Weber Smokefire Grill & Smoker Parts

grill parts: Auger, Weber SmokeFire
Weber SmokeFire grill parts: Auger, Weber SmokeFire (image #1) Weber SmokeFire grill parts: Auger, Weber SmokeFire (image #2) Weber SmokeFire grill parts: Auger, Weber SmokeFire (image #3)

Auger, Weber SmokeFire

Item# 68982
This item is in stockIN STOCK BUT SELLING FAST
Retail: $44.63
$38.99
Replacement pellet auger for Weber SmokeFire models. Measures 7-3/4" long and constructed of heavy gauge stainless steel. Features a thru-hole in the auger shaft at the drive motor end, to receive the motor driveshaft securing screw. Hardware (motor driveshaft to auger, "mounting screw") and installation instructions included. Genuine Weber Part.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

  • Qty:

Cooking Grates | Weber SmokeFire
Parts for Weber SmokeFire Grills: 23-1/2" X 17-3/16" Two Piece "LOWER" Cooking Grate Set, Weber SmokeFire (EX-4)
23-1/2" X 17-3/16" Two Piece "LOWER" Cooking Grate Set, Weber SmokeFire (EX-4)
Item# 68925
23-1/2" X 17-3/16" nickel plated steel 2-piece "LOWER" cooking grate set. Each grate measures 17-3/16" front to back X 11-3/4" wide, for a total set width of 23-1/2". Constructed of 1/4" nickel plated steel rod. Fits...
In Stock
$74.99
View
Add
Parts for Weber SmokeFire Grills: 23-3/4" X 10" "Upper" Cooking Grate, Weber Smokefire (EX-4)
23-3/4" X 10" "Upper" Cooking Grate, Weber Smokefire (EX-4)
Item# 68931
23-3/4" X 10" nickel plated steel "UPPER" cooking grate for Weber SmokeFire (EX-4). The surtace area of the grate measures 23-3/4" long by 10" wide. Features a 1" tall fence at the back edge to prevent food from falling off...
In Stock
$64.99
View
Add
Parts for Weber SmokeFire Grills: Grate Clips (Set of Two), Weber SmokeFire
Grate Clips (Set of Two), Weber SmokeFire
Item# 69239
Set of two cooking grate clips for Weber SmokeFire models.  Installation instructions included. Genuine Weber Part.
In Stock
$29.99
View
Add

Grill Exterior | Weber SmokeFire
Parts for Weber SmokeFire Grills: 2-7/8" Rolling Caster, Weber SmokeFire
2-7/8" Rolling Caster, Weber SmokeFire
Item# 68917
Rolling caster for Weber SmokeFire models. The caster wheel measures 2-7/8" in diameter. Features smooth (ball-bearing) 360 degrees swivel and a 1-1/2" long threaded mounting stud bolt. Sold individually. Installation instructions included. ...
In Stock
$26.99
View
Add
Parts for Weber SmokeFire Grills: 2-7/8" Locking Caster, Weber SmokeFire
2-7/8" Locking Caster, Weber SmokeFire
Item# 68918
Locking caster for Weber SmokeFire models. The caster wheel measures 2-7/8" in diameter. Features smooth (ball-bearing) 360 degrees swivel ability, a 1-1/2" long threaded mounting stud bolt and a "On/Off" foot pedal brake. Sold...
In Stock
$26.99
View
Add

