American Outdoor Grill (AOG) Stainless Steel, 14-1/2in. x 6-7/8in. “U” Shape Center Feed Burner. A high quality replacement burner for AOG OEM Part 24-B-06.

Are you experiencing uneven heat distribution on your BBQ grill? Replace your burner with our AOG American Outdoor Grill Stainless Steel Burner. Over time, your grill's original burners become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean flame by replacing old burners with a high quality stainless steel AOG Grill burner to enjoy consistent surface heat, just like when your grill was new.

Fits the following Models:

• American Outdoor Grill (AOG), OEM Part 24-B-06

Key Features:

• Air/fuel mixture adjustment shutter for precise control.
• Attached flame crossover tube.
• Durable stainless steel construction for longevity.
• Two burner mounting legs on the underside.
• Three heat shield mounting support leg on the top.

What’s Included:

• (1) U-Tube Stainless Steel Burner, 14-1/2in. x 6-7/8in.

Replace and upgrade your grill's performance and safety with the American Outdoor Grill (AOG) Center Feed "U" Shaped Stainless Steel Tube Burner. Say goodbye to hotspots and hello to perfectly cooked meals every time you fire up your grill.

Genuine AOG American Outdoor Grill Two Piece Stainless Steel Vaporizing Panel Set For AOG 24in. American Outdoor Grill (AOG) Models.

Set Includes:

• Two genuine AOG stainless steel vaporizing panels/burner shields.
• Measure 15-1/2in. x 10-1/2in. each.
• 2 Panels= Total of 15-1/2in. x 21in. coverage.

These Genuine AOG (American Outdoor Grill) Vaporizing Panels are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it's nobody's business. AOG panels are carefully engineered with a waffle shape and unique venting to vaporize drippings and infuse your food with that smoky, savory goodness that'll have your taste buds singing with joy. 

Genuine AOG American Outdoor Grill Three Piece Stainless Steel Vaporizing Panel Set For 30in. American Outdoor Grill (AOG) Models. Three Vaporizing Panels for a Total of 15-1/2in. x 24-7/8in. coverage.

Set Includes:

• (3) Three genuine AOG stainless steel vaporizing panels/burner shields.
• Measure 15-1/2in. x 8-5/16in. each.
• Total of 15-1/2in. x 24-7/8in. coverage.

These Genuine AOG (American Outdoor Grill) Vaporizing Panels are stainless steel shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it's nobody's business. AOG panels are carefully engineered with a waffle shape and unique venting to vaporize drippings and infuse your food with that smoky, savory goodness that'll have your taste buds singing with joy.

American Outdoor Grill (AOG) Stainless Steel Vaporizing Panel for AOG 24in. and 36in. American Outdoor Grill Models. Replaces AOG OEM parts 24-B-05 and 36-B-05. Made in USA.

Includes:

• (1) AOG stainless steel vaporizing panel/burner shield.
• Repl. AOG OEM #24-B-05 and 36-B-05. Made in USA.
• Measures 15-1/2in. x 10-1/2in.
• Sold individually, more than one required for full coverage; 24in. AOG Grill models require (2); 36in. models require (3)

AOG (American Outdoor Grill) Stainless Steel Vaporizing Panels are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. AOG panels are carefully engineered with a waffle shape and unique venting to vaporize drippings and infuse your food with that smoky, savory goodness that’ll have your taste buds singing with joy.

American Outdoor Grill (AOG) Stainless Steel Vaporizing Panel for AOG 30in. American Outdoor Grill Models. Replaces AOG OEM part 30-B-05. Made in USA.

Includes:

• (1) AOG stainless steel vaporizing panel/burner shield.
• Repl. AOG OEM #30-B-05. Made in USA.
• Measures 15-1/2in. x 8-5/16in.
• Sold individually, more than one required for full coverage; 30in. AOG Grill models require (3).

AOG (American Outdoor Grill) Stainless Steel Vaporizing Panels are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. AOG panels are carefully engineered with a waffle shape and unique venting to vaporize drippings and infuse your food with that smoky, savory goodness that’ll have your taste buds singing with joy.

Genuine Blaze Grills Brand Solid Stainless Steel Rod Cooking Grate crafted from high quality 5/16in. diameter solid stainless rod for a lasting cooking surface. Cooking Grate for Blaze Grills, AOG, and others that require 18in. x 7-3/8in. grate sections.

Freshen up your grilling experience! Replace your cooking grates where the meat greets the heat with these sleek, robust solid stainless steel rod grates. Rust-resistant and easy to clean, these heavy duty stainless steel cooking grates make perfect sear marks and are great for everyday grilling for many seasons to come.

