DCS Grill Parts

Rectangular cast iron burner. Burner measures 20-1/2" total length front to back (including shutter extension) X 6-1/4" wide. Fits many 36", 48" DCS and Lynx model grills. Includes air mix shutter mounted as shown. Quality Aftermarket Part. Replaces DCS OEM Part 210348. 

Rectangular cast iron burner. Burner measures 16" total length front to back (including shutter extension) X 6-1/4" wide. Fits a variety of DCS and LYNX models. Includes air/fuel mixture shutter, mounted as shown. Quality Aftermarket Part.

Stainless steel tube burner measures 18" tip to tip. Features an ignitor electrode mounting bracket attached (Electrode not included), and adjustable air shutter with spider screen. Burner mounting flange bends up at a 90 degree angle as shown.  Quality aftermarket part.  Replaces DCS OEM Part 213467.

Fits models: 27DBQ, 27DBQR, 27DBR, 27DSBQ, 27DSBQR, 27FSBQ, 27FSBQR, 36DBQ, 36DBQR,  36EBQAR, 48DBQ, 48DBQAR, 48EBQR, 36EBQAR, BGA27-BQ, BGA27-BQR, BGA36-BQARL, BGA36-BQARN, BGA48-BQARL, BGA48-BQARN, BGA48-BQRL, BGA48-BQRN, BGB30-BQRL, BGB30-BQRN,BGB36-BQARL, BGB36-BQARN, BGB48-BQRL, BGB48-BQRN, DCS36-BQARSN, DCS36-BQASN, DCS36-BQRSN, DCS36-BQSN,DCS36A-BQAN, DCS36A-BQARN, DCS36A-BQN, DCS36A-BQRN,DCS36E-BQARN, DCS48-BQARSN, DCS48-BQASN, DCS48-BQRSN, DCS48-BQSN, DCS48A-BQAN, DCS48A-BQARN, DCS48A-BQN, DCS48A-BQRN, DCS48E-BQARN

Heavy duty stainless steel center feed U-shaped tube burner. Measures 19-1/4" total length front to back including the center tube and is 6" wide. Fits a variety of  DCS models and also some Charmglow models. Quality Aftermarket Part.  Replaces DCS OEM Part 210617P.

Stainless steel wood chip tray. Measures 21" long X 2-1/2" wide. The length measurement does not include the curled lip that acts as a handle. The dimensions of the handle flange face are 1-11/16" x 3-1/2". NOTE: In some older DCS grills the opening for the chip tray is larger than the handle flange face of this part.

Nine ceramic radiant rods/tubes for DCS grills. Each tube measures 9-1/2" long. Pack of 9. (Radiant tube holder not included, shown for display purposes only). Made in USA.

Ceramic tube radiants 3-pack for DCS grills. Tubes measure 9-1/2" long. Price is per package of three.  Radiant tube holder tray not included, shown for display purposes only.  Also available in 9-pack, see part CR9PK. Made in USA.

19" X 9-1/2" DCS stainless steel heat shield. Fits models 24, 27DBQR, 36, 36 Series, 36ABQ, 36ABQR, 36ABQAR, 36BQ, 36BQAR, 36BQR, 48, 48 Series, 48BQ, and 48BQR. (Matches to the 23601, 20-1/2" cast iron burner). Quality Aftermarket Part. Replaces DCS OEM Part 213949. Burner is for display purpoases only; not included.

16-1/2" X 10-5/8" DCS Stainless Steel Heat Shield. Quality Aftermarket Part.  Replaces DCS  OEM Part 213948. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. Burner is for display purposes only; not included.

Stainless steel radiant tube holder for DCS. Measures 18-5/8" front to back X 9-7/8" wide. This tray holds eighteen 9-1/2" ceramic radiant tubes. (Radiant tubes not included and are shown for display only, for ceramic tubes see parts DCSCT and CR9PK). Quality Aftermarket Part, Made in USA.  Replaces DCS OEM Part 214081P.

DCS "Tray and Tube" Complete Kit. Includes one stainless steel holder tray and "18" ceramic tubes. The tray measures 18-5/8" front to back X 9-7/8" wide and each ceramic tube is 9-1/2" long. Fits many DCS outdoor grills, including DCS27D/DCS27F, 36" and 48" models (that use 9-1/2" long ceramic tubes) with model numbers beginning BGA, BGB, BGC and many other 36" and 48" DCS models. Please verify dimensions. High Quality Aftermarket Part.  Minor assembly required.  (Replaces OEM Part 214081P With 18 Ceramic Tubes).  All components of this kit are Made in USA.

18-1/2" X 12-3/4" stainless steel cooking grate. Constructed of 5/16" diameter solid stainless steel rod. Sold individually.

Two piece stainless steel rod, cooking grate set. Each section measures 18-1/2" front to back X 12-3/4" wide, for a total set width of 25-1/2". Made of 5/16" diameter solid stainless steel rod.

