Set of "2" burner tube mounting brackets for Weber Genesis II models. These brackets are mounted on the back wall of the firebox and are designed to receive the "knife" end of the burner tubes. Mounting hardware, 2 screws (one per bracket), included. Genuine Weber Part.

"Set of 2" stainless steel rectangular tube Natural Gas (NG) "Main" Burners.  Fits 2 and 4 Burner Genesis II and II/LX Natural Gas (NG) Models (210/240 and 410/440), "Model Years 2017 and Newer". Four Burner Models require 2 Sets.  Each tube measures 19-1/2" long (including the rear mounting tab).  Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket. Installation instructions included. Genuine Weber Part.

"Set of 3" stainless steel rectangular tube Propane (LP) "Main" Burners.  Fits Genesis II "LX" 3 and 6 burner models (340 and 640), "Model Years 2017 and Newer". The 6 burner model (640) requires "2" sets.  Each tube measures 19-1/2" long (including the rear mounting tab).  Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket.  Installation instructions included. Genuine Weber Part.

"Set of 2" stainless steel rectangular tube Propane (LP) "Main" Burners.  Fits 2 and 4 Burner Genesis II "LX" Propane (LP) Models (240 and 440) "Model Years 2017 and Newer". Four Burner Models (440) require 2 Sets.  Each tube measures 19-1/2" long (including the rear mounting tab). Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket. Installation instructions included. Genuine Weber Part.

19-1/2" long propane (LP) "sear" burner tube for Weber Genesis II LX models. Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket. Installation instructions included. Genuine Weber Part.

"Set of 2" stainless steel rectangular tube Propane (LP) "Main" Burners.  Fits 2, 4 and 6 Burner Genesis II Propane (LP) Models (210, 410 and 610), "Model Years 2017 and Newer".  Four Burner Models require 2 Sets and Six Burner Models require 3 Sets.  Each tube measures 19-1/2" long (including the rear mounting tab).  Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket. Installation instructions included. Genuine Weber Part. (Replaces Part 66069)

"Set of 3" stainless steel rectangular tube Propane (LP) "Main" Burners.  Fits Genesis II "3" Burner, 310 Series, "Model Years 2017 and Newer".  Each tube measures 19-1/2" long (including the rear mounting tab).  Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket.  Installation instructions included. Genuine Weber Part.

"Set of 3" stainless steel rectangular tube Natural Gas (NG) "Main" Burners. Fits 3 and 6 Burner Genesis II and II/LX Natural Gas (NG) Models, (310/340 and 610/640), "Model Years 2017 and Newer". Six Burner Models require 2 Sets. Each tube measures 19-1/2" long (including the rear mounting tab). Features unique rectangular tube shape, slotted mounting tab on the back end, adjustable air shutter with insect screen on the valve end and an attached igniter electrode mounting bracket. Installation instructions included. Replaces Part 66074. Genuine Weber Part.

Set of "3" stainless steel flavorizer bars for Weber Genesis II 210 and "LX" 240 models (2017 and newer). Each bar measures 17-1/8", measured along the bottom edges, and 16-1/8" measured along the top peak of the tent. The width of each bar is 3", and they stand 2-1/8" tall. Feature a cut out vent on each side. Genuine Weber Part.

Set of "5" stainless steel flavorizer bars for Weber Genesis II 310 and "LX" 340 models (2017-21) and Genesis 300 Series (2022-Current). Each bar measures 17-1/8", measured along the bottom edges and 16-1/8", measured along the top peak of the tent. The width of each bar is 3", and they stand 2-1/8" tall. Feature a cut out vent on each side. Genuine Weber Part.

Set of "11" stainless steel flavorizer bars for Weber Genesis II 610 and "LX" 640 models (2017 and newer). Each bar measures 17-1/8" long ,measured along the bottom edges and 16-1/8" long, measured along the top peak of the tent. The width of each bar is 2-1/2", and they stand 2-1/8" tall. Feature a cut out vent on each side. Genuine Weber Part.