What’s Included:

• (1) Solid Stainless Steel 5/16in. Rod Cooking Grate - (18in. x 7-3/8in.)
• Sold Individually, more than 1 required depending on grill size.

Compatibility:

• Fits Blaze Grills Traditional 3, 4 and 5 burner models. Fits a variety of gas grills. Cooking Grate for Blaze Grills
• AOG (American Outdoor Grills)
• Other Grills that require 18in. x 7-3/8in. grate sections.

18in. x 7-3/8in. Solid Stainless Steel Rod Cooking Grate crafted from high quality 5/16in. diameter solid stainless rod for a lasting cooking surface. Cooking Grate for Blaze Grills, AOG, and others that require 18in. x 7-3/8in. grate sections. Replaces Blaze Grills OEM Part BLZ-32-034. 

Freshen up your grilling experience! Replace your cooking grates where the meat greets the heat with these sleek, robust solid stainless steel rod grates for AOG grills, Blaze grills and others. Rust-resistant and easy to clean, these heavy duty stainless steel cooking grates make perfect sear marks and are great for everyday grilling for many seasons to come.

What’s Included:

• (1) Solid Stainless Steel 5/16in. Rod Cooking Grate - (18in. x 7-3/8in.)
• Sold Individually, more than 1 required depending on grill size.
• High Quality Cooking Grate, Made in the USA.

Compatibility:

• Fits Blaze Grills Traditional 3, 4 and 5 burner models.
• AOG (American Outdoor Grill) T-Series 24in. Grills
• Others Grills that require 18in. x 7-3/8in. grate sections.

Genuine AOG Grills Brand Solid Stainless Steel Rod Cooking Grate crafted from high quality 5/16in. diameter solid stainless rod for a lasting cooking surface. Cooking Grate Set for AOG grills and others that require an 18in. x 23-3/8in. grate set.

Freshen up your grilling experience! Replace your cooking grates where the meat greets the heat with these sleek, robust solid stainless steel rod grates. Rust-resistant and easy to clean, these heavy duty stainless steel cooking grates make perfect sear marks and are great for everyday grilling for many seasons to come.

What’s Included:

• (2) Solid Stainless Steel 5/16in. Rod Cooking Grates - (each grate measures,18in. x 11-9/16in.)
• Sold as a Set of 2, (total Set dimensions are 18in. x 23-1/8in.)

Compatibility:

• Fits a variety of AOG gas grills and many other brands/models
• Other Grills that require 18in. x 23-1/8in. grate sections.

Genuine AOG (American Outdoor Grills) Main Burner Gas Control Valve for AOG L-Series Models, manufactured prior to 2015. Complete with mounting saddle and attachment screws. Valve Length: 3-1/2in. Overall including control knob stem. Gas Orifice is not included.

Is your AOG Gas Control Valve sticky, leaky or malfunctioning? Replace yours and accurately regulate the flow of fuel to your burners. Keep the flames dancing just right with a new, genuine American Outdoor Grills gas control valve from Grillparts.com.

What’s Included:

• (1) Brass Main Burner Valve for AOG L-Series (pre. 2015)
• Valve Length: 3-1/2in. Overall
• (1) Mounting Saddle
• (2) Attachment Screws
• Gas Orifice is not included

Genuine AOG (American Outdoor Grills) Main Burner Gas Control Valve and Built-In Ignitor for AOG T-Series Models. Features aluminum body casting with integrated piezo igniter, mounted electrode and wire. Includes mounting saddle clamp and screw. Gas Orifice is not included.

Compatible with AOG T-Series Models manufactured from 2014 to present.

Is your AOG Gas Control Valve sticky, leaky or malfunctioning? Replace yours and light up your grill consistently with its fresh, built-in ignitor, then accurately regulate the flow of fuel to your burners. Keep the flames dancing just right; order a new genuine American Outdoor Grills gas control valve from Grillparts.com today!.

What’s Included:

• (1) Main Burner Valve for AOG T-Series (2014+) with integrated Ignitor
• (1) Mounting Saddle
• (1) Attachment Screw
• Gas Orifice is not included

Genuine AOG (American Outdoor Grills) 3in. Large Metal Control Knob for AOG T-Series Grills' Main Burners. This large, polished metal gas knob dial features “Off, Light, and High-to-Low" cast-in indicators that wont rub off, and red silicon twist grip to keep the knob cool to touch.

Light and twist your way to BBQ magic. Replace your broken, worn or lost AOG (American Outdoor Grills) Control Knob with this exact genuine AOG replacement knob for AOG T-series outdoor gas grills.

