CharBroil Advantage Series Grill Parts

14-1/2" long X  5/8" diameter  black porcelain coated steel main burner tube. Fits Charbroil Advantage Series "model years 2015 and newer".  5/8" OD tube features vented venturi end, 90 degree bend with center slotted mounting hole at the back end, cross over tube mounting stud screw and air mixture adjustment screw. Sold individually, more than one required. Charbroil OEM Part. (Replaces Part G432-8M00-W1)

17-3/4" long X 5/8" diameter stainless steel main burner tube. Fits Charbroil Performance models "2019 and newer". 5/8" OD tube features vented venturi end, slotted back-end tab (to accept the burner brace mount, see part G466-0047-W1, sold separately), carryover tube "mounting stud screw", air mixture adjustment screw and one carryover mounting cotter pin. Sold individually, more than one required. Charbroil OEM Part.

Charbroil "peg" style burner brace with cotter pin. The peg mounting brace measures 1/2" long and features a flat head, one flat cut side (to insure proper directional fit and prevent rotation) and a hole for the cotter pin.  Fits a variety of Charbroil Performance/Advantage conventional grill models. Genuine Charbroil Part.

15-1/4" long X 5/8" diameter stainless steel main burner tube. Fits Charbroil Performance models "2017 and newer". 5/8" OD tube features vented venturi end, 90 degree bend with 3/8" diameter mounting hole at the back end (to accept burner mount brace part G324-0007-W1, sold separately), carryover tube "mounting stud screw" and air mixture adjustment screw. Sold individually, more than one required. Charbroil OEM Part.

15-1/8" long X 5/8" diameter stainless steel main burner tube. Fits Charbroil Performance models "2017 and newer". 5/8" OD tube features vented venturi end, 90 degree bend with 3/8" diameter mounting hole at the back end (to accept burner mount brace part G324-0007-W1, sold separately), carryover tube mounting stud screw w/cotter pin and air mixture adjustment screw. Sold individually, more than one required. Charbroil OEM Part.

14-3/8" long X 1" diameter stainless steel tube burner. Features indentations for clamp-on style igniter and a carryover mounting stud screw. One cotter pin for mounting the carryover tube is included. The mounting flange end has a short 90 degree bend with a centered "slotted" mounting hole. Fits a variety of Charbroil Performance, Classic and Kenmore models. Genuine Charbroil Part.

Burner rear support brace for 5/8" diameter main burner tubes, Charbroil Professional, Signature, Commercial and Performance Series "model years 2015 and Newer". (Tru-Infrared and Conventional).  "L" shaped brace is 1-5/8" wide and features two mounting bolt holes and vertical burner mounting tab.  Designed to support Charbroil 5/8" diameter burner tubes.  Hardware, (2 ea.) bolts, nuts and washers, included.

Burner rear support brace for Charbroil Advantage Series model years 2015 and newer. "L" shaped brace is 1-5/8" wide and features two mounting bolt holes and vertical burner mounting tab. Designed to support Charbroil 5/8" diameter burner tube, part G432-8M00-W1 (sold separately).    Hardware, (2 ea.) bolts, nuts and washers, included.

17-3/4" long X 5/8" diameter stainless steel main burner tube. Fits Charbroil Performance and Advantage Series, 4, 5 and 6 burner models "years 2017 and newer".  5/8" OD tube features vented venturi end, 90 degree bend with center slotted mounting hole at the back end, carryover tube mounting stud screw, air mixture adjustment screw and one carryover mounting cotter pin.  Sold individually, more than one required. Charbroil OEM Part.

15-1/8" X 2-11/16 stainless steel "sear" burner for Charbroil Performance models, 2017 and newer. Measures 15-1/8" long (including the mounting bracket), the burner itself is 14-1/8" long. Features a spider/insect screen at the venturi end, reinforced tab with 2 screw holes for mounting the electrode, G555-5301-W1 (sold separately) and an attached "L" shaped mounting tab with a centered hole for receiving the burner mounting brace, G324-0007-W1 (sold separately). Genuine Charbroil Part.

14-1/8" long stainless steel "Sear Burner-Bar Burner". Measures 14/18" long X 2-5/8" wide. Features an attached electrode mounting bracket and drip shield, insect screen at the venturi end and a mounting peg on the underside of the burner. The distance from the end of the venturi pipe to the center of the mounting peg is 12". Fits many 6 burner Charbroil models, years 2011-2017. Genuine Charbroil Part.

