9-1/2" Ceramic Rods For DCS Grills, Pack Of 9

Burner Components Burner Shields, Ceramic Rods, Trays, Heat Plates Cooking Grates Gas Control Valves Grill Exterior Ignitor Components Random Parts Regulators and Hoses

grill parts: 9-1/2" Ceramic Rods For DCS Grills, Pack Of 9

DCS grill parts: 9-1/2" Ceramic Rods For DCS Grills, Pack Of 9 (image #1)

DCS grill parts: 9-1/2" Ceramic Rods For DCS Grills, Pack Of 9 (image #2)

DCS grill parts: 9-1/2" Ceramic Rods For DCS Grills, Pack Of 9 (image #3)

DCS grill parts: 9-1/2" Ceramic Rods For DCS Grills, Pack Of 9 (image #4)

9-1/2" Ceramic Rods For DCS Grills, Pack Of 9

Item# CR9PK

IN STOCK

$32.50

Nine ceramic radiant rods/tubes for DCS grills. Each tube measures 9-1/2" long. Pack of 9. (Radiant tube holder not included, shown for display purposes only). Made in USA.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

Qty:

Frequently Bought With This Part

Burner Components | DCS

Parts for DCS Grills: Rectangle Cast Iron Burner - 20-1/2in. x 6-1/4in. - (DCS, GE Monogram, Kirkland, Viking)

Rectangle Cast Iron Burner - 20-1/2in. x 6-1/4in. - (DCS, GE Monogram, Kirkland, Viking)

Item# CIDCS-LG

This premium aftermarket cast iron burner is built by Modern Home Products (MHP)—a name trusted for quality and durability. Designed to fit select Dynamic Cooking Systems (Replaces DCS OEM Part 210348), GE Monogram, Kirkland Signature, and some Viking...

In Stock

Retail: $158.20

$99.97

Add

Parts for DCS Grills: Rectangle Cast Iron Burner - 16in × 6¼in - (DCS, Kirkland Sig, Lynx)

Rectangle Cast Iron Burner - 16in × 6¼in - (DCS, Kirkland Sig, Lynx)

Item# CIDCSLX

This stout, 16" × 6¼" cast-iron burner—CIDCSLX—is the heart of resurrecting your aging or floundering grill. Built to the legendary specs of early DCS units, it’s a heavy-duty, budget-savvy replacement that...

In Stock

$70.66

Add

Parts for DCS Grills: 18" Stainless Steel Tube Burner (Replaces OEM Part 213467)

18" Stainless Steel Tube Burner (Replaces OEM Part 213467)

Item# DCST1

In Stock

Retail: $27.50

$21.79

Add

Parts for DCS Grills: U-Tube Burner - Stainless Steel -19-3/8 x 6in. - (Replaces DCS Part 210617P)

U-Tube Burner - Stainless Steel -19-3/8 x 6in. - (Replaces DCS Part 210617P)

Item# DCSU1

DCS Heavy duty stainless steel center feed U-shaped tube burner for Dynamic Cooking Systems grills. Measures 19-3/8in. total length front to back including the center tube and is 6in. wide. Fits a variety of DCS models and also some Charmglow...

In Stock

Retail: $145.10

$105.99

Add

Burner Shields, Ceramic Rods, Trays, Heat Plates | DCS

Parts for DCS Grills: DCS Slide In Wood Chip Tray

DCS Slide In Wood Chip Tray

Item# 214331

Stainless steel wood chip tray. Measures 21" long X 2-1/2" wide. The length measurement does not include the curled lip that acts as a handle. The dimensions of the handle flange face are 1-11/16" x 3-1/2". NOTE: In some older DCS grills...

In Stock

Retail: $82.43

$43.99

Add

Parts for DCS Grills: 9-1/2" Ceramic Rods For DCS Grills, Pack Of 9

9-1/2" Ceramic Rods For DCS Grills, Pack Of 9

Item# CR9PK

Nine ceramic radiant rods/tubes for DCS grills. Each tube measures 9-1/2" long. Pack of 9. (Radiant tube holder not included, shown for display purposes only). Made in USA.

