Stainless steel tube burner.  Measures 16-7/8" long x 1" in diameter.  Fits a variety of Charbroil Conventional and Tru-Infrared models, which utilize a "screw mount" carry over tube.  The venturi or valve end of the tube has an insect screen, air mixture screw and mounting holes for the electrode.  The back end of the tube features a short 90 degree bend with a centered mounting screw hole and a hole for the carry over tube mounting screw. Burner mounting hardware included (one each, screw, flat washer and lock washer).  Genuine Charbroil Part. 

Heavy duty cast iron replacement burner. Burner dimensions are 13-3/4" long X 2-1/4" wide, including the bottom side venturi tube length. Includes pin clip.  Replaces Charbroil OEM Parts 80001449, 80000023, 80010062 and G40100129001.

Rectangular cast iron burner. Burner measures 16" total length front to back (including shutter extension) X 6-1/4" wide. Fits a variety of DCS and LYNX models. Includes air/fuel mixture shutter, mounted as shown. Quality Aftermarket Part.

Cast iron bar burner. Burner measures 15-7/8" long X 2-7/8" wide across the angled top portion.  Venturi pipe extends 1-7/8" past the body of the burner.  Features air/gas mixture adjustment locking screw at venturi end.  IMPORTANT: This burner has a 1/2" wide valve stem opening at the venturi end and the distance from the end of the venturi pipe to the center of the bottom mounting peg is 15-3/8". Mounting peg cotter pin included.

High Quality Cast Stainless Steel Burner for longevity and heat distribution and retention. Features a stainless steel air mixture adjustment shutter with insect screen, and rear mounting peg with Cotter Pin clip.

Fits a variety of Grill Brands that have 3, 4 and 5 burner models. 

These Cast Stainless Steel Burners for three to five burner grills aren't your run-of-the-mill grill components; they're the backbone of your outdoor cooking empire. Crafted with precision and durability in mind, these burners are like the Iron Man suits of the grilling world—sleek, powerful, and ready to take on whatever culinary challenge you throw their way. With their heavy-duty construction and superior heat retention, these Grillparts.com Cast Stainless Steel Burners ensure consistent cooking temperatures across the board, so you can kiss unevenly cooked meals goodbye. Whether you're searing up a steak or slow-roasting some veggies, these burner bad boys have got your back.

Measurements:

• Length: 15-7/8in.(Tip-to-tip)
• Width: 2-5/8in. (Across the angled top)
• Venturi pipe extends 2-3/8in. past the body of the burner.
• IMPORTANT:  Please verify this dimension; Measurement from the end of the venturi (valve end) pipe to the center of the rear mounting peg (located on the bottom of the burner) is 15-13/16in.

What’s Included:

• (1) Cast Stainless Steel Burner - (15-7/8in. x 2-5/8in.)
• Sold individually, more than one required
• Highest quality aftermarket part

Stainless steel straight tube burner. Mounting tab has a 90 degree bend and is manufactured with dual slotted holes for mounting. Measures 16-7/8" end to end.

Stainless steel tube burner. Measures 14-3/8" long x 1" in diameter. Fits a variety of Charbroil, Kenmore and many other brands/models, which utilize a "screw mount" carry over tube. The venturi or valve end of the tube has an insect screen, air mixture screw and mounting holes for the electrode. The back end of the tube features a short 90 degree bend with a centered mounting screw hole and a hole for the carry over tube mounting screw. Mounting hardware included. Genuine Charbroil Part. (Replaces Part G431-0300-W2)

16-3/4" stainless steel tube burner. Features an air adjustment shutter. The mounting flange bends at 90 degrees and has a centered slotted hole. Fits many Kenmore and Master Forge models.

Stainless steel looped tube burner. Measures 6-1/2" wide by 16-5/8" long. Features an adjustable air shutter and spot welded, centered mounting screw with nut.

Stainless steel vented burner shield or "Flame Tamer". Measures 4-1/4" width X 15" front to back (measurement includes tabs). For easier measurement we measure the width from edge to edge with the shield upside down. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Heavy guage 430 stainless steel heat distribution plate. Measures 17-3/4" long x 6-3/8" across the bottom. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 5-7/8" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Stainless steel heat distribution shield. Measures 17-5/16" front to back X 9-7/8" wide. Fits a variety of Nexgrill and Costco/Kirkland models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Stainless steel heat distribution shield. Measures 17-5/16" front to back X 8-1/4" wide. Fits a variety of Nexgrill, JennAir, Vermont Casting and Costco/Kirkland models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Stainless steel burner shield. The hanging flanges at the ends of the shield are bent down and out at a 90 degree angle. The main flat part of the shield measures 15-3/8" X 4". Total length measurement including the extended flange ends is 16-1/2". IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Heavy duty, porcelain enameled "matte finish" cast iron cooking grate. Measures 10-3/8" wide X 19-1/4" front to back. More than one required. Sold individually. (Also available as a set of 3, see part CG69PCI-3).

Heavy duty, porcelain enameled "matte finish" cast iron, 3-piece cooking grate set. Fits Ducane Stainless Series 5-burner grills and a variety of other brands and models. Each section measures 19-1/4" front to back X 10-3/8" wide. Total surface area measurement of the set is 19-1/4" X 31-1/8".

Single piece, 5/16" diameter solid stainless steel rod (304 Grade), cooking grate. Fits Ducane Stainless Series 5-burner models and a variety of other brands/models. Measures 19-1/4" front to back X 10-3/8" wide. More than one required. Sold individually. (Also available as a 3 piece set, see part CG96SS-3).

3 piece stainless steel cooking grate set.  Sturdy 5/16" diameter solid stainless steel rod construction (304 grade).  Fits Ducane Stainless Series 5-burner models and a variety of other brands/models. Each piece measures 19-1/4" front to back X 10-3/8" wide. Total surface area measurement of the set is 19-1/4" X 31-1/8".

Attractive black and chrome heat/gas Control Knob measures 2-5/16in. (dia. at base). Replaces an existing damaged, worn or broken heat control knob on bbq gas grills. Fit Kit included to secure knob to  6mm or 8mm “D” shaped gas valve stems at the proper stand-off height.

What’s Included:

• 1 Chrome and Black Gas Control Knob (plastic)
• 1 Fit Kit for proper installation (6 pc.)

Features:

• Attractive and easy-to-clean chrome heat control knob
• Fits 6mm or 8mm “D” shaped gas control valve stems
• 6 inserts to insure proper mounting to a variety of BBQ Gas Grills

Fitment:

• Fit Kit includes 6pc. inserts that allow for selecting knob "ON/OFF" position and a set screw with locking pressure tab.
• Variety of insert lengths for proper stand-off height: Flush, 1/4in., 1-1/2in. Inserts can be trimmed to your desired length for a professional fit.
• Click PDF in preview window for assembly instructions.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

• 1 On/Off Ball Valve Quick Connect Fitting
• Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 3/8" Gas Line Quick Connect Fitting

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

• (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
• Instruction sheet.

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.