Stainless steel tent shaped drip vaporiser bar. Fits Masterflame 9000 Series gas grills. Measures 29-1/4" long x 4-1/8" wide.

Ignitor wire with two round connectors. Measure 11 inches long. (NOTE: The terminal ends of the wire can be forced onto a flat spade, if needed.)

Includes the twist and lock collector box, electrode, mounting screw and connector wire. Used on 1999 and newer Masterflame burners. Instructions

20" igniter wire. Features flat female spade connectors on both ends.

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

• (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.

7000 Series porcelain coated steel burner shield/vaproizer bar. Measures 23-7/8" Long X 6-1/8" Wide.

7000 Series cooking system burner shield/drip vaporizer bar. Dimensions are 23-7/8" Long (measured at its longest points, the tips of the end mounting tabs) X 5-1/4"" Wide.  The bar length measured along the top peak is 23-3/8".

The briquet rack under the burner is not required with grills using this bar.

Stainless steel tent shaped burner shield/drip vaporiser bar, fits Masterflame 7000 Series gas grills. Measures 23-3/8 inches long X 2-9/16" wide.

Quickset 8000 Series vaporizer bar. Measures 26-1/4" X 6-1/2".

Tongue style collector box inserts under mounting clip found on many burners. Includes electrode and 20 inch connector wire which connects to "manual" pushbutton or rotary spark generator.  Burner not included, shown for display purposes only.

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

Stainless steel tent shaped drip vaporiser bar, fits Masterflame 5000 Series gas grills. Measures 19-1/4" x 2-1/2".

Swing away warming rack for Charbroil 5000 Series Grills. Surface area measures 20" X 7". Pivot rod length is 22-5/8".

13-15/16" X 24" single piece stainless steel rod cooking grid. Features solid stainless steel rod construction. Measures 13-15/16" front to back X 24" wide. Fits Charbroil/Kenmore 7000 Series grills and many other brands/models.  Replaces Charbroil OEM Part 4152739.

"Bottom" chrome warming rack for 7000 Series models. Fits 7000 Series models using single or dual/two tier swing away warming rack systems. Surface dimensions are 10-1/2" X 23-1/2". Front pivot leg measures 4-1/2" from bend to bend. Pivot rod length is 27-1/8".

10-3/4" front to back X 22-1/4" left to right metal rod "rock grate" for ceramic briquettes or lava rock. Fits "1990 and Newer" Charbroil 7000 series grills. ATTN: These grates are raw (uncoated) steel and occasionally show signs of superficial rust. They are fully functional for their intended purpose.

14-3/4" X 26-5/8" single piece stainless steel rod cooking grid. Features solid stainless steel rod construction. Measures 14-3/4" front to back X 26-5/8" wide. Fits Charbroil/Kenmore 8000 Series grills and many other brands/models.  Replaces Charbroil OEM Part 4152741.

"Top tier" of dual warming rack for 8000 Series models which feature two tiered swing away warming rack systems. Surface dimensions 24" X 8 3/4". Pivot rod length 28-3/4".  IMPORTANT: This is the top tier only.

11" front to back X 25-1/8" left to right, metal rod rock grate for ceramic briquettes or lava rock. Fits "1990 and Newer" Charbroil 8000 series grills. ATTN: These grates are raw (uncoated) steel and occasionally show signs of superficial rust. They are fully functional for their intended purpose.

Snap-In ignitor push button for units without side burners. (Single pole. Uses one wire.) Wire not included.

Snap-in 2 pole pushbutton igniter, for units with side burners. Features two wire connectors, one "round" at bottom and one "flat spade" on the side. Mounts to grill with "Snap In" tabs.

6" diameter black plastic wheel. Features a 3/8" diameter axle hole, 1-5/8" long axle hub and 1-1/2" wide tire tread. Fits a variety of Charbroil, Kenmore, Thermos and many other Brands/Models. Sold individually. Genuine Charbroil Part.

Grease drip cup and hanging clip. Cup measures 3-3/4" in diameter. The cup is aluminum with a steel hanging clip.