What’s Included:

• (1) 3in. Gas Control Knob for the main burners on AOG T-Series grills (2014+)
• Sold individually. (2) Required for 24in. Grills, (3) for 36in. Grills.

Genuine AOG (American Outdoor Grills) 2-1/2in. Back-Burner Metal Control Knob for AOG T Series Grills. Polished metal back-burner gas knob dial features “Off, Light, and High-to-Low" cast-in indicators that wont rub off, and red silicon twist grip to keep the knob cool to touch.

Light and twist your way to BBQ magic. Replace your broken, worn or lost AOG (American Outdoor Grills) Control Knob with this exact genuine AOG replacement knob for the back-burner of AOG T-series outdoor gas grills.

What’s Included:

• (1) 2-1/2in. Gas Control Knob for rear burners on AOG T-Series grills (2014+)
• Sold individually.

Genuine FireMagic 3in. Large Metal Gas/Heat Control Knob for the Main Burners on FireMagic and AOG Grills. This large, 3in. polished metal gas knob dial features “Off, Light, and High-to-Low" cast-in indicators that wont rub off, and black silicon twist grip to keep the knob cool to touch.

Light and twist your way to BBQ magic. Replace your broken, worn or lost FireMagic/AOG Control Knob with this exact genuine replacement knob from FireMagic Grills.

Fitment:

• FireMagic Grills Gas Control Knob for 2007+ model years; fits many Elite, Monarch, Regal 2, Regal 1, Custom 2, Custom 1, Deluxe and Aurora models
• FireMagic Grills Gas Control Knob for pre. 2011 model years; Echelon
• AOG (American Outdoor Grills); FireMagic Grills Gas Control Knob fits AOG "L" and "T" Series BBQ gas grills.

What’s Included:

• (1) 3in. Gas Control Knob for the main burners
• Sold individually. (2) Required for 24in. Grills, (3) for 36in. Grills.

Genuine FireMagic 2-1/2in. Metal Control Knob for the back/rear burners on FireMagic and AOG Grills. Polished metal gas knob dial features “Off, Light, and High-to-Low" cast-in indicators that wont rub off, and black silicon twist grip to keep the knob cool to touch.

Light and twist your way to BBQ magic. Replace your broken, worn or lost FireMagic/AOG Control Knob with this exact genuine replacement knob from FireMagic Grills.

Fitment:

• FireMagic Grills Gas Control Knob for 2007+ model years; fits many Elite 50, Monarch, Regal 1, Regal 2, Custom 1, Custom 2, Aurora and Echelon grills. Does Not Fit Diamond Series.
• AOG (American Outdoor Grills); FireMagic Grills Gas Control Knob fits AOG "L" and "T" Series BBQ gas grills.

What’s Included:

• (1) 2-1/2in. Gas Control Knob for rear/back burners

Genuine AOG (American Outdoor Grills) Igniter Electrode and Collector Box Assembly (for main U burners), including a 23in. ignition wire with flat female spade ends and connection protector.

Ignitors are the spark plugs of your grill, igniting the flames and keeping your grill ready-to-go.  The collector box's job to corral gas and create a ground for those sparks and direct them to the appropriate burner. With a fresh electrode and collector box, you're not just fixing a problem – you're unleashing a blaze of glory.

Fitment:

• American Outdoor Grill (AOG) L-Series models manufactured prior to 2015.
• AOG Models: 24NB, 24NG, 24PC, 24PC-00SP, 30NB, 30NB-00SP, 36NB, 36NB-00SP, 36PC

Sold Individually. 24in. AOG Grills require (2); 30in. and 36in. Grills require (3)

What’s Included:

• (1) Ignitor Electrode
• (1) Collector Box (1-3/4in. x 1in.)
• (1) 23in. ignition wire with female spade connector ends
• (1) Connection Protector Sleeve

What’s More:
There are a few reasons why an ignitor might decide to call it quits. It could be as simple as a buildup of grease or gunk, gumming up the works and preventing the spark from igniting the burner. Or maybe theres cracked ceramic internally shorting-out or it's just worn out from years of faithful service, like a soldier who's seen one too many battles. Get your grill fired up consistently with a new Genuine AOG (American Outdoor Grills) Igniter Electrode and Collector Box Assembly from Grillparts.com

Genuine AOG (American Outdoor Grill) Igniter Assembly; Includes ceramic insulator and electrode with attachment wire, mounted to flash tube for main burners. This assembly mounts to the main burner gas control valve on AOG T-Series Grills manufactured in 2014 and newer with Flame Thrower gas valves.

