long tip to tip and crossover burners are 6-3/4" long. For Summit 600, 625, 650 and 675 series gas grills, "model years prior to 2000". Genuine Weber parts.

6-3/4" crossover burner tube for Weber Summit 400 and 600 Series grills, "model years prior to 2000". This smaller burner tube fits between the left and right main burner tubes of each burner set. Sold individually. Genuine Weber Part.

"Set of 6" stainless steel main burner tubes for Weber Summit 600 Series, "model years 2007 and newer". Each burner tube measures 20-1/2" long with top side flame hole porting. All burners feature an air/fuel mixture adjustment shutter with insect screen on the venturi end and a forked mounting tab on the back end. Genuine Weber Part.

"Individual" stainless steel burner tube for Summit 400 and 600 series "model years 2007 and newer". Burner tube measures 20-1/2" and is ported at the top. Features an air/fuel mixture adjustment shutter with insect screen on the venturi end and a forked mounting tab on the back end. More than one required, sold individually. (400 Series grills use 4 main burners, for full set of 4 see Part 67553 and 600 Series use 6 main burners for full set of 6 see Part 67554). Genuine Weber Part.

"Smoker" burner for Weber Summit 400 and 600 series, "model years 2007 and newer".   20-1/2" long stainless steel tube with spider screen and air adjustment shutter. IMPORTANT: This burner tube cannot be substituted for the main burners. Genuine Weber Part.

Stainless steel "Sear" Burner Tube, for Weber Summit 660 and 670, model years 2007 and newer. Burner tube measures 20-3/8" long. Features an adjustable air shutter, spider screen and heat shield flange on the valve end. The back end of the tube has a slotted mounting hole and an attached 4-3/4" long flame carry over channel. Genuine Weber Part.

Set of 2 flavorizer bar/burner support brackets for Weber Summit 600 Series models. Set includes one front and one rear bracket. Each bracket measures 34-1/8" long (between the mounting screw holes). Mounting hardware (4 screws) included. Attn: MODEL YEARS 2007 AND NEWER ONLY. Genuine Weber Part.  IMPORTANT: There are early 2007 Summit 600 Series models that this part will NOT fit.  Please closely compare the mounting end detail of the old part to the new, to assure fit.

Set of 4 heavy gauge stainless steel flavorizer bars for Summit 400/600, "model years 2007 and newer". Note: To replace all the bars you will need to order either another set of 4 or set of 5 as required for your model. Bars measure 18-1/8" long X 1-3/4" wide. Genuine Weber Part.

Set of 5 heavy gauge stainless steel flavorizer bars for Summit 400/600, "model years 2007 and newer". Note: To replace all the bars you will need to order either another set of 4 or set of 5 as required for your model. Bars measure 18-1/8" long X 1-3/4" wide. Genuine Weber Part.

Stainless steel warming rack for Weber Summit "600" Series, (model years 2007 and newer). Rack surface area measures 4" X 34-3/4". Measurement of the mounting pins "tip to tip" are, rear pins 36-3/8", front pins 37-3/16". Genuine Weber Part.

Heavy duty solid rod stainless steel cooking grate. Measures 11-3/4" wide  X 19-1/4" front to back. Fits a variety of Weber Summit 400/600 Series, model years 2007 and newer. E/S 420 -require one, E/S 440, 450, 460, 470, 640, 650, 670 -require two, E/S 620 –require three. IMPORTANT: Please verify dimensions before ordering. Sold individually. Genuine Weber Part.

Heavy duty solid rod stainless steel cooking grate. Measures 8-1/16" wide X 19-1/4" front to back. Rod diameter 5/16". Weber Summit E-670 and S-660/670 (model years 2007 and newer)  each require one.   IMPORTANT: Please verify dimensions.  Sold individually. Genuine Weber Part.

Heavy duty solid rod stainless steel cooking grate. Measures 15-3/8" wide  X 19-1/4" front to back. Fits a variety of Weber Summit 400/600 Series, model years 2007 and newer. E/S 420, 640, 650, 660, 670 – require one. IMPORTANT: Please verify dimensions.  Sold individually. Genuine Weber Part.

