Char-Broil RED® Grill Parts

grill parts: Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.)
 Char-Broil RED grill parts: Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.) (image #1)  Char-Broil RED grill parts: Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.) (image #2)  Char-Broil RED grill parts: Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.) (image #3)

Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.)

Item# RGB
This part is in stock. IN STOCK
Retail: $11.35
$7.95

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

  • Qty:
Item# 80016159
Stainless steel burner assembly. Burner measures 7-1/2" long and the center gas supply tube drops down 3". More than one required and sold by each.
In Stock
$12.99
View
Add
Item# G511-2900-W1
Stainless steel burner assembly. Burner measures 9" long and the center gas supply tube drops down 2-1/8". More than one required and sold by each.
In Stock
$11.99
View
Add
Item# G517-0500-W1
Stainless steel Char-Broil RED burner assembly. Burner measures 8-1/8" long and the center drop down tube measures 2". More than one required and sold by each.
In Stock
$11.99
View
Add
Item# G517-7300-W1
15-7/8" long X 1" diameter stainless steel tube burner. Features indentations for clamp-on style igniter. The mounting flange end has a short 90 degree bend with a centered "slotted" mounting hole. Crossover stud located at mid-tube. Crossover tube mounting hardware included (2 cotter pins and 1 stud screw).
In Stock
$10.99
View
Add
Item# G524-0036-W1
Stainless steel carryover tube. Tube channel measures 5-1/2" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins.  Designed to fit Charbroil 1" diameter burner tube.
In Stock
$5.49
View
Add
Item# G616-2500-W1
Stainless steel burner assembly. Burner measures 7-1/2" long and the center gas supply tube drops down 2-1/8" (measured from underside of burner tube). More than one required and sold individually.
In Stock
Retail: $12.99
$12.99
View
Add
Item# 66123
Porcelain-enameled "gloss finish" cast iron cooking grate "3 piece set". Each section measures 16-7/8" front to back X 8-1/4" wide. For a total set width of 24-3/4". Features "finger notch" on all sides for easy installation and removal. Fits many Charbroil Red and Gourmet Infrared models. Also fits some Kenmore grills.
In Stock
Retail: $152.26
$72.63
View
Add
Item# 68744
Heavy duty, 4 piece porcelain coated cast iron cooking grate set with "gloss finish". Each section measures 7-1/8" wide x 16-7/8" front to back, for a total set width of 28-1/2". Features "finger notch" on each edge for easy installation and removal. Fits many Charbroil "Red" and "Gourmet Series" Infrared, 4 burner models.
In Stock
Retail: $219.02
$99.72
View
Add
Item# 69563
Heavy duty, 3 piece porcelain coated cast iron cooking grate set with "gloss finish". Each section measures 9" wide x 16-7/8" front to back, for a total set width of 27". Features "finger notch" on each edge for easy installation and removal. Fits many Charbroil Red 3 burner models.
In Stock
Retail: $218.18
$99.61
View
Add
Item# CG74PCI
Single piece,porcelain coated "matte finish" cast iron cooking grate. Measures 16-7/8" front to back X 8-1/4" wide. Features "finger notch" on the sides for easy installation and removal. Fits a variety of Charbroil, Kenmore and many other brand/models. more than one required.
In Stock
Retail: $40.70
$29.79
View
Add
Item# CG74PCI-3
3 piece Porcelain-enameled "matte finish" (non-gloss) cast iron cooking grate set. Each section measures 16-7/8" front to back X 8-1/4" wide. For a total set width of 24-3/4". Features "finger notch" on all sides for easy installation and removal. Fits many Charbroil Red and Gourmet Infrared models, Master Forge, Kenmore and many other brands/models. 
In Stock
Retail: $122.10
$88.99
View
Add
Item# G517-0014-W1
Heavy duty porcelain coated cast iron cooking grate. Measures 8-3/8" wide x 16-7/8" front to back. Features the Char-Broil logo insignia in the center of the grate and "finger notches" on each side for easy removal and placement. More than one required, sold individually. Charbroil Original Equipment.
In Stock
$42.99
View
Add
Item# G521-0020-W1
Heavy duty porcelain coated cast iron cooking grate. Measures 7-1/8" wide X 16-7/8" front to back. Features the Char-Broil logo insignia in the center of the grate "finger notch" on each side for easy removal and placement. More than one required, sold individually. Charbroil Original Equipment.
In Stock
$26.33
View
Add
Item# G350-0024-W2
Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame. (Replaces G350-0024-W1). Genuine Charbroil Part.
In Stock
$9.99
View
Add
Item# G408-0036-W1
Caster socket insert for rectangular steel tube legs. Surface dimension where the caster screws in is 1" X 2". Insert is 2-1/16" top to bottom. Accepts 7/16" threaded caster.
In Stock
$3.99
View
Add
Item# G501-0031-W1
Control knob bezel. Measures 3-1/8" in diameter. Features 2 elongated vertical and 2 large round horizontal mounting holes. Hardware included (2 screws and 2 lock washers).
In Stock
$3.89
View
Add
Item# G511-0010-W1
Chrome plated plastic gas control knob with sloped grip. Measures 2" in diameter.
In Stock
$5.99
View
Add
Item# G515-0082-W1
Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.
In Stock
$6.99
View
Add
Item# 100700-168

