Stainless steel carryover tube. Tube channel measures 6-5/8" long. (This measurement does not include the mounting tabs). Includes 2 cotter pins.  Designed to fit Charbroil 1" diameter burner tube.

15-7/8" long X 1" diameter stainless steel tube burner. Features indentations for clamp-on style igniter. The mounting flange end has a short 90 degree bend with a centered "slotted" mounting hole. Crossover stud screw located at back end of tube. Crossover tube mounting hardware included(2 cotter pins and 1 stud screw).

Stainless steel carryover tube. Tube channel measures 5-1/2" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins.  Designed to fit Charbroil 1" diameter burner tube.

16" long X 3-3/4" wide porcelain coated steel flame tamer. Features two raised mounting tabs at each end. Replaces older part numbers G501-0008-W1, 80006357 and 80003332. Genuine Charbroil Part.

Two section stainless steel cooking grate and emitter tray set. Includes 2 grates that measure 17" long X 8-1/2" wide (part ICG6613) and 2 emitter trays that measure 18-3/8" X 8-3/4" wide (part IET8898). Measurement of each section with grate in tray is 8-3/4" wide X 18-3/8" front to back. Total set width is 17-1/2".  Fits many Pre-2015 Charbroil Tru-Infrared 2 Burner Models.

Three section stainless steel cooking grate and emitter tray set. Includes 3 grates(part ICG6613) and 3 trays(part IET8898). Measurement of each section with grate in tray is 18-3/8" front to back X 8-3/4" wide. Total set width is 26-1/4". Fits many Pre-2015 Charbroil Tru-Infrared 3 Burner Models.

Four section stainless steel cooking grate and emitter tray set. Includes 4 grates that measure 17" long X 7-1/2" wide (part ICG2121) and 4 emitter trays that measure  18-3/8" long X 7-5/8" wide (part IET5532). Measurement of each section with grate in tray is 7-5/8" wide X 18-3/8" front to back.  Total set width is 30-1/2".  Fits many Pre-2015 Charbroil Tru-Infrared 4 Burner Models.

Stamped stainless steel cooking grate set. Set includes 4 grate sections. Individual measurements of the sections are 7-3/4" wide X 18-3/8" front to back. Total width is 31".

Stamped stainless steel 2 piece "Infrared" cooking grate set. Includes 2 grate sections. Each section measures 8-3/4" wide X 18-3/8" front to back. Total set width is 17-1/2". These grates feature "slotted" grease drain holes for improved performance.

Stamped stainless steel 3 piece "Infrared" cooking grate set. Includes 3 grate sections. Each section measures 8-3/4" wide X 18-3/8" front to back. Total set width is 26-1/4". These grates feature "slotted" grease drain holes for improved performance.

Heavy duty 3 piece, matte finish cast iron cooking grate set. Each piece measures 18-1/8" front to back X 9 7/8" wide for a total set width of 29-5/8". Features side edge finger notches for easy installation and removal.

Heavy duty 2 piece, matte finish cast iron cook grate set. Each grate measures 18-5/16" front to back X 13-1/8" wide. Total measurement is 18-5/16" X 26-1/4".

Stainless steel Tru-Infrared emitter grate (cooking grate bottom perforated piece). Measures 18-3/8" front to back X 8-7/8" wide. This emitter grate is designed to pair with a cast iron cooking grate top piece, part #CG111PCI (sold separately). This is the emitter grate only. Fits a variety of "2" and "3" Burner Charbroil Tru-Infrared models, pre 2015. More than one required, sold individually. IMPORTANT: Please measure your old parts to assure fit. Replaces OEM Part 80021356.

Stainless steel Tru-Infrared emitter grate (cooking grate bottom perforated piece).  Measures 7-5/8" wide X 18-3/8" front to back. This emitter grate is designed to pair with a cast iron cooking grate top piece, part # 80021357 (sold separately). This is the emitter grate only. Fits a variety of "4" Burner Charbroil Tru-Infrared models, pre 2015. More than one required, sold individually. IMPORTANT: Please measure your old parts to assure fit.  Replaces OEM Part 80021358.

Stainless steel Tru-Infrared cooking grate "emitter tray" (bottom perforated piece). Measures 18-3/8" front to back X 7-5/8" wide. Fits a variety of Charbroil Tru-Infrared "4" burner models, pre 2015. This housing tray is designed to pair with a 7-1/2" wide cooking grate, see part ICG2121 (sold separately). IMPORTANT: Please measure your old parts to assure fit. This is the "emitter tray" only. More than one required, sold individually. Replaces Charbroil OEM Part 3485532.

Stainless steel Tru-Infrared cooking grate "emitter tray" (bottom perforated piece). Measures 18-3/8" front to back X 8-3/4" wide. Fits a variety of Charbroil Tru-Infrared "2 and 3" burner models, pre 2015. This housing tray is designed to pair with a 8-1/2" wide stainless steel cooking grate, see part ICG6613 (sold separately). IMPORTANT: Please measure your old parts to assure fit. This is the "emitter tray" only. More than one required, sold individually. Replaces Charbroil OEM Part 3488898.

