T-Shaped Ignitor Collector Box and Electrode - 5-5/16in. x 3-1/2in.

Burner Components Burner Flame Crossover Channels Burner Shields Cooking Grids Grill Exterior Ignitor Components Regulators and Hoses

grill parts: T-Shaped Ignitor Collector Box and Electrode - 5-5/16in. x 3-1/2in.

Brinkmann grill parts: T-Shaped Ignitor Collector Box and Electrode - 5-5/16in. x 3-1/2in. (image #1)

Brinkmann grill parts: T-Shaped Ignitor Collector Box and Electrode - 5-5/16in. x 3-1/2in. (image #2)

Brinkmann grill parts: T-Shaped Ignitor Collector Box and Electrode - 5-5/16in. x 3-1/2in. (image #3)

Brinkmann grill parts: T-Shaped Ignitor Collector Box and Electrode - 5-5/16in. x 3-1/2in. (image #4)

Brinkmann grill parts: T-Shaped Ignitor Collector Box and Electrode - 5-5/16in. x 3-1/2in. (image #5)

T-Shaped Ignitor Collector Box and Electrode - 5-5/16in. x 3-1/2in.

Item# IG-23

IN STOCK BUT SELLING FAST

$9.75

Stainless steel ignitor spark box with electrode and wire for Brinkmann, Sams Club, Home Depot and Charmglow gas grills. Mounts between burners and ignites the gas as it flows through the burner tube.

IG-23B Ignition collector box with probe and wire
Measures 5-5/16" across the box and stands out approximately 3-1/2".
Genuine MHP upgrade replacement part.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

Qty:

Frequently Bought With This Part

Grill Replacement Parts: 4-7/8" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-8415-4)

4-7/8" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-8415-4)

Grill Replacement Parts: 5-1/8" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-9422-6)

5-1/8" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-9422-6)

Grill Replacement Parts: Stainless Burner Bracket Support With Crossovers - 35-3/4in. - (6 Burner Models)

Stainless Burner Bracket Support With Crossovers - 35-3/4in. - (6 Burner Models)

Grill Replacement Parts: 20" Igniter Wire, With 2 Female Flat Spade Connector Ends

20" Igniter Wire, With 2 Female Flat Spade Connector Ends

Grill Replacement Parts: Igniter Wire - 20in. (Female Spade to Female Round Termination)

Igniter Wire - 20in. (Female Spade to Female Round Termination)

Burner Components | Brinkmann

Parts for Brinkmann Grills: 14-1/2" Brinkmann Stainless Steel Tube Burner (Replaces Brinkmann OEM Part 154-9210-0)

14-1/2" Brinkmann Stainless Steel Tube Burner (Replaces Brinkmann OEM Part 154-9210-0)

Item# BMTB1

Stainless steel 14-1/2" straight tube burner. Mounting tab is bent at a 45 degree angle and has the mounting hole centered on the tab. Measures 14-1/2" end to end including tab. Replaces Brinkmann OEM Part 154-9210-0.

In Stock

$23.10

Add

Parts for Brinkmann Grills: 14-1/4" Brinkmann Stainless Steel Tube Burner (Replaces Brinkmann OEM Part 154-4415-4)

14-1/4" Brinkmann Stainless Steel Tube Burner (Replaces Brinkmann OEM Part 154-4415-4)

Item# BMTB2

Stainless steel 14-1/4" straight tube burner. Mounting tab is flat and has the mounting hole offset on the tab. Measures 14-1/4" end to end including tab. Replaces Brinkmann OEM Part 154-4415-4.

In Stock

$23.10

Add

Parts for Brinkmann Grills: 15-3/8" Brinkmann Stainless Steel Tube Burner (Replaces Brinkmann OEM Part 154-9520-0)

15-3/8" Brinkmann Stainless Steel Tube Burner (Replaces Brinkmann OEM Part 154-9520-0)

Item# BMTB3

Stainless steel 15-3/8" straight tube burner. Mounting tab is flat and has the mounting hole offset on the tab. Measures 15-3/8" end to end including tab.

In Stock

$23.10

Add

Parts for Brinkmann Grills: 15-3/8" Stainless Steel Tube Burner (Replaces Brinkmann OEM Part 154-4220-1)

15-3/8" Stainless Steel Tube Burner (Replaces Brinkmann OEM Part 154-4220-1)

Item# BMTB4

15-3/8" long stainless steel burner tube. Fits many Brinkmann and Nexgrill models. Features an air mixture adjustment shutter with insect screen on the valve end, an offset mounting hole on the back end and an attached electrode mounting bracket.

In Stock

$21.37

Add

Parts for Brinkmann Grills: 17-3/4" X 5-3/8" Center Feed "U" Burner For Brinkman/Charmglow (Replaces Brinkmann OEM Part 154-8750-0)

17-3/4" X 5-3/8" Center Feed "U" Burner For Brinkman/Charmglow (Replaces Brinkmann OEM Part 154-8750-0)

Item# BMU1

Stainless steel center feed "U" shaped burner. Measures 17-3/4" X 5-3/8". The overall tip to tip length including the mounting tab is 18-3/4". Features an adjustable air mixture shutter with insect screen on the valve end and a forked...