Stainless steel cooking grate. Measures 20-1/2" front to back X 10-7/16" wide. Made of 5/16" diameter, solid stainless steel rod. Fits DCS 36 and 48 Series as well as many other brands/models. More than one required. Also available in a 3 piece set, see part CG79SS4-SET.  Replaces OEM Part 212408P.

Three section stainless steel cooking grate set. Made of 5/16" stainless solid rod. Each section measures 20-1/2" front to back X 10-7/16" wide, for a total set width of 31-5/16". Fits DCS 36 and 48 Series as well as many other brands and models.  Replaces "3" of OEM Part 212408P.

Single piece, stainless steel cooking grate. Measures 19-1/2" front to back X 12-3/4" wide. Made of 5/16" diameter, solid stainless steel rod. Fits a variety of DCS 27 Series and many other brands/models.  Replaces DCS OEM Part 212427P.  Also available in a 2 piece set, see part CG80SS-2.

Two section cooking grate set, made of 5/16" stainless steel solid rod. Each section measures 19-1/2" front to back X 12-3/4" wide, for a total set width of 25-1/2". Quality Aftermarket Part.  Replaces two of OEM Part 212427P.

Stainless steel warming rack. Measures 24-1/8" X 6-5/16". Constructed of 304 grade solid stainless steel rod. Fits DCS model: BGA-26BQN. Quality Aftermarket Part. Replaces DCS OEM Part 212921.

Stainless steel warming rack. Measures 31" X 7-3/4". Constructed of 304 grade solid stainless steel rod. Fits DCS models: BGA36-BQAR, BGA36-BQARL, BGA36-BQARN, BGB36-BQAR, BGB36-BQARN, BGB48-BQRN, DCS36-BQARN, DCS36D-BQARN, DCS36E-BQARN, DCS48-BQRN, DCS48D-BQAN, DCS48D-BQARN, DCS48D-BQRN, DCS48E-BQRN, DCS48E-BQRL, DCS48DS-BQA, DCS48DS-BQAR.  Quality Aftermarket Part.  Replaces DCS OEM Part 214030.

DCS brass gas control valve (for main burners). The valve has a 1-3/16" long control knob stem. This valve fits many BG, BGA and BGB models. . IMPORTANT: Does not come with an orifice. It is recommended to re-use the old orifice. 

DCS brass gas control valve with ignition Micro Switch attached (for main burners). The valve has a 7/8" long control knob stem. Spring loaded micro switch features two flat spade terminals for lead wires from the ignition wire harness. This valve fits the following DCS models, BGC48-BQAR, BGC48-BQR, BGC36-BQAR, BGC36-BQR, BH1-48RS, BH1-48R, BH1-36R, BH1-30R. IMPORTANT: Does not come with an orifice. It is recommended to re-use the old orifice.

Attractive black and chrome heat/gas Control Knob measures 2-5/16in. (dia. at base). Replaces an existing damaged, worn or broken heat control knob on bbq gas grills. Fit Kit included to secure knob to  6mm or 8mm “D” shaped gas valve stems at the proper stand-off height.

What’s Included:

• 1 Chrome and Black Gas Control Knob (plastic)
• 1 Fit Kit for proper installation (6 pc.)

Features:

• Attractive and easy-to-clean chrome heat control knob
• Fits 6mm or 8mm “D” shaped gas control valve stems
• 6 inserts to insure proper mounting to a variety of BBQ Gas Grills

Fitment:

• Fit Kit includes 6pc. inserts that allow for selecting knob "ON/OFF" position and a set screw with locking pressure tab.
• Variety of insert lengths for proper stand-off height: Flush, 1/4in., 1-1/2in. Inserts can be trimmed to your desired length for a professional fit.
• Click PDF in preview window for assembly instructions.

Replacement "knob" for manual "rotary" igniter/spark generators with "round" knob shaft. Measures 1-3/4" in diameter and features "molded in" directional arrow graphics.  IMPORTANT: This is the "knob" only.

Igniter adapter wire, converts flat female spade end fitting  to "round" end fitting.  Measures 2-3/4" long with female round connection on one end and a flat male spade connection on the other.  Perfect round end fit for rotary spark generators.

47" Replacement wire with flat female spade connectors on each end. One end black shrink wrapped and the other with a square plastic protector.

20" long igniter adapter wire. Features a "female flat spade" connector fitting on one end and a "male round"connector fitting on the other end.

Igniter adapter wire, converts round female end fitting to "flat" female spade end fitting. Measures 2-3/4" long with male round connector on one end and a flat female spade connector on the other.

DCS "Left" collector box and electrode with 15" molded in wire.  Fits older DCS models that requre a "left" and "right" collector box.  Features "left side specific" collector box, 90 degree bend electrode tip with 2-1/2" long ceramic insulator and a 15" molded in wire that terminates with a "round" connector fitting.  Replaces DCS OEM part number 214269.

