Stainless steel 6" diameter round burner for Charbroil Patio Bistro Tru-Infrared grills. Features a single curved venturi tube with 8-5/8" reach and 2 welded on mounting brackets. Charbroil OEM Part.

Stainless steel 4" diameter round burner for "PORTABLE" Patio Bistro Tru-Infrared models. Features tri-pod style mounting/support legs and a single curved venturi tube with 4-3/4" reach.  Male threaded heat tent mounting post and electrode shield attached. Mounting leg hardware, 3 screws included.

Chrome warming rack for Charbroil Patio Bistro grills. Measures 6-1/4" deep by 15-1/4" long. Features one half rounded side design with four 90 degree bend mounting pegs (2 upward and 2 downward). Genuine Charbroil Part.

Round stainless steel "Infrared" cooking grate for Charbroil Patio Bistro Tru-Infrared "gas" models". Measures 17-1/2" in diameter. Charbroil OEM Part.  IMPORTANT: This grate does "not" fit the "electric" Patio Bistro.

Round porcelain coated steel "Tru-Infrared" cooking grate. Fits many Charbroil "Electric" Patio Bistro models. The diameter of the cooking surface measures 17-1/4" and the diameter of the bottom ring collar is 16-7/8".  Charbroil OEM Part. IMPORTANT: This grate does "not" fit the Patio Bistro gas models.

Round stainless steel "Infrared" cooking grate for Charbroil "PORTABLE" Patio Bistro Tru-Infrared "gas models". Measures 15-1/4" in diameter. Charbroil OEM Part.  IMPORTANT: This grate does "not" fit the "electric" Portable Patio Bistro.

Temperature controller. Fits many Charbroil "Electric" Patio Bistro models. Features a 7 foot long power cord, controller with all necessary wire connectors and control knob "stem". (Control knob is "not" included, see part 29105060). Genuine Charbroil Part.

Heating element. Fits Charbroil "Electric" Patio Bistro model numbers: 17602060, 17602061 and 17602062. Measures 15" X 13". Features 3 mounting stud screws and 2 power cord connection stud screws with connection hardware. Genuine Charbroil Part.

Heating element. Fits Charbroil "Electric" Patio Bistro model numbers: 17602066, 17602047 and 17602048. Measures 15" X 13". Features 3 mounting stud screws and 2 power cord connection stud screws with connection hardware. Genuine Charbroil Part.

Gray arched plastic handle for Patio Bistro Tru-Infrared models. Handle measures 11-7/8" wide X 7" deep. Center to center dimension between the mounting screw holes measures 10-3/4". Mounting hardware is "not" included. Charbroil OEM Part.

6" black plastic wheel. Fits Charbroil Patio Bistro Tru-Infrared models.  Attractive spoke wheel design with 3/8" diameter axle hole. IMPORTANT: the axle hub measures 1-1/2" wide. Charbroil OEM Part.

Silver plastic hubcap for Charbroil Patio Bistro Tru-Infrared models. Measures 4-3/4" in diameter and has 3 mounting tabs on the back side.  IMPORTANT: This hubcap only fits the version of wheel part 29101999 that has the 3 holes for the mounting tabs on the cap.  Charbroil OEM Part.

Plastic control knob with chrome front and soft rubber grip. Factory sub for part number 7000309. Fits a variety of Performance/Advantage Series and Patio Bistro Tru-Infrared models. Measures 2-3/8" in diameter.

2-1/8" diameter knob with 3-1/8" diameter bezel for temperature controller.  Fits many Charbroil "Electric" Patio Bistro models. Black plastic knob with a chrome top features Charbroils flame emblem graphic. 3-1/8" wide bezel features Off and Hi to Low temperature range graphics.  Genuine Charbroil Part.

LED lighted control knob bezel ring. Fits many Charbroil "Electric" Patio Bistro models.  Measures 3-1/4" in diameter. Features a 3-1/2" long insulated dual wire harness with a female pin terminal end. Mounts securely underneath the control knob bezel, see part 55711041 (sold separately).  Genuine Charbroil Part.

Gray arched plastic handle for Charbroil "PORTABLE" Patio Bistro Tru-Infrared models. Handle measures 10-1/4" wide X 6" deep. Center to center dimension between the mounting screw holes measures 9". Mounting hardware, 2 screws and 2 washers, included.

Control knob bezel with "Off/High-Low Increment" graphics. Fits many Charbroil "Electric" Patio Bistro models. Measures 3-1/16" in diameter. Features 2 positioning slots and 4 mounting screw holes. Mounting hardware (4 screws) included. Genuine Charbroil Part.

6" diameter black plastic wheel. Fits many Charbroil "Electric" Patio Bistro models. Features attractive spoke wheel design, 3/8" diameter axle hole and 1-3/4" wide tread width. Genuine Charbroil Part.