In Stock

$47.99

Add

Parts for Brinkmann Grills: 13-1/2" Cast Iron Burner (Replaces Brinkmann OEM Part 154-4775-5)

13-1/2" Cast Iron Burner (Replaces Brinkmann OEM Part 154-4775-5)

Item# CIBM

13-1/2" long cast iron bar burner (length measurement is total, "tip to tip"). The width measured across the top of the burner is 2-1/4". The venturi pipe extends 3-1/8" from the main burner body and has a...

In Stock

$19.53

Add

Parts for Brinkmann Grills: 12-3/4" Cast Iron Burner (Replaces Brinkmann OEM Part 154-2550-0)

12-3/4" Cast Iron Burner (Replaces Brinkmann OEM Part 154-2550-0)

Item# CIKR

12-3/4" long cast iron bar burner (length measurement is total, "tip to tip"). The width measured across the top of the burner is 2-1/8". The venturi pipe extends 3-3/4" from the main burner body and has a...

In Stock

$20.25

Add

Parts for Brinkmann Grills: 16-1/4" Cast Iron Burner (Replaces Brinkmann OEM Part 154-2300-5)

16-1/4" Cast Iron Burner (Replaces Brinkmann OEM Part 154-2300-5)

Item# CIT-L

Straight "rail" style cast iron burner. Dimensions are 2-3/8" across the top X 16-1/4" long. (Length measurement is total length tip to tip.)

In Stock

Retail: $31.40

$23.75

Add

Parts for Brinkmann Grills: 16-1/4" Stainless Steel Tube Burner

16-1/4" Stainless Steel Tube Burner

Item# CTB2

Stainless steel straight tube burner. Mounting tab is flat and has the mounting hole offset to the right side of the tab. Measures 16-1/4" end to end.

In Stock

$24.39

Add

Parts for Brinkmann Grills: 15-7/8" Stainless Steel Tube Burner

15-7/8" Stainless Steel Tube Burner

Item# CTB3

Stainless steel straight tube burner. Mounting tab is flat and has the mounting hole offset to the right side of the tab. Measures 15-7/8" end to end.

In Stock

$24.39

Add

Parts for Brinkmann Grills: U-Tube Burner - Stainless Steel -19-3/8 x 6in. - (Replaces DCS Part 210617P)

U-Tube Burner - Stainless Steel -19-3/8 x 6in. - (Replaces DCS Part 210617P)

Item# DCSU1

DCS Heavy duty stainless steel center feed U-shaped tube burner for Dynamic Cooking Systems grills. Measures 19-3/8in. total length front to back including the center tube and is 6in. wide. Fits a variety of DCS models and also some Charmglow...

In Stock

Retail: $145.10

$105.99

Add

Burner Flame Crossover Channels | Brinkmann

Parts for Brinkmann Grills: 5" Burner Ignition Crossover Channel With "Angled" Mounting Tabs (Replaces Brinkmann OEM Part 600-9410-8)

5" Burner Ignition Crossover Channel With "Angled" Mounting Tabs (Replaces Brinkmann OEM Part 600-9410-8)

Item# BM-CO1

Stainless steel crossover ignition channel with "angled" mounting tabs. The crossover channel mounts at the end of the the burners. Please note: These crossovers have tabs that are at a 90 degree angle. The channel length between the burners is...

In Stock

Retail: $11.00

$8.41

Add

Parts for Brinkmann Grills: 6-1/2" Burner Ignition Crossover Channel With "Angled" Mounting Tabs (Replaces Brinkmann OEM Part 600-9210-8)

6-1/2" Burner Ignition Crossover Channel With "Angled" Mounting Tabs (Replaces Brinkmann OEM Part 600-9210-8)

Item# BM-CO2

Stainless steel crossover burner ignition channel with "angled" mounting tabs. The crossover channel mounts at the end of the the burners. Please note: These crossovers have tabs that are at a 90 degree angle. The channel length between the burners...

In Stock

Retail: $11.00

$8.41

Add

Parts for Brinkmann Grills: 5-7/8" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-9590-6)

5-7/8" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-9590-6)

Item# BM-CO3

Stainless steel crossover burner ignition channel. The crossover channel mounts at the end of the the burners and has "flat" mounting tabs. The channel length which fits between the burners is 5-7/8".

In Stock

Retail: $14.10

$8.40

Add

Parts for Brinkmann Grills: 4-7/8" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-8415-4)

4-7/8" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-8415-4)

Item# BM-CO4

Stainless steel crossover burner ignition channel with "flat" mounting tabs. The crossover channel mounts at the end of the the burners and carries flame to the adjacent burner for ignition. The channel length, which fits between the burners, is...

In Stock

Retail: $11.00

$8.41

Add

Parts for Brinkmann Grills: 9-1/4" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-9200-3)

9-1/4" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-9200-3)

Item# BM-CO5

Stainless steel crossover burner ignition channel. The crossover channel mounts at the end of the the burners and has "flat" mounting tabs. The channel length which fits between the burners is 9-1/4".

