CharBroil Commercial Series Grill Parts

grill parts: 16-7/8" X 4-1/2" Flame Tamer
 Commercial Series grill parts: 16-7/8" X 4-1/2" Flame Tamer (image #1)  Commercial Series grill parts: 16-7/8" X 4-1/2" Flame Tamer (image #2)  Commercial Series grill parts: 16-7/8" X 4-1/2" Flame Tamer (image #3)  Commercial Series grill parts: 16-7/8" X 4-1/2" Flame Tamer (image #4)  Commercial Series grill parts: 16-7/8" X 4-1/2" Flame Tamer (image #5)

16-7/8" X 4-1/2" Flame Tamer

Item# 80000947
This part is in stock. IN STOCK
$22.65
Burner shield or "Flame Tamer". Stainless steel. Measures 4-1/2" width X 16-7/8" front to back with measurement including mounting tabs. For easier measurement we measure the width from edge to edge with the shield upside down.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

  • Qty:
Item# 80001449
Heavy duty cast iron replacement burner. Burner dimensions are 2-1/4" wide X 13-3/4" including the bottom side venturi tube length. Includes pin clip.
In Stock
$21.55
View
Add
Item# 80018594
Cast iron burner with tent shaped top. Porcelain coated for extended durability. Features air adjustment screw to adjust air/gas mixture. Measures 13-3/4" end to end.
In Stock
$22.95
View
Add
Item# 80018595
Cast iron burner with an angled tent shaped top. Burner dimensions are 15-7/8" long X 2-1/4" wide. The length measurement includes the bottom venturi tube length. The mounting pin clip is included. IMPORTANT: Measurement from the end of the venturi (valve end) pipe to the center of the rear mounting peg (located on the bottom of the burner) is 15-1/4", please verify this dimension. (Product note: This slightly narrower burner economically replaces OEM 80018595.)
In Stock
$23.95
View
Add
Item# CICH
Cast iron burner with center slotted hole. Burner length including venturi tube is 15-1/4" and measures 3-1/2" wide. Includes mounting pin. Features air/gas adjustment locking screw at bottom of venturi end. Porcelain coated for extended durability.
In Stock
Retail: $40.35
$23.79
View
Add
Item# 80013421
15-7/8" long stainless steel tube burner. Narrow end which connects to the valve includes wire mesh spider guards. IMPORTANT: This burner uses a "screw" mounted style carry over tube.
In Stock
$11.99
View
Add
Item# 80016864
Stainless steel tube burner.  Measures 16-7/8" long x 1" in diameter.  Fits a variety of Charbroil Conventional and Tru-Infrared models, which utilize a "screw mount" carry over tube.  The venturi or valve end of the tube has an insect screen, air mixture screw and mounting holes for the electrode.  The back end of the tube features a short 90 degree bend with a centered mounting screw hole and a hole for the carry over tube mounting screw. Burner mounting hardware included (one each, screw, flat washer and lock washer).  Genuine Charbroil Part. 
In Stock
$11.99
View
Add
Item# 80029717
15-7/8" long X 1" DIAMETER stainless steel main burner tube. Features indentations for clamp-on style igniter. The mounting flange end has a short 90 degree bend with a centered "round" mounting hole. Crossover stud screw located at mid-tube. Crossover tube mounting hardware included (1 cotter pin and 1 stud screw). Replaces part G527-2200-W1. Genuine Charbroil Part.
In Stock
$10.99
View
Add
Item# G508-A300-W1
Stainless steel burner for Charbroil TEC Series replaces old brass burner. Burner measures 15-7/8" long and includes a spider guard screen at the valve end. Also features an air adjustment screw at the burner center near the valve end. (Replaces part number 80008991)
SOLD OUT: Expected In Stock 11/30/2024
$12.49
View
Item# G515-2200-W1
15-7/8" long X 1" diameter stainless steel tube burner. Features indentations for clamp-on style igniter. The mounting flange end has a short 90 degree bend with a centered "slotted" mounting hole. Crossover stud screw located at back end of tube. Crossover tube mounting hardware included(2 cotter pins and 1 stud screw).
In Stock
$11.99
View
Add
Item# G619-3200-W1
14-3/4" long X 5/8" diameter stainless steel main burner tube. 5/8" OD tube features vented venturi end, slotted back-end tab (to accept the burner brace mount, see part G466-0047-W1, sold separately), carryover tube "mounting stud screw", air mixture adjustment screw and one carryover mounting cotter pin.  Fits a variety of Charbroil Amplifire models. Sold individually, more than one required. Charbroil OEM Part.
In Stock
$11.99
View
Add
Item# 80005592
This  4-5/8" carryover tube mounts between the burners to carry flame and ignition over to the adjacent burner. Designed to fit Charbroil 1" diameter main burner tubes that require a "screw mounted" carryover channel.  The tube channel measures 4-5/8" long.  (This measurement is the tube length only, does not include the mounting tabs).   Genuine Charbroil Part.