Set of "7" stainless steel flavorizer bars for Weber Genesis II 410/"LX" 440 models (2017 and newer) and Genesis 400 Series (2022-Current) Each bar measures 17-1/8" long ,measured along the bottom edges and 16-1/8" long, measured along the top peak of the tent. The width of each bar is 2-1/2", and they stand 2-1/8" tall. Feature a cut out vent on each side. Genuine Weber Part.

Set of "3" porcelain coated flavorizer bars. Fit Weber Genesis II 210 and "LX" 240 models (2017 and newer). Each bar measures 17-1/8" measured along the bottom edges and 16-1/8" measured along the top peak of the tent. The width of each bar is 3", and they stand 2-1/8" tall. Feature a cut out vent on each side. Quality Aftermarket Part.

Set of "5" porcelain coated flavorizer bars. Fit Weber Genesis II 310 and "LX" 340 models (2017 and newer). Each bar measures 17-1/8" measured along the bottom edges and 16-1/8" measured along the top peak of the tent. The width of each bar is 3", and they stand 2-1/8" tall. Feature a cut out vent on each side. Quality Aftermarket Part.

Set of "7" porcelain coated flavorizer bars. Fit Weber Genesis II 410 and "LX" 440 models (2017 and newer). Each bar measures 17-1/8" measured along the bottom edges and 16-1/8" measured along the top peak of the tent. The width of each bar is 2-1/2", and they stand 2-1/8" tall. Feature a cut out vent on each side. Quality Aftermarket Part.

Set of "11" porcelain coated flavorizer bars. Fit Weber Genesis II 610 and "LX" 640 models (2017 and newer). Each bar measures 17-1/8" measured along the bottom edges and 16-1/8" measured along the top peak of the tent. The width of each bar is 2-1/2", and they stand 2-1/8" tall. Feature a cut out vent on each side. Quality Aftermarket Part.

18-15/16" X 33-3/4" three piece stainless steel rod cooking grate set. Solid 1/4" (7mm) stainless steel rod construction.  3 Piece Set, with each grate measuring 18-15/16" front to back X 11-1/4" wide, for a total set width of 33-3/4". Fits Genesis II "LX" 440 Series (Model Years 2017 and Newer) and many other brands/models.  Genuine Weber Part.

"Two piece" porcelain enameled cast iron cooking grate set. Each piece measures 18-7/8" front to back X 9-15/16" wide, for a total set width of 19-7/8". IMPORTANT: The width measurements include the outside edge rail "lug/tab" extensions. These grates are reversible, on one side the front to back rails are "peaked", great for searing, and on the other side the rails are flat. Fits the Weber Genesis "II" 210 Series and many other brands/models. Genuine Weber Part

"Two piece" porcelain enameled cast iron cooking grate set. Each piece measures 18-7/8" front to back X 13-7/16" wide, for a total set width of 26-7/8". IMPORTANT: The width measurements include the outside edge rail "lug/tab" extensions. These grates are reversible, on one side the front to back rails are "peaked", great for searing, and on the other side the rails are flat. Fits the Weber Genesis "II" 310 Series and many other brands/models. Genuine Weber Part

"Three piece" porcelain enameled cast iron cooking grate set. Each piece measures 18-7/8" front to back X 13-7/16" wide, for a total set width of 40-5/16". IMPORTANT: The width measurements include the outside edge rail "lug/tab" extensions. These grates are reversible, on one side the front to back rails are "peaked", great for searing, and on the other side the rails are flat. Fits the Weber Genesis "II" 610 Series and many other brands/models. Genuine Weber Part

"Three piece" porcelain enameled cast iron cooking grate set. Each piece measures 18-7/8" front to back X 11-1/4" wide, for a total set width of 33-3/4". IMPORTANT: The width measurements include the outside edge rail "lug/tab" extensions. These grates are reversible, on one side the front to back rails are "peaked", great for searing, and on the other side the rails are flat. Fits the Weber Genesis "II" 410 Series and many other brands/models. Genuine Weber Part

18-5/8" X 5-1/4" stainless steel warming rack for Weber Genesis II "2" and "6" burner models ( 6 burner models require a quantity of 2). Features a 7/8" tall fence on the back edge, to prevent food from falling off the back of the rack. Genuine Weber Part.