In Stock

$32.50

Add

Parts for DCS Grills: 9-1/2" Ceramic Tube Radiants, Pack of 3.

9-1/2" Ceramic Tube Radiants, Pack of 3.

Item# DCSCT

Ceramic tube radiants 3-pack for DCS grills. Tubes measure 9-1/2" long. Price is per package of three. Radiant tube holder tray not included, shown for display purposes only. Also available in 9-pack, see part CR9PK. Made in USA.

In Stock

Retail: $33.60

$12.95

Add

Parts for DCS Grills: 19" X 9-1/2" DCS Stainless Steel Heat Shield (Replaces OEM Part 213949)

19" X 9-1/2" DCS Stainless Steel Heat Shield (Replaces OEM Part 213949)

Item# DCSHP1

19" X 9-1/2" DCS stainless steel heat shield. Fits models 24, 27DBQR, 36, 36 Series, 36ABQ, 36ABQR, 36ABQAR, 36BQ, 36BQAR, 36BQR, 48, 48 Series, 48BQ, and 48BQR. (Matches to the CIDCS-LG, 20-1/2" cast iron burner). Quality Aftermarket...

In Stock

Retail: $82.30

$63.49

Add

Parts for DCS Grills: 16-1/2" X 10-5/8" DCS Stainless Steel Heat Shield (Replaces DCS OEM Part 213948)

16-1/2" X 10-5/8" DCS Stainless Steel Heat Shield (Replaces DCS OEM Part 213948)

Item# DCSHP2

16-1/2" X 10-5/8" DCS Stainless Steel Heat Shield. Quality Aftermarket Part. Replaces DCS OEM Part 213948. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. Burner is for display purposes only;...

In Stock

Retail: $82.30

$63.49

Add

Parts for DCS Grills: 18-5/8" X 9-7/8" DCS Radiant Tube Holder. (Replaces OEM Part 214081P)

18-5/8" X 9-7/8" DCS Radiant Tube Holder. (Replaces OEM Part 214081P)

Item# DCSHP3

Stainless steel radiant tube holder for DCS. Measures 18-5/8" front to back X 9-7/8" wide. This tray holds eighteen 9-1/2" ceramic radiant tubes. (Radiant tubes not included and are shown for display only, for ceramic tubes...

In Stock

Retail: $134.80

$105.01

Add

Parts for DCS Grills: DCS Radiant Tray With Ceramic Tubes, "Complete Kit" (Replaces OEM Part 214081P With 18 Ceramic Tubes)

DCS Radiant Tray With Ceramic Tubes, "Complete Kit" (Replaces OEM Part 214081P With 18 Ceramic Tubes)

Item# DCSRADIANT-KIT

DCS "Tray and Tube" Complete Kit. Includes one stainless steel holder tray and "18" ceramic tubes. The tray measures 18-5/8" front to back X 9-7/8" wide and each ceramic tube is 9-1/2" long. Fits many DCS...

In Stock

$135.99

Add

Cooking Grates | DCS

Parts for DCS Grills: 18-1/2" X 12-3/4" Stainless Steel Rod Cooking Grate

18-1/2" X 12-3/4" Stainless Steel Rod Cooking Grate

Item# CG109SS

18-1/2" X 12-3/4" stainless steel cooking grate. Constructed of 5/16" diameter solid stainless steel rod. Sold individually.

In Stock

Retail: $101.10

$75.10

Add

Parts for DCS Grills: 18-1/2" X 25-1/2" Two Piece Stainless Steel Cooking Grate Set

18-1/2" X 25-1/2" Two Piece Stainless Steel Cooking Grate Set

Item# CG109SS-SET

Two piece stainless steel rod, cooking grate set. Each section measures 18-1/2" front to back X 12-3/4" wide, for a total set width of 25-1/2". Made of 5/16" diameter solid stainless steel rod.

