Genuine Weber Hardware; set of four stainless steel sheet metal threaded mounting screws for the Burner Tube Forks and Grease Tray Rails on Weber Spirit 200 and 300 Series (2013-Current) and Spirit II grills.

What’s Included:

• (4) Stainless steel sheet metal threaded mounting screws for Weber Grills
• 1/2in. long, with 5/16in.(8mm) SAE slotted hex/washer head
• Genuine Weber Part.

Two Genuine Weber Stainless Steel Tube Burners and one Crossover Flame Tube set for Weber Spirit 200 Series model years 2013-Current with front mounted controls. Two 18in. left and right main Burners (The left side main burner tube features an attached igniter electrode mounting bracket), and one 10-1/2in. Gas/Flame Crossover Burner Tube with two attached drip shields. Weber stainless steel burners feature venturi's with built-in wire-mesh screen spider guards. Genuine Weber Part, replaces Weber Part 69785.

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our Weber® Stainless Steel Tube Burner Set. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel Weber® burners from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Fits Weber Spirit 200 series, model years 2013-present

Set Includes:

• (2) 18in. Stainless Steel Tube Weber Burners
• (1) 10-1/2in. Gas/Flame Crossover Burner Tube
• Installation instructions included.
• Genuine Weber Part.

One Stainless Steel 10-1/2in. Crossover Flame Tube Burner for Weber Spirit 200 and Spirit II 200 Series, model years 2013 and newer that feature two main burners. This is the smaller burner tube designed to transfer flame from main burner to second burner tube. This high quality aftermarket part replaces Weber OEM Part# 69899. Features two attached drip shields and a dual tab anti-rotate mounting bracket.

Fits these following Weber® gas grill models:

• Weber Spirit 200 series
• Spirit II 200 Series

What’s Included:

• (1) Genuine Weber Crossover Gas/Flame Burner Tube for Weber Spirit 200 and Spirit II 200 Series, model years 2013 and newer
• Features two attached drip shields and a dual tab anti-rotate mounting bracket.
• Highest quality aftermarket replacement
• Replaces Weber OEM Part# 69899

Two Stainless Steel Tube Burners and one Crossover Flame Tube set for Weber Spirit 200 Series model years 2013-Current with front mounted controls. Two 18in. left and right main Burners (The left side main burner tube features an attached igniter electrode mounting bracket), and one 10-1/2in. Gas/Flame Crossover Burner Tube with two attached drip shields. Weber stainless steel burners feature venturi's with built-in wire-mesh screen spider guards. These high quality aftermarket parts replace Weber OEM Parts 69785 and 68949.

Are you experiencing uneven heat in your Weber BBQ grill? Replace your burners with our high quality Stainless Steel Tube Burner Set for Weber® grills. Over time, your grill's original burners gas ports become blocked, cracked, or rusted, leading to uneven heat and reduced efficiency. Turn up the heat with a clean consistent flame by replacing old burners with a long lasting set of high quality stainless steel burners for your Weber® grill from Grillparts.com. Get even surface heat to your cooking grates, just like when your grill was new!

Fits these following Weber® gas grill models:

• Weber Spirit 200 series, model years 2013-present
• Replace Weber OEM Parts 69785 and 68949.

Set Includes:

• (2) 18in. Stainless Steel Tube Weber Burners
• (1) 10-1/2in. Gas/Flame Crossover Burner Tube
• Highest quality aftermarket replacement parts

Genuine Weber® Flavorizer Bars made in Porcelain Coated Steel. Set of three Weber Flavorizer Bars that fit Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present.

Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Genuine Weber Flavorizer Bars from Grillparts.com.

Fits these following Weber® gas grill model years 2013 and newer that have front-mounted controls:

• Weber Spirit 200 series (2013+)
• Spirit II 200 Series (2013+)

What’s Included:

• (3) 15-1/4in. Porcelain Coated Steel Weber Flavorizer Bars:
• 15-1/4in. x 3-1/2in.
• Fits Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present.
• Genuine Weber® Replacement Part

The highest quality Flavorizer Bars for Weber grills constructed of 430 grade Stainless Steel. Set of three Flavorizer Bars that fit Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present.

Our Stainless Steel Flavorizer Bars for Weber® grills are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Weber Flavorizer Bars from Grillparts.com.