DCS "Right" collector box and electrode with 15" molded in wire.  Fits older DCS models that require a "left" and "right" collector box.   Features "right side specific" collector box, 90 degree bend electrode tip with 2-1/2" long ceramic insulator and a 15" molded in wire that terminates with a "round" connector fitting. Replaces DCS OEM Part number  214268.

Replacement "knob" for manual "rotary" igniter/spark generators with "round" knob shaft. Measures 1-3/4" in diameter and features "molded in" directional arrow graphics.  IMPORTANT: This is the "knob" only.

Electrode with wire includes wire insulating jacket. The ceramic portion hidden by the insulating wire is 3-3/4" long. Electrode tip is 1-7/8" to the tip where is bends 90 degrees. Wire length is 23-1/2" and terminates to a flat spade connector.

DCS electrode and enclosed collector/spark box assembly kit, for use with either Rotary Spark Generators or Electronic Ignition Modules (by utilizing the included adapter wire).  The kit includes one stainless steel collector/spark box, one electrode/white ceramic insulator with a 29-1/2" long molded-in wire and a 3" long adapter wire.  The adapter wire allows for conversion to a female spade terminal end, for connecting to an electronic ignition module.  Minor assembly required.  Replaces DCS OEM Part 211718.

20" igniter wire. Features flat female spade connectors on both ends.

DCS main burner ignition electrode with 41-1/2' long wire and enclosed collector/spark box assembly,for use with "electronic ignition modules"..  Extra long wired length enables "reach" for the electrode located farthest away from the electronic ignition module on 48" models.   The assembly includes one stainless steel collector/spark box and one electrode with a 41-1/2" long molded in wire and white ceramic insulator.  The wire has a female flat spade terminal connector end (for connecting to electronic ignition modules).

DCS bracketed electrode assembly. The electrode has a molded in 15 inch wire with round connector and is mounted under the bracket with the electrode tip bent 90 degrees into the spark box. Bracket measures 3" long X 1" wide.

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

• (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.

DCS Eltec 18351 electronic spark generator and push button. Generator has 9V battery terminals mounted on side. Six output terminals plus two input terminals for the push button are located on the back.  Replaces DCS OEM Part 212334P.

DCS Eltec 4-output electronic spark generator and push button. Generator has an enclosure for a 9V battery on the back side. Features four output terminals plus two input terminals for the push button switch.  Replaces DCS OEM Part 212333P.

Remotely located "push button switch" for DCS electronic ignition modules, IGEIB12B and IGEIB14B (sold separately). Features two flat male spade terminals for wire connection to the ignition module. If replacement wires are needed for the push button, see part IG43B. Mounting hardware, one lock washer and lock ring nut, included.

Single pole(one output terminal), rotary spark generator with knob. Distance, center to center, between the mounting screw holes measures 1-3/8". Mounting hardware, 2 screws, included.

19in. long ignition wire with one end being a larger 1/4in. female spade terminal connector, and at the other end a smaller 1/8in. female flat spade terminal connector. Features clear plastic terminal protectors. Used for spark generator to electrode connections and electronic ignition module to push button switch connections.

Is your spark loosing juice? Check your ignition wires for any visible signs of damage. Look for fraying, cuts, or breaks in the wire insulation, or the wire itself. Check for any corrosion or rust on the connectors or terminals. Look for areas where the wire may have become worn along its path and is “shorting out” on the grill body or other component.  Test Continuity: Using a multimeter set to measure continuity or resistance. Touch one probe to each end of the wire, and if there's continuity, the multimeter should display a low resistance value (usually close to zero ohms). If there's no continuity or a high resistance value, it indicates a break in the wire.

Includes:

• (1) 19in. long ignition wire with a 1/8in. female spade connector and a 1/4in. spade connector with terminal covers.

Fitment:

• This wire fits Alfresco spark generator to electrode connections and DCS electronic ignition module to push button switch connections, but may also work for a variety of other Brands and Models.
• Fits Viking Models: DVGBQ4103RT, DVGBQ4122RT, DVGBQ5304RT, DVGBQ5323RT, VGBQ4103RT, VGBQ1422RT, VGBQ5304RT, VGBQ532T, VGIQ410, VGIQ5323RT

Stainless steel wood chip tray. Measures 21" long X 2-1/2" wide. The length measurement does not include the curled lip that acts as a handle. The dimensions of the handle flange face are 1-11/16" x 3-1/2". NOTE: In some older DCS grills the opening for the chip tray is larger than the handle flange face of this part.

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

• 1 On/Off Ball Valve Quick Connect Fitting
• Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 3/8" Gas Line Quick Connect Fitting

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
• Instruction sheet.

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.