In Stock

Retail: $11.00

$8.41

Add

Parts for Brinkmann Grills: 7-3/4" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-8445-3)

7-3/4" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-8445-3)

Item# BM-CO6

Stainless steel crossover burner ignition channel. The crossover channel mounts at the end of the the burners and has "flat" mounting tabs. The channel length which fits between the burners is 7-3/4".

In Stock

Retail: $12.00

$8.87

Add

Parts for Brinkmann Grills: 4-3/8" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-1750-4)

4-3/8" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-1750-4)

Item# BM-CO7

Stainless steel crossover burner ignition channel. The crossover channel mounts at the end of the the burners and has "flat" mounting tabs. The channel length which fits between the burners is 4-3/8".

In Stock

Retail: $12.00

$8.87

Add

Parts for Brinkmann Grills: 5-1/8" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-9422-6)

5-1/8" Burner Ignition Crossover Channel With "Flat" Mounting Tabs (Replaces Brinkmann OEM Part 600-9422-6)

Item# BM-CO8

Stainless steel crossover burner ignition channel with "flat" mounting tabs. The crossover channel mounts at the end of the the burners and carries flame to the adjacent burner for ignition. The channel length, which fits between the burners, is...

In Stock

Retail: $11.00

$8.41

Add

Parts for Brinkmann Grills: 7-1/4" Burner Ignition Crossover Channel With "Flat" Mounting Tabs

7-1/4" Burner Ignition Crossover Channel With "Flat" Mounting Tabs

Item# BM-CO9

Stainless steel crossover burner ignition channel. The crossover channel mounts at the end of the burners and has "flat" mounting tabs. The channel length which fits between the burners is 7-1/4".

In Stock

Retail: $12.00

$8.87

Add

Parts for Brinkmann Grills: 24" Burner Bracket With Crossovers, 4 Burner Models (Replaces Brinkmann OEM Part 600-2623-0)

24" Burner Bracket With Crossovers, 4 Burner Models (Replaces Brinkmann OEM Part 600-2623-0)

Item# BMBR1

24" stainless steel burner support bracket with crossover channels, for cast iron burners. Fits Brinkmann 4 burner models 810-2600-1, 810-2610-0, 810-2610-1, 810-2630-0. Used with 12-7/8" CIKR burners, shown for reference only. Mounting screws not...

In Stock

$28.80

Add

Parts for Brinkmann Grills: 25-1/8" Burner Bracket With Crossovers, 4 Burner Models (Replaces Brinkmann OEM Part 600-4415-6)

25-1/8" Burner Bracket With Crossovers, 4 Burner Models (Replaces Brinkmann OEM Part 600-4415-6)

Item# BMBR2

25-1/8" long stainless steel burner support bracket, for stainless steel tube burners. Fits Brinkmann Pro Series 4415 4-burner models 810-4415-4, 810-4415-E, 810-4415-T. The three carryover channels that go between the burners measure 4-7/8" each....

In Stock

$40.11

Add

Parts for Brinkmann Grills: Burner Ignition Crossover Channel - Flat Mounting Tabs - 5-1/8in. (Brinkmann, Charmglow, Browning)

Burner Ignition Crossover Channel - Flat Mounting Tabs - 5-1/8in. (Brinkmann, Charmglow, Browning)

Item# 09423

Stainless steel crossover burner ignition channel with flat mounting tabs. The crossover channel mounts at the end of the the burners and carries flame to the adjacent burner for ignition. The channel length, which fits between the burners, is...

In Stock

$9.31

Add

Parts for Brinkmann Grills: Stainless Burner Bracket Support With Crossovers - 35-3/4in. - (6 Burner Models)

Stainless Burner Bracket Support With Crossovers - 35-3/4in. - (6 Burner Models)

Item# BMBR4

Sams Club Members Mark and Brinkmann 35-3/4" stainless steel burner support rail with integrated crossover channels, for cast iron burners. For 6 burner grill models Mounting screws NOT included. Replaces Brinkmann OEM Part...

In Stock

$42.44

Add

Burner Shields | Brinkmann

Parts for Brinkmann Grills: 17-3/8" x 4" Porcelain Coated Heat Plate

17-3/8" x 4" Porcelain Coated Heat Plate

Item# 94281

17-3/8" x 4" porcelain coated steel heat plate. Shallow tent design, stands 7/8" tall at the peak of the tent. Features 2 slotted mounting holes at one end and one at the other. Fits a variety of Brinkmann and many other Brands/Models.

In Stock

$14.56

Add

Parts for Brinkmann Grills: 18-3/4" X 10-1/8" Burner Heat Distribution Shield

18-3/4" X 10-1/8" Burner Heat Distribution Shield

Item# 99051

Black porcelain coated heat distribution plate. Measures 18-3/4" front to back X 10-1/8" wide. (Sold by each, more than one may be required.)

In Stock

$27.07

Add

Parts for Brinkmann Grills: Burner Heat Distribution Burner Shield - 16-3/4in X 4in - (Charmglow, Brinkmann)

Burner Heat Distribution Burner Shield - 16-3/4in X 4in - (Charmglow, Brinkmann)

Item# BMHP1

Made in USA, high quality heavy gauge 430 stainless steel, tent shaped burner shield. Measures 16-3/4" long X 4" wide (measured across the bottom). Features slotted punched holes and cut-outs on both ends. IMPORTANT: Remove protective plastic...