In Stock
$6.49
View
Add
Item# 80015760
The flash tube mounts between the burners to carry flame and ignition over to the adjacent burner. Designed to fit Charbroil 1" diameter main burner tubes that require a "screw mounted" carryover channel. (Burners are not included and are shown for display purposes). Flash tube length is 5-5/8" not including screw tabs. Screws included.
In Stock
$4.99
View
Add
Item# G515-0015-W1
Stainless steel carryover tube. Tube channel measures 4-1/2" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins.  Designed to fit Charbroil 1" diameter burner tube.
In Stock
$3.99
View
Add
Item# G515-0044-W1
Stainless steel carryover tube. Tube channel measures 6-5/8" long. (This measurement does not include the mounting tabs). Includes 2 cotter pins.  Designed to fit Charbroil 1" diameter burner tube.
In Stock
$3.59
View
Add
Item# G614-0095-W1A
Stainless steel carryover tube. Tube channel measures 4-9/16" long (this measurement does not include the mounting tabs). Comes with 2 cotter pins. Designed to fit Charbroil 1" diameter burner tube.
In Stock
$3.59
View
Add
Item# 80000947
Burner shield or "Flame Tamer". Stainless steel. Measures 4-1/2" width X 16-7/8" front to back with measurement including mounting tabs. For easier measurement we measure the width from edge to edge with the shield upside down.
In Stock
$22.65
View
Add
Item# 80003394
Black porcelain coated burner shield. Measures 17" long X 3-7/8" across the bottom.
In Stock
$6.49
View
Add
Item# 80008074
Porcelain coated steel flame tamer. Dimensions are 14-5/8" X 4-1/2". Char-Broil original equipment part.
In Stock
$10.99
View
Add
Item# 80017023
Burner shield heat distribution plate. Porcelain coated steel. Dimensions are 17" long X 3-7/8" measured across the bottom edge to edge. The special features are the two slotted holes on the top edges of the shield.
In Stock
$6.49
View
Add
Item# 80029723
16" long X 3-3/4" wide porcelain coated steel flame tamer. Features two raised mounting tabs at each end. Replaces older part numbers G501-0008-W1, 80006357 and 80003332. Genuine Charbroil Part.
In Stock
$9.99
View
Add
Item# G208-0029-W1
Burner heat tent. Black porcelain coated steel. Measures 6-1/4" wide X 16-7/8" long.
In Stock
$13.49
View
Add
Item# G430-0005-W1
Porcelain coated vented heat tent. Measures 14-5/8" long (including end tabs) X 4-1/4" measured across the bottom.
In Stock
$6.49
View
Add
Item# 80003053
Black porcelain coated burner support bracket with stainless steel carryovers. Used with 4 burner models. Bracket length 32-1/4". (Burner shown is not included and is shown for display purposes only)
In Stock
$14.16
View
Add
Item# 80012481
Adjustable burner bracket with stainless carryover channels, for 3 burner models. Adjusts 23-1/2" to 25". Includes 2 tube extension channels, 2 bar extensions, 2 angled extensions for brackets ending at an angle, hardware and instructions. Fits burners up to 2-5/8" wide.
In Stock
$16.99
View
Add
Item# 92261
Charbroil "Big Easy" stainless steel heat tent with support leg frame. The leg frame measures 8-1/2" X 5-1/2" and it supports the heat tent over the burner. The heat tent measures 6" X 6". This part includes one support and one heat tent.
In Stock
Retail: $38.72
$19.06
View
Add
Item# 65993
Heavy duty 3 piece, matte finish cast iron cooking grate set. Each piece measures 18-1/8" front to back X 9 7/8" wide for a total set width of 29-5/8". Features side edge finger notches for easy installation and removal.
In Stock
Retail: $263.69
$109.12
View
Add
Item# 66652
Heavy duty 2 piece, matte finish cast iron cook grate set. Each grate measures 18-5/16" front to back X 13-1/8" wide. Total measurement is 18-5/16" X 26-1/4".
In Stock
Retail: $194.85
$89.34
View
Add
Item# 68073
Heavy duty 3 piece "matte finish" cast iron cooking grate set. Each section measures 18-3/4" front to back X 10-1/2" wide. For a total set width of 31-1/2".
In Stock
Retail: $170.16
$86.98
View
Add
Item# 80000293
Heavy duty porcelain coated steel rod cooking grate set. Set contains two sections each measuring 16-3/4" front to back X 12" wide for a total measurement of 16-3/4" X 24".
In Stock
$54.99
View
Add
Item# 80001453
"Two piece" cooking grate set made of stainless steel round hollow tube rails and square tube end pieces.  Each section measures 16-3/4" front to back X 12" wide, for a total set width of 24".  IMPORTANT: The square tube end pieces measure 1-1/8" tall X 3/4" wide, please make sure your grill lid has adequate clearance to shut completely.
In Stock
$43.71
View
Add
Item# CG58PCI

