Stainless steel carry over tube for narrow 5/8" diameter burner. Tube channel measures 7-3/8" long (this measurement does not include the mounting tabs). Fits Charbroil Professional, Signature, Commercial, Performance Series Tru-Infrared and Signature Series "Conventional" "2 burner models", 2015 and newer.  Hardware, 2 cotter pins,included.  IMPORTANT: This carry over tube only fits Charbroils newer thin 5/8" diameter burner tubes.  Charbroil OEM Part.

Stainless steel carry over tube for narrow 5/8' diameter burner tube. Tube channel measures 6" long. (this measurement does not include the mounting tabs). Fits Charbroil Professional, Signature, Commercial Series Tru-Infrared and Signature Series "Conventional" "3 and 4 burner models". Hardware, 2 cotter pins are included.  IMPORTANT: This carry over tube only fits Charbroils newer thin 5/8" diameter burner tubes.  Charbroil OEM Part.

17-3/4" long X 5/8" diameter stainless steel main burner tube. Fits Charbroil Signature "Conventional" (Not Tru-Infrared) Series, 2, 3 and 4 burner models. "Model years 2015 and newer". 5/8" OD tube features vented venturi end, 90 degree bend with centered slotted mounting hole at the back end, carryover tube mounting stud screw with cotter pin clip and air mixture adjustment screw. Sold individually, more than one required. Charbroil OEM Part.

Burner rear support brace for 5/8" diameter main burner tubes, Charbroil Professional, Signature, Commercial and Performance Series "model years 2015 and Newer". (Tru-Infrared and Conventional).  "L" shaped brace is 1-5/8" wide and features two mounting bolt holes and vertical burner mounting tab.  Designed to support Charbroil 5/8" diameter burner tubes.  Hardware, (2 ea.) bolts, nuts and washers, included.

Stainless steel vented heat tent. Fits Charbroil Signature Series "Conventional" (Not Tru-Infrared) 2, 3, and 4 burner models (2015 and newer). Measures 17" long, across the bottom edge X 2-1/8" wide at the base. Sold individually, more than one required. Important: Please measure your exisitng parts to assure fit. Genuine Charbroil Part.

Stainless steel rod cooking grate. Solid 1/4" diameter stainless steel rod construction. Measures 18-1/8" long X 6-5/8" wide. Fits Charbroil Signature Series 3 burner "Conventional" (not Tru-Infrared) models, as well as many other brands/models. Features a "finger notch" for easy installation and removal.  Sold individually.  Genuine Charbroil Part.

Stainless steel rod cooking grate. Solid 1/4" diameter stainless steel rod construction. Measures 18-1/8" long X 9-3/8" wide. Fits Charbroil Signature Series "Conventional" (not Tru-Infrared) 2, 3 and 4 burner models. As well as many other brands/models. Features a "finger notch" for easy installation and removal.  Sold individually. Genuine Charbroil Part.

Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame. (Replaces G350-0024-W1). Genuine Charbroil Part.

Bezel for gas control knob. Measures 3-1/8" in diameter and features "High to Low" graphics. Fits Charbroil Advantage and Signature Series "Conventional" 2 burner models (2015-Newer) and Professional, Commercial and Performance Series "Tru-Infrared" models. Mounting hardware, 2 screws and lock washers, included.

Caster socket insert for rectangular steel tube legs. Surface dimension where the caster screws in is 1" X 2". Insert is 2-1/16" top to bottom. Accepts 7/16" threaded caster.

Locking ball bearing swivel caster with 2-7/8" diameter wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame construction. Attaches to leg frame with heavy gauge steel box flange. Fits a variety of Charbroil Professional, Signature, Commercial Series "Tru-Infrared" and Signature "Conventional" Series models (2015 and Newer).  Genuine Charbroil Part.

Non-locking ball bearing swivel caster with 2-7/8" diameter wheel. Sturdy steel frame construction. Attaches to leg frame with heavy gauge steel box flange.  Fits a variety of Charbroil Professional, Signature, Commercial Series "Tru-Infrared" and Signature Series "Conventional" models (2015 and Newer).  Genuine Charbroil Part.

Black plastic gas control knob for Charbroil Professional, Commercial, Signature, Performance Series "Tru-Infrared" and Signature Series "Conventional" models (2015 and Newer). Measures 2" in diameter and fits standard 1/4" "D" shaped valve stem. Features chrome top with Charbroil logo in black.

Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

2 output "AA" electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the ignition switch and 2 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately.  Genuine Charbroil Part.

Electrode (for narrow 5/8" diameter burner tube) with 20" long wire for Charbroil Professional, Signature, Commercial Series "Tru-Infrared" 3 and 4 burner models and Advantage/Signature Series "Conventional" 2, 3 and 4 burner models, "2015 and newer".  Features gas collector box/electrode with burner mounting spring clamp and a 3" white ceramic electrode insulator with a 20" long molded in wire. The wire terminates with a female spade fitting.  IMPORTANT: This electrode only fits Charbroils newer thin 5/8" diameter burner tubes.

4 output "AA" electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the ignition switch and 4 output terminals for the electrodes. IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately. Genuine Charbroil Part.

Charbroil Surefire ignition switch kit. Kit includes one flush mount igniter switch push button and three sets of different length wires to accommodate many different models. Two wires per set in lengths of 10", 18" and 26". Installation instructions included. Charbroil OEM part.

Black plastic battery cap with internal spring, for "AA" ignition modules that have a remotely located push button switch. This is a hard cap, intended to secure the "AA" battery inside of the ignition module only. Measures 1-1/4" at the base.

5 output "AA"  electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the remote ignition switch and 5 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately.  Genuine Charbroil Part.

7-3/4" X 4" grease pan for Charbroil Professional, Signature, Commercial Series "Tru-Infrared models" (2015-Newer), Advantage Series "Conventional" 6 burner, Signature Series "Conventional" (model years 2015-Newer) and a variety of Commercial Series conventional models.   Features a curled lip handle and 5-3/4" long side lip edges, for tray rail supports. Measures 7-3/4" long (including the handle) X 4" wide (including the lip edges).  Genuine Charbroil Part.

Round temperature gauge with 1-3/8" long temp probe. Fits Charbroil Professional, Signature, Commercial Series "Tru-Infrared" and Signature Series "Conventional" models, 2015 and newer.  Dial face measures 2-3/8" in diameter and has a temperature range of 150 to 650 degrees. Mounting wing nut included.  Genuine Charbroil Part.