Infrared cast iron cooking grate "top piece". Measures 7-1/8" wide X 18-1/4" front to back. This grate is designed to fit onto a matching emitter tray, part # CG113SS (sold separately). This is the cast iron grate only. More than one required, sold individually. Fits a variety of Charbroil "4" Burner Tru-Infrared models, pre 2015. IMPORTANT: Please measure your old parts to assure fit before ordering. Charbroil Original Equipment. (Note: Emitter grate is not included; it is shown for display purposes only.)

Infrared cast iron cooking grate "top piece". Measures 8-1/4" wide X 18-1/4" front to back. This grate is designed to fit onto a matching emitter tray, part # CG111SS (sold separately). This is the cast iron grate only. More than one required, sold individually. Fits a variety of Charbroil "2 and 3" Burner Tru-Infrared models, pre 2015. IMPORTANT: Please measure your old parts to assure fit. Replaces Charbroil OEM Part 80021355.

Stamped stainless steel cooking grate. Measures 8-3/4" wide X 18-3/8" long. Features "slotted" grease drain holes for improved performance. Fits many 2 and 3 burner Charbroil Infrared models. More than one required. Also available in 2 and 3 piece sets, see parts CG97SS-2 and CG97SS-3.

17" X 8-5/8" porcelain coated Charbroil Infrared precision flame cooking grate. Measures 17" front to back X 8-5/8" wide. Fits a variety of 2015 and newer, 2 and 3 burner Charbroil Tru-Infrared 300, 450 and Performance models. More than one required, sold individually.

Infrared perforated stainless steel cooking grate. Measures 8-3/4" wide X 18-3/8" front to back. More than one required, sold individually. Original Charbroil Equipment.

Infrared perforated stainless steel cooking grate. Measures 7-3/4" wide X 18-3/8" front to back. More than one required, sold individually. Original Charbroil Equipment.

Stainless steel infrared cooking grate. Measures 17" front to back X 7-1/2" wide. This grate is designed to pair with a housing emitter tray, see part IET5532 (sold separately). This is the cooking grate only. Fits a variety of Charbroil "4" Burner Tru-Infrared models, pre 2015. IMPORTANT: Please measure your old parts for accuracy More than one required, sold individually. Replaces Charbroil OEM Part 3482121.

Stainless steel Charbroil Tru-Infrared cooking grate. Measures 17" front to back X 8-1/2" wide. This grate is designed to pair with a housing emitter tray, see part # IET8898 (sold separately). This is the "cooking grate" only. Fits a variety of "2 and 3" Burner Charbroil Tru-Infrared models, pre 2015. IMPORTANT: Please measure your old parts for accuracy. More than one required, sold individually. Replaces Charbroil OEM Part 3486613.

Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame. (Replaces G350-0024-W1). Genuine Charbroil Part.

Caster socket insert for rectangular steel tube legs. Surface dimension where the caster screws in is 1" X 2". Insert is 2-1/16" top to bottom. Accepts 7/16" threaded caster.

Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.

Control knob bezel with infinite range graphics. Measures 3-1/8" in diameter. Features 2 elongated vertical (bottom hole cut horizontally) and 2 large round horizontal mounting holes. Hardware included (2 screws and 2 lock washers).  Replaces parts G515-0065-W1 and G519-0064-W1.  Genuine Charbroil Part.

Black plastic gas control knob with chrome grip. Measures 2" in diameter. The knob mounting hole fits a 3/16" valve stem.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

2 output "AA" electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the ignition switch and 2 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately.  Genuine Charbroil Part.

Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire end.  IMPORTANT: This electrode only fits Charbroils 1" diameter burner tubes.

4 output "AA" electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the ignition switch and 4 output terminals for the electrodes. IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately. Genuine Charbroil Part.

Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire end.  IMPORTANT: This electrode only fits Charbroils 1" diameter burner tubes.

Charbroil Surefire ignition switch kit. Kit includes one flush mount igniter switch push button and three sets of different length wires to accommodate many different models. Two wires per set in lengths of 10", 18" and 26". Installation instructions included. Charbroil OEM part.

Black plastic battery cap with internal spring, for "AA" ignition modules that have a remotely located push button switch. This is a hard cap, intended to secure the "AA" battery inside of the ignition module only. Measures 1-1/4" at the base.

5 output "AA"  electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the remote ignition switch and 5 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately.  Genuine Charbroil Part.

Rectangular slide out grease tray. Black powder coat finish. Pan measures 10-7/8" long X 5-3/4" wide, (measurement does not include handle).

Charbroil "top rounded" semi-circular temperature gauge. Measures 1-7/8" across bottom diameter. Features a 2-7/8" long rear temperature probe and a dial face range of 0-700 degrees.

Left and right side support rails for slide out grease tray. Each measures 19-1/4" long (measurement includes both mounting tabs).

Rectangular slide out grease tray. Grey powder coat finish. Pan measures 10-7/8" long X 5-3/4" wide, (measurement does not include handle).

Rectangular slide out grease catch pan. Gray powder coat finish. Pan measures 10-7/8" long X 5-3/4" wide, (Measurement does not include handle).