Fits these following Weber® gas grill model years 2013 and newer that have front-mounted controls:

• Weber Spirit 200 series (2013+)
• Spirit II 200 Series (2013+)

What’s Included:

• (3) Stainless Steel Weber Flavorizer Bars:
• 15-1/4in. x 3-1/2in.
• Fits Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present.
• 430 grade Stainless Steel
• Highest quality aftermarket replacements

Genuine Weber Flavorizer Bars made in Stainless Steel. Set of three Weber Flavorizer Bars that fit Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present.

Weber Stainless Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Genuine Weber Flavorizer Bars from Grillparts.com.

Fits these following Weber® gas grill model years 2013 and newer that have front-mounted controls:

• Weber Spirit 200 series (2013+)
• Spirit II 200 Series (2013+)

What’s Included:

• (3) 15-1/4in. Stainless Steel Weber Flavorizer Bars:
• 15-1/4in. x 3-1/2in.
• Fits Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present.
• Genuine Weber Replacement Part

Genuine Weber® Cast Iron three piece set of Cooking Grates for Weber Spirit 200 Series and Spirit II 200 Series Model Years 2013 to present. These 3 piece grates are the grilling basis for the Weber® Gourmet Cooking System.  3 piece cast iron cooking grate set in porcelain enameled matte finish for easy clean up, with interchangeable round middle grate.

The Weber Cast Iron Gourmet BBQ System 3 piece Cooking Grate Set includes one left side, one right side and one 12in. diameter round removable center piece. Use all 3 pieces together for a traditional grilling grate surface, or remove the center piece to utilize any of Weber Gourmet BBQ System Accessories (sold separately).

Fits the following Weber® Models:

• Weber Spirit 200 Series And Spirit II 200 Series
• Model years 2013-Current

What’s Included:

• (1) Weber Cast Iron Cooking Grate 3pc. Set for the Gourmet BBQ System:
• Overall dimensions: 20-1/2in. x 17-1/2in.
• IMPORTANT: Please Verify Dimensions!
• Weber Gourmet BBQ System Accessories Sold Separately.
• Genuine Weber Part.

Gourmet BBQ System Accessories for Removable Grate Area (Sold Separately) Include:

• Cast Iron Griddle: Part# 7421
• Poultry Roaster: Part# 8838
• Searing Grate: Part# 8834
• BBQ Pizza Stone: Part# 8836

Genuine Weber® Standing Chrome Plated Raised Warming Rack provides extra lift to allow space to cook underneath. This Weber Standing Warming Rack fits Weber Spirit 200 Series grills, model years 2013 and newer, and is installed on the last two notches in your cookbox.

The Weber® Chrome Plated Raised Warming Rack, your grilling sidekick, literally elevating your barbecue game to new heights. It's not just a grilling rack offering more cooking area; it's a cozy retreat for your finished masterpieces, keeping them warm and toasty while you finish up the main event on the grill!

What’s Included:

• (1) Genuine Weber® Standing Chrome Plated Raised Warming Rack:
• Fits Weber Spirit 200 Series grills, model years 2013 and newer
• Grilling Area Surface: 18-1/2in. x 4-3/4in. 
• Mounting Pegs: Tip-to-tip width distance: 21-1/2in.
• Genuine Weber Part. Replaces Weber Part 7640.

Genuine Weber® Two piece cast iron cooking grate set for heat retention with porcelain enamel finish for easy clean up. Fits Weber Spirit 200 Series and Spirit II 200 Series grills, model years 2013 to present that have front-mounted controls.

Freshen up your grilling experience with new Genuine Weber® cast iron cooking grates! Replace your cooking grates where the meat greets the heat with these sleek, matte finish grates. The porcelain enamel finish is rust-resistant and easy to clean. these cast iron Weber® cooking grates from Grillparts.com spread heat for nice sear marks and are great for everyday grilling. 

Fits Weber Grills:

• Weber Spirit 200 Series
• Weber Spirit II 200 Series grills
• Model years 2013+ that have front-mounted controls.

What’s Included:

• (2) 10-1/4in. x 17-1/2in. Weber cast iron cooking grates:
• Total Coverage: 23-3/4in. x 17-1/2in.
• Please Verify Dimensions.
• Genuine Weber OEM part.

Genuine Weber® heavy duty, porcelain enameled cast iron griddle that fits all Weber Spirit and Spirit II, 200 and 300 Series model grills (2013 and newer). Features exceptional heat retention with an easy-to-clean porcelain enamel coating. Has a sloped cooking surface to drain drippings away from food and into the grease reservoir. 