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

  • (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.
In Stock
$76.99
View
Add
Item# 104007

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

  • 1 On/Off Ball Valve Quick Connect Fitting
  • Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.
In Stock
$32.99
View
Add
Item# 104406

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 3/8" Gas Line Quick Connect Fitting
In Stock
$23.34
View
Add
Item# 106238-30

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

  • 2-Stage Regulator and 30in. Hose Assembly which includes:
  • 3/8in. ID high pressure hose, 30in. length.
  • 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
  • One 3/8in. to 3/4in. brass adapter included.  
In Stock
$49.99
View
Add
Item# 3090

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

  • This timer accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3090-01

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.
In Stock
Retail: $20.00
$18.00
View
Add
Item# 3092

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

  • Accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer Assembly, 20/40/60min. durations. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3092-01

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.
In Stock
Retail: $26.00
$23.40
View
Add
Item# 5520-11T

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

  • 20/40/60 minute interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $247.00
$222.30
View
Add
Item# 5520-13T

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

  • 1-2-3 hour interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box:

  • Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $239.00
$215.10
View
Add
Item# 65941

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
In Stock
Retail: $35.29
$33.00
View
Add
Item# 99281

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
In Stock
Retail: $36.99
$34.95
View
Add
Item# HR4B

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

  • (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $37.65
$28.20
View
Add
Item# HR5B

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
  • Instruction sheet.
In Stock
Retail: $68.25
$39.38
View
Add
Item# HR7B

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $43.20
$28.86
View
Add
Item# NG10

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $82.99
$54.04
View
Add
Item# NG12

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $86.99
$60.94
View
Add
Item# NG14

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $93.99
$65.84
View
Add
Item# PR-SU

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

  • Convertable to/from Natural Gas to/from Propane Gas Regulator
  • 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
  • Rated 1/2 PSIG.  
In Stock
$20.59
View
Add
Item# RGB

