Broil King 14-3/8" long stainless steel "Tube-In-Tube" burner with insect screen and air/fuel mixture adjustment shutter. These unique large diameter "dual tube" stainless steel burners feature side porting which provides two rows of flame per burner for enhanced heat distribution. Fits Broil King "Signet" and "Sovereign" models (2006 and Newer) with front to back straight tube burners.  Also fits a variety of Broil-Mate and GrillPro models, please confirm dimensions. Mounting hardware and installation instructions included. More than one required, sold individually. Genuine Broil King Part.

20-1/2" X 1-1/2"  burner flame carryover assembly.  Includes both the upper and lower sections.  Features 3 large round hole openings for the burner tubes and 2 smaller holes for the electrodes.  Fits Broil King Signet and Sovereign models with "tube in tube" burners.  430 Stainless Steel.  Genuine Broil King Part.

29" X 1-1/2"  burner flame crossover assembly.  Includes both the upper and lower sections.  Features 4 large round hole openings for the burner tubes and 2 smaller holes for the electrodes. Fits Broil King Sovereign models with "tube in tube" burners.  430 Stainless Steel.  Genuine Broil King Part.

"3" piece stainless steel baffle kit. Fits Broil King Sovereign "XL20 and XL90". This kit includes 3 baffle plates. Two (the left and right side) measure 9" front to back  X 7" wide, (not including the mounting tabs) and one (middle) measures 9" front to back X 10-1/4" wide. The baffle plates are positioned near the bottom of the firebox, below the main burner burners.  Fits models 988814, 988817, 988844 and 988847.  Genuine Broil King Part.

Stainless steel vented baffle plate. Fits Broil King Sovereign "20 and 90".  Shallow tent shaped plate measures 9" front to back X 7-7/8" wide. The baffle plate is positioned near the bottom of the firebox, below the main burner tubes. Fits models, 987814, 987817, 987844 and 987847. Genuine Broil King Part.

Broil King 13-3/4" front to back X 5-7/8" wide stainless steel "Flav-R-Wave", heat distribution plate. Fits Broil King "Signet" and "Sovereign" models with "Tube-In-Tube" burners (model years 2006 and Newer).  Also fits a variety of Monarch 300 Series (2014-Newer), Huntington, Broil-Mate and Sterling models (2010 and Newer).  More than one required, sold individually.  Genuine Broil King Part.

13-3/4" X 4" stainless steel "divider". These heat partitions are used with the "Flav-R-Wave" system and enable better zone temperature control. Fits Broil King "Signet" and "Sovereign" models with "Tube-In-Tube" burners, model years 2006 and newer. Sold individually. Genuine Broil King Part.

15" X 12-3/4" exact fit cast iron "reversible" griddle. Can be used in place of or on top of cooking grates. Features a durable matte finish porcelain coating and is reversible. Use the flat side for frying or the ribbed side for grilling.  Fits Broil King "Signet" Series (2006-Newer) and "Crown" Series (2013 and Newer). Genuine Broil King Part.

15-1/8" X 25-1/2" two piece cast iron reversible cooking grate set.  Use the peaked side for perfect grill marks on your steaks or the grooved side for self-basting chicken and veggies.  Features a matte finish porcelain coating. Each piece measures 15-1/8" front to back X 12-3/4" wide, for a total set width of 25-1/2". Fits Broil King "Signet" 20, 70, 90, 320 models (2007-Newer). Also fits a variety of Crown, Sterling and Broi.-Mate models, please verify dimensions. Genuine Broil King Part.

15" X 25-1/2" two piece stainless steel, 5/16" solid rod, cooking grate set. Each piece measures 15" front to back X 12-3/4" wide, for a total set width of 25-1/2". Fits Broil King "Signet" 20, 70, 90, 320 models (2007-Newer) and "Crown" 10, 20, 40, 90 models (2008-Newer). Genuine Broil King Part.

Black plastic control knob bezel. Measures 2-7/8" in diameter. Features "High to Low" indications. Fits Broil King Signet/Sovereign models with "tube in tube" burners. Genuine Broil King Part.

Locking swivel caster with mounting post. Features 2-1/4" diameter caster wheel, locking mechanism and a 1-1/4" long mounting post which is designed to fit into a leg frame insert (not included). Fits Broil King Signet/Sovereign models with "tube in tube" burners. Genuine Broil King Part.

Black plastic 7" wheel with grey side wall trim. Features sturdy plastic contruction. Measures 7" in diameter with a 3/8" ID (inner diameter) axle hole. Fits Broil King Signet/Sovereign models with "tube in tube" burners. Genuine Broil King Part.

Heavy duty black 8" wheel with grey side wall trim. Features heavy duty construction, plastic hub with rubber tire tread. Measures 8" in diameter with a 3/8" ID (inner diameter) axle hole. Fits Broil King Signet/Sovereign models with "tube in tube" burners. Genuine Broil King Part.

Large black plastic control knob.  Measures 2-1/4" in diameter and has a 1/2" long valve stem extension.  Features a chrome top with position indicator and a black rubber grip.  Fits Broil King Signet/Sovereign and Baron models with "tube in tube" burners, as well as a variety of Sterling, Broil-Mate and Huntington models.  Genuine Broil King Part.