With a Weber Porcelain Enameled Cast Iron Griddle, you can flip pancakes at sunrise, or crab cakes for dinner. Whether you’re filling the backyard with the sweet aroma of fruity crepes at dawn or grilling a seafood feast at dusk—make anytime your time to grill with a Cast Iron Griddle from Grillparts.com.

Fits the following Weber Grill Models:

• Weber Spirit II 200/300 (2 and 3 burner models)
• Weber Spirit 200/300 series (2 and 3 burner models)
• May fit some Weber Genesis Silver B C 1000-5000 models.

What’s Included:

• (1) Genuine Weber® heavy duty, porcelain enameled cast iron griddle for Weber Spirit 200/300 Series
• Overall dimensions, including mounting tabs, are 17-1/2in. x 12in. wide. 
• Cast-iron material retains and evenly distributes heat
• Gently sloped cooking surface helps to drain grease
• Made of cast iron that has a porcelain-enameled finish
• Genuine Weber Part.

Genuine Weber® set of two heavy duty, fixed, non-locking plastic caster wheels for Weber Spirit 200/300 Series, model years 2013-2017 and 2019.

Don't get caught flat-footed! Replace your Weber Grills Caster Wheels to get it level and moveable when grill portability is necessary. Replace any defunct casters with genuine heavy duty Weber BBQ caster wheels from Grillparts.com. 

What’s Included:

• (2) Genuine Weber Grills Non-Locking Caster Wheels with mounting plate hardware, and 8 screws:
• Fits Spirit 200/300 (2013-2017/ 2019)
• For Grills with Front-Mounted controls.
• High-grade plastic easily supports the weight of your grill
• Wheel turns unimpeded on axle inside curved housing
• Non-locking caster wheels
• Caster diameter: 2-7/8in.
• Mounting plate measures 2-3/8in.
• Instruction sheet included
• Genuine Weber Part.

Genuine Weber® set of two heavy duty, locking plastic caster wheels for Weber Spirit 200/300 Series, model years 2013-2017 and 2019.

Don't get caught flat-footed! Replace your Weber Grills Caster Wheels to get it level and moveable when grill portability is necessary. Once in place, prevent wayward movement with the built-in locking mechanism for supreme steadiness. Replace any defunct casters with genuine heavy duty Weber BBQ caster wheels from Grillparts.com. 

What’s Included:

• (2) Genuine Weber Grills Locking Caster Wheels with mounting plate hardware, and 8 screws:
• Fits Spirit 200/300 (2013-2017/ 2019)
• For Grills with Front-Mounted controls.
• High-grade plastic easily supports the weight of your grill
• Wheel turns unimpeded on axle inside curved housing
• Locking caster wheels to keep grill in place
• Caster diameter: 2-7/8in.
• Mounting plate measures 2-3/8in.
• Instruction sheet included
• Genuine Weber Part.

Set of two Genuine Weber® 2-1/2in. dia. Heat/Gas Control Knobs for the main burners on Spirit 200 Series grills manufactured in 2013 to present with up-front controls. Plastic heat control knobs feature a chrome finish cap with an embossed Weber® logo. The diameter of each knob measures 2-1/2in., and has a "D" shaped valve stem opening measures 1/4in. diameter for mounting.

Twist your way back to BBQ magic with a set of new Weber Heat/Gas Control Knobs for the main burners on your Spirit 200 Series grill from Grillparts.com. Replace your broken, worn or lost Weber® Control Knobs with these exact Weber genuine replacements.

What’s Included:

• (2) Genuine Weber® Heat/Gas Control Knobs for the main burners:
• 2-1/2in. dia. Dark Gray Plastic Knobs with Chrome decorative caps.
• Fits Weber Spirit 200 Series grills 2013 to present
• For Grills with Front-Mounted controls.
• Genuine Weber Part.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

• 1 On/Off Ball Valve Quick Connect Fitting
• Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 3/8" Gas Line Quick Connect Fitting

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

Complete, Genuine Weber Gas Control Valve Manifold Assembly for Weber Spirit 210 Series (2013 to present model years) that utilize Propane (LP) Gas. Complete propane (LP) manifold assembly includes the two main burner valves with propane sized orifices, one male threaded end fitting for the main gas supply line, mounting hardware and installation instructions.

