21" stainless steel "Bowtie" burner. Dimensions are 10-1/2" X 21-3/4". Fits Broilmaster Series 3 grills, D3, P3, S3 and Ducks Unlimited models. Venturi tube drop (distance from the bottom of the burner to the bottom of the tubes) is 3-3/4". Venturi tube reach (distance from the end of the venturi tubes to the center line of vertical pipes) is 4-3/4".   Quality aftermarket part, Broiilmaster no longer provides a 21-3/4" stainless Bowtie Burner. Minor Assembly Required.   IMPORTANT: Fits Model Years Prior To 2011 ONLY.

Cast iron burner and twin curved venturi tube set. For large dual up front control grills D3, P3 and Ducks Ulimited. Burner dimensions are 10-3/4" X 21-3/4". Includes burner, venturi tubes and gasket. MInor Assembly Required.  Quality aftermarket part.

Genuine Broilmaster OEM replacement 17 Inch stainless steel Bowtie Burner. Fits Broilmaster P3 and D3 model years prior To 2011. Venturi tubes feature air/fuel mixture adjustment shutters with insect screens.  45,000 BTU has the same output as the 21in. version.

• Burner Dimensions 17in. x 9-1/2in.
• Venturi tube drop dimension: (distance from the bottom of the burner to the bottom of the tubes) is 3-7/8in. Venturi tube reach (distance from the end of the venturi tube to the center line of vertical pipe) is 4-1/4in.
• Includes burner, venturi, gasket, and screws
• MInor Assembly Required. 
• Genuine Broilmaster Part.

Genuine Broilmaster heavy duty 1/4in. porcelain coated steel rod briquette rack for Broilmaster P3 and P3X models. Dimensions are 23-7/8in. X long 14-3/16in. incuding all mounting extensions. Surface area of the rack is 23in. X 13-7/16in.

Don’t forget to pick up new Ceramic Briquettes Item# DPA34.

What’s Included:

• (1) Genuine Broilmaster heavy duty 1/4in. Coated steel rod briquette rack for Broilmaster P3 and P3X models.
• Dimensions are 23-7/8in. X long 14-3/16in. Including mountain tabs.
• Surface area of the rack is 23in. X 13-7/16in.
• Genuine Broilmaster Replacement Part.

Broilmaster D3 Galvanized Steel Briquette Grate/Rack fits Broilmaster D3 models.

Measures 23-1/8in. x 13-5/8in. Quality upgraded part, made in the USA.

BBQer Choice® Porcelain Grill Briquets. Superior heat transfer, Self Cleaning, Virtually indestructible, Kiln-Fired Porcelain, For all gas and electric grills, Covers approximately 250 square inches.

15-1/2" X 25-1/2" Stainless Steel Smoker Shutter has blinds mounted between the fire and the food. Leave open for high-temperature grilling and searing; close for slow roasting, smoking, and baking. The Smoker Shutter may be used with any P3, D3 and T3 grill.  Genuine Broilmaster Part.

13-3/4" X 23-3/4" Stainless Steel Flavor Screen can be used to replace an existing Flavor Screen or to upgrade from ceramic briquettes to protect the burner and add flavor by catching and vaporizing food drippings. For use with P3, G3, D3 T3, H3, Broilmaster Grills.  Genuine Broilmaster Part.

Pack of 12 "Flare Buster" ceramic tiles. Each tile measures 7-1/8" long X 3-3/8" wide and 5/16" thick. These ceramic radiant tiles are designed to reduce flame flare ups, protect the burners below and help to radiate heat upwards evenly. This pack of twelve tiles is a custom fit for Broilmaster Grill Body 3 and 3X briquette rack part 110-B101061 (Sold separately). Genuine Broilmaster Part.

69 count, genuine Broilmaster Ceramic Briquettes, each measuring 2in. x 2in. for a total of 276 sq. in. coverage. Broilmaster briquettes feature a dome shape to help with self-cleaning properties and increase radiant heat distribution. For use with briquette trays and racks that utilize a 2in. x 2in. briquette, or an upgrade for grills that utilize lava rock grates.

Are your briquettes broken, cracked or caked with grease and contaminants? Maybe you’ve been using lava rock and you’re ready to up your grill game? These premium briquettes allow maintaining stable cooking temperatures with less gas, while protecting your burners.  Ceramic briquettes vaporize drippings from food, enchanting the flavor of your grilled dishes by creating flavorful smoke and vapor that infuse into the food.

What’s Included:

• 69 - Genuine Broilmaster Ceramic Briquettes, 2in. x 2in.  (192 sq. in. coverage).

Compatibility:

• For Broilmaster and other Brands that utilize heat grates with lava rock or briquettes. A serious upgrade from Lava rock; distribute briquettes evenly for exceptional performance.
• For use with Briquette Trays that utilize 2in. x 2in. briquettes, such as gas grills by Lynx, Alfresco, Dynasty, GE Monogram and more.

Broilmaster briquettes are a popular, economical choice for many grillers seeking improved heat control, flavor enhancement, and extended grill life.

BBQer Choice® Porcelain Grill Briquets. Superior heat transfer, Self Cleaning, Virtually indestructible, Kiln-Fired Porcelain, For all gas and electric grills, Covers approximately 300 square inches. Custom fit coverage for Modern Home Products WNK and TJK models but can also be used on Broilmaster and other grill models. Each disc measures 2-1/4" in diameter by 5/16" thick.

Set of 2 super heavy duty cooking grates for D3, P3, T3 and G3. 8mm solid stainless rod. Replaces set of 3 cast iron grates. Each grate measures 12-3/4" wide X 17" deep (including lip). Total set width is 25-1/2" Genuine Broilmaster Part.