Stainless steel "U" shaped burner tube.  Measures 26" long X 7" wide.  Features attached flame hole drip shields.  Note: This burner is not compatible with igniter components.  The original equipment is no longer available.  Quality aftermarket part.

Stainless steel heat tent. Fits a variety of Charbroil Performance/Advantage Series models (2017 and newer). Measures 15-1/2" long (including the mounting tabs) and 1-3/8" wide across the base. The tent length without the mounting tabs, measured along the bottom edge is 15-1/8". Features 2 mounting tabs at one end. Sold individually, more than one required. Genuine Charbroil Part.

Stainless steel heat tent. Fits a veriety of Charbroil Advantage Series and Performance Series models (2015 and newer). Measures 15-1/8" long, across the bottom (excluding mounting tabs) and 2" wide, at the base. Features 2 mounting tabs at one end and heat vent holes.  Sold individually, more than one required. Important: Please measure your existing parts to assure fit.

Porcelain coated vented heat tent. Measures 14-5/8" long (including end tabs) X 4-1/4" measured across the bottom.

Porcelain coated "Flame Tamer" or "Burner Shield". Measures 4-1/4" wide X 14-7/8" long. Features 16 vent holes in each end. (width measurement is from edge to edge with the shield upside down and length is extreme tip to tip including the mounting tabs).

Stainless steel heat tent. Fits a veriety of Charbroil Advantage Series 2, 4, and 6 burner models (2015 and newer). Measures 14-1/8" long, across the bottom (excluding mounting tabs) and 2" wide, at the base. Features 2 mounting tabs at one end and heat vent holes. Sold individually, more than one required. Important: Please measure your exisitng parts to assure fit.

Stainless steel heat tent. Fits a variety of Charbroil Advantage Series 4 burner models as well as other Charbroil Classic Duel Fuel models (2015 and newer). Measures 15-5/8" long, across the bottom edge (excluding mounting tabs) and 2" wide, at the base. Features heat vent holes and 2 mounting tabs at one end. Sold individually, more than one required. Important: Please confirm dimensions to assure fit.  Genuine Charbroil Part.

16-1/2" X 2" vented stainless steel heat tent. Fits a variety of Charbroil Performance/Advantage Series 4,5 and 6 burner models as well as other Charbroil models (2017 and newer). Measures 16-1/2" long, across the bottom edge (excluding mounting tabs) and 2" wide, at the base. Features 2 mounting tabs at one end. Sold individually, more than one required. Important: Please confirm dimensions to assure fit. Genuine Charbroil Part. (Replaces Part G470-0004-W1)

Stainless steel "rounded top" vented heat tent for Charbroil Performance models Sear burner, (2017 and Newer). Measures 15" long (excluding the mounting tabs) X 5-1/8" wide. Features two 5/8" long mounting tabs on one end. Overall length including the mounting tabs is 15-5/8". Genuine Charbroil Part.

Main burner flame carry over tube for Charbroil Advantage Series 2 burner models, "2015 and newer". The channel measures 7-3/8" long (excluding the mounting tabs) X 1" wide.  Designed to fit Charbroil 5/8" diameter burner tube.  Mounting hardware (cotter pins) "not" included.

Stainless steel flame carryover tube. Fits a variety of Charbroil Performance models "2017 and newer". Tube channel length measures 7-3/8" long. (This measurement does not include the mounting tabs). Designed to fit Charbroil 5/8" diameter burner tubes. Includes mounting hardware, 2 cotter pins. Charbroil OEM Part.

Stainless steel flame carryover tube. Fits a variety of Charbroil Performance/Advantage Series models, "2015 and newer". Tube channel measures 5" long. (This measurement does not include the mounting tabs). Designed to fit Charbroil 5/8" diameter burner tube. Includes mounting hardware, 2 cotter pins. Charbroil OEM Part.

Stainless steel flame carryover tube. Fits a variety of Charbroil Performance models "2017 and newer". Tube channel length measures 4-5/8" long. (This measurement does not include the mounting tabs). Designed to fit Charbroil 5/8" diameter burner tubes. Includes mounting hardware, 2 cotter pins. Charbroil OEM Part.