Are your Weber Burner Gas Control Valves sticky, leaky or malfunctioning? Replace yours and accurately regulate the flow of fuel to your burners. Keep the flames dancing just right with a new, genuine Weber gas control valve assembly from Grillparts.com.

What’s Included:

• (1) Complete Gas/Heat Control Valve Assembly for Weber Spirit 210 Series:
• Fits 2013 to present model years
• For use with propane models only
• Dimensions: 14-1/2in. length
• (2) main burner gas control valves with propane orifices
• Two attached mounting brackets
• Mounting hardware & installation sheet included
• Genuine Weber Part. 
• IMPORTANT: If this manifold assembly is used to convert fuel type, from Natural Gas (NG) to Propane (LP), all Weber warranties on your grill will be voided.

Complete, Genuine Weber Gas Control Valve Manifold Assembly for Weber Spirit 210 Series (2013 to present model years) that utilize Natural Gas. Complete manifold assembly includes the two main burner valves with Natural Gas sized orifices, one male threaded end fitting for the main gas supply line, mounting hardware and installation instructions.

Are your Weber Burner Gas Control Valves sticky, leaky or malfunctioning? Replace yours and accurately regulate the flow of fuel to your burners. Keep the flames dancing just right with a new, genuine Weber gas control valve assembly from Grillparts.com.

What’s Included:

• (1) Complete Gas Control Valve Assembly for Weber Spirit 210 Series:
• Fits 2013 to present model years
• For use with Natural Gas models only
• Dimensions: 14-1/2in. length
• Two main burner gas control valves with Natural Gas orifices
• Two attached mounting brackets
• Mounting hardware & installation sheet included
• Genuine Weber Part. 
• IMPORTANT: If this manifold assembly is used to convert fuel type, from Propane (LP) to Natural Gas (NG), all Weber warranties on your grill will be voided.

Complete, Genuine Weber Gas Control Valve Manifold Assembly for Weber Spirit 220 Series (2013 to present model years) that utilize Propane (LP) Gas and side burner. Complete propane (LP) manifold assembly includes the two main burner valves with propane sized orifices, two male threaded end fittings; one for the main gas supply line and one for the side burner gas supply line, mounting hardware and installation instructions.

Are your Weber Burner Gas Control Valves sticky, leaky or malfunctioning? Replace yours and accurately regulate the flow of fuel to your burners. Keep the flames dancing just right with a new, genuine Weber gas control valve assembly from Grillparts.com.

What’s Included:

• (1) Complete Gas Control Valve Assembly for Weber Spirit 220 Series:
• Fits 2013 to present model years
• For use with propane models only with side burner
• Dimensions: 15-1/2in. length
• Two main burner gas control valves with propane orifices
• Two attached mounting brackets
• Mounting hardware & installation sheet included
• Genuine Weber Part. 
• IMPORTANT: If this manifold assembly is used to convert fuel type, from Natural Gas (NG) to Propane (LP), all Weber warranties on your grill will be voided.

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

• (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

Single replacement Weber Heat/Gas Control Valve for Spirit 200 and 300 Series, model years 2013 to present with front mounted controls that utilize Propane (LP) Gas. Weber Gas Control Valve includes Propane specified orifice, rubber manifold seal and mounting bracket with necessary mounting hardware.

IMPORTANT: This valve mounts to the manifold rail with a two screw clamp; can also replace the single screw clamp version.

Are your Weber Burner Gas Control Valves sticky, leaky or malfunctioning? Replace yours and accurately regulate the flow of fuel to your burners. Keep the flames dancing just right with a new, genuine Weber gas control valve from Grillparts.com.

What’s Included:

• (1) Gas Control Valve with Propane Orifice for Weber Spirit 200 and 300 Series:
• For grills that utilize Propane (LP) Gas
• Fits 2013 to present model years
• Mounting bracket included
• Mounting hardware included

Single replacement Weber Heat/Gas Control Valve for Spirit 200 and 300 Series, model years 2013 to present with front mounted controls that utilize Natural Gas (NG). Weber Gas Control Valve includes Natural Gas specified orifice, rubber manifold seal and mounting bracket with necessary mounting hardware.

IMPORTANT: This valve mounts to the manifold rail with a two screw clamp; can also replace the single screw clamp version.