Pack of "three" wheel axle push nut caps. Fit Broil King Signet and Sovereign models with "tube in tube" burners and use either a 6" or 8" wheels. Genuine Broil King Part.

Two output "AAA" electronic ignition module.  Includes push button cap with battery connection spring and mounting locknut ring.  Features two output terminals on back of the module.  Fits a variety of Broil King Signet and Sovereign models with "tube in tube" burners.  Genuine Broil King Part.

Four output "AAA" ignition module with push button battery cap and module mounting lock ring nut.  Measures 2-5/8" long X 2" wide.  Features 4 flat spade output terminals on the back.  Fits Broil King Signet/Sovereign models with "tube in tube" burners.  Genuine Broil King Part.

Igniter electrode and wire.  Features a 2" long white ceramic insulator with a molded in 11-1/2" long wire that terminates with a female flat spade connector.  Fits Broil King Signet/Sovereign and Regal models with "tube in tube" burners.  Genuine Broil King Part.

Igniter electrode and wire.  Features a 2" long white ceramic insulator with a molded in 14" long wire that terminates with a female flat spade connector.  Fits Broil King Signet/Sovereign, Baron and Regal /Imperial models with "tube in tube" burners.  Genuine Broil King Part.

Chrome Broil King lid logo name plate/temperature gauge bezel. Measures 6-1/8" long X 3-13/16" tall. Features 2 mounting pins on the back that are spaced 3-1/2" apart. This bezel is designed to fit with Broil King temperature gauge, part 18013 (sold separately).  Fits Broil King Signet/Sovereign, Baron and Regal/Imperial models. Genuine Broil King Part.

Large chrome featured lid temperature gauge. Measures 2-5/16" wide X 1-15/16" tall and has a 1-1/8" long threaded temperature probe on the back.  Features a dial face temp range of 0-700 degrees F, 0-350 C. Fits Broil King Signet/Sovereign, Baron and Regal/Imperial models. Designed to mount inside of Broil King Logo bezel, part 10081-BK630 (sold separately).  Round brass mounting thumb nut included. Genuine Broil King Part.

Pack of 10 disposable aluminum grease catch pan liners. Each liner measures 5-3/4" X 4-3/4" (measured from edge to edge on the top lip. Fits all Broil King models with "tube in tube" burners. This aluminum pan is also great for grilling veggies and heating sauces. Genuine Broil King Part.

Grease catch pan with "matte powder coat finish". Measures 6-1/8" X 5-1/8", measurement includes the top rim lip. Features a mounting bracket at each end. This pan is designed to hold a disposable aluminum liner, Broil King Part 50416, sold separately. Fits Broil King Signet/Sovereign and Baron models. Genuine Broil King Part.

Aluminum grease pan "shield" for Broil King Signet/Sovereign models.  Measures 5" X 2-7/8" and features six "spring tension" mounting tabs, three on each side. Designed to mount onto the bottom grease tray, part 57154-901 (sold separately). Genuine Broil King part.

Bottom grease tray for Broil King Signet/Sovereign Models, including model numbers 946884, 946854, 946454. Measures 18-5/8" long X 6-3/4" wide. Features 4 mounting screw holes (2 at each end), matte powder coat finish, sloped bottom (to facilitate grease drainage towards opening) and 2 tabs on the bottom side to support the grease catch pan(see Part 52009-901), sold separately.  If the drain opening "shield" needs to be replaced, see part 52049-91 (sold separately).  Replaces Part 57054-901. Genuine Broil King Part.

Universal replacement rotisserie motor, by GrillPro. Features a 6 foot long power cord, 20 lb. capacity, long lasting weather resistant housing and an On/Off switch. Replaces "most" rotisserie motors.

Genuine Broil-King Premium, Complete Rotisserie Kit that fits most brands of gas grills! Get your grill spun up with this fantastic, complete rotisserie kit. Features a high capacity electric motor with a 6ft. cord, along with an adjustable 33-1/2in. to 39-1/2in. Spit Rod paired with two heavy duty Spit Forks. See complete kit contents below.

Rotisserie Fitment:

• Universal Fit Kit: Includes Universal mounting brackets with hardware to adapt to most grills.
• OEM Mounting Brackets for: Broil King, Broil Mate, Sterling and GrillPro gas grill models

Deluxe Electric Rotisserie Kit Includes:

• (1) 20lb. Load Motor with on/off switch and 6ft. power cord.
• (1) 33-1/2in. Spit Rod
• (1) 6in. Spit Rod Extension
• (2) Heavy duty split forks
• (1) counter balancing kit
• (1) Set of Universal mounting brackets
• (1) Set of OEM mounting brackets
• Assembly instructions included

A BBQ rotisserie is an essential accessory for any grilling enthusiast looking to elevate their outdoor cooking experience. Achieve succulent and evenly cooked meats that boast exceptional flavor and tenderness. The rotisserie ensures that the meat cooks evenly on all sides, resulting in a deliciously crispy exterior and juicy interior. Order a rotisserie kit today!

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

• 1 On/Off Ball Valve Quick Connect Fitting
• Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 3/8" Gas Line Quick Connect Fitting

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

• (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.