The flash tube mounts between the burners to carry flame and ignition over to the adjacent burner. Designed to fit Charbroil 1" diameter main burner tubes that require a "screw mounted" carryover channel. (Burners are not included and are shown for display purposes). Flash tube length is 5-5/8" not including screw tabs. Screws included.

Stainless steel carry over tube for narrow 5/8' diameter burner tube. Tube channel measures 6" long. (this measurement does not include the mounting tabs). Fits Charbroil Professional, Signature, Commercial Series Tru-Infrared and Signature Series "Conventional" "3 and 4 burner models". Hardware, 2 cotter pins are included.  IMPORTANT: This carry over tube only fits Charbroils newer thin 5/8" diameter burner tubes.  Charbroil OEM Part.

Stainless steel carryover tube. Tube channel measures 4-1/2" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins.  Designed to fit Charbroil 1" diameter burner tube.

Stainless steel carryover tube. Tube channel measures 5-1/2" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins.  Designed to fit Charbroil 1" diameter burner tube.

15-7/8" long stainless steel tube burner. Narrow end which connects to the valve includes wire mesh spider guards. IMPORTANT: This burner uses a "screw" mounted style carry over tube.

15-7/8" long X 1" DIAMETER stainless steel main burner tube. Features indentations for clamp-on style igniter. The mounting flange end has a short 90 degree bend with a centered "round" mounting hole. Crossover stud screw located at mid-tube. Crossover tube mounting hardware included (1 cotter pin and 1 stud screw). Replaces part G527-2200-W1. Genuine Charbroil Part.

Burner rear support brace for 5/8" diameter main burner tubes, Charbroil Professional, Signature, Commercial and Performance Series "model years 2015 and Newer". (Tru-Infrared and Conventional).  "L" shaped brace is 1-5/8" wide and features two mounting bolt holes and vertical burner mounting tab.  Designed to support Charbroil 5/8" diameter burner tubes.  Hardware, (2 ea.) bolts, nuts and washers, included.

Charbroil newer generation, narrow 5/8" DIAMETER stainless steel main burner tube. Fits Charbroil, Professional, Signature, Commercial and Performance Series Tru-Infrared models (2015 and Newer).  Measures 14-3/4" long. Features a 90 degree bend and slotted mounting hole at the back end, carry over tube mounting stud screw and air mixture adjustment screw. Hardware, 2 cotter pins, included. Sold individually, more than one required.  Charbroil OEM Part.

16" long X 3-3/4" wide porcelain coated steel flame tamer. Features two raised mounting tabs at each end. Replaces older part numbers G501-0008-W1, 80006357 and 80003332. Genuine Charbroil Part.

Stainless Steel heat tent. Fits Charbroil Professional, Signature and Commercial Series Tru-Infrared models, 2015 and newer. Measures 15-1/4" long and 1-7/8" wide, at the base. Features heat vent holes at each end. Sold individually, more than one required.

Porcelain coated "Flame Tamer" or "Burner Shield". Features 32 vent holes in each end. Measures 3-3/4" wide X 16-3/8" long. ( width measurement is from edge to edge with the shield upside down and length is extreme tip to tip).

Stainless steel Tru-Infrared emitter grate (cooking grate bottom perforated piece).  Measures 7-5/8" wide X 18-3/8" front to back. This emitter grate is designed to pair with a cast iron cooking grate top piece, part # 80021357 (sold separately). This is the emitter grate only. Fits a variety of "4" Burner Charbroil Tru-Infrared models, pre 2015. More than one required, sold individually. IMPORTANT: Please measure your old parts to assure fit.  Replaces OEM Part 80021358.

Tru-Infrared stainless steel "Emitter Grate" (cooking grate bottom perforated piece). Fits a variety of Charbroil Professional, Signature and Commercial Series Tru-Infrared "4 burner models", 2015 and newer.  Measures 17-1/4" long X 10-1/8" wide. Designed to pair with cast iron cooking grate top, part CG120PCI (sold separately). This is the emitter grate only. IMPORTANT: Please measure your old parts to assure fit. Sold individually, more than one required. Charbroil OEM Part.