In Stock

$14.36

Add

Parts for Brinkmann Grills: 15" X 5" Burner Heat Distribution Shield

15" X 5" Burner Heat Distribution Shield

Item# BMHP10

Stainless steel tent shaped heat distribution plate. Measures 15" long X 5" wide (measured across the bottom) . Features 2 vents on each side and a centered cut out section on one end. IMPORTANT: Remove protective plastic film...

In Stock

Retail: $22.90

$18.76

Add

Parts for Brinkmann Grills: 15-1/8" X 3-3/4" Burner Heat Distribution Shield

15-1/8" X 3-3/4" Burner Heat Distribution Shield

Item# BMHP11

Stainless steel tent shaped burner heat shield. Measures 15-1/8" long X 3-3/4" wide (measured across the bottom). Features punched holes and cut-outs on both ends. Fits many Brinkmann models. IMPORTANT: Remove protective plastic film (if...

In Stock

$14.28

Add

Parts for Brinkmann Grills: 15-1/4" X 3-1/8" Burner Heat Distribution Shield

15-1/4" X 3-1/8" Burner Heat Distribution Shield

Item# BMHP5

Stainless steel tent shaped burner shield. Measures 15-1/4" long X 3-1/8" wide (measured across the bottom). Features single mounting hole at the peak of the tent, on each end. Fits many Brinkmann models. IMPORTANT: Remove protective plastic...

In Stock

$15.46

Add

Parts for Brinkmann Grills: 14-1/4" X 4" Burner Heat Distribution Shield

14-1/4" X 4" Burner Heat Distribution Shield

Item# BMHP6

Stainless steel "shallow" tent shaped burner shield. Measures 14-1/4" long X 4" wide (measured across the bottom). Features punched holes and cut-outs on both ends. Fits many Brinkmann models. IMPORTANT: Remove protective plastic film...

In Stock

$14.37

Add

Parts for Brinkmann Grills: 16-13/16" X 3-5/16" Burner Heat Distribution Shield

16-13/16" X 3-5/16" Burner Heat Distribution Shield

Item# BMHP7

Stainless steel tent shaped burner shield. Measures 16-13/16" long X 3-5/16" wide (measured across the bottom). Features single mounting hole at the peak of the tent, on each end. Fits many Brinkmann models. IMPORTANT: Remove protective plastic...

In Stock

Retail: $24.00

$17.18

Add

Parts for Brinkmann Grills: 15-3/8" X 3-5/8" Louvered Burner Heat Distribution Shield

15-3/8" X 3-5/8" Louvered Burner Heat Distribution Shield

Item# BMHP8

Louvered heat tent measures 15-3/8" long X 3-5/8" wide (measured across the bottom). Features four louver vents on the top of the shield. Stainless steel. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$21.94

Add

Parts for Brinkmann Grills: 17-3/4" X 10-1/4" Burner Heat Distribution Shield (Replaces Brinkmann OEM Part 600-8750-1)

17-3/4" X 10-1/4" Burner Heat Distribution Shield (Replaces Brinkmann OEM Part 600-8750-1)

Item# BMHP9

17-3/4" X 10-1/4" stainless steel heat distribution plate. Features a shallow vented tent shape with one larger hole for manually igniting the burner, when necessary. This heat plate is designed to be used with Brinkmann "U"...

In Stock

$36.55

Add

Parts for Brinkmann Grills: 15-3/8" X 3-3/4" Burner Heat Distribution Shield

15-3/8" X 3-3/4" Burner Heat Distribution Shield

Item# CHMBHP3

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 15-3/8" long X 3-3/4" wide (measured across the bottom). IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

Retail: $21.40

$15.97

Add

Parts for Brinkmann Grills: 17-9/16in. X 3-3/16in. Burner Heat Distribution Shield - Perfect Flame

17-9/16in. X 3-3/16in. Burner Heat Distribution Shield - Perfect Flame

Item# PFHP1

Perfect Flame (Lowes Home Improvement Model) Heavy gauge 430 stainless steel, tent shaped replacement burner shield/heat tent. Tapered Design Measures 17-9/16" long X 3-3/16" wide (measured across the bottom). Features slotted holes at one...

In Stock

$14.47

Add

Cooking Grids | Brinkmann

Parts for Brinkmann Grills: 15-3/8" X 9-1/4" Porcelain Coated Stamped Steel Cooking Grate

15-3/8" X 9-1/4" Porcelain Coated Stamped Steel Cooking Grate

Item# 59411

Porcelain coated stamped steel cooking grate. Measures 9-1/4" wide x 15-3/8" front to back. More than one required, sold individually.

In Stock

$21.94

Add

Parts for Brinkmann Grills: 16-7/8" X 23" Two Piece Cast Iron Cooking Grate Set

16-7/8" X 23" Two Piece Cast Iron Cooking Grate Set

Item# 60662

"Two piece" cast iron cooking grate set. Porcelain coated "matte" finish (non-gloss). Each section measures 16-7/8" front to back X 11-1/2" wide, for a total set width of 23".

