23-1/2" X 17-3/16" nickel plated steel 2-piece "LOWER" cooking grate set. Each grate measures 17-3/16" front to back X 11-3/4" wide, for a total set width of 23-1/2". Constructed of 1/4" nickel plated steel rod. Fits Weber SmokeFire (EX-4). Genuine Weber Part.

23-3/4" X 10" nickel plated steel "UPPER" cooking grate for Weber SmokeFire (EX-4). The surtace area of the grate measures 23-3/4" long by 10" wide. Features a 1" tall fence at the back edge to prevent food from falling off the grate. Genuine Weber Part.

Set of two cooking grate clips for Weber SmokeFire models.  Installation instructions included. Genuine Weber Part.

Rolling caster for Weber SmokeFire models. The caster wheel measures 2-7/8" in diameter. Features smooth (ball-bearing) 360 degrees swivel and a 1-1/2" long threaded mounting stud bolt. Sold individually. Installation instructions included. Genuine Weber Part.

Locking caster for Weber SmokeFire models. The caster wheel measures 2-7/8" in diameter. Features smooth (ball-bearing) 360 degrees swivel ability, a 1-1/2" long threaded mounting stud bolt and a "On/Off" foot pedal brake. Sold individually. Installation instructions included. Genuine Weber Part.

High quality upgraded aluminiumized steel Weber SmokeFire EX-6 (6 burner) Flavorizer Bar Support Bracket. Sold individually more than one required. Measures 36in. long and is designed to support 1 large and 6 small flavor bars, listed below.

What’s Included:

• (1) Weber SmokeFire EX-6 36in. Flavorizer Bar Support Bracket
• Sold individually more than one required.
• Replaces Weber part #68936.
• Made in USA.

Related Parts:

• Large Weber SmokeFire Flavorizer Bar (1): WEBPCHP
• Small Weber SmokeFire Flavorizer Bars (5): 69262

Genuine Weber® Flavorizer Bars made in Stainless Steel for Weber SmokeFire (EX-6) grills. Set of five Flavorizer Bars/Burner Shields that measure L:17-1/8in. x W:2-1/2in. x H:2-1/8in. Every bar features a cut-out vent on each side.

Weber® Stainless Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Weber Flavorizer Bars from Grillparts.com.

Fits these following Weber grill models:

• Weber SmokeFire (EX-6)
• Genuine Weber Part
• Weber Part Number #69262

Related Parts:

• Weber 36in. SmokeFire Flavorizer Bar Support Bracket: WEBPSB36
• Large Weber SmokeFire Flavorizer Bar (1): WEBPCHP
• Small Weber SmokeFire Flavorizer Bars (5): 69262

Set of "4" stainless steel flavorizer bars for Weber SmokeFire (EX-4). Each bar measures 17-1/8" long (measured along the bottom edge), 16-1/8" long (measured along the top peak of the tent), 2-1/2" wide (across the base) and they stand 2-1/8" tall. Every bar features a cut-out vent on each side. Genuine Weber Part.

Upgraded Weber SmokeFire large center Flavorizer Bar, crafted out of 304 Stainless Steel . The length measures 16-3/4in. x 7-7/8in. and 15-5/8 along the peak. One Required. 

Quality aftermarket part. Made in USA. Replaces Weber OEM Part #68947

Fits the following Weber SmokeFire Grills

• SMOKEFIRE 24
• SMOKEFIRE EX4
• SMOKEFIRE EXL4
• 22510001
• 22510201
• SMOKEFIRE EPX6
• SMOKEFIRE EXL6

Related Parts:

• Weber 36in. SmokeFire Flavorizer Bar Support Bracket: WEBPSB36
• Large Weber SmokeFire Flavorizer Bar (1): WEBPCHP
• Small Weber SmokeFire Flavorizer Bars (5): 69262

Set of "4" porcelain coated flavorizer bars. Fit Weber SmokeFire EX-4 models.  Each bar measures 17-1/8" measured along the bottom edges and 16-1/8" measured along the top peak of the tent. The width of each bar is 2-1/2", and they stand 2-1/8" tall. Feature a cut out vent on each side. Quality Aftermarket Part.

Set of "6" porcelain coated flavorizer bars. Fit Weber SmokeFire EX-6 models.  Each bar measures 17-1/8" measured along the bottom edges and 16-1/8" measured along the top peak of the tent. The width of each bar is 2-1/2", and they stand 2-1/8" tall. Feature a cut out vent on each side. Quality Aftermarket Part.

