Ducane Affinity Grill Parts

grill parts: Ducane Affinity 3400 "Stainless Steel" Heat Plate Set (3)

Ducane Affinity 3400 "Stainless Steel" Heat Plate Set (3)

Item# AFHP1012
This part is in stock. IN STOCK
$58.90
Full "set of three" stainless steel heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 3400 model grills. The two right sections are notched to accommodate the rotisserie burner. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.  Made in USA.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

  • Qty:
Parts for Affinity Grills: 18" Ducane Affinity Stainless Steel Burner Tube
Item# DUCT1
Individual (single piece),18" long stainless steel burner tube for Ducane Affinity models. Features an air/fuel mixture adjustment shutter on the venturi/valve end and forked mounting tabs on the back end.
In Stock
Retail: $38.30
$9.00
View
Add
Parts for Affinity Grills: Set Of Three, 18" Stainless Steel Tube Burners For Ducane Affinity 3100/3200/3400
Item# DUCT1-3
Set of three, 18" long Ducane Affinity stainless steel tube burners, for 3100/3200/3400 models. Each burner features an air mixture adjustment shutter on the venturi/valve end and forked mounting tabs on the back end.
In Stock
$28.75
View
Add
Parts for Affinity Grills: Set Of Four, 18" Stainless Steel Tube Burners For Ducane Affinity 4100/4200/4400
Item# DUCT1-4
Set of four, 18" long Ducane Affinity Series stainless steel tube burners, for 4100/4200/4400 models. Each burner features an air mixture adjustment shutter venturi/valve end and forked mounting tabs on the back end.
In Stock
$36.85
View
Add
Parts for Affinity Grills: Ducane Affinity 3400 "Stainless Steel" Heat Plate Set (3)
Item# AFHP1012
Full "set of three" stainless steel heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 3400 model grills. The two right sections are notched to accommodate the rotisserie burner. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.  Made in USA.
In Stock
$58.90
View
Add
Parts for Affinity Grills: Ducane Affinity 3100/3200 "Stainless Steel" Heat Plate Set (3)
Item# AFHP1013
Full set of three "stainless steel" heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 3100/3200 model grills. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. Made in USA.
In Stock
$58.90
View
Add
Parts for Affinity Grills: Ducane Affinity 4400 "Stainless Steel" Heat Plate Set (4)
Item# AFHP1014
Full set of four "stainless steel" steel heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 4400 model grills. The two center sections are notched to accommodate the rotisserie burner. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.  Made in USA.
In Stock
$74.85
View
Add
Parts for Affinity Grills: Ducane Affinity 4100/4200 "Stainless Steel" Heat Plate Set (4)
Item# AFHP1015
Full set of four "stainless steel" heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 4100/4200 model grills. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.  Made in USA.
In Stock
Retail: $132.20
$74.85
View
Add
Parts for Affinity Grills: 17-7/8" X 28-1/2" Two Piece Gloss Cast Iron Cooking Grate Set
Item# 68502
Heavy duty "two" piece cast iron cooking grate set with porcelain gloss finish. Each section measures 17-7/8" front to back X 14-1/4"wide, for a total width of 28-1/2". Features finger notch on each side edge for easy installation and removal. Fits Ducane Affinity 4100 and 4200 series models and some Uniflame models.
In Stock
Retail: $208.94
$88.24
View
Add
Parts for Affinity Grills: 6" Jumper Wire For Electronic Ignition Module
Item# 03197
Jumper wire for closing off unused terminals on battery powered electronic ignition modules. Measures 6" long, (including the connectors). Features flat spade connectors with plastic protectors on each end.
In Stock
Retail: $4.88
$2.81
View
Add
Parts for Affinity Grills: 3 Output "AA" Ignition Module With Push Button Cap
Item# 03333
Three output "AA" electronic ignition module with push button battery cap. Features 3 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.
In Stock
$18.57
View
Add
Parts for Affinity Grills: 4 Output "AA" Electronic Ignition Module With Push Button Cap
Item# 03340
Four output "AA" electronic ignition module with push button battery cap. Features 4 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.
In Stock
Retail: $37.92
$17.92
View
Add
Parts for Affinity Grills: 5 Output "AA" Electronic Ignition Module With Push Button Cap
Item# 03380
Five output "AA" electronic ignition module with push button battery cap. Features 5 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Module measures 3-3/8" long X 2" wide. Battery not included.
In Stock
Retail: $48.97
$27.26
View
Add
Parts for Affinity Grills: Ducane Affinity 3-Burner Collector Box And Electrode Set
Item# 30501047
3-burner collector box and electrode set. Kit includes three igniter collector boxes with ceramic electrodes and molded in wires. For Ducane Affinity grills. Two with 25-1/2" wires and one with a 35-1/2" wire. All wires have flat spade connectors.
In Stock
$21.46
View
Add
Parts for Affinity Grills: Ducane Affinity 4-Burner Collector Box And Electrode Set
Item# 30501048
4-burner collector box and electrode set. Kit includes four igniter collector boxes with ceramic electrodes and molded in wires. For Ducane Affinity grills. Includes two 25-1/2" wires and two 35-1/2" wires, all with flat spade connectors.
In Stock
$26.95
View
Add
Parts for Affinity Grills: Push Button/Battery Cap For "AA" Electronic Ignition Module
Item# G409-0030-W1
Push button battery cap with spring, for "AA" electronic ignition module. The cap features a soft rubber "push button" top. The diameter at the base of the cap measures 1-1/4".
In Stock
$4.99
View
Add
Parts for Affinity Grills: "Knob" For Rotary Igniter/Spark Generator With "Round" Knob Shaft
Item# GGK9
Replacement "knob" for manual "rotary" igniter/spark generators with "round" knob shaft. Measures 1-3/4" in diameter and features "molded in" directional arrow graphics.  IMPORTANT: This is the "knob" only.
In Stock
Retail: $4.55
$3.00
View
Add
Parts for Affinity Grills: 20" Igniter Wire, With 2 Female Flat Spade Connector Ends
Item# IG18B
20" igniter wire. Features flat female spade connectors on both ends.
In Stock
Retail: $4.05
$2.85
View
Add
Parts for Affinity Grills: Igniter Wire - 20in. (Female Spade to Female Round Termination)
Item# IG7B

