Stainless steel main burner tube. Measures 16-3/8" long X 1" in diameter. Features an attached electrode mounting bracket with electrode mounting screws, an air mixture adjustment shutter with insect screen at the venturi end and a centered slotted mounting hole at the back end. Fits a variety of Master Forge models.

14-3/4" long stainless steel straight tube burner. Features mounting holes for electrode and spider screen at the venturi end and a centered mounting hole at the back end of the burner. Fits a variety of Master Forge models as well as many other brand/models. One electrode mounting screw included.

Stainless Steel Tube Burner, measures 16-1/2in. from end-to-end including mounting flange. Burner mounting flange has a single centered hole.

Turn up the heat with a clean flame by replacing old burners with these new high quality BBQ Grillware stainless steel tube burners to enjoy consistent surface heat, just like when your grill was new.

Fitment:

• BBQ Grillware models GGPL-2100, GSC-2418, GSC-2418N
• Various other gas bbq grill brands/models that require a 16-1/2in. tube burner.

Key Features:

• Air/fuel mixture adjustment shutter for precise control
• Durable stainless steel construction for longevity

Included:

• (1) Stainless Steel Tube Burner - 16-1/2in.

Cast iron bar burner. Measures 16-1/2" long (tip to tip, including the venturi pipe and mounting tab extensions) X 2-15/16" wide. Features a stainless steel 2 position (LP and NG) air mixture shutter with set screw and a back end mounting tab with centered hole. Fits a variety of Master Forge models.

Stainless steel straight tube burner. Mounting tab is flat and has the mounting hole offset to the right side of the tab. Measures 16-1/4" end to end.

16-3/4" stainless steel tube burner. Features an air adjustment shutter. The mounting flange bends at 90 degrees and has a centered slotted hole. Fits many Kenmore and Master Forge models.

16-7/16" stainless steel tube burner with an attached igniter electrode mounting bracket (electrode not included). Features an air adjustment shutter and round centered hole on the mounting flange.

Stainless Steel Heat Distribution Burner Shield features two elongated mounting slots on each end. Designed to protect the burner, vaporize food drippings and create an even cooking surface temperature.

• Fits a variety of gas grills that require a burner shield with the dimensions of: 16-1/2in. x 4in.
• IMPORTANT: Remove protective plastic film (if present) from product prior to use.

Stainless Steel Heat Distribution Burner Shields act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Carefully engineered to move heat directionally and vaporize drippings to infuse your food with that smoky, savory goodness that’ll have your taste buds singing with joy.

Louvered heat tent measures 15-3/8" long X 3-5/8" wide (measured across the bottom). Features four louver vents on the top of the shield. Stainless steel. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 15-3/8" long X 3-3/4" wide (measured across the bottom). IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Porcelain coated vented heat tent. Measures 14-5/8" long (including end tabs) X 4-1/4" measured across the bottom.

Stainless steel heat shield. Measures 15-5/8" long X 4-1/8" wide.  Features unique rounded top.  Fits many Kenmore and Master Forge models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Stainless steel vented heat distribution plate. Measures 14-7/8" long X 3-1/2" wide. Fits a variety of Master Forge models.  IMPORTANT:  Please verify dimensions to assure fit. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Stainless steel vented heat distribution plate. Measures 15-3/4" long X 5-3/8" wide. Features a mounting tab on each corner and 4 slotted vents (2 on each side). Fits a variety of Master Forge models. Designed to be used with cast iron burner part CIMF1. Replaces Master Forge OEM Part 503225-10. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Stainless steel, tent shaped burner shield. Measures 16" long X 4" wide (measured across the bottom). Features 4 slots and 4 vents on each side of the tent. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

2pc. Heavy duty, cast iron cooking grates hold heat, and clean up easily thanks to its porcelain enamel finish and non-stick properties. Two grates at 19-3/16in. x 12-3/8in. each in a set that offers a total of 24-3/4in. x 19-3/16in. coverage.

Freshen up your grilling experience! Replace your cooking grates where the meat greets the heat with these heat-holding and robust solid cast iron cooking grates. Rust-resistant and easy to clean, thanks to their porcelain enameled finish. They make perfect sear marks and are great for everyday grilling for many seasons to come.

What’s Included:

• (1) Two piece porcelain coated cast iron cooking grate set.
• Grate Sections Measure: 19-3/16in. x 12-3/8in. each.
• Total Grate Coverage:  24-3/4in. x 19-3/16in.

17-5/8" X 26-5/8" three piece, "gloss finish", porcelain enameled cast iron cooking grate set. Each section measures 17-5/8" front to back X 8-7/8" wide for a total set width of 26-5/8".

"Gloss finish" porcelain enameled cast iron cooking grate. Measures 17-5/8" front to back X 8-7/8" wide.  Sold individually.

Porcelain-enameled "gloss finish" cast iron cooking grate "3 piece set". Each section measures 16-7/8" front to back X 8-1/4" wide. For a total set width of 24-3/4". Features "finger notch" on all sides for easy installation and removal. Fits many Charbroil Red and Gourmet Infrared models. Also fits some Kenmore grills.