Aluminized steel flavorizer bar support bracket for Weber SmokeFire (EX-4). Measures 23-3/4" long and is designed to support 1 large and 4 small flavor bars. The support bracket is mounted to either the front or back of the firebox. Sold individually more than one required. Replaces part 68935. Made in USA.

Glow plug bracket assembly for Weber SmokeFire models. The bracket measures 8-7/8" long with the glow plug receiver on one end and the mounting flange on the other. The red/black dual wire harness with 2-pin male plug connector extends 9-7/8" beyond the mounting flange. Hardware (mounting flange screw) and installation instructions included. Genuine Weber Part.

Glow plug igniter for Weber SmokeFire grill models. Measures 3-3/4" long. Installation instructions included. Genuine Weber Part.

15-3/8" X 11-1/2" rectangular grease tray for Weber "SmokeFire" models. Features angled front and rear walls with the painted black front wall having a hand grip on the bottom edge for ease of slide out access. Designed to hold Weber grease pan, part 70379 and utilize Weber grease pan aluminum liner, part 6498 (both sold separately). Genuine Weber Part.

Genuine Weber® Grills easy to clean, disposable aluminum foil disposable grease drip pan liners. Perfect-fit 11in. x 5in. Liners, 10 per package.

A simple disposable drip pan liner will save you from greasy maintenance. Line the drip tray of your grill and make the disposal of grease easy and clean!

Fitment:

• Weber Smoke Fire, Weber Summit Gold 6-Burner, Platinum 6-Burner, Summit S-400, S-600, Genesis II and Genesis II LX 400/600 Series.

What’s Included:

• (10) Weber Aluminum Foil Grease Tray Liners (11in. x 5in. x 2-1/2in.)

Fan Guard for Weber SmokeFire models. 4-3/4" X 4-3/4" black plastic grid fan guard. Includes 4 mounting screws and installation instructions. Genuine Weber Part.

Replacement pellet auger for Weber SmokeFire models. Measures 7-3/4" long and constructed of heavy gauge stainless steel. Features a thru-hole in the auger shaft at the drive motor end, to receive the motor driveshaft securing screw. Hardware (motor driveshaft to auger, "mounting screw") and installation instructions included. Genuine Weber Part.

Set of two cooking grate clips for Weber SmokeFire models.  Installation instructions included. Genuine Weber Part.

Genuine Weber® Grease Scraping Tool for BBQ grills. This handy 12in. composite plastic tool with a 1-5/8in. wide angled head edge is perfect for cleaning the inside of your BBQ firebox, getting gunk of griddles, grease trays, and more.  Includes attached hanging loop.

Crafted with a firm yet flexible handle, it gives you the perfect grip and control while you scrub away. This nifty tool is your ultimate sidekick for tackling the gunk and grime inside your BBQ firebox, on griddle grease traps, BBQ baskets and trays, and so much more. It’s wide enough to blitz through those big, greasy areas, yet compact and nimble for those sneaky, hard-to-reach spots.

What’s Included:

• (1) Genuine Weber® Composite Plastic Grease Scraping Tool (12in. length with 1-5/8in. scraping head) and hanging loop.

"Set of two" chrome finish "tool hooks" for Weber Traveler grill models. Perfect for conveniently hanging grilling utensils. Mounting hardware (2 screws) included. Genuine Weber Part.

Fully assembled: Pellet feed motor, auger and auger tube/spout weldment for Weber SmokeFire models. Hardware and installation instructions included. Genuine Weber Part.

Grease catch pan kit for Weber Summit, SmokeFire, Genesis II and Genesis II 4 and 6 burner models. Includes catch pan and two catch pan liners (Part 6498). Aluminum pan measures 5" X 11" to the outside lips. Genuine Weber Part.

Genuine Weber replacement Burn Pot System for Weber SmokeFire Pellet Grills. Compatible with Weber SmokeFire EX4, Smokefire EX6 and SmokeFire Sear EX6 series pellet grills. Features an updated welded design, and includes the burn pot with attached pellet grate, pellet slide and two mounting screws. Installation instructions included. (Replaces Part 69455)

Let’s face it—your grill’s burn pot has seen better days. Replacing it is like giving your Weber SmokeFire a fresh start at life. You’ll get better heat, and less pellet drama. Plus, it burns more efficiently, making your pellets last longer. A new Weber Smokefire burn pot also means no more flare-ups that could turn your ribs into charcoal, and it keeps your grill running like a champ. So why wait? Upgrade now, and give your grill the love it deserves—your taste buds will thank you.

What’s Included:
(1) Weber OEM Burn Pot with integrated welded-in grate
(1) Weber OEM Pellet Slide

• Genuine Weber Part. 
• Mounting hardware included
• Replaces Weber burn system kit #69455