CharBroil Thermos Grill Parts

Char-Broil Thermos Grill Parts
Char-broil Thermos gas grill parts

External appearance may vary between Grill Models

Char-Broil Thermos replacement gas grill parts at warehouse discount pricing.

Low prices. Quick, same-day shipping. Order today!

Grillparts.com stocks top-quality OEM and exact-fit grill parts for your Char-Broil Thermos model gas grill.

We stock a large inventory of Thermos Gas Grill parts for those Thermos grill models manufactured by W.C. Bradley Co./Char-Broil.

A fine-tuned Char-broil Grill makes your cookouts better! Char-Broil grills are easy-to-fix with new parts from grillparts.com. Install new Char-Broil THERMOS Brand grill parts and bring back your grilling confidence and pleasure.

We've been shipping Char-Broil parts to backyard chefs since 1996.

Scroll down to view our parts listing for your Char-Broil Thermos grill and order today.



Carefully measure and compare the photos of the parts you are replacing to assure they are correct for your model.

Item# 29001797
Meat thermometer. Specifically used with Charbroil Infrared Roasters. Can be used independently. Features a 2-1/8" diameter dial face and a 5" long temperature probe. Genuine Charbroil Part.
In Stock
Retail: $9.99
$9.29
View
Item# 29101337
"Silver/Gray" grease tray for Charbroil Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker. Measures 12-3/8" long (not including handle) X 6-7/8" wide. Features a curved face with handle and high heat resistant powder coat finish. Genuine Charbroil Part.
In Stock
$8.69
View
Item# 4153184
Big Easy main ignitor wire. 15" long with round connector at wire end and flat connector at ceramic end.
SOLD OUT: Expected In Stock 7/31/2024
$3.99
View
Item# 4153713
Snap-In ignitor push button for units without side burners. (Single pole. Uses one wire.) Wire not included.
In Stock
$5.99
View
Item# 4153720
Ignitor wire with two round connectors. Measure 11 inches long. (NOTE: The terminal ends of the wire can be forced onto a flat spade, if needed.)
In Stock
Retail: $0.58
$3.39
View
Item# 4156417
Stainless steel tent shaped burner shield/drip vaporiser bar, fits Masterflame 7000 Series gas grills. Measures 23-3/8 inches long X 2-9/16" wide.
In Stock
$14.19
View
Item# 4156449
"Top tier" of dual warming rack for 8000 Series models which feature two tiered swing away warming rack systems. Surface dimensions 24" X 8 3/4". Pivot rod length 28-3/4".  IMPORTANT: This is the top tier only.
In Stock
$15.23
View
Item# 4156956
6" diameter black plastic wheel. Features a 3/8" diameter axle hole, 1-5/8" long axle hub and 1-1/2" wide tire tread. Fits a variety of Charbroil, Kenmore, Thermos and many other Brands/Models. Sold individually. Genuine Charbroil Part.
In Stock
$4.99
View
Item# 4500226
Burner tent for Char-broil "Big Easy" model grills. Stamped steel vented tent measures 6" X 6". Sold individually, more than one required.
In Stock
$9.69
View
Item# 4500228
Burner crossover tube. Carries the flame across to the adjacent burner. Tube length is 8-3/8" end to end. Burners not included and shown for display only. This part is used with Big Easy three-burner grills. Sold by each. More than one may be needed.
In Stock
$4.29
View
Item# 4505008
Top ported Masterflame 2-1/4" X 17" stainless burner assembly. Venturi tube spacing is 2-3/8" center to center and tube reach is 6-1/4". Fits 1999 to present 7000 Series models.
SOLD OUT: Expected In Stock 7/24/2024
$20.67
View
Item# 5068016
Round burner used in sets of two or three depending on grill model. Ignitor electrode is mounted on the rear of the burner. Fits Big Easy and some Traditional models. Tube length is 7-5/8" out from the center of the burner.
In Stock
$16.38
View
Item# 5156113
"Snap-in" 2 pole pushbutton igniter. Features two wire connectors, one "round" at bottom and one "flat spade" on the side. Mounts to grill with "Snap In" tabs.
In Stock
$7.79
View
Item# 5156119
Ignitor electrode. This electrode mounts to the bottom of the collector box and connects to the pushbutton wire.
In Stock
$5.69
View
Item# 55710187
16" diameter "circular" stainless steel tube burner. Measures 16" from outside edge to outside edge. Features an insect screen at the valve opening. Includes 4 mounting bracket/tabs. Fits Charbroil Big Easy Tru-Infrared Turkey Fryer/Roaster and Smoker Cooker. Genuine Charbroil Part.
In Stock
$15.59
View
Item# 55710188
16" diameter "round" heat shield for Charbroil Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker (SRG). Genuine Charbroil Part.
In Stock
$9.99
View
Item# 80000268
Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.
In Stock
$6.99
View
Item# 80000270
Grease Drip Cup and clip
In Stock
$5.49
View
Item# 80000653
Kit includes a 2-pole "AA" electronic spark generator (where there are two wire connections on the back side), spark box with electrode and additional hookup wire. Battery not included.
In Stock
$14.59
View
Item# 80001449
Heavy duty cast iron replacement burner. Burner dimensions are 2-1/4" wide X 13-3/4" including the bottom side venturi tube length. Includes pin clip.
In Stock
$21.55
View
Item# 80003332