Stainless steel flame carryover tube. Fits Charbroil Advantage Series "2015 and newer". Tube channel measures 5-3/4" long. (This measurement is the tube length only, does not include the mounting tabs). Designed to fit Charbroil 5/8" diameter burner tube. Includes mounting hardware, 2 cotter pins. Charbroil OEM Part.

Stainless steel carryover tube. Tube channel measures 5-3/8" long. (this measurement is the tube channel length only, does not include the mounting tabs). Comes with 2 cotter pins. Designed to fit Charbroil 1" diameter burner tubes. Fits variety of  Kenmore, Thermos and Charbroil Performance and Classic models.

Stainless steel flame carryover tube. Fits a variety Charbroil models "2015 and newer" incuding Performance 5 Burner models. Tube channel measures 3-1/2" long. (This measurement does not include the mounting tabs).  Designed to fit Charbroil 5/8" diameter burner tube.  Includes mounting hardware, 2 cotter pins. Charbroil OEM Part.

Stainless steel flame carryover tube. Fits a variety of Charbroil Performance models "2017 and newer". Tube channel length measures 4" long. (This measurement does not include the mounting tabs). Designed to fit Charbroil 5/8" diameter burner tubes. Includes mounting hardware, 2 cotter pins. Charbroil OEM Part.

Stainless steel flame carryover tube. Fits Charbroil Advantage Series 4 and 6 burner models "2015 and newer". Tube channel measures 5" long. (This measurement does not include the mounting tabs).  Designed to fit Charbroil 5/8" diameter burner tube.  Includes mounting hardware, 2 cotter pins. Charbroil OEM Part.

Heavy duty, 2 piece "matte finish" cast iron cooking grate set. Each section measures 15" front to back x 12" wide. For a total set width of 24". Fits many Charbroil Advantage and Performance series models.

Heavy duty 3 piece cast iron cooking grate set, with porcelain coated matte finish. Two sections measures 12" wide x 15" front to back and the third "center" section measures 7-7/8" wide x 15" front to back. For a total set width of 31-7/8". Fits some Charbroil Advantage/Performance series models.

Single piece,porcelain coated "matte finish" cast iron cooking grate. Measures 16-7/8" front to back X 8-1/4" wide. Features "finger notch" on the sides for easy installation and removal. Fits a variety of Charbroil, Kenmore and many other brand/models. more than one required.

Single piece matte finish cast iron cooking grate. Fits Charbroil Advantage Series "2" burner models, "2015 and newer" as well as many other brands/models. Measures 16-7/8" front to back X 8-1/2" wide. Sold individually, more than one required. Charbroil OEM Part.

16-15/16" X 6-3/4" porcelain coated Charbroil Performance cooking grate, T120. Features Charbroil "Amplifire" cooking technology for even heat and no flare-ups. Measures 16-15/16" front to back X 6-3/4" wide. Fits a variety of 2017 and newer Charbroil Performance models. More than one required, sold individually.

17" X 10-7/16" porcelain coated Charbroil Performance cooking grate, T180. Features Charbroil "Amplifire" cooking technology for even heat and no flare-ups. Measures 17" front to back X 10-7/16" wide. Fits a variety of 2017 and newer Charbroil Performance models. More than one required, sold individually.

Single piece matte finish cast iron cooking grate. Fits Charbroil Advantage Series "3" burner models, "2015 and newer" as well as many other brands/models. Measures 16-7/8" front to back X 8-1/4" wide. Sold individually, more than one required. Charbroil OEM Part.  Replaces Part G431-0042-W1.

16-7/8" X 7" single piece matte finish cast iron cooking grate. Fits Charbroil Performance/Advantage Series, "2017 and newer", as well as many other brands/models. Measures 16-7/8" front to back X 7" wide. Features "finger notch" for easy removal and installation as well as providing access for manual lighting of the burners. (This grate is commonly used in combination with a wider grate, part G426-0005-W1, sold separately). Sold individually, more than one required. Charbroil OEM Part.

16-7/8" X 10-1/2" single piece matte finish cast iron cooking grate. Fits Charbroil Performance/Advantage Series, "2017 and newer", as well as many other brands/models. Measures 16-7/8" front to back X 10-1/2" wide. Features "finger notch" for easy removal and installation as well as providing access for manual lighting of the burners. (This grate is commonly used in combination with a narrower grate, part G426-0004-W1, sold separately). Sold individually, more than one required. Charbroil OEM Part.