Heat shield, fits many Charbroil "Electric" Patio Bistro models. Measures 17-1/2" in diameter X 4" deep. Features a center drain opening and 3 threaded mounting hole grommets. Genuine Charbroil Part.

Round inner reflector.  Fits many Charbroil "Electric" Patio Bistro models. Measures 17-1/2" in diameter and 5-3/4" deep. Features center drain hole opening, rim cut-out for element and 3 mounting tabs. Genuine Charbroil Part.

Porcelain enameled round heat tent for Charbroil Patio Bistro Tru-Infrared models. Measures 8-7/8" in diameter. Features tri-pod style, three mounting leg supports. Charbroil OEM Part.

Porcelain enameled round heat tent for Charbroil "PORTABLE" Patio Bistro Tru-Infrared models. Measures 5-1/2" in diameter. Features interior threaded post for mounting to burner.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

14" long propane hose, valve and regulator assembly for Charbroil Patio Bistro Tru-Infrared models. Includes regulator with large hand nut to fit common standard size propane tanks, control valve with mounting bracket and orifice. Charbroil OEM Part.

Adapter hose allows for a full size propane tank to be used with your portable gill. The large green knob connects to the full size tank and the small brass fitting end attaches to your grill, in the same manner as the small propane bottle. Measures 6 feet long.

Hose, valve and regulator assembly for Charbroil "PORTABLE" Patio Bistro Tru-Infrared models. Includes control valve with mounting bracket, orifice, propane regulator with mounting bracket and threaded L/P cylinder mount. (The threaded cylinder mount also allows for the use of a full size propane tank adapter hose, see part 41455, sold separately).  This assembly also includes two steel flex gas hoses, one 20" long runs from the regulator to the control valve and the other 3-3/4" long runs from the control valve to the orifice.  Control valve mounting screws (2) included. Charbroil OEM Part.

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

Single output "AAA" ignition module with battery spring/cap and lock nut for Charbroil Patio Bistro Tru-Infrared models. Features 3 terminals on the back side, 2 for the ignition switch wires and one output terminal for the igniter electrode.  IMPORTANT: This module requires a remote switch, see part 55710881 or 55710874 (Portable Model Only), sold separately.  Genuine Charbroil OEM Part.

Burner igniter electrode for Charbroil Patio Bistro, Tru-Infrared models. Features "L" shaped electrode with attached mounting bracket and male spade wire terminal. Charbroil OEM Part.

7-1/2" long electrode wire for Charbroil Patio Bistro, Tru-Infrared models. Wire has female spade fittings on each end and is designed to connect the burner ignition electrode to the ignition module. Charbroil OEM Part.

Burner electrode for Charbroil "PORTABLE" Patio Bistro Tru-Infrared models. Features "L" shaped electrode with molded in 8" wire and mounting bracket attached. Wire terminates with a female spade fitting. Mounting hardware, one screw, included.

Igniter push button switch with lock nut. Fits Charbroil "PORTABLE" Patio Bistro Tru-Infrared models. Includes two 21" long connecting wires with female spade connector ends. Charbroil OEM Part.

Igniter push button switch with lock nut. Fits Charbroil Patio Bistro Tru-Infrared models. Includes two 17" long connecting wires with female spade connector ends. Charbroil OEM Part.

20" igniter wire. Features flat female spade connectors on both ends.

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

• (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.

Powder coated steel grease tray for Charbroil Patio Bistro Tru-Infrared models.   Features a curled lip handle. This grease tray measures 6-3/4" long (including handle) X 4-1/4" wide.  Charbroil OEM Part.

Powder coated steel grease tray for "PORTABLE" Patio Bistro Tru-Infrared models. Features curled lip handle. Measures 6-3/8" long(including handle) X 5-3/8" wide.

Temperature gauge bezel with Charbroil Logo for Patio Bistro Tru-Infrared models. Measures 3-1/2" wide X 4" tall. Charbroil OEM Part.

Bottom grease tray for the Charbroil "Electric" Patio Bistro.  Measures 11-7/8" long X 7-3/4" wide.  Features indented finger grip handle on the front end and mounting rail supports on each side.  IMPORTANT: This part fits the "electric" Patio Bistro only, it does not fit gas models.  Fits models, 17602066, 17602047, 17602048, 17602060, 17602061 and 17602062. Genuine Charbroil Part.

Temperature gauge for Charbroils "Electric" Patio Bistro models. Measures 2-3/8" in diameter. Features a dial face temp range of 150-550 degrees and has a 1-3/8" long temperature probe.  Mounting wing nut included. Genuine Charbroil Part. Replaces Part 55710975.

Round temperature gauge with 1-1/4" long temp probe. Fits Charbroil Patio Bistro Tru-Infrared models. Dial face measures 2-3/8" in diameter and has a temperature range of 150 to 650 degrees.  The temperature probe is 1-1/4" long.  Mounting wing nut included. Genuine Charbroil Part. (Replaces part 29103484)