In Stock

Retail: $202.20

$145.79

Add

Parts for DCS Grills: 20-1/2" X 10-7/16" Stainless Steel Rod Cooking Grate (Replaces OEM Part 212408P)

20-1/2" X 10-7/16" Stainless Steel Rod Cooking Grate (Replaces OEM Part 212408P)

Item# CG79SS4

Stainless steel cooking grate. Measures 20-1/2" front to back X 10-7/16" wide. Made of 5/16" diameter, solid stainless steel rod. Fits DCS 36 and 48 Series as well as many other brands/models. More than one required. Also available in a 3 piece...

In Stock

Retail: $124.90

$89.99

Add

Parts for DCS Grills: 20-1/2" X 31-5/16" Three Piece Stainless Steel Cooking Grate Set (Replaces 3 of OEM Part 212408P)

20-1/2" X 31-5/16" Three Piece Stainless Steel Cooking Grate Set (Replaces 3 of OEM Part 212408P)

Item# CG79SS4-SET

Three section stainless steel cooking grate set. Made of 5/16" stainless solid rod. Each section measures 20-1/2" front to back X 10-7/16" wide, for a total set width of 31-5/16". Fits DCS 36 and 48 Series as well as many other brands and...

In Stock

Retail: $374.70

$263.99

Add

Parts for DCS Grills: 19-1/2" X 12-3/4" Single Piece Stainless Steel Cooking Grate (Replaces DCS OEM Part 212427P)

19-1/2" X 12-3/4" Single Piece Stainless Steel Cooking Grate (Replaces DCS OEM Part 212427P)

Item# CG80SS

Single piece, stainless steel cooking grate. Measures 19-1/2" front to back X 12-3/4" wide. Made of 5/16" diameter, solid stainless steel rod. Fits a variety of DCS 27 Series and many other brands/models. Replaces DCS OEM Part...

In Stock

$96.98

Add

Parts for DCS Grills: 19-1/2" X 25-1/2" Two Piece Stainless Steel Cooking Grate Set for DCS 27 Series (Replaces Two Of OEM Part 212427P)

19-1/2" X 25-1/2" Two Piece Stainless Steel Cooking Grate Set for DCS 27 Series (Replaces Two Of OEM Part 212427P)

Item# CG80SS-2

Two section cooking grate set, made of 5/16" stainless steel solid rod. Each section measures 19-1/2" front to back X 12-3/4" wide, for a total set width of 25-1/2". Quality Aftermarket Part. Replaces two of OEM Part 212427P.

In Stock

Retail: $260.60

$193.99

Add

Parts for DCS Grills: 24-1/8" X 6-5/16" Warming Rack, DCS (Replaces DCS OEM Part 212921)

24-1/8" X 6-5/16" Warming Rack, DCS (Replaces DCS OEM Part 212921)

Item# D2NNM

Stainless steel warming rack. Measures 24-1/8" X 6-5/16". Constructed of 304 grade solid stainless steel rod. Fits DCS model: BGA-26BQN. Quality Aftermarket Part. Replaces DCS OEM Part 212921.

In Stock

Retail: $89.99

$69.99

Add

Parts for DCS Grills: 31" X 7-3/4" Warming Rack (Replaces DCS OEM Part 214030 and GE Monogram Part 32248-04)

31" X 7-3/4" Warming Rack (Replaces DCS OEM Part 214030 and GE Monogram Part 32248-04)

Item# D2S2J

Stainless steel warming rack. Measures 31" X 7-3/4". Constructed of 304 grade solid stainless steel rod. Fits DCS models: BGA36-BQAR, BGA36-BQARL, BGA36-BQARN, BGB36-BQAR, BGB36-BQARN, BGB48-BQRN, DCS36-BQARN, DCS36D-BQARN, DCS36E-BQARN,...