SOLD OUT: Expected 6/30/2026

$61.27

Parts for Brinkmann Grills: Cooking Grate - Two Pc. Cast Iron - (24-3/4in. x 19-3/16in.)

Cooking Grate - Two Pc. Cast Iron - (24-3/4in. x 19-3/16in.)

Item# 62152

2pc. Heavy duty, cast iron cooking grates hold heat, and clean up easily thanks to its porcelain enamel finish and non-stick properties. Two grates at 19-3/16in. x 12-3/8in. each in a set that offers a total of 24-3/4in. x 19-3/16in. coverage. Freshen...

In Stock

$96.84

Add

Parts for Brinkmann Grills: 17-5/8" X 26-5/8" Three Piece "Matte Finish" Cast Iron Cooking Grate Set

17-5/8" X 26-5/8" Three Piece "Matte Finish" Cast Iron Cooking Grate Set

Item# 64103

17-5/8" X 26-5/8" three piece, "matte finish", porcelain enameled cast iron cooking grate set. Each section measures 17-5/8" front to back X 8-7/8" wide for a total set width of 26-5/8".

In Stock

Retail: $102.85

$76.70

Add

Parts for Brinkmann Grills: 17-5/8" X 8-7/8" Porcelain Coated "Gloss Finish" Cast Iron Cooking Grate

17-5/8" X 8-7/8" Porcelain Coated "Gloss Finish" Cast Iron Cooking Grate

Item# 64103-1

"Gloss finish" porcelain enameled cast iron cooking grate. Measures 17-5/8" front to back X 8-7/8" wide. Sold individually.

In Stock

Retail: $42.86

$24.99

Add

Parts for Brinkmann Grills: 18-7/8" X 24-3/4" Two Piece "Matte Finish" Cast Iron Cooking Grate Set

18-7/8" X 24-3/4" Two Piece "Matte Finish" Cast Iron Cooking Grate Set

Item# 66662

BRINKMANN Two piece, porcelain coated "matte finish" (non-gloss) cast iron cooking grate set. Fits some Brinkmann, Sams Club, Turbo, HomeDepot and Lowes various grills. Each piece measures 12-3/8" wide x 18-7/8" front to...

In Stock

$67.49

Add

Parts for Brinkmann Grills: 17-9/16" X 28-1/4" Three Piece "Gloss Finish" Cast Iron Cooking Grate Set

17-9/16" X 28-1/4" Three Piece "Gloss Finish" Cast Iron Cooking Grate Set

Item# 67233

Three piece "gloss finish" porcelain coated cast iron cooking grate set. All sections measure 17-9/16" front to back. Two sections are 8-7/8" wide and one section is 10-3/8" wide. Total set width measures 28-1/8".

In Stock

$69.88

Add

Parts for Brinkmann Grills: 18-3/4" X 31-1/2" Three Piece Cast Iron Cooking Grate Set

18-3/4" X 31-1/2" Three Piece Cast Iron Cooking Grate Set

Item# 68073

Heavy duty 3 piece "matte finish" cast iron cooking grate set. Each section measures 18-3/4" front to back X 10-1/2" wide. For a total set width of 31-1/2".

In Stock

Retail: $130.45

$94.61

Add

Parts for Brinkmann Grills: Cooking Grate - Cast Iron - (19-1/8in. x 12-3/8in.)

Cooking Grate - Cast Iron - (19-1/8in. x 12-3/8in.)

Item# CG58PCI

Heavy duty, cast iron cooking grate holds heat, and cleans up easily thanks to its porcelain enamel matte finish and non-stick properties. One grate at 19-1/8in. x 12-3/8in. width. Measure you’re grills grate area to calculate the quantity of grates...

In Stock

Retail: $75.80

$59.71

Add

Parts for Brinkmann Grills: 15" X 31-7/8" Three Piece Cast Iron Cooking Grate Set

15" X 31-7/8" Three Piece Cast Iron Cooking Grate Set

Item# CG63

Heavy duty 3 piece cast iron cooking grate set, with porcelain coated matte finish. Two sections measures 12" wide x 15" front to back and the third "center" section measures 7-7/8" wide x 15" front to back. For a total set width...

In Stock

Retail: $196.65

$108.60

Add

Parts for Brinkmann Grills: 17-1/2" X 19-1/8" Two Piece Cast Iron Cooking Grate Set

17-1/2" X 19-1/8" Two Piece Cast Iron Cooking Grate Set

Item# CG67222

19-1/8" X 17-1/2" two piece "matte finish" cast iron cooking grate set. Both pieces measure 17-1/2" front to back. One piece measures 10-3/8" wide and the other 8-3/4" wide, for a total set width of 19-1/8". Grates...

In Stock

Retail: $110.22

$53.58

Add

Parts for Brinkmann Grills: 17-5/8" X 10-3/8" Cast Iron Cooking Grate

17-5/8" X 10-3/8" Cast Iron Cooking Grate

Item# CG67P-CI

Heavy duty, matte finish cast iron cooking grate. Measures 10-3/8" wide X 17-5/8" front to back. Normally used in sets of multiples of itself or along with part CG73P-CI. Sold individually.