Are your Weber Burner Gas Control Valves sticky, leaky or malfunctioning? Replace yours and accurately regulate the flow of fuel to your burners. Keep the flames dancing just right with a new, genuine Weber gas control valve from Grillparts.com.

What’s Included:

• (1) Gas Control Valve with Natural Gas Orifice for Weber Spirit 200 and 300 Series:
• For grills that utilize Natural Gas
• Fits 2013 to present model years
• Mounting bracket included
• Mounting hardware included

Weber Two Output Electronic Ignition Module for Weber® Spirit 210, Spirit 310 Series Models manufactured in 2013 and newer with Electronic Ignition. Utilizes one AA Battery (not included). Features a battery cap, two color coded male spade output terminals for the electrode and two male spade input terminals for the push button switch.  Mounting hardware and installation instructions included. 

Why a new electronic ignition module for your Weber grill? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your Weber 2 Output Port Electronic Ignition Module and light your way to a better grilling experience!

Fits Weber® Spirit 210 and Weber® Spirit 310 Series Models with Electronic Ignition manufactured in 2013 and afterwards.

What’s Included:

• (1) Weber Push Button Start Electronic Ignition Module with 2 Outputs for 2013 and newer Weber Spirit 210 and Spirit 310 models.
• Mounting hardware and installation instructions included.
• Genuine Weber Part. 

Genuine Weber Four Output Electronic Ignition Module for Weber® Spirit 220, 320, and 330 Series Models with Side Burners featuring Electronic Ignition, manufactured in 2013 and afterwards. Utilizes one AA Battery (not included). Features a battery cap, 4 color coded male spade output terminals (for the electrodes and ground wires) and 2 male spade input terminals for the push button switch wires.  Mounting hardware and installation instructions included.

Why a new electronic ignition module for your Weber grill? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your Weber 4 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

• (1) Weber Push Button Start Electronic Ignition Module with 4 Outputs for 2013 and newer Weber Spirit 220, 320, and 330 models.
• Mounting hardware and installation instructions included.
• Genuine Weber Part.

Genuine Weber Complete Electronic Ignition Rebuild Kit for Weber Spirit 220 and 320 Series with front mount controls that feature a Side Burner, manufactured from 2013 to 2017. Replaces Weber Part 7643, which is no longer available.

Weber Electronic Ignition Complete Rebuild Kit for Spirit 220 and 320:

• (1) Four output ignition module with battery cap
• (1) AA Battery
• (1) Main burner electrode with color coded wires,
• (1) Side burner electrodes with color coded wires.
• (1) Push button switch with wires
• (1) Grounding wire
• Mounting Hardware
• Installation instructions.
• Genuine Weber Part.

Completely rebuild your Weber Spirit Ignition/Lighting System with this all-in-one Genuine Weber kit from Grillparts.com. Let’s explain Why; You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules, wiring and buttons decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules and components have a finite lifespan. Replace your Weber Spirit grills ignition system with this complete kit and light your way to a better grilling experience!

What’s Included:

• (1) Complete Electronic Ignition Rebuild Kit for Weber Spirit 220 and 320 grills
• For models with a Side Burner
• Weber Spirit Grills manufactured from 2013-2017

Genuine Weber Complete Electronic Ignition Rebuild Kit for Weber Spirit 210 and 310 Series with front mount controls, without a side burner, manufactured from 2013 to present.

Weber Electronic Ignition Complete Rebuild Kit for Spirit 210 and 310:

• (1) Two output ignition module with battery cap
• (1) AA Battery
• (1) Main burner electrode and collector box with color coded wires
• (1) Push button switch with wires
• (1) Grounding wire
• Mounting Hardware
• Installation instructions.
• Genuine Weber Part.

Completely rebuild your Weber Spirit Ignition/Lighting System with this all-in-one Genuine Weber kit from Grillparts.com. Let’s explain Why; You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules, wiring and buttons decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules and components have a finite lifespan. Replace your Weber Spirit grills ignition system with this complete kit and light your way to a better grilling experience!

What’s Included:

• (1) Complete Electronic Ignition Rebuild Kit for Weber Spirit 210 and 310 grills
• For models that do not have a Side Burner
• Spirit Grills manufactured from 2013 and newer

High quality replacement Igniter Push Button Switch for Weber Spirit 200 and 300 series, model years 2013 and newer that feature electronic ignition. Features a soft rubber top push button switch with snap in place mounting tabs and two 23in. long insulated wires with flat female spade connector ends. Quality Aftermarket Part.  Replaces Weber Part 69871.