Porcelain coated "Matte Finish" cast iron cooking grate. Measures 16-7/8" front to back X 9-3/8" wide. Features finger notches on each side for easy removal/installation. Fits Charbroil Advantage 6 burner models (2015 and newer), as well as many other brands/models.

16-7/8" X 8-3/4" single piece matte finish cast iron cooking grate. Fits Charbroil Advantage Series "4" burner models, "2015 and newer" as well as many other brands/models. Measures 16-7/8" front to back X 8-3/4" wide. Sold individually, more than one required. Charbroil OEM Part.

Single piece 1/4" solid rod stainless steel cooking grate. Fits Charbroil Advantage Series "4" burner models, "2015 and newer" as well as many other brands/models. Measures 16-15/16" front to back X 8-5/8" wide. Sold individually, more than one required. Charbroil OEM Part.

18-1/4" front to back X 9-1/4" wide porcelain coated cast iron cooking grate.  Features "finger notches" on both sides for easy installation and removal.  Fits Charbroil Performance/Advantage Series 4, 5 and 6 burner models, 2017 and newer. Sold individually, more than one required. Genuine Charbroil Part.

18-1/4" front to back X 6-1/2" wide porcelain coated cast iron cooking grate.  Features "finger notches" on both sides for easy installation and removal.  Fits Charbroil Performance/Advantage Series 4, 5 and 6 burner models, 2017 and newer. Sold individually, more than one required. Genuine Charbroil Part.

16-15/16" X 10-1/2" single piece 1/4" diameter solid stainless steel rod cooking grate. Fits Charbroil Performance/Advantage Series "2017 and newer" as well as many other brands/models. Measures 16-15/16" front to back X 10-1/2" wide. Sold individually, more than one required. Charbroil OEM Part.

Attractive black and chrome heat/gas Control Knob measures 2-5/16in. (dia. at base). Replaces an existing damaged, worn or broken heat control knob on bbq gas grills. Fit Kit included to secure knob to  6mm or 8mm “D” shaped gas valve stems at the proper stand-off height.

What’s Included:

• 1 Chrome and Black Gas Control Knob (plastic)
• 1 Fit Kit for proper installation (6 pc.)

Features:

• Attractive and easy-to-clean chrome heat control knob
• Fits 6mm or 8mm “D” shaped gas control valve stems
• 6 inserts to insure proper mounting to a variety of BBQ Gas Grills

Fitment:

• Fit Kit includes 6pc. inserts that allow for selecting knob "ON/OFF" position and a set screw with locking pressure tab.
• Variety of insert lengths for proper stand-off height: Flush, 1/4in., 1-1/2in. Inserts can be trimmed to your desired length for a professional fit.
• Click PDF in preview window for assembly instructions.

Plastic control knob with chrome front and soft rubber grip. Factory sub for part number 7000309. Fits a variety of Performance/Advantage Series and Patio Bistro Tru-Infrared models. Measures 2-3/8" in diameter.

Control knob bezel with center hole and slotted mounting hole located directly above center. Bezel is 2-7/8" in diameter.

Caster socket insert for rectangular stainless steel legs. Surface dimension where the caster screws in is 1" X 2". Insert is 2-1/16" top to bottom. Accepts 7/16" threaded caster.

Black plastic main burner control knob for Charbroil Performance/Advantage Series models, "2017 and newer". Measures 2" in diameter and features molded-in Charbroil flame emblem and knob position indicator on the top.  Genuine Charbroil Part.

2" diameter main burner control knob for Charbroil Performance Series models, (2017 and newer). Chrome plastic knob with molded-in Charbroil Flame emblem, directional pointer and 1/4" diameter "D" shaped opening for valve stem shaft. Genuine Charbroil Part.

Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame. (Replaces G350-0024-W1). Genuine Charbroil Part.

Bezel for gas control knob. Measures 3-1/8" in diameter and features "High to Low" graphics. Fits Charbroil Advantage and Signature Series "Conventional" 2 burner models (2015-Newer) and Professional, Commercial and Performance Series "Tru-Infrared" models. Mounting hardware, 2 screws and lock washers, included.

Bezel for gas control knob. Measures 3-1/8" in diameter and features "Off/High to Low" graphics. Fits a variety of Charbroil Performance models (2017 and newer). Genuine Charbroil Part.