Heavy duty, "reversible" custom fit porcelain enameled cast iron griddle.  Features a smooth cooking surface on one side and a ribbed surface on the other. Fits Weber Summit 400/600 Series, Model Years 2007 to Current. Dimensions are 19-1/4" front to back X 12" wide.  Genuine Weber Part.

Set of 3 cooking grate sections for "some" Summit Gold series, 6 burner models. Channel formed rolled stainless steel. Each grate measures 17-3/8" front to back X 11-3/4" wide. Total set width is 35-1/4". IMPORTANT: PLEASE VERIFY DIMENSIONS. Genuine Weber Part.

Momentary light switch for "lighted" control knobs. Fits Summit 470/670, model years 2007 and newer. Features soft rubber push button top, two male flat spade terminals for wire connections and snap in place mounting tabs. Genuine Weber Part.

Heavy duty Genuine Weber® Locking 2-7/8in. Grill Caster Wheel with Leg Insert. Smoothly wheel your Weber gas grill into position with the aid of a gas grill replacement caster wheel for your Weber Grills' Genesis 300, Summit Series and Spirit model.

Don't get caught flat-footed! Replace your Weber Locking Grill Caster Wheel when grill portability is necessary. Replace any defunct casters with one of these genuine Weber caster wheels. Once in place, prevent wayward movement with the built-in locking mechanism for supreme steadiness.

IMPORTANT: Please verify dimensions.

• Dia. of the wheel measures 2-7/8in.
• Stem length measures 1-3/8in.

Fits the following Weber Grills:

• Spirit series (2009-2012)
• Genesis series (2007-2011)
• Summit series (2007-2011)
• Replaces older Weber Part# 79500

What’s Included:

• (1) 2-7/8in. Locking Caster Wheel with Leg Insert for Weber® grills.
• One included, multiples may be necessary.
• Genuine Weber OEM part

Set of two, control knobs for main burners. Fit Summit 400/600 Series "model years 2007-2011". Diameter of the knobs is 2-3/8". Features red Weber Kettle logo on chrome top, gray body with finger grip notches and "Off/Ignition/High To Low" graphics. Genuine Weber Part. Helpful Installation Tip: place a small amount of liquid soap (or similar) to the control knob valve stem shaft prior to pressing the knob into place.

Smoker/IR burner control knob. Fits Weber Summit model years 2007 and newer. Diameter measures 1-7/8". Features finger notch grip, red Weber Kettle emblem on chrome top and "Off/Ignition/High to Low" graphics.  Important: This knob fits a 5/16" wide valve knob stem.  Genuine Weber Part.

Helpful Installation Tip: place a small amount of liquid soap (or similar) to the control knob valve stem shaft prior to pressing the knob into place.

Set of two "lighted" control knobs for main burners. Fit Summit 400/600 Series "model years 2007-2011". Diameter of the knobs is 2-3/8". Feature translucent body for emitting light, red Weber Kettle logo on chrome top, gray finger grip notches and "Off/Ignition/High To Low" graphics. Genuine Weber Part. Helpful Installation Tip: place a small amount of liquid soap (or similar) to the control knob valve stem shaft prior to pressing the knob into place.

Sear burner control knob. Fits Weber Summit model years 2007 and newer. Diameter measures 1-7/8". Features finger notch grip, red Sear Flame emblem on chrome top and "On/Off" graphics.  Important: This knob fits a 1/4" wide knob stem shaft.  Genuine Weber Part.

Helpful Installation Tip: place a small amount of liquid soap (or similar) to the control knob valve stem shaft prior to pressing the knob into place.

1-7/8in. Diameter Genuine Weber Light Gray Plastic Gas/Heat Control Knob fits a variety of Weber Genesis and Spirit models, along with Summit 400/600 Series-model years Prior to 2000. Twist your way to BBQ magic with new Weber heat control knobs for your Weber gas grill from Grillparts.com. Replace your broken, worn or lost Weber® Heat/Gas Control Knobs with these exact genuine replacements.