What’s Included:

• (1) Igniter Push Button Switch for Weber Spirit 200 and 300 series:
• Model Years 2013-Current
• Soft rubber top push button
• Snap in place mounting tabs
• Two 23in. long insulated wires with flat female spade connector ends
• Replaces Weber Part 69871
• Installation instructions included. 

Genuine Weber gas grill lid temperature gauge, indicator-thermometer with a 1-13/16in. dial face; measures internal grill temperatures from 150°F to 600°F/50°C to 350°C degrees. Temperature probe diameter is 1/4in. extends 1-1/2in. into grill hood body. Includes mounting wing nut.

Weber Temperature Gauge fits many Weber gas and charcoal grill models, including:

• Weber Spirit 2013 and 2014
• Weber Q
• Weber Genesis
• Weber Charcoal Kettles
• Replaces Weber Part # 7581, 60392 and 91384

Measurements:

• Diameter of thermometer dial face: 1-13/16in.
• Probe Length: 1-1/2in.

What’s Included:

• (1) Genuine Weber gas grill temperature gauge/indicator/thermometer (1-13/16in. dial face)
• (1) Mounting wing nut.
• Genuine Weber Part.
• Does not include decorative bezel.

Genuine Weber® Grills easy to clean, disposable aluminum foil disposable grease drip pan liners. Perfect-fit 8-1/2in. x 6in. Liners, 10 per package.

A simple disposable drip pan liner will save you from greasy maintenance. Line the drip tray of your grill and make the disposal of grease easy and clean!

Fitment:

• Compatible with Weber Q, Pulse, Lumin, Weber Traveler, Spirit, Spirit II, 2022 Genesis 300/400, Genesis II 200/300, Genesis.

What’s Included:

• (10) Weber Aluminum Foil Grease Tray Liners (8-1/2in. x 6in.)

Genuine Weber Rotisserie Motor for Weber Gas Grills with a rotisserie including Weber Summit series rotisseries. Rotisserie motor is 120V, and spins at 2.5-3.0 RPM, and has a 20lb. load weight limit.

Genuine Weber Replacement Rotisserie Motor for Weber Gas Grills features a black plastic casing with a stainless steel backing plate, a weather resistant On/Off switch, 34in. long cord/plug and installation instructions.

Looking for a Complete Rotisserie Kit for your grill? Try our Universal Grill Deluxe Electric Rotisserie Kit 

What’s Included:

• (1) Genuine Weber Replacement Rotisserie Motor for Weber Gas Grills:
• 120V electric motor, 2.5-3.0 RPM, 20lb weight limit
• Black plastic casing with a stainless steel backing plate
• Weather resistant On/Off switch
• 34in. cord with plug
• Installation instructions.
• Genuine Weber Part.

Does Not Fit: 

• Does not fit/replace Weber Charcoal Kettle rotisseries.
• Does not replace Ducane grill brand rotisserie motors.
   

Genuine Weber Hardware; set of four stainless steel sheet metal threaded mounting screws for the Burner Tube Forks and Grease Tray Rails on Weber Spirit 200 and 300 Series (2013-Current) and Spirit II grills.

What’s Included:

• (4) Stainless steel sheet metal threaded mounting screws for Weber Grills
• 1/2in. long, with 5/16in.(8mm) SAE slotted hex/washer head
• Genuine Weber Part.

Genuine Weber Complete Rotisserie Kit features a heavy duty motor turns and supports up to 10 lbs. of meat. Features stainless steel dishwasher safe forks, spit rod, handle and mounting hardware. The forks are designed to hold both large and smaller cuts of meat and they are dishwasher safe.

Fits the following Weber 2 and 3 burner grills:

• Weber Spirit II 200/300 Series (2018 and Newer)
• Weber Spirit 200/300 Series (2013 thru 2017)
• Weber Spirit 500/700
• Genuine Weber Part

Turn your grill into a backyard rotisserie with a complete genuine Weber Rotisserie Kit. Slow-roast a crispy yet moist whole chicken to tender ribs. The Rotisserie gently rotates food above the cooking grate, producing succulent, self-basted meat directly from your backyard kitchen.