3-1/16" diameter main burner LED control knob bezel for Charbroil Performance grill models that feature LED illuminated control knobs. Features Off/Hi/Low adjustment graphics, circuit board with 4 LEDs for ambient light and a two prong/post plug to accept the wire connection from the lighted controls wire harness.

7" diameter black plastic wheel. Features a 5/16" diameter axle hole, 1-3/4" long axle hub and 1-7/8" wide tire tread. Fits a variety of Charbroil, Kenmore and many other Brands/Models.  Sold individually.  Genuine Charbroil Part.

Main burner control knob for Charbroil Advantage Series 2 burner models, (2015 and newer). All black plastic knob with molded on Charbroil Flame emblem for direction pointer and "D" shaped opening for valve shaft.

Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.

Control knob bezel with infinite range graphics. Measures 3-1/8" in diameter. Features 2 elongated vertical (bottom hole cut horizontally) and 2 large round horizontal mounting holes. Hardware included (2 screws and 2 lock washers).  Replaces parts G515-0065-W1 and G519-0064-W1.  Genuine Charbroil Part.

2" diameter main burner control knob for Charbroil Performance Series models, (2017 and newer). Black plastic knob with red Charbroil Flame emblem, directional pointer and 1/4" diameter "D" shaped opening for valve stem shaft. Genuine Charbroil Part.

Chrome plastic gas control knob. Measures 2" in diameter. The knob mounting hole fits a 1/4" valve stem.

Chrome/plastic control knob bezel. Measures 2-3/4" in diameter and features 4 slotted mounting screw openings and molded in knob position impressions "Off/High to Low". Fits Advantage Series model years 2015 and newer as well as many other older Charbroil models.  Mounting hardware is "not" included.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

• (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

Three output "AA" electronic ignition module with push button battery cap. Features 3 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.

Four output "AA" electronic ignition module with push button battery cap. Features 4 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.

Snap-In ignitor push button for units without side burners. (Single pole. Uses one wire.) Wire not included.

"Twist and lock" mounting style rubber push button/battery cap for "AAA" battery sized electronic ignition modules.

Single output "AAA" electronic ignition module. Features a push button/battery cap with spring, module mounting lock ring/jam nut and one male spade output terminal. Genuine Charbroil Part.

Electrode (for narrow 5/8" diameter burner tube) with 15" long wire for Charbroil Performance "Conventional" models, (2017 and newer). Features vented gas collector box/electrode with burner mounting spring clamp and a 3" long white ceramic insulator with a 15" long molded in wire. The wire terminates with a female spade fitting. IMPORTANT: This electrode only fits Charbroil 5/8" diameter burner tubes.

Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire end.  IMPORTANT: This electrode only fits Charbroils 1" diameter burner tubes.

Two output "AA" electronic ignition module with push button battery cap. Features 2 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Fits Charbroil Performance, Classic and Kenmore models as well as many other brands/models.

Plastic battery cap with spring and soft push button top for "AAA" ignition modules. Diameter of the cap at its base is 1".

Main burner collector box and electrode with 14" long molded in wire. Features burner mount spring clamp and female spade connector end (for connecting to an electronic ignition module). Fits Charbroil Performance/Advantage 4, 5 and 6 burner models, "2017 and newer". Designed to fit a 5/8" diameter burner tube. Genuine Charbroil Part.

Electrode with wire for Advantage Series 6 burner models (2015 and Newer). Features attached gas collector box and burner mounting spring clamp. 3" white ceramic electrode insulator has a 36" long molded in wire. The wire terminates with a female spade fitting.  Designed to fit Charbroil 5/8" diameter burner tube.

Electrode (for narrow 5/8" diameter burner tube) with 20" long wire for Charbroil Professional, Signature, Commercial Series "Tru-Infrared" 3 and 4 burner models and Advantage/Signature Series "Conventional" 2, 3 and 4 burner models, "2015 and newer".  Features gas collector box/electrode with burner mounting spring clamp and a 3" white ceramic electrode insulator with a 20" long molded in wire. The wire terminates with a female spade fitting.  IMPORTANT: This electrode only fits Charbroils newer thin 5/8" diameter burner tubes.