 

Fits the following Weber Gas Grill Models:

• Summit 400/600 Series-model years Prior to 2000
• Spirit 500 & 700
• Genesis 1000 & 2000 for older series grills
• Genesis 1000-5500 Prior to 2004
• Genesis Silver & Gold Prior to 2004 Model Year

What’s Included:

• (1) Genuine Weber Light Gray Plastic Gas/Heat Control Knob:
• Measures 1-7/8in. diameter.
• Stem on bottom is 1-3/8in. in length.
• Sold individually.
• Please Verify Dimensions.
• Genuine Weber Part.

Genuine Weber® 8in. diameter replacement plastic wheel for most Weber 26in. Kettles (2009-14), Ranch (2000-19), and Q 300/320 (2006-13) Kettle Grills. 8in. diameter black plastic wheel with gray colored snap-in hub-cap with Weber name detail. Features a 3/8in. diameter axle hole. Axle shaft hub extends 1/4in. beyond the back of the wheel frame. Axle hub caps and hardware not included.

Don't get caught flat-footed! Replace your Weber Kettle Wheels for the right height and when grill portability is necessary. 

What's Included:

• (1) 8in. Weber Kettle Wheel
• (1) Gray Decorative Hub Cap
• (2) Axle Caps/Wheel Retainers for installation.
• Axle hole opening is 3/8in. diameter, Axle shaft hub extends 1/4in. beyond wheel frame.
• Genuine Weber Part
• Sold Individually.

Set of two, control knobs for main burners. Fit Summit 400/600 Series "model years 2012 and newer". Diameter of the knobs is 2-3/8". Features red Weber Kettle logo on chrome top, gray body with finger grip notches and "Off/Ignition/High To Low" graphics. Genuine Weber Part.  Helpful Installation Tip: place a small amount of liquid soap (or similar) to the control knob valve stem shaft prior to pressing the knob into place.

Set of two "lighted" control knobs for main burners. Fit Summit 400/600 Series "model years 2012 and newer". Diameter of the knobs is 2-3/8". Feature translucent body for emitting light, red Weber Kettle logo on chrome top, gray finger grip notches and "Off/Ignition/High To Low" graphics. Genuine Weber Part.  Helpful Installation Tip: place a small amount of liquid soap (or similar) to the control knob valve stem shaft prior to pressing the knob into place.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

Genuine Weber® Grills Quality Part. 10 foot length of 1/2in. ID flexible Stripwound gas hose and Quick Connect kit with 1/2in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 10ft. of 1/2in. ID flexible Stripwound gas hose with 1/2in. fittings.
• Quick Connect Fittings: Includes a 1/2in. Quick Connect fitting (that screws onto a 1/2in. NPT male pipe thread) and a 1/2in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

Fitment:

• Weber: Important: This hose assembly fits Weber Models with 1/2in. fittings only. DOES NOT FIT grills with 3/8in. fittings (see Item# 82185 for proper part). Please confirm your size before ordering. Fits Most Weber Models, including but not limited to; Genesis models with 1/2in. fittings, Summit 400 and 600, Summit Gold A and Platinum.
• Fits Many Other Brands: Alfresco, Broilmaster, Broilmaster 3x and 4x, Twin Eagles, Viking, Wolf and others that are equipped with 1/2in. SAE fittings.

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

• 1 On/Off Ball Valve Quick Connect Fitting
• Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.

1/2in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Sizing:

• 3/4in. ID end opening (1/2in. FNPT). Used with 1/2in. ID gas hose. ANSI certified for natural (NG) and propane (LP) gas use.