What's Included:

• (1) Complete Rotisserie Kit - for Weber Spirit Grills
• Forks designed to hold both large and small cuts of meat
• Heavy-duty motor supports up to 10 lbs.
• Includes stainless-steel shaft, forks, handle, and hardware 

The Weber Grill’n Go Handle Mount LED Flash Light with built-in motion sensor fits a large variety of Weber Gas Grills, and can be easily mounted, then removed for a portable flash light.

The Weber Grill’n Go BBQ LED light is a multifunctional grill light that easily attaches to the grill handle, and also detaches for extra light where you need it. Its motion sensor turns on when the lid is lifted and turns off once closed to save battery life, and added ease while grilling.

• LED illuminates the entire cooking surface
• On/off motion sensor saves battery life
• Can be detached and used as a flashlight
• Easily attaches to the grill handle

Fits "round handles" on the following Weber Grills:

• Weber Spirit (2007 and newer)
• Weber Genesis (2007 and newer)
• Weber Summit (2007 and newer)
• All Weber Spirit II
• All Weber Genesis II

What's Included:

• (1) Weber Grill’n Go BBQ LED Light kit
• LED Light (which can be removed from the mounting collar and used as a flashlight)
• Grill Handle Light Mounting Collar
• Three "AAA" batteries and mounting/use instructions.
• Genuine Weber Part.

Genuine Weber Aluminum Grease Catch Pan and One Single Disposable Foil Liner. Fits Weber Spirit (2009 and newer), most Weber Genesis, Genesis II (2016+), Spirit, Summit Silver/Gold/Platinum and Summit 400/600 (prior to 2000) gas grills.

IMPORTANT: Please verify Catch Pan dimensions:
Pan measures 8-5/8in. x 6-1/8in. wide (width measurement includes the folded side rail extension).

Fits the following Weber Gas Grills:

• Weber Genesis
• Genesis II 2 and 3 Burner Models (2016+)
• Spirit (2009 and newer)
• Summit Silver/Gold/Platinum
• Summit 400/600 (prior to 2000)

What's Included:

• (1) Weber Grills Aluminum Grease Catch Pan With Foil Liner, 8-5/8in. x 6-1/8in.
• (1) Disposable Foil Liner
• Foil liners available in a pack of 10, Part# 6415.
• Genuine Weber Part
• Please verify dimensions

Genuine Weber® Cast Iron three piece set of Cooking Grates for Weber Spirit 200 Series and Spirit II 200 Series Model Years 2013 to present. These 3 piece grates are the grilling basis for the Weber® Gourmet Cooking System.  3 piece cast iron cooking grate set in porcelain enameled matte finish for easy clean up, with interchangeable round middle grate.

The Weber Cast Iron Gourmet BBQ System 3 piece Cooking Grate Set includes one left side, one right side and one 12in. diameter round removable center piece. Use all 3 pieces together for a traditional grilling grate surface, or remove the center piece to utilize any of Weber Gourmet BBQ System Accessories (sold separately).

Fits the following Weber® Models:

• Weber Spirit 200 Series And Spirit II 200 Series
• Model years 2013-Current

What’s Included:

• (1) Weber Cast Iron Cooking Grate 3pc. Set for the Gourmet BBQ System:
• Overall dimensions: 20-1/2in. x 17-1/2in.
• IMPORTANT: Please Verify Dimensions!
• Weber Gourmet BBQ System Accessories Sold Separately.
• Genuine Weber Part.

Gourmet BBQ System Accessories for Removable Grate Area (Sold Separately) Include:

• Cast Iron Griddle: Part# 7421
• Poultry Roaster: Part# 8838
• Searing Grate: Part# 8834
• BBQ Pizza Stone: Part# 8836

Genuine Weber® Cast Iron Griddle. Weighing in at 8lbs., this 12in. diameter heavy duty, cast iron griddle will definitely hold some heat, and clean up easily thanks to its porcelain enamel finish and non-stick properties. Logo embossed handles and aesthetic design makes for great food presentations. Genuine Weber® Gourmet BBQ System Accessory, but can be used on top of any grill grate.

Can be used as an insert: Part of the Weber Gourmet BBQ System. Use with hinged adaptable cooking grates such as: 7420, 8835, 7585, 7586, 7587, 64812 and 64815 (sold separately).