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

In Stock
Retail: $11.35
$7.95
View
Add
Item# 80007390
4 output-connector, electronic ignition module with chrome plastic battery cap. Features 2 input terminals on the back for the ignition switch. Requires a AA battery(not included).
In Stock
$18.49
View
Add
Item# G350-0017-W1
2 output "AA" electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the ignition switch and 2 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately.  Genuine Charbroil Part.
In Stock
$13.69
View
Add
Item# G350-0064-W1
Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire end.  IMPORTANT: This electrode only fits Charbroils 1" diameter burner tubes.
In Stock
$3.59
View
Add
Item# G511-0018-W1
Ignitor electrode with mounting clip and molded in wire. Electrode tip bends at a 90 degree angle. Wire length is 24".
In Stock
$6.49
View
Add
Item# G511-0055-W1
4 output "AA" electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the ignition switch and 4 output terminals for the electrodes. IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately. Genuine Charbroil Part.
In Stock
$18.69
View
Add
Item# G513-0021-W1
6 output-connector, electronic ignition module with chrome plastic battery cap. Features 2 input terminals on the back for the ignition switch. Requires a AA battery (not included).
In Stock
$15.17
View
Add
Item# G513-0021-W2
Chrome plastic battery cap with internal spring for "AA" ignition modules that have a remotely located push button switch.  This is a hard cap, intended to secure the "AA" battery inside of the ignition module only.  Measures 1-1/4" at the base.
In Stock
$4.99
View
Add
Item# G515-0014-W1
Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire end.  IMPORTANT: This electrode only fits Charbroils 1" diameter burner tubes.
In Stock
$3.59
View
Add
Item# G515-0017-W7
Charbroil Surefire ignition switch kit. Kit includes one flush mount igniter switch push button and three sets of different length wires to accommodate many different models. Two wires per set in lengths of 10", 18" and 26". Installation instructions included. Charbroil OEM part.
In Stock
$9.99
View
Add
Item# G515-0030-W1
Black plastic battery cap with internal spring, for "AA" ignition modules that have a remotely located push button switch. This is a hard cap, intended to secure the "AA" battery inside of the ignition module only. Measures 1-1/4" at the base.
In Stock
$4.99
View
Add
Item# G515-0030-W2
5 output "AA"  electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the remote ignition switch and 5 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately.  Genuine Charbroil Part.
In Stock
$17.99
View
Add
Item# G352-1000-W1
4-3/4" Deep Char-Broil "Urban RED" radiant trough. Used on some smaller models using a single trough. Measures 17-3/8" front to back X 17-1/4" wide and is 4-3/4" deep (measured from side lip edge). This trough has round peg leg mounts.
In Stock
$41.69
View
Add
Item# G352-2100-W1
3" Deep Charbroil Infrared radiant trough. Measures 17-1/4" front to back X 17-7/8" wide and is 3" deep (measured from the side edge). Trough has extended mounting leg supports on the front and back sides. This trough is used on some single trough, 2 burner models.  IMPORTANT: This trough is used on "single" trough Gourmet Series 2 Burner models only, it does not fit models that use 2 troughs.
In Stock
$39.99
View
Add
Item# G517-0800-W1
4-5/8" Deep Char-Broil RED radiant trough. Measures 17-1/2" front to back X 25-3/4" wide and is 4-5/8" deep (measured from the side edge).  Fits some models that use a "single" full width trough design. Features round peg style mounting legs.
In Stock
$38.99
View
Add
Item# G517-6600-W1
3" Deep Char-Broil infrared radiant trough. Measures 17-1/4" front to back X 26-1/4" wide and 3" deep (measured from side edge).  Fits 3 burner Gourmet Series models that use a "single" full width trough design. Features extended mounting leg supports on the front and back sides.
In Stock
$35.07
View
Add
Item# 80007859
Charbroil RED Radiant trough. This is the smaller right side pan. Measures 9-1/2" wide X 17-3/8" front to back and 4-5/8" deep(measured from the side edge). *this trough has square legs and goes with trough #80007880 only.