Why do you need a new AOG Electrode and Flash Tube? Over time, grease, food residue, and other contaminants can build upon the electrodes, hindering their ability to generate a spark and ignite gas. Electrodes can wear out over time due to exposure to heat and corrosion. Replace your electrodes if they are visibly damaged, worn and can no longer be cleaned/serviced.

Whats Included:

• (1) 2-7/8" long flash tube
• (1) Mounted white ceramic insulator and electrode with molded-in 4-7/8in. wire with flat female spade connector.

Genuine AOG Push Button Igniter Switch for American Outdoor Grill (AOG) L-Series models manufactured in 2014 to present. Features snap-in mounting, a push-button top along with 2 male spade terminals on the back side for wiring.

Install a new AOG L-Series Igniter Switch to replace a cracked, broken or malfunctioning Push Button to get your grill started like new.

Genuine AOG Two Port Output Ignition Module for 24in. American Outdoor Grill L-Series grills that DO NOT have a side burner/rotisserie back burner.

Two Port Output AOG Spark Generator measures 3-1/2in. (including mounting tab). Features four male flat spade terminals, (2) output for electrodes and (2) inputs for the push button switch. Snap-in style mounting tabs.

Why a new AOG grill ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your AOG Two Port Output Ignition Module and light your way to a better grilling experience!

What’s Included:

• (1) Genuine AOG 2-Output Spark Generator Ignition Module

Genuine AOG/FireMagic Four Port Output Ignition Module for American Outdoor Grill L-Series grills and FireMagic Aurora Models (Pre. 2015) and A53s, A43s that feature side burners/rotisserie back burners.

AOG/FireMagic 4-Output Port Output Spark Generator measures 3-1/2in. (including mounting tab). Features six male flat spade terminals, (4) output for electrodes and (2) inputs for the push button switch, and one 12in. grounding wire. Snap-in style mounting tabs.

Why a new AOG grill ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your AOG/Firemagic Four Port Output Ignition Module and light your way to a better grilling experience!

What’s Included:

• (1) Genuine AOG/FireMagic 4-Output Port Spark Generator Ignition Module

Genuine AOG/FireMagic Six Output Port Ignition Module for American Outdoor Grill L-Series grills and FireMagic Aurora Models (Pre. 2015) that feature side burners/rotisserie back burners.

AOG/FireMagic 6-Output Port Output Spark Generator measures 4-5/8in. (including mounting tab). Features eight male flat spade terminals, (6) output for electrodes and (2) inputs for the push button switch, and one 12in. grounding wire. Snap-in style mounting tabs.

Why a new AOG grill ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your AOG/Firemagic Six Port Output Ignition Module and light your way to a better grilling experience!

What’s Included:

• (1) Genuine AOG/FireMagic 6-Output Port Spark Generator Ignition Module

Universal gas grill 2 output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your 2 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

• (1) Universal Electronic Ignition Module with Push Button - 2 Output 

Universal gas grill 4 output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your 4 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

• (1) Universal Electronic Ignition Module with Push Button - 4 Output

Universal gas grill Single Output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (1) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your Single Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

• (1) Universal Electronic Ignition Module with Push Button - 1 Output

Replacement 12 Volt/10 Watt Halogen light bulb that fits the lamp assembly on all FireMagic Echelon and Aurora models, along with AOG (American Outdoor Grills) L-Series grills.

Replaces AOG/Firemagic OEM Part 24187-15.

Genuine FireMagic/AOG 5-3/8in. x 3-5/8in. Analog Thermometer with Chrome Bezel. Features a dial face temperature range of 100-1000°F, 100-500°C. 5/16in. diameter temperature probe measures 2-3/8in. length. Includes two mounting stud bolts with nuts.

• Fits FireMagic Echelon, Aurora and Choice gas grills 2013 and newer.
• Fits American Outdoor Grill (AOG) models 2014 and newer. 

Genuine FireMagic/AOG (American Outdoor Grill) Rectangular Glass Light Lens for lamp assembly. Measures 3-1/8in. x 2-9/16in.

• Fits all FireMagic Echelon/Aurora/Magnum models.
• Fits American Outdoor Grill (AOG) L Series grills. 
• Light bulb and lamp assembly are not included, see item #24187-28
• Genuine FireMagic/AOG Part.

Complete Lamp Assembly including the housing, bulb, lens and wire for all FireMagic Echelon and Aurora models, and AOG (American Outdoor Grill) models manufactured in 2014 and newer.

Complete lamp assembly includes:

• Aluminum housing.
• Glass lens.
• 12V/10W Halogen bulb.
• 41in. dual wires with connector end.
• Genuine FireMagic/AOG Part.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.