What’s Included:

• 1 On/Off Ball Valve Quick Connect Fitting, 3/4in. ID end opening (1/2in. FNPT) and Quick Connect Coupler

1/2in. Quick Connect Fitting for use with 1/2in. ID gas hose. 3/4in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other medium BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick Connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 1/2" Gas Line Quick Connect Fitting

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 3/8" Gas Line Quick Connect Fitting

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

5/16in. ID propane/LP gas hose in 30 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 30in. hose 3/8in. fitting, with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

Propane (LP) valve assembly with control knob.  The valve assembly includes the LP orifice (drilled to 1.03), igniter flash tube and attached electrode. Fits Weber Summit 400/600 series, "model years 2007 and newer".  IMPORTANT: If this valve assembly is used to convert fuel type, from Natural Gas (NG) to Propane (LP), all Weber warranties on your grill will be voided.

Natural gas (NG) valve assembly with control knob.  The valve assembly includes the NG orifice (drilled to 1.65), igniter flash tube and  attached electrode.  Fits Weber Summit 400/600 series, "model years 2007 and newer".  IMPORTANT: If this valve assembly is used to convert fuel type, from Propane (LP) to Natural Gas (NG), all Weber warranties on your grill will be voided.

Genuine Weber® Push Button Ignitor Kit: Push Button (with lock-nut mounting), Wiring, Electrode and Collector Box Assembly for Weber Spirit (pre-2002), Weber Platinum I and II, Weber Genesis 1000 to 5500, Weber Genesis Silver and Gold (pre-2002).

Main burner Weber® Push Button Ignitor Kit contains a lock-nut style mount push button with double pole (2 wire connection terminals). Includes the gas collector box with electrode, and 14-1/2in. wiring. 

Push Button Ignitor Kit fits most the following Pre-2002 Weber Models:
Fits Weber Spirit (pre-2002), Weber Platinum I and II, Weber Genesis 1000 to 5500, Weber Genesis Silver and Weber Gold (pre-2002).

(NOTE: Push button has different appearance because of the newer lock-nut mounting vs. snap-in, and is now black in color).

• (1) Genuine Weber Push Button Ignitor Kit with Button Assy, Wiring, Electrode and Gas Collector Box 
• Instructions Included
• Replacement push button igniter kit for Weber gas grills main burners on older grills
• Genuine Weber OEM replacement part

Gas Collector Box, Electrode and Wiring Assembly for Weber grill that utilize a manual Push-Button Piezo Style Spark Generator.

Electrode with with 19-1/2in. wires. The black molded in wire from the electrode has a round connector end and the white wire terminates with two flat female spade connector ends.  Preassembled into the Gas Collector Box for Weber Grills with Manual "Push-Button" Piezo Spark Generators. High quality after market part.

What’s Included:
(1) Gas Collector Box, Electrode & Wiring Assy. for Weber Piezo style plunger-push-button spark generators.
(See part# UP7B for replacement Spark Generator)
 

Piezo Ignition Push Button Spark Ignitor with Palnut (lock nut) threaded mounting. Universal part that fits an unbelievable assortment of gas grill brands and outdoor appliances. Plunger push button with double pole: flat side connector and round bottom connector.

What’s Included:
(1) Piezo Ignition Plunger Push Button Ignitor Spark Generator and Palnut Lock Nut.

Genesis/Summit series temperature indicator, "without" mounting tab.  Dial incremented from 0 - 700 degrees F. Measures 2-3/8" in diameter. Probe length is 1-7/8" (measured from back of the guage to end of probe; Probe diameter is 1/4".  Includes wing nut and lock washer. Fits many Summit Gold/Platinum/Silver (model years 2000 and newer) and all Genesis 300 Series models.  Genuine Weber Part.

Genuine Weber® Grills easy to clean, disposable aluminum foil disposable grease drip pan liners. Perfect-fit 8-1/2in. x 6in. Liners, 10 per package.

A simple disposable drip pan liner will save you from greasy maintenance. Line the drip tray of your grill and make the disposal of grease easy and clean!

Fitment:

• Compatible with Weber Q, Pulse, Lumin, Weber Traveler, Spirit, Spirit II, 2022 Genesis 300/400, Genesis II 200/300, Genesis.