PART NO LONGER AVAILABLE, SEE 80029723

Burner shield or "Flame Tamer". Porcelain Coated. Measures 3-3/4" width X 16" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.

In Stock
$9.99
View
Item# 80003584
Rectangular slide out grease tray with wire handle. Grey powder coat finish. Pan measures 5-3/4" wide X 11" front to back (not including handle).
In Stock
$8.19
View
Item# 80004343
Push button battery cap, with spring, for "AA" electronic ignition module. The cap features a soft rubber "push button" top. The diameter at the base of the cap measures 1-1/4".
In Stock
$4.59
View
Item# 80005592
This  4-5/8" carryover tube mounts between the burners to carry flame and ignition over to the adjacent burner. Designed to fit Charbroil 1" diameter main burner tubes that require a "screw mounted" carryover channel.  The tube channel measures 4-5/8" long.  (This measurement is the tube length only, does not include the mounting tabs).   Genuine Charbroil Part.
In Stock
$6.49
View
Item# 80005724
Heavy duty two piece porcelain coated cast iron cook grid set. Each section measures 18-1/2" X 13-1/8" for a combined size of 18-1/2" X 26-1/4".
In Stock
$89.34
View
Item# 80012481
Adjustable burner bracket with stainless carryover channels, for 3 burner models. Adjusts 23-1/2" to 25". Includes 2 tube extension channels, 2 bar extensions, 2 angled extensions for brackets ending at an angle, hardware and instructions. Fits burners up to 2-5/8" wide.
In Stock
$16.99
View
Item# 80013421
15-7/8" long stainless steel tube burner. Narrow end which connects to the valve includes wire mesh spider guards. IMPORTANT: This burner uses a "screw" mounted style carry over tube.
In Stock
$11.99
View
Item# 80065455
Heavy duty two piece porcelain coated cast iron cook grid set. Each section measures 18-1/2" X 13-1/8" for a combined size of 18-1/2" X 26-1/4". Black matte porcelain finish.
In Stock
$89.34
View
Item# G437-0037-W1
7" diameter black plastic wheel. Features a 5/16" diameter axle hole, 1-3/4" long axle hub and 1-7/8" wide tire tread. Fits a variety of Charbroil, Kenmore and many other Brands/Models.  Sold individually.  Genuine Charbroil Part.
In Stock
$5.99
View
Item# G517-0800-W1
4-5/8" Deep Char-Broil RED radiant trough. Measures 17-1/2" front to back X 25-3/4" wide and is 4-5/8" deep (measured from the side edge).  Fits some models that use a "single" full width trough design. Features round peg style mounting legs.
In Stock
$38.99
View
Item# P2056A
Cast iron burner. Porcelain coated flat finish. Fits Commercial Series grills manufactured in 2002 - 2003. Burner length including venturi tube 15-1/4". Width 3-1/2".
In Stock
$23.79
View