Heavy duty, cast iron cooking grate holds heat, and cleans up easily thanks to its porcelain enamel matte finish and non-stick properties. One grate at 19-1/8in. x 12-3/8in. width. Measure you’re grills grate area to calculate the quantity of grates your grill requires.

Freshen up your grilling experience! Replace your cooking grates where the meat greets the heat with these heat-holding and robust solid cast iron cooking grates. Rust-resistant and easy to clean, thanks to their porcelain enameled finish. They make perfect sear marks and are great for everyday grilling for many seasons to come.

What’s Included:

  • (1) 19-1/8in. x 12-3/8in. porcelain coated cast iron cooking grate.
  • Sold individually, more than one required depending on grill size.
In Stock
Retail: $61.60
$49.32
View
Add
Item# G350-0024-W2
Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame. (Replaces G350-0024-W1). Genuine Charbroil Part.
In Stock
$9.99
View
Add
Item# G351-0060-W1
Control knob bezel with "Off/High/Low" graphics. Measures 3-1/8" in diameter. Features 2 elongated vertical and 2 large round horizontal mounting holes. Hardware included,2 screws and 2 lock washers. (Replaces parts, G354-0022-W1, G611-0073-W1 and 80006508)
In Stock
$3.59
View
Add
Item# G419-0006-W1
Chrome control knob bezel. Bezel is 2-3/4" in diameter and is slotted both vertically and horizontally. Screws not included.
In Stock
$3.59
View
Add
Item# G501-5800-W1
Main burner black plastic control knob with chrome top. Factory substitute for chrome knob with black plastic detail. Measures 2" in diameter.
In Stock
$5.99
View
Add
Item# G515-00B3-W1
Control knob bezel with infinite range graphics. Measures 3-1/8" in diameter. Features 2 elongated vertical (bottom hole cut horizontally) and 2 large round horizontal mounting holes. Hardware included (2 screws and 2 lock washers).  Replaces parts G515-0065-W1 and G519-0064-W1.  Genuine Charbroil Part.
In Stock
$3.59
View
Add
Item# 100700-168

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

  • (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.
In Stock
$76.99
View
Add
Item# 104007

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

  • 1 On/Off Ball Valve Quick Connect Fitting
  • Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.
In Stock
$32.99
View
Add
Item# 104406

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 3/8" Gas Line Quick Connect Fitting
In Stock
$23.34
View
Add
Item# 106238-30

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

  • 2-Stage Regulator and 30in. Hose Assembly which includes:
  • 3/8in. ID high pressure hose, 30in. length.
  • 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
  • One 3/8in. to 3/4in. brass adapter included.  
In Stock
$49.99
View
Add
Item# 3090

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

  • This timer accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3090-01

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.
In Stock
Retail: $20.00
$18.00
View
Add
Item# 3092

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

  • Accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer Assembly, 20/40/60min. durations. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3092-01

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.
In Stock
Retail: $26.00
$23.40
View
Add
Item# 5520-11T

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

  • 20/40/60 minute interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $247.00
$222.30
View
Add
Item# 5520-13T

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

  • 1-2-3 hour interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box:

  • Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $239.00
$215.10
View
Add
Item# 65941