What’s Included:

• (10) Weber Aluminum Foil Grease Tray Liners (8-1/2in. x 6in.)

Genuine Weber® Grills easy to clean, disposable aluminum foil disposable grease drip pan liners. Perfect-fit 11in. x 5in. Liners, 10 per package.

A simple disposable drip pan liner will save you from greasy maintenance. Line the drip tray of your grill and make the disposal of grease easy and clean!

Fitment:

• Weber Smoke Fire, Weber Summit Gold 6-Burner, Platinum 6-Burner, Summit S-400, S-600, Genesis II and Genesis II LX 400/600 Series.

What’s Included:

• (10) Weber Aluminum Foil Grease Tray Liners (11in. x 5in. x 2-1/2in.)

Genuine Weber Rotisserie Motor for Weber Gas Grills with a rotisserie including Weber Summit series rotisseries. Rotisserie motor is 120V, and spins at 2.5-3.0 RPM, and has a 20lb. load weight limit.

Genuine Weber Replacement Rotisserie Motor for Weber Gas Grills features a black plastic casing with a stainless steel backing plate, a weather resistant On/Off switch, 34in. long cord/plug and installation instructions.

Looking for a Complete Rotisserie Kit for your grill? Try our Universal Grill Deluxe Electric Rotisserie Kit 

What’s Included:

• (1) Genuine Weber Replacement Rotisserie Motor for Weber Gas Grills:
• 120V electric motor, 2.5-3.0 RPM, 20lb weight limit
• Black plastic casing with a stainless steel backing plate
• Weather resistant On/Off switch
• 34in. cord with plug
• Installation instructions.
• Genuine Weber Part.

Does Not Fit: 

• Does not fit/replace Weber Charcoal Kettle rotisseries.
• Does not replace Ducane grill brand rotisserie motors.
   

Genesis, Genesis II and Summit series temperature indicator.  Dial face incremented from 0 - 700 degrees F. Measures 2-3/8" in diameter. Probe length is 1-7/8" (measured from back of the guage to end of probe; Probe diameter is 1/4".  Includes mounting wing nut.  Fits 2007 to current Summit models, 2007 to 2016 Genesis 300 Series and 2017 to current Genesis II and Genesis II LX models.  Genuine Weber Part.

Bezel for lid thermometer/temp gauge. Fits all Weber Genesis 300 Series and many Summit Series models (years 2000 and newer). Specifically designed to hold Weber thermometers, parts 67088 (67731) and 60393 (sold separately). Diameter at the base of the bezel is 3-5/8". Genuine Weber Part.

Grease catch pan kit for Weber Summit, SmokeFire, Genesis II and Genesis II 4 and 6 burner models. Includes catch pan and two catch pan liners (Part 6498). Aluminum pan measures 5" X 11" to the outside lips. Genuine Weber Part.

"Battery Pack Head" for lighted control knobs, fits Summit 470/670 "model years 2007 and newer". Features 4 flat male spade terminals on the back side, 2 for the switch wires and 2 for the lights. Three mounting screws and installation instructions included. This part matches with Weber part 70880 (Battery Pack Housing) sold separately. Genuine Weber Part.

"Battery Pack Housing", fits Summit 470/670 (model years 2007 and newer) and Genesis II "LX" (2017 and newer). Holds three "D" cell batteries (batteries not included). This part matches with a battery pack "head", Weber part 70879 (Summit) and part 67202 (Genesis II LX), sold separately. Genuine Weber Part.

Weber 7109 grill cover.  Polyester material enables "breathing" for better moisture control. Custom fit for Summit 600 Series gas grills. Measures 74-3/4" left to right X 26-3/4" front to back X 47" top to bottom.  Genuine Weber Part.

Genuine Weber replacement gas grill Aluminum Catch Pan and Catch Pan Steel Holding Bracket that fits most Weber gas grills manufactured prior to 2008.