Stainless steel Tru-Infrared cooking grate "emitter tray" (bottom perforated piece). Measures 18-3/8" front to back X 7-5/8" wide. Fits a variety of Charbroil Tru-Infrared "4" burner models, pre 2015. This housing tray is designed to pair with a 7-1/2" wide cooking grate, see part ICG2121 (sold separately). IMPORTANT: Please measure your old parts to assure fit. This is the "emitter tray" only. More than one required, sold individually. Replaces Charbroil OEM Part 3485532.

Four section stainless steel cooking grate and emitter tray set. Includes 4 grates that measure 17" long X 7-1/2" wide (part ICG2121) and 4 emitter trays that measure  18-3/8" long X 7-5/8" wide (part IET5532). Measurement of each section with grate in tray is 7-5/8" wide X 18-3/8" front to back.  Total set width is 30-1/2".  Fits many Pre-2015 Charbroil Tru-Infrared 4 Burner Models.

Stamped stainless steel cooking grate set. Set includes 4 grate sections. Individual measurements of the sections are 7-3/4" wide X 18-3/8" front to back. Total width is 31".

Heavy duty 3 piece, matte finish cast iron cooking grate set. Each piece measures 18-1/8" front to back X 9 7/8" wide for a total set width of 29-5/8". Features side edge finger notches for easy installation and removal.

Infrared cast iron cooking grate "top piece". Measures 7-1/8" wide X 18-1/4" front to back. This grate is designed to fit onto a matching emitter tray, part # CG113SS (sold separately). This is the cast iron grate only. More than one required, sold individually. Fits a variety of Charbroil "4" Burner Tru-Infrared models, pre 2015. IMPORTANT: Please measure your old parts to assure fit before ordering. Charbroil Original Equipment. (Note: Emitter grate is not included; it is shown for display purposes only.)

Tru-Infrared "matte finish" cast iron cooking grate (top piece). Fits Charbroil Professional, Signature and Commercial Series Tru-Infrared "4 burner models", 2015 and newer. Measures 17" long X 9-1/2" wide. Designed to pair with emitter grate, part G533-2200-W1, sold separately. This is the cast iron top grate only. IMPORTANT:Please measure your old parts to assure fit. Sold individually, more than one required. Quality Aftermarket  Part, replaces parts G533-0009-W1 and G533-0009-W1A. (Note: Emitter grate is not included; it is shown for display purposes only.)

Infrared perforated stainless steel cooking grate. Measures 7-3/4" wide X 18-3/8" front to back. More than one required, sold individually. Original Charbroil Equipment.

Stainless steel infrared cooking grate. Measures 17" front to back X 7-1/2" wide. This grate is designed to pair with a housing emitter tray, see part IET5532 (sold separately). This is the cooking grate only. Fits a variety of Charbroil "4" Burner Tru-Infrared models, pre 2015. IMPORTANT: Please measure your old parts for accuracy More than one required, sold individually. Replaces Charbroil OEM Part 3482121.

Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame. (Replaces G350-0024-W1). Genuine Charbroil Part.

Control knob bezel with "Off/High/Low" graphics. Measures 3-1/8" in diameter. Features 2 elongated vertical and 2 large round horizontal mounting holes. Hardware included,2 screws and 2 lock washers. (Replaces parts, G354-0022-W1, G611-0073-W1 and 80006508)

Bezel for gas control knob. Measures 3-1/8" in diameter and features "High to Low" graphics. Fits Charbroil Advantage and Signature Series "Conventional" 2 burner models (2015-Newer) and Professional, Commercial and Performance Series "Tru-Infrared" models. Mounting hardware, 2 screws and lock washers, included.

Caster socket insert for rectangular steel tube legs. Surface dimension where the caster screws in is 1" X 2". Insert is 2-1/16" top to bottom. Accepts 7/16" threaded caster.

Locking ball bearing swivel caster with 2-7/8" diameter wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame construction. Attaches to leg frame with heavy gauge steel box flange. Fits a variety of Charbroil Professional, Signature, Commercial Series "Tru-Infrared" and Signature "Conventional" Series models (2015 and Newer).  Genuine Charbroil Part.

Non-locking ball bearing swivel caster with 2-7/8" diameter wheel. Sturdy steel frame construction. Attaches to leg frame with heavy gauge steel box flange.  Fits a variety of Charbroil Professional, Signature, Commercial Series "Tru-Infrared" and Signature Series "Conventional" models (2015 and Newer).  Genuine Charbroil Part.