Two output "AAA" electronic igniter spark generator. Includes push button cap with internal battery connection spring and module mounting locknut. Features two output terminals on back of the module. Fits a variety of ProFire models, Charbroil Advantage Series 2, 4 and 6 burner modlels (2015 and newer), older Charbroil Classic models as well as many other brands/models. Genuine Charbroil Part. (Replaces Part F401-0012-W1).

Electrode with wire and collector box for 1" DIAMETER main burner tube. Overall length (wire and electrode/collector box) is 39-1/4". Features "push-on" mounting clamp for easy installation and female spade connector on wire end.  IMPORTANT: This electrode only fits Charbroils 1" diameter burner tubes.

Electrode for sear burner. Features a vented collector box with mounted electrode and mounting tab. Fits a variety of Charbroil Performance "conventional" models. The electrode has a 3-1/4" long white ceramic insulator and a molded-in 32" wire with a flat female spade terminal end fitting. Two mounting screws included. Genuine Charbroil Part.

Electrode with wire for sear burner (part G651-1100-W1). Features an "L" shaped electrode tip, 3" long ceramic insulator and a 20" long molded-in wire that terminates with a female spade terminal fitting. Commonly used with Charbroil sear burner part G651-1100-W1. Genuine Charbroil Part. Burner not included, shown for display purposes only.

Three output "AAA" electronic ignition module with push button battery cap. Features 3 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Fits a variety of Charbroil" conventional" Performance models as well as many other brands/models.

20" igniter wire. Features flat female spade connectors on both ends.

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

• (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.

Electrode (for narrow 5/8" diameter burner tube) with 10" wire for Charbroil Professional and Commercial Series Tru-Infrared "2 burner models". Features attached gas collector box with burner mounting spring clamp. 2-1/2" white ceramic electrode insulator has a 10" long molded in wire. The wire terminates with a female spade fitting.  IMPORTANT: This electrode only fits Charbroils newer thin 5/8" diameter burner tubes.  Charbroil OEM Part.  (Replaces OEM Part G309-0M01-W1)

Charbroil universal grease drip cup and hanging clip. Cup measures 3-3/4" in diameter. Features an aluminum cup with a steel hanging clip.

Lid temperature gauge for Charbroil Advantage Series 2 burner models, "2015 and newer". Dial face measures 1-7/8" in diameter and has a temperature range of 150 to 650 degrees. Features a 1-1/4" long temp probe and mounting wing nut.

7-3/4" X 4" grease pan for Charbroil Performance models (2017 and Newer).   Features a curled lip handle and 3-3/4" long side lip edges, for tray rail supports. Measures 7-3/4" long (including the handle) X 4" wide (including the lip edges).  Genuine Charbroil Part.

7-3/4" X 4" grease pan for Charbroil Professional, Signature, Commercial Series "Tru-Infrared models" (2015-Newer), Advantage Series "Conventional" 6 burner, Signature Series "Conventional" (model years 2015-Newer) and a variety of Commercial Series conventional models.   Features a curled lip handle and 5-3/4" long side lip edges, for tray rail supports. Measures 7-3/4" long (including the handle) X 4" wide (including the lip edges).  Genuine Charbroil Part.

Bezel for gas control knob. Measures 3-1/8" in diameter and features "Off/High to Low" graphics. Fits a variety of Charbroil Performance models (2017 and newer). Genuine Charbroil Part.

Round temperature gauge with 1-1/4" long temp probe. Fits a variety of Charbroil Conventional grill models. Dial face measures 1-7/8" in diameter and has a temperature range of 50 to 700 degrees. Mounting wing nut and washer included. Genuine Charbroil Part.

2-3/8" diameter bezel for lid temperature gauge. Features center hole for temperature gauge probe and a mounting tab to prevent the bezel from rotating on the grill lid.  Fits a variety of Charbroil Performance/Advantage models.  Genuine Charbroil Part.

Round lid temperature gauge for Charbroil Advantage Series 4 and 6 burner models, "2015 and newer" and Tru-Infrared Performance 2 Burner models. 1-7/8" diameter dial face with temperature range of 150-650 degrees. Features a 1-1/4" long temp probe with mounting wing nut included. Charbroil OEM Part.

Lid temperature gauge for Charbroil Performance "conventional" models, "2017 and newer". Dial face measures 1-7/8" in diameter and has a temperature range of 150 to 650 degrees. Features a 1-1/4" long temperature probe and mounting wing nut.  Genuine Charbroil Part.