Diffuser, Flavorizer Bars | Weber SmokeFire
Parts for Weber SmokeFire Grills: 36in. Flavorizer Bar Support Bracket - Weber SmokeFire EX-6 (Replaces Weber #68936)
36in. Flavorizer Bar Support Bracket - Weber SmokeFire EX-6 (Replaces Weber #68936)
Item# WEBPSB36
High quality upgraded aluminiumized steel Weber SmokeFire EX-6 (6 burner) Flavorizer Bar Support Bracket. Sold individually more than one required. Measures 36in. long and is designed to support 1 large and 6 small flavor bars, listed...
In Stock
$38.99
View
Add
Parts for Weber SmokeFire Grills: Weber SmokeFire Flavorizer Bar Set - 5pc. - Stainless Steel - (L:17-1/8in. x W:2-1/2in. x H:2-1/8in.)
Weber SmokeFire Flavorizer Bar Set - 5pc. - Stainless Steel - (L:17-1/8in. x W:2-1/2in. x H:2-1/8in.)
Item# 69262
Genuine Weber® Flavorizer Bars made in Stainless Steel for Weber SmokeFire (EX-6) grills. Set of five Flavorizer Bars/Burner Shields that measure L:17-1/8in. x W:2-1/2in. x H:2-1/8in. Every bar features a cut-out vent on each side. Weber® Stainless...
In Stock
$69.99
View
Add
Parts for Weber SmokeFire Grills: 17-1/8" X 2-1/2" Set Of "4" Stainless Steel Flavorizer Bars, Weber SmokeFire (EX-4)
17-1/8" X 2-1/2" Set Of "4" Stainless Steel Flavorizer Bars, Weber SmokeFire (EX-4)
Item# 69261
Set of "4" stainless steel flavorizer bars for Weber SmokeFire (EX-4). Each bar measures 17-1/8" long (measured along the bottom edge), 16-1/8" long (measured along the top peak of the tent), 2-1/2" wide (across the base) and they...
In Stock
$46.99
View
Add
Parts for Weber SmokeFire Grills: Large Center Flavorizer Bar - Stainless Steel - Weber SmokeFire (16-3/4in. x 7-7/8in.)
Large Center Flavorizer Bar - Stainless Steel - Weber SmokeFire (16-3/4in. x 7-7/8in.)
Item# WEBPCHP
Upgraded Weber SmokeFire large center Flavorizer Bar, crafted out of 304 Stainless Steel . The length measures 16-3/4in. x 7-7/8in. and 15-5/8 along the peak. One Required.  Quality aftermarket part. Made in USA. Replaces Weber OEM Part...
In Stock
$49.99
View
Add
Parts for Weber SmokeFire Grills: 17-1/8" X 2-1/2" Set Of "4" Porcelain Coated Flavorizer Bars, Weber SmokeFire EX-4
17-1/8" X 2-1/2" Set Of "4" Porcelain Coated Flavorizer Bars, Weber SmokeFire EX-4
Item# WSFFB4
Set of "4" porcelain coated flavorizer bars. Fit Weber SmokeFire EX-4 models.  Each bar measures 17-1/8" measured along the bottom edges and 16-1/8" measured along the top peak of the tent. The width of each bar is 2-1/2", and...
In Stock
$36.95
View
Add
Parts for Weber SmokeFire Grills: 23-3/4" Flavorizer Bar Support Bracket, SmokeFire EX-4 (Replaces Part 68935)
23-3/4" Flavorizer Bar Support Bracket, SmokeFire EX-4 (Replaces Part 68935)
Item# WEBPSB24
Aluminized steel flavorizer bar support bracket for Weber SmokeFire (EX-4). Measures 23-3/4" long and is designed to support 1 large and 4 small flavor bars. The support bracket is mounted to either the front or back of the firebox. Sold individually...
In Stock
$33.99
View
Add
Parts for Weber SmokeFire Grills: 17-1/8" X 2-1/2" Set Of "6" Porcelain Coated Flavorizer Bars, Weber SmokeFire EX-6
17-1/8" X 2-1/2" Set Of "6" Porcelain Coated Flavorizer Bars, Weber SmokeFire EX-6
Item# WSFFB6
Set of "6" porcelain coated flavorizer bars. Fit Weber SmokeFire EX-6 models.  Each bar measures 17-1/8" measured along the bottom edges and 16-1/8" measured along the top peak of the tent. The width of each bar is 2-1/2", and...
In Stock
$50.99
View
Add

Igniter Components | Weber SmokeFire
Parts for Weber SmokeFire Grills: Glow Plug Bracket Assembly, Weber SmokeFire
Glow Plug Bracket Assembly, Weber SmokeFire
Item# 68956
Glow plug bracket assembly for Weber SmokeFire models. The bracket measures 8-7/8" long with the glow plug receiver on one end and the mounting flange on the other. The red/black dual wire harness with 2-pin male plug connector extends 9-7/8" beyond...
In Stock
$42.99
View
Add
Parts for Weber SmokeFire Grills: Glow Plug Igniter, Weber SmokeFire
Glow Plug Igniter, Weber SmokeFire
Item# 69436
Glow plug igniter for Weber SmokeFire grill models. Measures 3-3/4" long. Installation instructions included. Genuine Weber Part.
In Stock
$25.99
View
Add