25-5/8" X 5-1/4" stainless steel warming rack for Weber Genesis II "3" burner models. Features a 7/8" tall fence on the back edge, to prevent food from falling off the back of the rack. Genuine Weber Part.

32-5/8" X 5-1/4" stainless steel warming rack for Weber Genesis II "4" burner models. Features a 7/8" tall fence on the back edge, to prevent food from falling off the back of the rack. Genuine Weber Part.

18-15/16" X 19-7/8" two piece stainless steel rod cooking grate set. Solid 1/4" (7mm) stainless steel rod construction. 2 Piece Set, with each grate measuring 18-15/16" front to back X 9-15/16" wide, for a total set width of 19-7/8". Fits Genesis II "LX" 240 Series (Model Years 2017 and Newer) and many other brands/models. Genuine Weber Part.

18-15/16" X 26-7/8" two piece stainless steel rod cooking grate set. Solid 1/4" (7mm) stainless steel rod construction. 2 Piece Set, with each grate measuring 18-15/16" front to back X 13-7/16" wide, for a total set width of 26-7/8". Fits Genesis II "LX" 340 Series (Model Years 2017 and Newer) and many other brands/models. Genuine Weber Part.

18-15/16" X 40-5/16" three piece stainless steel rod cooking grate set. Solid 1/4" (7mm) stainless steel rod construction. 3 Piece Set, with each grate measuring 18-15/16" front to back X 13-7/16" wide, for a total set width of 40-5/16". Fits Genesis II "LX" 640 Series (Model Years 2017 and Newer) and many other brands/models. Genuine Weber Part.

Convert your Weber Genesis or Genesis II "300 Series" grill to a full-size griddle. Measures 25-3/4" (left to right) X 18-5/8" (front to back) X 1-1/4" (deep). Installs easily by replacing the cooking grates with the griddle. Constructed of durable carbon steel that delivers heat evenly. Genuine Weber Part.

"New Style", set of 2 warming rack mounting brackets for Weber Genesis II models. Mounting hardware and installation instructions included. Genuine Weber Part.

Porcelain enameled cast iron "sear grate".  Custom fit for Weber Genesis II and Genesis II LX "300/400/600" Series, model years 2017 and newer.  Measures 18-7/8" front to back X 13-1/2" left to right (including the mounting tabs).  This large grate is perfect for searing steaks and chops.  Genuine Weber Part.

Set of "2" main burner control knobs for Weber Genesis "II" (model years 2017 and newer).  The 2-7/8" diameter knobs feature a gray plastic body with chrome trim and a red position indicator. The valve stem shaft extends 3/8" beyond the bottom edge of the knob. Genuine Weber Part.

Set of 2 "lighted" main burner control knobs for Weber Genesis II "LX" (model years 2017 and newer). The 2-7/8" diameter knobs feature a gray plastic body with chrome trim, translucent skirt for emitting light, a red position indicator and a rain boot on the valve stem shaft. The valve stem shaft extends 3/8" beyond the bottom edge of the knob. Genuine Weber Part.

"Set of 2" caster "leg inserts" for Weber Genesis II and II LX (2019 to Present). Each insert measures 3-1/16" long X 1-5/16" wide and features a 1/2" diameter hole for the caster wheel insert stem. IMPORTANT: This is the leg inserts only. For the casters, see part 67067. Genuine Weber Part.

"Set of 2" casters for Weber Genesis II and II LX models, 2017 and newer. Sturdy black plastic construction, the diameter of the caster wheels is 2-7/8". The casters feature a wheel locking mechanism and a 1-3/4" long leg insert stem. IMPORTANT: This is the casters only, the leg inserts are sold separately, see Part 67066. Genuine Weber Part.

"Battery pack head" for lighted control knobs. Fits Weber Genesis II "LX" models, 2017 and newer. Measures 2-3/4" X 2-3/4". Features 4 male flat spade terminals, 2 for the lights connections and 2 for the momentary switch. This part pairs with a "battery pack housing", Weber Part 70880, sold separately.  Mounting hardware (3 screws) and installation instructions included. Genuine Weber Part.