In Stock

Retail: $45.50

$34.47

Add

Parts for Brinkmann Grills: 19-1/4" X 10-3/8" Cast Iron Cooking Grate

19-1/4" X 10-3/8" Cast Iron Cooking Grate

Item# CG69PCI

Heavy duty, porcelain enameled "matte finish" cast iron cooking grate. Measures 10-3/8" wide X 19-1/4" front to back. More than one required. Sold individually. (Also available as a set of 3, see part CG69PCI-3).

In Stock

Retail: $55.20

$43.68

Add

Parts for Brinkmann Grills: 19-1/4" X 31-1/8" Three Piece Cast Iron Cooking Grate Set

19-1/4" X 31-1/8" Three Piece Cast Iron Cooking Grate Set

Item# CG69PCI-3

Heavy duty, porcelain enameled "matte finish" cast iron, 3-piece cooking grate set. Fits Ducane Stainless Series 5-burner grills and a variety of other brands and models. Each section measures 19-1/4" front to back X 10-3/8" wide. Total...

In Stock

Retail: $165.60

$131.05

Add

Parts for Brinkmann Grills: 17-5/8" X 8-3/4" Cast Iron Cooking Grate, Porcelain Enameled

17-5/8" X 8-3/4" Cast Iron Cooking Grate, Porcelain Enameled

Item# CG73P-CI

"Matte finish" porcelain enameled cast iron cooking grate. Measures 8-3/4" wide X 17-5/8" front to back. Sold individually.

In Stock

Retail: $52.30

$31.30

Add

Parts for Brinkmann Grills: 19-1/4" X 10-3/8" Stainless Steel Rod Cooking Grate

19-1/4" X 10-3/8" Stainless Steel Rod Cooking Grate

Item# CG96SS

Single piece, 5/16" diameter solid stainless steel rod (304 Grade), cooking grate. Fits Ducane Stainless Series 5-burner models and a variety of other brands/models. Measures 19-1/4" front to back X 10-3/8" wide. More than one required....

In Stock

Retail: $122.50

$81.59

Add

Parts for Brinkmann Grills: 19-1/4" X 31-1/8" Three Piece Stainless Steel Rod Cooking Grate Set

19-1/4" X 31-1/8" Three Piece Stainless Steel Rod Cooking Grate Set

Item# CG96SS-3

3 piece stainless steel cooking grate set. Sturdy 5/16" diameter solid stainless steel rod construction (304 grade). Fits Ducane Stainless Series 5-burner models and a variety of other brands/models. Each piece measures 19-1/4"...

In Stock

Retail: $367.50

$234.77

Add

Grill Exterior | Brinkmann

Parts for Brinkmann Grills: Gas/Heat Control Knob - Includes Universal Fit Kit

Gas/Heat Control Knob - Includes Universal Fit Kit

Item# 02342

Attractive black and chrome heat/gas Control Knob measures 2-5/16in. (dia. at base). Replaces an existing damaged, worn or broken heat control knob on bbq gas grills. Fit Kit included to secure knob to 6mm or 8mm

In Stock

Retail: $14.95

$11.31

Add

Ignitor Components | Brinkmann

Parts for Brinkmann Grills: 6" Jumper Wire For Electronic Ignition Module

6" Jumper Wire For Electronic Ignition Module

Item# 03197

Jumper wire for closing off unused terminals on battery powered electronic ignition modules. Measures 6" long, (including the connectors). Features flat spade connectors with plastic protectors on each end.

In Stock

$2.87

Add

Parts for Brinkmann Grills: 3 Output "AA" Ignition Module With Push Button Cap

3 Output "AA" Ignition Module With Push Button Cap

Item# 03333

Three output "AA" electronic ignition module with push button battery cap. Features 3 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.

In Stock

$18.57

Add

Parts for Brinkmann Grills: 4 Output "AA" Electronic Ignition Module With Push Button Cap

4 Output "AA" Electronic Ignition Module With Push Button Cap

Item# 03340

Four output "AA" electronic ignition module with push button battery cap. Features 4 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.

In Stock

$17.93

Add

Parts for Brinkmann Grills: 5 Output "AA" Electronic Ignition Module With Push Button Cap

5 Output "AA" Electronic Ignition Module With Push Button Cap

Item# 03380

Five output "AA" electronic ignition module with push button battery cap. Features 5 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Module measures...

In Stock

$27.22

Add

Parts for Brinkmann Grills: 3-5/8" Igniter Electrode With Mounting Bracket, Main Burner

3-5/8" Igniter Electrode With Mounting Bracket, Main Burner

Item# 04022

3-5/8" long main burner igniter electrode with mounting bracket. Features a 90 degree bend electrode tip, 3" long white ceramic insulator with attached mounting bracket and a flat male spade wire terminal. Mounting hardware included. Fits a variety...

In Stock

$4.39

Add

Parts for Brinkmann Grills: "AA" Electronic Spark Generator With Two Outputs

"AA" Electronic Spark Generator With Two Outputs

Item# B072218

"AA" electronic igniter spark generator. Includes push button cap, internal battery connection spring and mounting locknut. Features two output terminals on back of the module. Genuine Broilmaster Part.