If your greasy, messy catch pan and mounting holder has seen better days, swapping it out for a new genuine Weber Aluminum Catch Pan along with the Weber Catch Pan Steel Holding Bracket can get your grill back on track and prevent a serious mess below your grilled masterpieces. Keep your grill in top-notch shape with this genuine replacement part from Grillparts.com.

Measures: 9in. x 7-1/4in. x 3in., and fits the following Weber Models:

• Weber Spirit prior to 2008 (does not fit side-mount or front-mount control panel models manufactured after 2008)
• Weber Genesis 1000-5500
• Weber Genesis Silver/Gold/Platinum (except Gold/Platinum 6 burner models)
• Weber Platinum I/Platinum II
• Weber Summit

What’s Included:

• (1) Weber Grease Catch Pan 
• (1) Weber Grease Catch Pan Mounting Holding Bracket
• Genuine Weber Part

Don’t forget replacement Disposable Foil Catch Pan Liners part# 6415. 

The Weber Grill’n Go Handle Mount LED Flash Light with built-in motion sensor fits a large variety of Weber Gas Grills, and can be easily mounted, then removed for a portable flash light.

The Weber Grill’n Go BBQ LED light is a multifunctional grill light that easily attaches to the grill handle, and also detaches for extra light where you need it. Its motion sensor turns on when the lid is lifted and turns off once closed to save battery life, and added ease while grilling.

• LED illuminates the entire cooking surface
• On/off motion sensor saves battery life
• Can be detached and used as a flashlight
• Easily attaches to the grill handle

Fits "round handles" on the following Weber Grills:

• Weber Spirit (2007 and newer)
• Weber Genesis (2007 and newer)
• Weber Summit (2007 and newer)
• All Weber Spirit II
• All Weber Genesis II

What's Included:

• (1) Weber Grill’n Go BBQ LED Light kit
• LED Light (which can be removed from the mounting collar and used as a flashlight)
• Grill Handle Light Mounting Collar
• Three "AAA" batteries and mounting/use instructions.
• Genuine Weber Part.

Genuine Weber Aluminum Grease Catch Pan and One Single Disposable Foil Liner. Fits most Weber Genesis, Genesis II (2016+), Spirit, Summit Silver/Gold/Platinum and Summit 400/600 (prior to 2000) gas grills.

IMPORTANT: Please verify Catch Pan dimensions:
Pan measures 8-5/8in. x 6-1/8in. wide (width measurement includes the folded side rail extension).

Fits the following Weber Gas Grills:

• Weber Genesis
• Genesis II (2016+)
• Spirit
• Summit Silver/Gold/Platinum
• Summit 400/600 (prior to 2000) 

What's Included:

• (1) Weber Grills Aluminum Grease Catch Pan With Foil Liner, 8-5/8in. x 6-1/8in.
• (1) Disposable Foil Liner
• Foil liners available in a pack of 10, Part# 6415.
• Genuine Weber Part
• Please verify dimensions

Genuine Weber® Cast Iron Griddle. Weighing in at 8lbs., this 12in. diameter heavy duty, cast iron griddle will definitely hold some heat, and clean up easily thanks to its porcelain enamel finish and non-stick properties. Logo embossed handles and aesthetic design makes for great food presentations. Genuine Weber® Gourmet BBQ System Accessory, but can be used on top of any grill grate.

Can be used as an insert: Part of the Weber Gourmet BBQ System. Use with hinged adaptable cooking grates such as: 7420, 8835, 7585, 7586, 7587, 64812 and 64815 (sold separately).

• Heavy Duty Cast Iron
• Retains heat and delivers professional searing
• Porcelain enamel finish prevents sticking and allows for easy clean up
• Great for searing-Seals in moisture and flavor
• Perfect fit for Weber Gourmet BBQ System Hinged Cooking Grates

Other Gourmet BBQ System Accessories (Sold Separately):

Cast Iron Griddle: Part# 7421

Poultry Roaster: Part# 8838

Searing Grate: Part# 8834

BBQ Pizza Stone: Part# 8836

Genuine WEBER 12in. Diameter Cast Iron Sear Grate. Cast-iron grate evenly conducts heat, creating professional sear marks while sealing in the moisture and flavor of your food. The porcelain-enameled
finish prevents sticking and allows for easy clean-up.