8" diameter heavy duty gray plastic hub with black rubber tire tread. Fits Genesis "II" and "II/LX" models, 2017 and newer. Axle cotter pin, starred hub cap insert and installation instructions included. Genuine Weber Part. Sold individually.

Momentary light switch for "lighted" control knobs. Fits all Genesis II "LX" models (2017-2021) and Genesis 300/400 Series (2022-Current). Features a centered push button with "light bulb" symbol mounted inside of a chrome bezel, two male flat spade terminals for wire connections and two "snap-in-place" mounting tabs. Installation instructions included. Replaces Part 66077. Genuine Weber Part.

"Battery Pack Housing", fits Summit 470/670 (model years 2007 and newer) and Genesis II "LX" (2017 and newer). Holds three "D" cell batteries (batteries not included). This part matches with a battery pack "head", Weber part 70879 (Summit) and part 67202 (Genesis II LX), sold separately. Genuine Weber Part.

Set of "2" stainless steel vented heat deflectors (installed below the burners) for Weber Genesis "II" 210 models (2017 and newer). Each deflector measures 12-1/2" long (measured along the top peak) and 4-1/4" wide (width measurement made from edge to edge with deflector upside down).  Note: Remove protective plastic film from the deflector prior to installing/using.

Set of "3" stainless steel vented heat deflectors (installed below the burners) for Weber Genesis "II" 310 models (2017 and newer). Each deflector measures 12-1/2" long (measured along the top peak) and 4-1/4" wide (width measurement made from edge to edge with deflector upside down).  Note: Remove protective plastic film from the deflector prior to installing/using.

Set of "4" stainless steel vented heat deflectors (installed below the burners) for Weber Genesis "II" 410 models (2017 and newer). Each deflector measures 12-1/2" long (measured along the top peak) and 4-1/4" wide (width measurement made from edge to edge with deflector upside down).  Note: Remove protective plastic film from the deflector prior to installing/using.

Set of "6" stainless steel vented heat deflectors (installed below the burners) for Weber Genesis "II" 610 models (2017 and newer). Each deflector measures 12-1/2" long (measured along the top peak) and 4-1/4" wide (width measurement made from edge to edge with deflector upside down).  Note: Remove protective plastic film from the deflector prior to installing/using.

Set of "2" stainless steel vented heat deflectors (installed below the burners) for Weber Genesis II "LX" 240 models (2017 and newer). Each deflector measures 12-1/2" long (measured along the top peak) and 4-1/4" wide (width measurement made from edge to edge with deflector upside down).  Note: Remove protective plastic film from the deflector prior to installing/using.

Set of "3" stainless steel vented heat deflectors (installed below the burners) for Weber Genesis II "LX" 340 models (2017-21) and Genesis 300 Series (2022-Current). Each deflector measures 12-1/2" long (measured along the top peak) and 4-1/4" wide (width measurement made from edge to edge with deflector upside down).  Note: Remove protective plastic film from the deflector prior to installing/using.

Set of "4" stainless steel vented heat deflectors (installed below the burners) for Weber Genesis II "LX" 440 models (2017-21) and Genesis 400 Series (2022-Current). Each deflector measures 12-1/2" long (measured along the top peak) and 4-1/4" wide (width measurement made from edge to edge with deflector upside down).  Note: Remove protective plastic film from the deflector prior to installing/using.

Set of "6" stainless steel vented heat deflectors (installed below the burners) for Weber Genesis II "LX" 640 models (2017 and newer). Each deflector measures 12-1/2" long (measured along the top peak) and 4-1/4" wide (width measurement made from edge to edge with deflector upside down).  Note: Remove protective plastic film from the deflector prior to installing/using.

12-1/2" X 4-1/8" stainless steel vented heat deflector. Fits all Weber Genesis II models. Sold individually, more than one required.  Quality Aftermarket Part. 