In Stock

Retail: $25.00

$22.50

Add

Parts for Brinkmann Grills: 2 Output "AA" Electronic Ignition Module With Push Button Cap

2 Output "AA" Electronic Ignition Module With Push Button Cap

Item# G409-0021-W1

Two output "AA" electronic ignition module with push button battery cap. Features 2 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Fits Charbroil Performance,...

In Stock

$9.99

Add

Parts for Brinkmann Grills: Push Button/Battery Cap For "AA" Electronic Ignition Module

Push Button/Battery Cap For "AA" Electronic Ignition Module

Item# G409-0030-W1

Genuine Char-Broil Push button battery cap with spring, for "AA" electronic ignition module for Char-Broil, Kenmore, Thermos and some K-Mart models. The cap features a soft rubber "push button" top. The diameter at the base of the cap...

In Stock

$4.99

Add

Parts for Brinkmann Grills: Push Button Cap For MHP "AAA" Electronic Ignition Module

Push Button Cap For MHP "AAA" Electronic Ignition Module

Item# GGEIBPB

Push button battery cap for MHP "AAA" electronic ignition module. Features chrome finish with black rubber push button top. Base diameter is: 1-5/16" Includes module mounting lock ring nut.

In Stock

$4.94

Add

Parts for Brinkmann Grills: Ignitor Collector Box And Electrode With Single Mounting Screw

Ignitor Collector Box And Electrode With Single Mounting Screw

Item# IG-21

Ignitor gas collector box with electrode and 14" wire. This collector box extends out about 1-1/2 inches and the electrode length is 1/2" from the gas collector box. Mounts with single screw.

In Stock

Retail: $15.25

$9.75

Add

Parts for Brinkmann Grills: Ignitor Collector Box And Electrode Dual Mounting Screws

Ignitor Collector Box And Electrode Dual Mounting Screws

Item# IG-22

Ignitor gas collector box with electrode and wire. This collector box extends out about 4 inches and the electrode length is 3-1/4" from the gas collector box. Mounts with two screws.

In Stock

Retail: $15.25

$9.20

Add

Parts for Brinkmann Grills: T-Shaped Ignitor Collector Box and Electrode - 5-5/16in. x 3-1/2in.

T-Shaped Ignitor Collector Box and Electrode - 5-5/16in. x 3-1/2in.

Item# IG-23

Stainless steel ignitor spark box with electrode and wire for Brinkmann, Sams Club, Home Depot and Charmglow gas grills. Mounts between burners and ignites the gas as it flows through the burner tube. IG-23B Ignition collector box with probe and...

In Stock

Retail: $15.25

$9.75

Add

Parts for Brinkmann Grills: 4-5/16" T-Shaped Ignitor Collector Box and Electrode

4-5/16" T-Shaped Ignitor Collector Box and Electrode

Item# IG-29

Stainless steel ignitor spark box with electrode and wire. Mounts between burners and ignites the gas as it flows through the burner tube. Measures 4-5/16" across the box and stands out approximately 3-1/2".

In Stock

Retail: $14.25

$9.30

Add

Parts for Brinkmann Grills: 20" Igniter Wire, With 2 Female Flat Spade Connector Ends

20" Igniter Wire, With 2 Female Flat Spade Connector Ends

Item# IG18B

20" igniter wire. Features flat female spade connectors on both ends.

In Stock

Retail: $3.10

$2.81

Add

Parts for Brinkmann Grills: Igniter Wire - 20in. (Female Spade to Female Round Termination)

Igniter Wire - 20in. (Female Spade to Female Round Termination)

Item# IG7B

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end. What’s Included: (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to...

In Stock

Retail: $2.90

$2.81

Add

Parts for Brinkmann Grills: Electronic Ignition Module with Push Button Start - 2 Output

Electronic Ignition Module with Push Button Start - 2 Output

Item# IGEIB2B

Universal gas grill 2 output electronic ignition module with push button cap that utilizes one AAA Battery (not included). Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male...

In Stock

Retail: $27.40

$22.92

Add

Parts for Brinkmann Grills: 3 Output "AAA" Electronic Ignition Module With Push Button Battery Cap

3 Output "AAA" Electronic Ignition Module With Push Button Battery Cap

Item# IGEIB3B

3 output "AAA" electronic spark generator. Features three male spade output wire terminals on the back side, clear epoxy encapsulated coil, module mounting lock ring and a push button battery cap. Requires a 3/4" or 13/16" mounting hole....

In Stock

$20.94

Add

Parts for Brinkmann Grills: Electronic Ignition Module with Push Button Start - 4 Output

Electronic Ignition Module with Push Button Start - 4 Output

Item# IGEIB4B

Universal gas grill 4 output electronic ignition module with push button cap that utilizes one AAA Battery (not included). Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male...

In Stock

Retail: $27.40

$20.99

Add

Parts for Brinkmann Grills: 6 Output "AA" Electronic Ignition Module With Push Button Cap

6 Output "AA" Electronic Ignition Module With Push Button Cap

Item# IGEIB6B

Universal 6 output "AA" ignition module with soft push button battery cap. Features 6 output terminals on the back. Mounting hole needs to be at least 7/8" diameter. Battery not included.