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
In Stock
Retail: $35.29
$33.00
View
Add
Item# 99281

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
SOLD OUT: Expected In Stock 11/30/2024
Retail: $36.99
$34.95
View
Item# HR4B

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

  • (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $37.65
$28.20
View
Add
Item# HR5B

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
  • Instruction sheet.
In Stock
Retail: $68.25
$39.38
View
Add
Item# HR7B

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $43.20
$28.86
View
Add
Item# NG10

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $82.99
$54.04
View
Add
Item# NG12

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $86.99
$60.94
View
Add
Item# NG14

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $93.99
$65.84
View
Add
Item# PR-SU

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

  • Convertable to/from Natural Gas to/from Propane Gas Regulator
  • 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
  • Rated 1/2 PSIG.  
In Stock
$20.59
View
Add
Item# RGB

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

In Stock
Retail: $11.35
$7.95
View
Add
Item# 03333
Three output "AA" electronic ignition module with push button battery cap. Features 3 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.
In Stock
$18.57
View
Add
Item# 03340
Four output "AA" electronic ignition module with push button battery cap. Features 4 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.
In Stock
Retail: $37.92
$17.92
View
Add
Item# 04430
Main burner electrode with molded in 43" long wire that terminates with a female flat spade fitting.  Also includes an adapter wire with male spade and female round end fittings that will allow for connecting to either an electronic or a manual (rotary or push button) spark generator.  Features a 2-7/8" long white ceramic insulator with a 90 degree electrode tip and an in-line mounting tab with 2 screw holes. This electrode is designed to mount directly onto the main burner tube. Mounting hardware "not" included. Fits many Charbroil, Master Forge and Kenmore models as well as many other brands/models.
In Stock
Retail: $14.09
$6.95
View
Add
Item# 80000653
Kit includes a 2-pole "AA" electronic spark generator (where there are two wire connections on the back side), spark box with electrode and additional hookup wire. Battery not included.
In Stock
$14.59
View
Add
Item# 80004306
Electronic ignition kit for some Commercial Series models. Includes 2-pole electronic spark generator, side-burner electrode, 4" main burner electrode with wire, and 38" connecting wire.
In Stock
$27.29
View
Add
Item# 80004346
2 output "AA" electronic igniter kit. Kit includes a 2 output "AA" electronic ignition module with push button/battery cap and spring, module mounting lock ring/jam nut, metal heat shield, electrode with 12" long wire, 90 degree bent electrode tip and 2-7/8" long white ceramic insulator with attached mounting bracket and 8" long grounding wire. Installation instructions and hardware included.
In Stock
$17.39
View
Add
Item# 80008194
"AA" Battery Electronic ignition kit for some Charbroil Commercial Series models. Includes 2-pole electronic spark generator with heat shield, main burner electrode with wire, side burner electrode, 38" wire and 2 mounting screws (Battery not included).
In Stock
$27.29
View
Add
Item# G350-0064-W1
Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire end.  IMPORTANT: This electrode only fits Charbroils 1" diameter burner tubes.
In Stock
$3.59
View
Add
Item# G409-0021-W1
Two output "AA" electronic ignition module with push button battery cap. Features 2 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Fits Charbroil Performance, Classic and Kenmore models as well as many other brands/models.
In Stock
$10.99
View
Add
Item# G409-0030-W1
Push button battery cap with spring, for "AA" electronic ignition module. The cap features a soft rubber "push button" top. The diameter at the base of the cap measures 1-1/4".
In Stock
$4.99
View
Add
Item# G501-0010-W1
Main burner electrode with insulated wire and mounting bracket. Wire terminates with a female spade connector and is 12" in length. Electrode is 4-1/8" long and tip bends 90 degrees towards the burner.  Mounting screws included.
In Stock
$4.99
View
Add
Item# G515-0014-W1
Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire end.  IMPORTANT: This electrode only fits Charbroils 1" diameter burner tubes.
In Stock
$3.59
View
Add
Item# G515-0017-W7
Charbroil Surefire ignition switch kit. Kit includes one flush mount igniter switch push button and three sets of different length wires to accommodate many different models. Two wires per set in lengths of 10", 18" and 26". Installation instructions included. Charbroil OEM part.
In Stock
$9.99
View
Add
Item# G515-0030-W1
Black plastic battery cap with internal spring, for "AA" ignition modules that have a remotely located push button switch. This is a hard cap, intended to secure the "AA" battery inside of the ignition module only. Measures 1-1/4" at the base.
In Stock
$4.99
View
Add
Item# G515-0030-W2
5 output "AA"  electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the remote ignition switch and 5 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately.  Genuine Charbroil Part.
In Stock
$17.99
View
Add
Item# G515-0067-W1
Electrode With Wire Collector For Main Burner
In Stock
$3.59
View
Add
Item# GGEIBPB
Push button battery cap for MHP "AAA" electronic ignition module. Features chrome finish with black rubber push button top. Base diameter is: 1-5/16" Includes module mounting lock ring nut.
In Stock
Retail: $7.15
$4.90
View
Add
Item# IG-17B
Stainless steel burner ignitor collector box and electrode assembly. Mounting stud length measures 2". Includes locking nuts as shown. Total length is 4" from the top to the bottom of the electrode. Wire connection at bottom takes a round connector.
In Stock
Retail: $11.00
$8.89
View
Add
Item# IG18B
20" igniter wire. Features flat female spade connectors on both ends.
In Stock
Retail: $4.05
$2.85
View
Add
Item# IG7B