Genesis II and Genesis II LX:

200 Series (2 Main Burners): requires 2 Deflectors

300 Series (3 Main Burners): requires 3 Deflectors

400 Series (4 Main Burners): requires 4 Deflectors

600 Series (6 Main Burners): requires 6 Deflectors

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

• 1 On/Off Ball Valve Quick Connect Fitting
• Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 3/8" Gas Line Quick Connect Fitting

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Genuine Weber® 21in. Propane(LP) Hose and Regulator Assembly for Weber Spirit II and Weber Genesis II 210/300/400/LX 240 models. 21in. hose with one 3/8in. Flare Female Hex Nut Manifold Connection Fitting and one regulator with QCC1 large hand nut connection for a common standard propane tank. Overall length of the assembly is 22in. including the regulator, hose and manifold fitting.

Is your BBQ gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator a new Weber propane gas Hose and Regulator Assembly. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

Hose and Regulator Assembly fits the following Weber Grill Models:

• Weber Spirit II (2017-2019)
• Weber Genesis II 210/ LX 240
• Weber Genesis II 300/400 (2017-2019)

What’s Included:

• (1) Genuine Weber® 21in. Propane(LP) Hose and Regulator Assembly for Weber Spirit II and Weber Genesis II 210/300/400/LX 240 models.
• 21in. Propane rated hose
• Attached 3/8in. Flare Female Hex Nut Manifold Connection Fitting
• Weber gas grill regulator
• QCC1 tank connection
• Genuine Weber replacement part

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

Igniter push button switch, for Weber Genesis "II" and Spirit "II" models (2017 and newer). Features soft rubber push button top with a chrome cap that has a "lightning bolt symbol", two male flat spade terminals for wire connections and two snap in place mounting tabs. Installation instructions included. 

Complete ignition kit for Weber Genesis "II" 210 models (2017 and newer). Includes a "AA" two output ignition module with color coded wire terminals and mounting screws, remote push button switch, 2 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 23" and 36", a 42" long dual wire harness for the push button switch to module connection, "AA" battery and wire clips. Installation instructions included. Genuine Weber Part.

Complete ignition kit for Weber Genesis "II" 410 models (2017 and newer). Includes a "AA" four output ignition module with color coded wire terminals and mounting screws, remote push button switch, 4 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 27"/36"/46"/51", a 56" long dual wire harness for the push button switch to module connection, "AA" battery and wire clips. Installation instructions included. Genuine Weber Part.

Complete ignition kit for Weber Genesis "II" 610 models (2017 and newer). Includes a "AA" six output ignition module with color coded wire terminals and mounting screws, remote push button switch, 6 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 27"/32"/36"/46"/51"/59", a 64" long dual wire harness for the push button switch to module connection, "AA" battery and wire clips. Installation instructions included. Genuine Weber Part.

Complete ignition kit for Weber Genesis II "LX" 240 (model years 2017 and newer). Includes a 2 output "AA" ignition module with battery cap, color coded output wire terminals, 2 input terminals for the igniter harness and mounting screws. Also includes, assembled igniter harness with 2 rotary contact control valve switches and wire linkage, 2 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 23"/36", battery and wire clips. Genuine Weber Part.

Complete ignition kit for Weber Genesis II "LX" 340 (model years 2017 and newer). Includes a 4 output "AA" ignition module with battery cap, color coded output wire terminals, 2 input terminals for the igniter harness and mounting screws. Also includes, assembled igniter harness with 3 rotary contact control valve switches and wire linkage, 3 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 27"/36"/46", a 28" long grounding wire with mounting screw,  battery and wire clips.  Installation instructions included. Genuine Weber Part.

Complete ignition kit for Weber Genesis II "LX" 440 (model years 2017 and newer). Includes a 4 output "AA" ignition module with battery cap, color coded output wire terminals, 2 input terminals for the igniter harness and mounting screws. Also includes, assembled igniter harness with 4 rotary contact control valve switches and wire linkage, 4 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 27"/36"/46"/51", battery and wire clips. Installation instructions included. Genuine Weber Part.