In Stock
Retail: $43.99
$40.25
View
Add
Item# 80007874
This Char-broil RED radiant trough measures 15-7/8" wide X 17-3/8" front to back and 4-3/4" deep. (Depth is measured from side lip). Mounting legs are "square tab" style. This trough is used on some models where the two troughs are the same size offering a 50/50 split.
In Stock
$45.49
View
Add
Item# 80007880
This Char-broil RED radiant trough measures 18-3/4" wide X 17-3/8" front to back and 4-5/8" deep(measured from the side edge). This is the larger of the two troughs and is on the left side facing the grill. *goes with trough #80007859 only.
In Stock
$49.99
View
Add
Item# G511-4600-W1
This is the larger of the two troughs and is on the left side facing the grill. 17-3/8" front to back by 18-3/4" wide and 4-5/8" deep(measured from side edge). This is the newer style trough with round peg legs. *goes with trough #G511-4700-W1 only.
In Stock
$46.85
View
Add
Item# G511-4700-W1
Charbroil Radiant trough. This is the smaller right side pan. Measures 9-1/2" wide X 17-3/8" front to back and 4-5/8" deep(measured from the side edge). Differs from the older 9-1/2" trough, 80007859, in that it has round legs. *goes with trough #G511-4600-W1 only.
In Stock
$38.99
View
Add
Item# G521-0900-W1
4-5/8" Deep Char-broil RED radiant trough. Measures 14-7/8" wide X 17-3/8" front to back and 4-5/8" deep (measured from the side edge). This trough was used on some models where the two troughs are the same size offering a 50/50 split.
In Stock
$37.65
View
Add
Item# G521-3500-W1
3" Deep Charbroil Infrared radiant trough. Measures 15-1/8" wide X 17-1/4" front to back and is 3" deep (measured from the side edge). This trough has extended mounting leg supports on the front and back sides.  IMPORTANT: This trough is used on Gourmet Series 4 burner models with 2 troughs that are the same size, offering a 50/50 split. More than one required, sold individually.
In Stock
$48.46
View
Add
Item# G616-3700-W1
4-3/4" Deep Char-broil RED radiant trough. Measures 15-7/8" wide X 17-3/8" front to back and 4-3/4" deep (measured from side edge). Mounting legs are "round peg" style. This trough is used on some 4 burner models where the two troughs are the same size offering a 50/50 split.
In Stock
$46.96
View
Add
Item# 80007859-7880
Set of two radiant troughs. Includes 18-3/4" wide large trough and 9-1/2" narrow trough. Both troughs measure 17-3/8" front to back and are 4-5/8" deep. Total set width is 28-1/4". This trough set is distinguished by the size and square support legs.
In Stock
$77.35
View
Add
Item# 80007874-2
Set of two radiant troughs. This set is a 50/50 split with "square mounting legs". The total set width is 31-3/4". Each trough measures 15-7/8" wide x 17-3/8" front to back and are 4-5/8" deep. This trough set is distinguished by the size and square support legs.
In Stock
$73.99
View
Add
Item# G511-4600-4700
Set of two radiant troughs. Includes 18-3/4" wide large trough and 9-1/2" narrow trough. Both troughs measure 17-3/8" front to back and are 4-5/8" deep. Total set width is 28-1/4". This trough set is distinguished by the size and round support legs.
In Stock
$76.59
View
Add
Item# G521-0900-W1-2
Set of two radiant troughs. This set is a 50/50 split with round mounting legs. The total set width is 29-3/4". Each trough measures 14-7/8" wide x 17-3/8" front to back and are 4-5/8" deep. This trough set is distinguished by the size and round support legs.
In Stock
$63.00
View
Add
Item# G616-3700-W1-2
Set of two radiant troughs. This set is a 50/50 split with "round peg mounting legs". The total set width is 31-3/4". Each trough measures 15-7/8" wide x 17-3/8" front to back and are 4-3/4" deep.
In Stock
$91.99
View
Add
Item# G511-0012-W1
Char-Broil RED trough dividing and support bar. Bar sets between right and left troughs. Measures 3/4" wide X 17" front to back.
In Stock
$20.85
View
Add
Item# G521-0037-W1
Char-Broil RED trough dividing and support bar. Bar sets between right and left troughs. Measures 3/4" wide X 18-1/4" front to back.
In Stock
$11.29
View
Add