Heavy duty 2 piece, matte finish cast iron cook grate set. Each grate measures 18-5/16" front to back X 13-1/8" wide. Total measurement is 18-5/16" X 26-1/4".

Heavy duty, 4 piece porcelain coated cast iron cooking grate set with "gloss finish". Each section measures 7-1/8" wide x 16-7/8" front to back, for a total set width of 28-1/2". Features "finger notch" on each edge for easy installation and removal. Fits many Charbroil "Red" and "Gourmet Series" Infrared, 4 burner models.

"Matte finish" porcelain enameled cast iron cooking grate. Measures 8-3/4" wide X 17-5/8" front to back.  Sold individually.

Single piece,porcelain coated "matte finish" cast iron cooking grate. Measures 16-7/8" front to back X 8-1/4" wide. Features "finger notch" on the sides for easy installation and removal. Fits a variety of Charbroil, Kenmore and many other brand/models. more than one required.

Attractive black and chrome heat/gas Control Knob measures 2-5/16in. (dia. at base). Replaces an existing damaged, worn or broken heat control knob on bbq gas grills. Fit Kit included to secure knob to  6mm or 8mm “D” shaped gas valve stems at the proper stand-off height.

What’s Included:

• 1 Chrome and Black Gas Control Knob (plastic)
• 1 Fit Kit for proper installation (6 pc.)

Features:

• Attractive and easy-to-clean chrome heat control knob
• Fits 6mm or 8mm “D” shaped gas control valve stems
• 6 inserts to insure proper mounting to a variety of BBQ Gas Grills

Fitment:

• Fit Kit includes 6pc. inserts that allow for selecting knob "ON/OFF" position and a set screw with locking pressure tab.
• Variety of insert lengths for proper stand-off height: Flush, 1/4in., 1-1/2in. Inserts can be trimmed to your desired length for a professional fit.
• Click PDF in preview window for assembly instructions.

Main burner electrode and collector box assembly. Features a mounting flange with mounting hardware, 42" long molded-in wire that ends in a flat female spade terminal fitting with protective sleeve. Overall length of the electrode assembly measures 3-1/2", from the mounting flange to the end of the collector box measures 2-3/4". Fits a variety of Master Forge and other brand/models.

Three output "AA" electronic ignition module with push button battery cap. Features 3 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.

Four output "AA" electronic ignition module with push button battery cap. Features 4 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.

Five output "AA" electronic ignition module with push button battery cap. Features 5 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Module measures 3-3/8" long X 2" wide. Battery not included.

47" Replacement wire with flat female spade connectors on each end. One end black shrink wrapped and the other with a square plastic protector.

3-5/8" long main burner igniter electrode with mounting bracket. Features a 90 degree bend electrode tip, 3" long white ceramic insulator with attached mounting bracket and a flat male spade wire terminal. Mounting hardware included. Fits a variety of Brinkmann, Kenmore, Master Forge, Members Mark/Sams Club models.

Main burner electrode with molded in 43" long wire that terminates with a female flat spade fitting.  Also includes an adapter wire with male spade and female round end fittings that will allow for connecting to either an electronic or a manual (rotary or push button) spark generator.  Features a 2-7/8" long white ceramic insulator with a 90 degree electrode tip and an in-line mounting tab with 2 screw holes. This electrode is designed to mount directly onto the main burner tube. Mounting hardware "not" included. Fits many Charbroil, Master Forge and Kenmore models as well as many other brands/models.

Main burner electrode with molded in 25" long wire that terminates with a flat female spade fitting. Features a 3-3/4" long white ceramic insulator with a 90 degree electrode tip and an in-line mounting tab with 2 screw holes. This electrode is designed to mount directly onto the main burner tube. Mounting hardware, 2 machine screws with nuts, included. Fits many Master Forge models as well as many other brands/models.

"AA" electronic igniter spark generator. Includes push button cap, internal battery connection spring and mounting locknut. Features two output terminals on back of the module.  Genuine Broilmaster Part.

Electrode with wire includes wire insulating jacket. The ceramic portion hidden by the insulating wire is 3-3/4" long. Electrode tip is 1-7/8" to the tip where is bends 90 degrees. Wire length is 23-1/2" and terminates to a flat spade connector.

20" igniter wire. Features flat female spade connectors on both ends.

Main burner "electrode and collector box with wire". Features a 2" long white ceramic insulator, vented collector box, 28" long molded-in wire with flat female spade connector and an "L" shaped mounting bracket with 2 screw holes. Set of two mounting screws included. This mounting bracket is specifically designed to fit onto the Master Forge cast iron burner, part CIMF1 (sold separately).  Fits a variety of Master Forge models. (Burner not included, shown for display purposes only.)

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

• (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.

Universal 6 output "AA" ignition module with soft push button battery cap. Features 6 output terminals on the back. Mounting hole needs to be at least 7/8" diameter. Battery not included.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

• 1 On/Off Ball Valve Quick Connect Fitting
• Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 3/8" Gas Line Quick Connect Fitting

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

• (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
• Instruction sheet.

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.