Complete ignition kit for Weber Genesis II "LX" 640 (model years 2017 and newer). Includes a 6 output "AA" ignition module with battery cap, color coded output wire terminals, 2 input terminals for the igniter harness and mounting screws. Also includes, assembled igniter harness with 6 rotary contact control valve switches and wire linkage, 6 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 27"/32"/36"/46"/51"/59", battery and wire clips. Installation instructions included. Genuine Weber Part.

Complete ignition kit for Weber Genesis "II" 310 models (2017 and newer). Includes a "AA" four output ignition module with color coded wire terminals and mounting tabs, remote push button switch with a 45" long dual wire harness, 3 main burner electrodes with white ceramic insulator/collector boxes and color coded molded-in wires in lengths of 27"/36"/46", 24" long grounding wire, "AA" battery and wire clip. Installation instructions included. This kit is the Weber new replacement for older part number 66354. Genuine Weber Part.

"AA" ignition module for Weber Genesis II, 210 and 240 (LX). Features two color coded output terminals (round post), two input terminals (flat male spade) for the push button switch, "AA" battery chamber with screw on cap (cap has battery polarization indication marking) and two mounting screws. Installation instructions included. Genuine Weber Part.

"AA" ignition module for Weber Genesis II, 610 and 640 (LX). Features six color coded output terminals (round post), two input terminals (flat male spade) for the push button switch, "AA" battery chamber with screw on cap (cap has battery polarization indication marking) and two mounting screws. Installation instructions included. Genuine Weber Part.

"AA" ignition module for Weber Genesis II, 310/410 and 240/440 (LX). Features four color coded output terminals (round post), two input terminals (flat male spade) for the push button switch, "AA" battery chamber with screw on cap (cap has battery polarization indication marking) and two mounting screws. Installation instructions included. Genuine Weber Part.

"AA" ignition module for Weber Genesis II, 310/410 and 240/440 (LX). Features four color coded output terminals (round post), two input terminals (flat male spade) for the push button switch, "AA" battery chamber with screw on cap (cap has battery polarization indication marking) and two mounting screws. Installation instructions included. Genuine Weber Part.

Genuine Weber® Grills easy to clean, disposable aluminum foil disposable grease drip pan liners. Perfect-fit 8-1/2in. x 6in. Liners, 10 per package.

A simple disposable drip pan liner will save you from greasy maintenance. Line the drip tray of your grill and make the disposal of grease easy and clean!

Fitment:

• Compatible with Weber Q, Pulse, Lumin, Weber Traveler, Spirit, Spirit II, 2022 Genesis 300/400, Genesis II 200/300, Genesis.

What’s Included:

• (10) Weber Aluminum Foil Grease Tray Liners (8-1/2in. x 6in.)

Genuine Weber® Grills easy to clean, disposable aluminum foil disposable grease drip pan liners. Perfect-fit 11in. x 5in. Liners, 10 per package.

A simple disposable drip pan liner will save you from greasy maintenance. Line the drip tray of your grill and make the disposal of grease easy and clean!

Fitment:

• Weber Smoke Fire, Weber Summit Gold 6-Burner, Platinum 6-Burner, Summit S-400, S-600, Genesis II and Genesis II LX 400/600 Series.

What’s Included:

• (10) Weber Aluminum Foil Grease Tray Liners (11in. x 5in. x 2-1/2in.)

Set of "2" burner tube mounting brackets for Weber Genesis II models. These brackets are mounted on the back wall of the firebox and are designed to receive the "knife" end of the burner tubes. Mounting hardware, 2 screws (one per bracket), included. Genuine Weber Part.

Temperature gauge "bezel" for Weber Genesis II and Genesis II LX, "model years 2017 to current". Accepts temperature gauge Part 67731 (sold separately). Measures 3" in diameter. Genuine Weber Part.

Grease catch pan retainer clip. Gray plastic clip measures 5" in length and features directional arrow in molding to assist installation. Important: Fits Genesis II "open cart models only" (2017 and newer), this part does not fit any Genesis II "LX" models. Genuine Weber Part.