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

  • (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.
In Stock
Retail: $3.70
$2.79
View
Add
Item# IGEIB2B

Universal gas grill 2 output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your 2 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Universal Electronic Ignition Module with Push Button - 2 Output 
SOLD OUT: Expected In Stock 12/6/2024
Retail: $35.20
$22.92
View
Item# IGEIB4B

Universal gas grill 4 output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your 4 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Universal Electronic Ignition Module with Push Button - 4 Output
SOLD OUT: Expected In Stock 12/6/2024
Retail: $35.20
$20.57
View
Item# 5884694
Charbroil universal grease drip cup and hanging clip. Cup measures 3-3/4" in diameter. Features an aluminum cup with a steel hanging clip.
In Stock
$5.49
View
Add
Item# 80000076
Caster socket insert for rectangular stainless steel legs. Surface dimension where the caster screws in is 1" X 2". Insert is 2-1/16" top to bottom. Accepts 7/16" threaded caster.
In Stock
$3.99
View
Add
Item# 80000096
Temperature gauge with wing-nut. Measures 1-3/4" in diameter. Guage reads 50 - 800 degrees F. Probe style with 1-1/4" probe. (Use with 2-1/4" temperature gauge bezel.)
In Stock
$8.79
View
Add
Item# G350-0024-W2
Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame. (Replaces G350-0024-W1). Genuine Charbroil Part.
In Stock
$9.99
View
Add
Item# G350-4400-W1A
Rectangular slide out grease tray. Black powder coat finish. Pan measures 10-7/8" long X 5-3/4" wide, (measurement does not include handle).
In Stock
$8.19
View
Add
Item# G416-0015-W1
7-3/4" X 4" grease pan for Charbroil Professional, Signature, Commercial Series "Tru-Infrared models" (2015-Newer), Advantage Series "Conventional" 6 burner, Signature Series "Conventional" (model years 2015-Newer) and a variety of Commercial Series conventional models.   Features a curled lip handle and 5-3/4" long side lip edges, for tray rail supports. Measures 7-3/4" long (including the handle) X 4" wide (including the lip edges).  Genuine Charbroil Part.
In Stock
$9.99
View
Add
Item# G515-0031-W1
Silver temperature guage. Reads 150 - 650 degrees. Includes wing nut for mounting. Measures 2-3/8" in diameter. Temperature probe is 2-1/4" in length.
In Stock
$9.39
View
Add
Item# G515-0082-W1
Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.
In Stock
$6.99
View
Add
Item# G516-6900-W1
Rectangular slide out grease catch pan. Gray powder coat finish. Pan measures 10-7/8" long X 5-3/4" wide, (Measurement does not include handle).
In Stock
$10.99
View
Add
Item# GGTG4
Round temperature gauge and bezel. Temperature range 50 degrees through 550 degrees.  Measures 2-1/2" in diameter. Temperature probe on the backside is 1-3/4" long.  Mounting wingnut and washer included. IMPORTANT: MHP has redesigned this temp gauge. They have improved the waterproof aspect and temperature reading accuracy. The gauge now "stands off" of the grill lid surface by approximately 1/8". The back of the gauge no longer rests flush on the grill lid surface.
In Stock
Retail: $22.55
$13.85
View
Add