Become the grill master you've always strived to be by perfecting the art and science of a flawlessly seared meat with a Weber Cast Iron Sear Grate. Luckily for you, and your guests, becoming that backyard hero has never been easier with the Gourmet BBQ System Searing Grate. Your guests will be impressed at first glance, and through the very last bite.

What’s Included:

• (1) Weber Cast Iron Sear Grate, part of the Weber Gourmet BBQ System:
• Dimensions - 1/2in. x 12in. x 12in.
• Seals in moisture and flavor
• Porcelain enamel finish prevents sticking and allows for easy clean up
• For use with The Gourmet BBQ System Hinged Cooking Grate
• Fits Weber Gourmet BBQ System Hinged Grates 12in. Center Grate: (7420, 8835, 7585, 7586, 7587, 64812 and 64815 sold separately).

Other Gourmet BBQ System Accessories (Sold Separately):

Cast Iron Griddle: Part# 7421

Poultry Roaster: Part# 8838

Searing Grate: Part# 8834

BBQ Pizza Stone: Part# 8836

Genuine Weber 13-3/8in. moisture absorbing cordierite BBQ grill pizza stone with an included chrome carry rack. Logo embossed handles and aesthetic design makes for great food presentations. For use on top of any grill grate.

The Pizza Stone is crafted with cordierite stone, which gets extremely hot in a hurry to create light and crispy, thin pizza crusts. Roll out your favorite dough, add the perfect toppings, and see what it’s like to bake brick-oven pizza in the comfort of your backyard. When you’re finished cooking, use the handy metal carry rack to quickly and easily transport your piping hot pizza and pizza stone from grill to table.

Can be used as an insert: Part of the Weber Gourmet BBQ System. Use with hinged adaptable cooking grates such as: 7420, 8835, 7585, 7586, 7587, 64812 and 64815 (sold separately).

• Cordierite stone absorbs moisture for light and crispy thin crust pizza
• Carry rack makes transporting the pizza quick and easy
• Fits into the Gourmet BBQ System cooking grate so that it stays in place while grilling
• Enjoy the taste of a crispy pizza with perfectly melted cheese and grilled toppings

Other Gourmet BBQ System Accessories (Sold Separately):

Cast Iron Griddle: Part# 7421

Poultry Roaster: Part# 8838

Searing Grate: Part# 8834

BBQ Pizza Stone: Part# 8836

Weber® 2-in-1 Stainless Steel 13in. Poultry Roaster and Grilling Tray. Features a removable poultry insert in the middle that allows you to use your favorite liquids for roasting that holds 12oz. Genuine Weber® Gourmet BBQ System Accessory, and can be used on top of any grill grate.

Not your run-of-the-mill poultry roaster! The versatile, 2-in-1 design of the Poultry Roaster/Grilling tray empowers you to grill your bird and sides at the same time. Prepare a crispy yet moist chicken in the center, while vegetables simmer around the rim. Fill the center liquid container to make a succulent beer-can chicken, or remove it to use the entire pan for vegetables or sides.

What’s Included:

• (1) Weber® 2-in-1 Stainless Steel 13in. Poultry Roaster/Grilling Tray:
• Removable 12oz. liquid container
• For use on ANY grill.
• Fits Weber Gourmet BBQ System Hinged Grates 12in. Center Grate: (7420, 8835, 7585, 7586, 7587, 64812 and 64815 sold separately).

Other Gourmet BBQ System Accessories (Sold Separately):

Cast Iron Griddle: Part# 7421

Poultry Roaster: Part# 8838

Searing Grate: Part# 8834

BBQ Pizza Stone: Part# 8836