Stainless Steel "Retract-A-Rack" folding warming rack. Fits P3/D3/T3/R3 Broilmaster models.  The rack surface area measures 23-1/2" long X 10-5/8" deep, when fully extended.  Genuine Broilmaster Part.

Broilmaster black plastic gas control knob. Measures 1-5/8" in diameter. Fits P3/P4/P5,SSR3,D3/D4/D5/D2 models. Sold individually.  Genuine Broilmaster Part.

Stainless steel heat and wind deflection shield. Fits all Broilmaster Grill Body Size 3, 4 and 5 models. Dimensions 8" X 16-3/4".  Genuine Broilmaster Part.

Spark box and electrode assembly for use with a "rotary spark generator". Used on P3, D3, P4, D4, P5 and D5 models. 15" long wire connects to the rotary spark generator with a "round" terminal connector.  Genuine Broilmaster Part.

"AA" electronic igniter spark generator. Includes push button cap, internal battery connection spring and mounting locknut. Features two output terminals on back of the module.  Genuine Broilmaster Part.

Spark box and electrode assembly for use with "electronic" spark generator B072218 (sold separately). Used on P3, D3, P4, D4, P5 and D5 models. 15" long wire connects to an "electronic" ignition module with a "female flat spade" terminal connector.  Genuine Broilmaster Part.

"Rotary" ignitor kit. Fits "P" Series, "D" Series prior to 2000. Includes "rotary" spark generator, knob, grounding wire, gas collector box electrode assembly with molded in 15" long wire, hardware and installation instructions.  Genuine Broilmaster Part.

"Electronic" ignitor kit. Fits "P" Series, "D" Series 2000-01. Includes "electronic" spark generator with push button cap, wires, gas collector box electrode assembly with molded in 15" long wire, hardware and installation instructions.  Genuine Broilmaster Part.

Push button battery cap with spring, for "AA" electronic ignition module. The cap features a soft rubber "push button" top. The diameter at the base of the cap measures 1-1/4".

Replacement "knob" for manual "rotary" igniter/spark generators with "round" knob shaft. Measures 1-3/4" in diameter and features "molded in" directional arrow graphics.  IMPORTANT: This is the "knob" only.

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

• (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.

Two outlet "rotary" spark generator with knob and mounting screws. Features 2 round post output terminals. This piezo style spark generator does not require a battery.

Single pole(one output terminal), rotary spark generator with knob. Distance, center to center, between the mounting screw holes measures 1-3/8". Mounting hardware, 2 screws, included.

All weather, grease resistant, coated control panel label for P3 and D3 models with electronic or push button ignition. Panel label has adhesive backing for easy installation. Label measures 2-3/4" X 19-7/8". Genuine Broilmaster Part. (Replaces old OEM part number B072686).

Broilmaster designed handle to lift heavy cast iron cooking grates.

Broilmaster premium custom fit full length grill cover.  Fits grills with "one side shelf".  Measures 54" left to right X 18" front to back  X 41" top to bottom.   Made from heavy duty PVC/Polyester material.  Genuine Broilmaster Part.

Broilmaster premium custom fit full length grill cover. Fits grills with "two side shelves".  Measures 61" left to right X 21" front to back  X 40" top to bottom..   Made from heavy duty PVC/Polyester material.  Genuine Broilmaster Part.

Broilmaster premium custom fit "Built-In-Kit" grill cover. Covers head and control panel. Made from heavy duty PVC/Polyester material.  Measures 32" left to right X 19" front to back X 17" top to bottom. Fits P3, T3 and R3 built-in models.  Genuine Broilmaster Part.

"Round" stainless steel "lid" temperature gauge with bezel. Overall diameter of the assembly, including the bezel, is 2-3/8", the diameter of the temperature gauge dial face itself is 1-13/16". Features a 3" long temperature probe with an adjustable screw end for recalibration and a dial face temperature range of 150 to 700 degrees (F). This assembly can be mounted to lids with a single or three mounting holes. Installation instructions and mounting hardware included. Genuine Broilmaster Part. (Replaces Older OEM Part DPP119)

Stainless Steel, rectangular temperature gauge. Measures 2-3/8" X 2-5/8". Temperature range 0-600 degrees. Features rear temperature probe and two mounting bolts with wing nuts. Center to center of the mounting bolts measures 1-1/2". Fits all Broilmaster models, Ducane Stainless Series and many other brands/models. Mounting hardware included.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

• 1 On/Off Ball Valve Quick Connect Fitting
• Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 3/8" Gas Line Quick Connect Fitting

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

Natural gas twin valve assembly. Does not include tube and orifice fittings. For Broilmaster natural gas models. Fits D4, P4, D3, P3, Ducks.  Genuine Broilmaster Part.

Propane twin valve assembly. Does not include tube and orifice fittings. For Broilmaster propane models. Fits D4, P4, D3, P3, Ducks.  Genuine Broilmaster Part.

Two orifice and tubing assemblies for natural gas supply. Orifice fittings are drilled to #48. For use with natural gas only. Fits P3, D3, S3, P4 and D4 models. Replaces old part numbers BCK151 and B100243. Genuine Broilmaster Part.

Two orifice and tubing assemblies for L/P (propane) gas. Orifice fittings are drilled to #55. For use with propane only. Fits P3, D3, S3, P4 and D4 models. Replaces old part numbers BCK152 and B100239. Genuine Broilmaster Part.

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

• (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
• Instruction sheet.

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.