Genesis, Genesis II and Summit series temperature indicator.  Dial face incremented from 0 - 700 degrees F. Measures 2-3/8" in diameter. Probe length is 1-7/8" (measured from back of the guage to end of probe; Probe diameter is 1/4".  Includes mounting wing nut.  Fits 2007 to current Summit models, 2007 to 2016 Genesis 300 Series and 2017 to current Genesis II and Genesis II LX models.  Genuine Weber Part.

Convert your Weber Genesis or Genesis II "300 Series" grill to a full-size griddle. Measures 25-3/4" (left to right) X 18-5/8" (front to back) X 1-1/4" (deep). Installs easily by replacing the cooking grates with the griddle. Constructed of durable carbon steel that delivers heat evenly. Genuine Weber Part.

"New Style", set of 2 warming rack mounting brackets for Weber Genesis II models. Mounting hardware and installation instructions included. Genuine Weber Part.

Grease catch pan kit for Weber Summit, SmokeFire, Genesis II and Genesis II 4 and 6 burner models. Includes catch pan and two catch pan liners (Part 6498). Aluminum pan measures 5" X 11" to the outside lips. Genuine Weber Part.

Genuine Weber Premium Custom Fit Grill Cover for Weber Genesis II and Genesis II LX 400 Series models manufactured in 2017 and afterwards. Features a waterproof, fade resistant polyester material that breathes for better moisture control and has fastening straps to secure the cover to the grill so you won’t find it in your neighbors yard. Dimensions are 65in. across wide, 25in. from front to back, and 44-1/2in. tall.

A Weber Premium Custom Fit Grill Cover is like the superhero cape for your BBQ, enhancing its looks when not in action; and it's not just about keeping sun, rain, snow, and debris funking up the grills looks; it's about protecting your investment. Protect your vulnerable grill from weather damage, and keep critters like squirrels and birds from turning your grill into their personal playground with a grill cover from grillparts.com.

Fits the following Weber grills:

• Weber Genesis II (2017 and newer)
• Genesis II LX 400 (2017 and newer)

What’s Included:

• (1) Weber Premium Custom Fit Grill Cover for Weber Genesis II and Genesis II LX 400 gas grills.
• Genuine Weber Part.

Weber iGrill 3 Meat Thermometer with Bluetooth connectivity for remote temperature monitoring. Includes two iGrill Pro Meat Probes with 4ft. cables.

FITS into the integrated "iGrill 3" receptacle on Weber Spirit II, Genesis II and Genesis II LX models only. Genesis II, Genesis II LX, and Spirit II gas grills have an “iGrill 3 Ready” plate on the side table.

For all other Brands and Models of gas and charcoal grills, check out the iGrill 2 Digital Meat Thermometer Item #7203.

The Weber iGrill 3 is an app-connected digital meat thermometer that allows you to monitor the doneness of up to four cuts of meat, from beginning to end, and notifies you on your smart device once food has reached the perfect temperature to serve. Whether you’re a seasoned grill master, or just digging in, it has never been easier to execute the perfect meal.

Download the free Weber "iGrill" app and take advantage of all the iGrill 3 features from your mobile device.

What’s Included:

• (1) Weber iGrill 3 digital meat thermometer hub with 150ft. Range Bluetooth Connectivity
• (2) Pro Stainless Steel Meat probes with 4ft. cables
• (2) Silicon probe wraps
• (1) Tank Scale and Sensor Kit
• (3) AA batteries
• (1) Battery Pack
• (1) User Guide

Features:

• Includes two pro-level meat probes that withstand higher heat and steam, ensuring they endure the rigors of intense grilling or smoking sessions.
• 4-probe capability to easily track more than 1 temperature at once.
• Boasts an impressive 150-foot Bluetooth smart range, allowing you to roam freely and socialize with guests while still keeping an eye on your cooking progress.
• Remarkable 250-hour battery life allows you to grill without interruption and ensures you can rely on it for multiple cooking sessions before needing a recharge.
• Smart devices compatible with the Weber iGrill App for Apple and Android.