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

  • (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.
In Stock
Retail: $3.70
$2.79
View
Add
Parts for Affinity Grills: 6 Output "AA" Electronic Ignition Module With Push Button Cap
Item# IGEIB6B
Universal 6 output "AA" ignition module with soft push button battery cap. Features 6 output terminals on the back. Mounting hole needs to be at least 7/8" diameter. Battery not included.
In Stock
Retail: $35.20
$20.92
View
Add
Parts for Affinity Grills: 3-Outlet Manual "Rotary" Spark Generator And Knob
Item# UP8B
"Rotary" spark generator with three outlets. Includes knob and screws. Screw mounting holes are 1-3/8" center to center.
In Stock
Retail: $23.35
$15.99
View
Add
Parts for Affinity Grills: Aluminum Grease Catch Pan With Foil Liner - (8-5/8in. x 6-1/8in.)
Item# 93305

Genuine Weber Aluminum Grease Catch Pan and One Single Disposable Foil Liner. Fits most Weber Genesis, Genesis II (2016+), Spirit, Summit Silver/Gold/Platinum and Summit 400/600 (prior to 2000) gas grills.

IMPORTANT: Please verify Catch Pan dimensions:
Pan measures 8-5/8in. x 6-1/8in. wide (width measurement includes the folded side rail extension).