Black plastic gas control knob for Charbroil Professional, Commercial, Signature, Performance Series "Tru-Infrared" and Signature Series "Conventional" models (2015 and Newer). Measures 2" in diameter and fits standard 1/4" "D" shaped valve stem. Features chrome top with Charbroil logo in black.

Main burner black plastic control knob with chrome top. Factory substitute for chrome knob with black plastic detail. Measures 2" in diameter.

Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.

Control knob bezel with infinite range graphics. Measures 3-1/8" in diameter. Features 2 elongated vertical (bottom hole cut horizontally) and 2 large round horizontal mounting holes. Hardware included (2 screws and 2 lock washers).  Replaces parts G515-0065-W1 and G519-0064-W1.  Genuine Charbroil Part.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire end.  IMPORTANT: This electrode only fits Charbroils 1" diameter burner tubes.

Electrode (for narrow 5/8" diameter burner tube) with 20" long wire for Charbroil Professional, Signature, Commercial Series "Tru-Infrared" 3 and 4 burner models and Advantage/Signature Series "Conventional" 2, 3 and 4 burner models, "2015 and newer".  Features gas collector box/electrode with burner mounting spring clamp and a 3" white ceramic electrode insulator with a 20" long molded in wire. The wire terminates with a female spade fitting.  IMPORTANT: This electrode only fits Charbroils newer thin 5/8" diameter burner tubes.

Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire end.  IMPORTANT: This electrode only fits Charbroils 1" diameter burner tubes.

Charbroil Surefire ignition switch kit. Kit includes one flush mount igniter switch push button and three sets of different length wires to accommodate many different models. Two wires per set in lengths of 10", 18" and 26". Installation instructions included. Charbroil OEM part.

Black plastic battery cap with internal spring, for "AA" ignition modules that have a remotely located push button switch. This is a hard cap, intended to secure the "AA" battery inside of the ignition module only. Measures 1-1/4" at the base.

5 output "AA"  electronic ignition module with black plastic battery cap. Features 2 input terminals on the back for the remote ignition switch and 5 output terminals for the electrodes.  IMPORTANT: This module requires a remote ignition switch, see part G515-0017-W7, sold separately.  Genuine Charbroil Part.

Electrode With Wire Collector For Main Burner

Rectangular slide out grease tray. Black powder coat finish. Pan measures 10-7/8" long X 5-3/4" wide, (measurement does not include handle).

Charbroil "top rounded" semi-circular temperature gauge. Measures 1-7/8" across bottom diameter. Features a 2-7/8" long rear temperature probe and a dial face range of 0-700 degrees.

7-3/4" X 4" grease pan for Charbroil Professional, Signature, Commercial Series "Tru-Infrared models" (2015-Newer), Advantage Series "Conventional" 6 burner, Signature Series "Conventional" (model years 2015-Newer) and a variety of Commercial Series conventional models.   Features a curled lip handle and 5-3/4" long side lip edges, for tray rail supports. Measures 7-3/4" long (including the handle) X 4" wide (including the lip edges).  Genuine Charbroil Part.

Round temperature gauge with 1-3/8" long temp probe. Fits Charbroil Professional, Signature, Commercial Series "Tru-Infrared" and Signature Series "Conventional" models, 2015 and newer.  Dial face measures 2-3/8" in diameter and has a temperature range of 150 to 650 degrees. Mounting wing nut included.  Genuine Charbroil Part.

Grease tray support rail for Charbroil Professional, Signature and Commercial Series Tru-Infrared models. "L" shaped rail measures 5-7/8" long.  Supports tray part,G416-0015-W1, sold separately.   Sold individually, more than one required.

Left and right side support rails for slide out grease tray. Each measures 19-1/4" long (measurement includes both mounting tabs).

Rectangular slide out grease catch pan. Gray powder coat finish. Pan measures 10-7/8" long X 5-3/4" wide, (Measurement does not include handle).

Charbroil "bottom rounded" semi-circular temperature gauge. Measures 1-7/8" diameter across top . Features a 3-3/4" long, rear temperature probe and a dial face range of 0-650 degrees.