With the iGrill 3 bluetooth connected digital meat thermometer from Weber, you’ll take the guess work out of grilling by knowing the exact temperature of the food you're cooking, without lifting the lid of the grill.

 

Porcelain enameled cast iron griddle. Custom fit for Weber Genesis II and Genesis II LX 300/400/600 Series, "model years 2017 and newer". Measures 19" front to back X 13-1/4" left to right. Features exceptional heat retention, easy to clean surface and a sloped cooking surface to help drain drippings away from your food and into the grease reservoir. Genuine Weber Part.

Rotisserie kit for Weber Genesis 300 (2007-2016), Genesis II and Genesis II LX "200 and 300 Series" (2017 to current).  Fits firebox widths 20-3/8", 26-3/8" and 27-1/2". Kit includes heavy duty motor (supports up to 20 lbs.), motor mounting bracket, and stainless steel shaft, forks (Qty. 2), handle and hardware. Installation instructions included. Genuine Weber Part.

Rotisserie kit for Weber Genesis II and Genesis II LX "400 and 600" Series (2017 to current).  Fits firebox widths 34-1/2" and 41".  Kit includes heavy duty motor (supports up to 20 lbs.), motor mounting bracket, and stainless steel shaft, forks (Qty. 4), handle and hardware. Installation instructions included. Genuine Weber Part.

The Weber Grill’n Go Handle Mount LED Flash Light with built-in motion sensor fits a large variety of Weber Gas Grills, and can be easily mounted, then removed for a portable flash light.

The Weber Grill’n Go BBQ LED light is a multifunctional grill light that easily attaches to the grill handle, and also detaches for extra light where you need it. Its motion sensor turns on when the lid is lifted and turns off once closed to save battery life, and added ease while grilling.

• LED illuminates the entire cooking surface
• On/off motion sensor saves battery life
• Can be detached and used as a flashlight
• Easily attaches to the grill handle

Fits "round handles" on the following Weber Grills:

• Weber Spirit (2007 and newer)
• Weber Genesis (2007 and newer)
• Weber Summit (2007 and newer)
• All Weber Spirit II
• All Weber Genesis II

What's Included:

• (1) Weber Grill’n Go BBQ LED Light kit
• LED Light (which can be removed from the mounting collar and used as a flashlight)
• Grill Handle Light Mounting Collar
• Three "AAA" batteries and mounting/use instructions.
• Genuine Weber Part.

Weber Premium Grill Cover. Fits Genesis, Genesis II and Genesis II LX "300" Series and Genesis 300 Series 2022-Current. Measures 63" left to right X 25-1/2" front to back X 43-1/2" top to bottom. Protect your grill from the elements with this cover made from breathable, weather resistant material that is also UV resistant to prevent fading. Features fastening Velcro straps to secure the cover to your grill. Genuine Weber Part.

Genuine Weber Aluminum Grease Catch Pan and One Single Disposable Foil Liner. Fits Weber Spirit (2009 and newer), most Weber Genesis, Genesis II (2016+), Spirit, Summit Silver/Gold/Platinum and Summit 400/600 (prior to 2000) gas grills.

IMPORTANT: Please verify Catch Pan dimensions:
Pan measures 8-5/8in. x 6-1/8in. wide (width measurement includes the folded side rail extension).

Fits the following Weber Gas Grills:

• Weber Genesis
• Genesis II 2 and 3 Burner Models (2016+)
• Spirit (2009 and newer)
• Summit Silver/Gold/Platinum
• Summit 400/600 (prior to 2000)

What's Included:

• (1) Weber Grills Aluminum Grease Catch Pan With Foil Liner, 8-5/8in. x 6-1/8in.
• (1) Disposable Foil Liner
• Foil liners available in a pack of 10, Part# 6415.
• Genuine Weber Part
• Please verify dimensions

Porcelain enameled cast iron "sear grate".  Custom fit for Weber Genesis II and Genesis II LX "300/400/600" Series, model years 2017 and newer.  Measures 18-7/8" front to back X 13-1/2" left to right (including the mounting tabs).  This large grate is perfect for searing steaks and chops.  Genuine Weber Part.