In Stock

$20.94

Add

Parts for Brinkmann Grills: Electronic Ignition Module with Push Button Start - 1 Output

Electronic Ignition Module with Push Button Start - 1 Output

Item# IGEIBB

Universal gas grill Single Output electronic ignition module with push button cap that utilizes one AAA Battery (not included). Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (1)...

In Stock

Retail: $27.40

$20.94

Add

Regulators and Hoses | Brinkmann

Parts for Brinkmann Grills: Propane Adapter Hose - Stainless Steel Overbraid - (14ft.)

Propane Adapter Hose - Stainless Steel Overbraid - (14ft.)

Item# 100700-168

14ft. length propane adapter hose with stainless steel overbraid. Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length...

In Stock

$69.49

Add

Parts for Brinkmann Grills: Quick Connect Fitting - On/Off Ball Valve - 3/8in. Fitting

Quick Connect Fitting - On/Off Ball Valve - 3/8in. Fitting

Item# 104007

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug...

In Stock

$34.99

Add

Parts for Brinkmann Grills: Quick Connect Fitting - 3/8in. (For 3/8in. Hose)

Quick Connect Fitting - 3/8in. (For 3/8in. Hose)

Item# 104406

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a...

In Stock

$29.95

Add

Parts for Brinkmann Grills: Commercial 2-Stage Regulator - 30in. HD Hose - 3/8in. Fittings

Commercial 2-Stage Regulator - 30in. HD Hose - 3/8in. Fittings

Item# 106238-30

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of...

In Stock

$52.99

Add

Parts for Brinkmann Grills: Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.)

Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.)

Item# 3090

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP). Has...

In Stock

Retail: $120.00

$108.00

Add

Parts for Brinkmann Grills: Control Knob - For Automatic Gas Timer - (1 to 3hrs.)

Control Knob - For Automatic Gas Timer - (1 to 3hrs.)

Item# 3090-01

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic...

In Stock

Retail: $23.00

$20.70

Add

Parts for Brinkmann Grills: Automatic Gas Timer - Shut Off Valve - (20/40/60min.)

Automatic Gas Timer - Shut Off Valve - (20/40/60min.)

Item# 3092

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane...

In Stock

Retail: $120.00

$108.00

Add

Parts for Brinkmann Grills: Control Knob - For Automatic Gas Timer - (20/40/60min.)

Control Knob - For Automatic Gas Timer - (20/40/60min.)

Item# 3092-01

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality...

In Stock

Retail: $31.00

$27.90

Add

Parts for Brinkmann Grills: Automatic Gas Timer with Stainless Steel Connection Box - (20/40/60min.)

Automatic Gas Timer with Stainless Steel Connection Box - (20/40/60min.)

Item# 5521-11T

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly. Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and...

In Stock

Retail: $267.00

$240.30

Add

Parts for Brinkmann Grills: Automatic Gas Timer with Stainless Steel Connection Box - (1 to 3hrs.)

Automatic Gas Timer with Stainless Steel Connection Box - (1 to 3hrs.)

Item# 5521-13T

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly. Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be...

In Stock

Retail: $267.00

$240.30

Add

Parts for Brinkmann Grills: Propane Regulator and Single Hose Assy. (24in.)

Propane Regulator and Single Hose Assy. (24in.)

Item# 65941

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber...

In Stock

Retail: $47.39

$40.19

Add

Parts for Brinkmann Grills: Propane Regulator and Single Hose Assy. (40in.)

Propane Regulator and Single Hose Assy. (40in.)

Item# 99281

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. Is your gas...

In Stock

Retail: $49.49

$42.29

Add

Parts for Brinkmann Grills: Propane Regulator and Single Hose Assy. (24in.)

Propane Regulator and Single Hose Assy. (24in.)

Item# HR4B

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a...

In Stock

Retail: $29.30

$28.22

Add

Parts for Brinkmann Grills: Propane Regulator and Dual (2) Hose Assy. (2 x 22in.)

Propane Regulator and Dual (2) Hose Assy. (2 x 22in.)

Item# HR5B

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas...

In Stock

Retail: $60.00

$42.49

Add

Parts for Brinkmann Grills: Propane Regulator and Single Hose Assy. (40in.)

Propane Regulator and Single Hose Assy. (40in.)

Item# HR7B

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower...

In Stock

Retail: $33.60

$29.99

Add

Parts for Brinkmann Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (10ft.)

3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (10ft.)

Item# NG10

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering. Quick connect...

In Stock

Retail: $82.99

$54.04

Add

Parts for Brinkmann Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (12ft.)

3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (12ft.)

Item# NG12

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering. Quick...

In Stock

Retail: $86.99

$60.94

Add

Parts for Brinkmann Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (14ft.)

3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (14ft.)

Item# NG14

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering. Quick...

In Stock

Retail: $93.99

$65.84

Add

Parts for Brinkmann Grills: Convertible Gas Pressure Regulator (Natural Gas | Propane)

Convertible Gas Pressure Regulator (Natural Gas | Propane)

Item# PR-SU

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily...

In Stock

$20.59

Add

Parts for Brinkmann Grills: Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.)

Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.)

Item# RGB

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in. propane gas hose. Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose...

In Stock

$7.93

Add