Fits the following Weber Gas Grills:

  • Weber Genesis
  • Genesis II (2016+)
  • Spirit
  • Summit Silver/Gold/Platinum
  • Summit 400/600 (prior to 2000) 

What's Included:

  • (1) Weber Grills Aluminum Grease Catch Pan With Foil Liner, 8-5/8in. x 6-1/8in.
  • (1) Disposable Foil Liner
  • Foil liners available in a pack of 10, Part# 6415.
  • Genuine Weber Part
  • Please verify dimensions
In Stock
$16.49
View
Add
Parts for Affinity Grills: Propane Adapter Hose - Stainless Steel Overbraid - (14ft.)
Item# 100700-168

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

  • (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.
In Stock
$76.99
View
Add
Parts for Affinity Grills: Quick Connect Fitting - On/Off Ball Valve - 3/8in. Fitting
Item# 104007

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

  • 1 On/Off Ball Valve Quick Connect Fitting
  • Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.
In Stock
$32.99
View
Add
Parts for Affinity Grills: Quick Connect Fitting - 3/8in. (For 3/8in. Hose)
Item# 104406

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 3/8" Gas Line Quick Connect Fitting
In Stock
$23.34
View
Add
Parts for Affinity Grills: Commercial 2-Stage Regulator - 30in. HD Hose - 3/8in. Fittings
Item# 106238-30

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

  • 2-Stage Regulator and 30in. Hose Assembly which includes:
  • 3/8in. ID high pressure hose, 30in. length.
  • 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
  • One 3/8in. to 3/4in. brass adapter included.  
In Stock
$49.99
View
Add
Parts for Affinity Grills: Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.)
Item# 3090

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

  • This timer accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Parts for Affinity Grills: Control Knob - For Automatic Gas Timer - (1 to 3hrs.)
Item# 3090-01

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.
In Stock
Retail: $20.00
$18.00
View
Add
Parts for Affinity Grills: Automatic Gas Timer - Shut Off Valve - (20/40/60min.)
Item# 3092

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

  • Accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer Assembly, 20/40/60min. durations. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Parts for Affinity Grills: Control Knob - For Automatic Gas Timer - (20/40/60min.)
Item# 3092-01

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.
In Stock
Retail: $26.00
$23.40
View
Add
Parts for Affinity Grills: Automatic Gas Timer with Stainless Steel Connection Box - (20/40/60min.)
Item# 5520-11T

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

  • 20/40/60 minute interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $247.00
$222.30
View
Add
Parts for Affinity Grills: Automatic Gas Timer with Stainless Steel Connection Box - (1 to 3hrs.)
Item# 5520-13T

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

  • 1-2-3 hour interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box:

  • Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $239.00
$215.10
View
Add
Parts for Affinity Grills: Propane Regulator and Single Hose Assy. (24in.)
Item# 65941

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
In Stock
Retail: $35.29
$33.00
View
Add
Parts for Affinity Grills: Propane Regulator and Single Hose Assy. (40in.)
Item# 99281

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
In Stock
Retail: $36.99
$34.95
View
Add
Parts for Affinity Grills: Propane Regulator and Single Hose Assy. (24in.)
Item# HR4B

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

  • (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $37.65
$28.20
View
Add
Parts for Affinity Grills: Propane Regulator and Dual (2) Hose Assy. (2 x 22in.)
Item# HR5B

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
  • Instruction sheet.
In Stock
Retail: $68.25
$39.38
View
Add
Parts for Affinity Grills: Propane Regulator and Single Hose Assy. (40in.)
Item# HR7B

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $43.20
$28.86
View
Add
Parts for Affinity Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (10ft.)
Item# NG10

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $82.99
$54.04
View
Add
Parts for Affinity Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (12ft.)
Item# NG12

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $86.99
$60.94
View
Add
Parts for Affinity Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (14ft.)
Item# NG14

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $93.99
$65.84
View
Add
Parts for Affinity Grills: Convertible Gas Pressure Regulator (Natural Gas | Propane)
Item# PR-SU

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

  • Convertable to/from Natural Gas to/from Propane Gas Regulator
  • 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
  • Rated 1/2 PSIG.  
In Stock
$20.59
View
Add
Parts for Affinity Grills: Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.)
Item# RGB

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

In Stock
Retail: $11.35
$7.95
View
Add