Random Parts | Weber SmokeFire
Parts for Weber SmokeFire Grills: 15-3/8" X 11-1/2" Grease Tray, Weber "SmokeFire" Models
15-3/8" X 11-1/2" Grease Tray, Weber "SmokeFire" Models
Item# 64762
15-3/8" X 11-1/2" rectangular grease tray for Weber "SmokeFire" models. Features angled front and rear walls with the painted black front wall having a hand grip on the bottom edge for ease of slide out access. Designed to hold Weber...
In Stock
$184.99
View
Add
Parts for Weber SmokeFire Grills: Grease Catch Pan Liners - 10 Pack - (11in. x 5in.)
Grease Catch Pan Liners - 10 Pack - (11in. x 5in.)
Item# 6498
Genuine Weber® Grills easy to clean, disposable aluminum foil disposable grease drip pan liners. Perfect-fit 11in. x 5in. Liners, 10 per package. A simple disposable drip pan liner will save you from greasy maintenance. Line the drip tray of your grill...
In Stock
Retail: $18.49
$15.49
View
Add
Parts for Weber SmokeFire Grills: Fan Guard, Weber SmokeFire
Fan Guard, Weber SmokeFire
Item# 68953
Fan Guard for Weber SmokeFire models. 4-3/4" X 4-3/4" black plastic grid fan guard. Includes 4 mounting screws and installation instructions. Genuine Weber Part.
In Stock
Retail: $15.64
$14.59
View
Add
Parts for Weber SmokeFire Grills: Auger, Weber SmokeFire
Auger, Weber SmokeFire
Item# 68982
Replacement pellet auger for Weber SmokeFire models. Measures 7-3/4" long and constructed of heavy gauge stainless steel. Features a thru-hole in the auger shaft at the drive motor end, to receive the motor driveshaft securing screw. Hardware (motor...
In Stock
Retail: $44.63
$38.99
View
Add
Parts for Weber SmokeFire Grills: Grate Clips (Set of Two), Weber SmokeFire
Grate Clips (Set of Two), Weber SmokeFire
Item# 69239
Set of two cooking grate clips for Weber SmokeFire models.  Installation instructions included. Genuine Weber Part.
In Stock
$29.99
View
Add
Parts for Weber SmokeFire Grills: Grease Scraping Tool - by Weber® (12in. x 1-5/8in.)
Grease Scraping Tool - by Weber® (12in. x 1-5/8in.)
Item# 69257
Genuine Weber® Grease Scraping Tool for BBQ grills. This handy 12in. composite plastic tool with a 1-5/8in. wide angled head edge is perfect for cleaning the inside of your BBQ firebox, getting gunk of griddles, grease trays, and more.  Includes...
In Stock
Retail: $17.84
$16.99
View
Add
Parts for Weber SmokeFire Grills: Tool Hooks (Set of Two), Weber SmokeFire
Tool Hooks (Set of Two), Weber SmokeFire
Item# 69263
"Set of two" chrome finish "tool hooks" for Weber Traveler grill models. Perfect for conveniently hanging grilling utensils. Mounting hardware (2 screws) included. Genuine Weber Part.
In Stock
$13.99
View
Add
Parts for Weber SmokeFire Grills: Pellet Feed "Auger/Motor/Tube/Spout Assembly", Weber SmokeFire
Pellet Feed "Auger/Motor/Tube/Spout Assembly", Weber SmokeFire
Item# 69376
Fully assembled: Pellet feed motor, auger and auger tube/spout weldment for Weber SmokeFire models. Hardware and installation instructions included. Genuine Weber Part.
In Stock
$179.99
View
Add
Parts for Weber SmokeFire Grills: Burn Pot, Grate and Slide - Weber SmokeFire Wood Fired Pellet Grill
Burn Pot, Grate and Slide - Weber SmokeFire Wood Fired Pellet Grill
Item# 64763
Genuine Weber replacement Burn Pot System for Weber SmokeFire Pellet Grills. Compatible with Weber SmokeFire EX4, Smokefire EX6 and SmokeFire Sear EX6 series pellet grills. Features an updated welded design, and includes the burn pot with attached pellet...
In Stock
$40.89
View
Add
Parts for Weber SmokeFire Grills: Grease Catch Pan Kit, Weber Summit, SmokeFire, Genesis II and Genesis II LX 400/600 Series
Grease Catch Pan Kit, Weber Summit, SmokeFire, Genesis II and Genesis II LX 400/600 Series
Item# 70379
Grease catch pan kit for Weber Summit, SmokeFire, Genesis II and Genesis II 4 and 6 burner models. Includes catch pan and two catch pan liners (Part 6498). Aluminum pan measures 5" X 11" to the outside lips. Genuine Weber Part.
In Stock
$28.45
View
Add