• Heavy Duty Cast Iron
• Retains heat and delivers professional searing
• Porcelain enamel finish prevents sticking and allows for easy clean up
• Great for searing-Seals in moisture and flavor
• Perfect fit for Weber Gourmet BBQ System Hinged Cooking Grates

Other Gourmet BBQ System Accessories (Sold Separately):

Cast Iron Griddle: Part# 7421

Poultry Roaster: Part# 8838

Searing Grate: Part# 8834

BBQ Pizza Stone: Part# 8836

Genuine WEBER 12in. Diameter Cast Iron Sear Grate. Cast-iron grate evenly conducts heat, creating professional sear marks while sealing in the moisture and flavor of your food. The porcelain-enameled
finish prevents sticking and allows for easy clean-up.

Become the grill master you've always strived to be by perfecting the art and science of a flawlessly seared meat with a Weber Cast Iron Sear Grate. Luckily for you, and your guests, becoming that backyard hero has never been easier with the Gourmet BBQ System Searing Grate. Your guests will be impressed at first glance, and through the very last bite.

What’s Included:

• (1) Weber Cast Iron Sear Grate, part of the Weber Gourmet BBQ System:
• Dimensions - 1/2in. x 12in. x 12in.
• Seals in moisture and flavor
• Porcelain enamel finish prevents sticking and allows for easy clean up
• For use with The Gourmet BBQ System Hinged Cooking Grate
• Fits Weber Gourmet BBQ System Hinged Grates 12in. Center Grate: (7420, 8835, 7585, 7586, 7587, 64812 and 64815 sold separately).

Other Gourmet BBQ System Accessories (Sold Separately):

Cast Iron Griddle: Part# 7421

Poultry Roaster: Part# 8838

Searing Grate: Part# 8834

BBQ Pizza Stone: Part# 8836

Genuine Weber 13-3/8in. moisture absorbing cordierite BBQ grill pizza stone with an included chrome carry rack. Logo embossed handles and aesthetic design makes for great food presentations. For use on top of any grill grate.

The Pizza Stone is crafted with cordierite stone, which gets extremely hot in a hurry to create light and crispy, thin pizza crusts. Roll out your favorite dough, add the perfect toppings, and see what it’s like to bake brick-oven pizza in the comfort of your backyard. When you’re finished cooking, use the handy metal carry rack to quickly and easily transport your piping hot pizza and pizza stone from grill to table.

Can be used as an insert: Part of the Weber Gourmet BBQ System. Use with hinged adaptable cooking grates such as: 7420, 8835, 7585, 7586, 7587, 64812 and 64815 (sold separately).

• Cordierite stone absorbs moisture for light and crispy thin crust pizza
• Carry rack makes transporting the pizza quick and easy
• Fits into the Gourmet BBQ System cooking grate so that it stays in place while grilling
• Enjoy the taste of a crispy pizza with perfectly melted cheese and grilled toppings

Other Gourmet BBQ System Accessories (Sold Separately):

Cast Iron Griddle: Part# 7421

Poultry Roaster: Part# 8838

Searing Grate: Part# 8834

BBQ Pizza Stone: Part# 8836

Weber® 2-in-1 Stainless Steel 13in. Poultry Roaster and Grilling Tray. Features a removable poultry insert in the middle that allows you to use your favorite liquids for roasting that holds 12oz. Genuine Weber® Gourmet BBQ System Accessory, and can be used on top of any grill grate.

Not your run-of-the-mill poultry roaster! The versatile, 2-in-1 design of the Poultry Roaster/Grilling tray empowers you to grill your bird and sides at the same time. Prepare a crispy yet moist chicken in the center, while vegetables simmer around the rim. Fill the center liquid container to make a succulent beer-can chicken, or remove it to use the entire pan for vegetables or sides.

What’s Included:

• (1) Weber® 2-in-1 Stainless Steel 13in. Poultry Roaster/Grilling Tray:
• Removable 12oz. liquid container
• For use on ANY grill.
• Fits Weber Gourmet BBQ System Hinged Grates 12in. Center Grate: (7420, 8835, 7585, 7586, 7587, 64812 and 64815 sold separately).

Other Gourmet BBQ System Accessories (Sold Separately):

Cast Iron Griddle: Part# 7421

Poultry Roaster: Part# 8838

Searing Grate: Part# 8834

BBQ Pizza Stone: Part# 8836