In Stock

Retail: $149.99

$88.99

Add

Gas Control Valves | DCS

Parts for DCS Grills: DCS Gas Control Valve (Replaces Part 250072)

DCS Gas Control Valve (Replaces Part 250072)

Item# DCSVLV072

DCS brass gas control valve (for main burners). The valve has a 1-3/16" long control knob stem. This valve fits many BG, BGA and BGB models. . IMPORTANT: Does not come with an orifice. It is recommended to re-use the old orifice.

In Stock

Retail: $55.00

$22.99

Add

Grill Exterior | DCS

Parts for DCS Grills: Gas/Heat Control Knob - Includes Universal Fit Kit

Gas/Heat Control Knob - Includes Universal Fit Kit

Item# 02342

Attractive black and chrome heat/gas Control Knob measures 2-5/16in. (dia. at base). Replaces an existing damaged, worn or broken heat control knob on bbq gas grills. Fit Kit included to secure knob to 6mm or 8mm

In Stock

Retail: $14.95

$11.31

Add

Parts for DCS Grills: "Knob" For Rotary Igniter/Spark Generator With "Round" Knob Shaft

"Knob" For Rotary Igniter/Spark Generator With "Round" Knob Shaft

Item# GGK9

Replacement "knob" for manual "rotary" igniter/spark generators with "round" knob shaft. Measures 1-3/4" in diameter and features "molded in" directional arrow graphics. IMPORTANT: This is the...

In Stock

$2.98

Add

Ignitor Components | DCS

Parts for DCS Grills: 20" Igniter Adapter Wire, Female Spade/Male Round

20" Igniter Adapter Wire, Female Spade/Male Round

Item# 03750

20" long igniter adapter wire. Features a "female flat spade" connector fitting on one end and a "male round"connector fitting on the other end.

In Stock

$2.95

Add

Parts for DCS Grills: Adapter Wire With Male Round And Female Spade Connectors

Adapter Wire With Male Round And Female Spade Connectors

Item# 03751

Igniter adapter wire, converts round female end fitting to "flat" female spade end fitting. Measures 2-3/4" long with male round connector on one end and a flat female spade connector on the other.

In Stock

$2.44

Add

Parts for DCS Grills: DCS "Left Side" Collector Box and Electrode (Replaces OEM Part 214269)

DCS "Left Side" Collector Box and Electrode (Replaces OEM Part 214269)

Item# DCSIG39

DCS "Left" collector box and electrode with 15" molded in wire. Fits older DCS models that requre a "left" and "right" collector box. Features "left side specific" collector box, 90...

In Stock

Retail: $51.20

$31.20

Add

Parts for DCS Grills: DCS "Right Side" Collector Box and Electrode (Replaces OEM Part 214268)

DCS "Right Side" Collector Box and Electrode (Replaces OEM Part 214268)

Item# DCSIG40

DCS "Right" collector box and electrode with 15" molded in wire. Fits older DCS models that require a "left" and "right" collector box. Features "right side specific" collector box, 90...

In Stock

Retail: $51.20

$31.20

Add

Parts for DCS Grills: "Knob" For Rotary Igniter/Spark Generator With "Round" Knob Shaft

"Knob" For Rotary Igniter/Spark Generator With "Round" Knob Shaft

Item# GGK9

Replacement "knob" for manual "rotary" igniter/spark generators with "round" knob shaft. Measures 1-3/4" in diameter and features "molded in" directional arrow graphics. IMPORTANT: This is the...

In Stock

$2.98

Add

Parts for DCS Grills: Electrode And Wire Assembly

Electrode And Wire Assembly

Item# IG-19

Electrode with wire includes wire insulating jacket. The ceramic portion hidden by the insulating wire is 3-3/4" long. Electrode tip is 1-7/8" to the tip where is bends 90 degrees. Wire length is 23-1/2" and terminates to a flat spade connector.

In Stock

Retail: $10.30

$10.15

Add

Parts for DCS Grills: Enclosed Electrode & Spark Box Assembly - 29-1/2in. Wire (Replaces DCS OEM Part 211718)

Enclosed Electrode & Spark Box Assembly - 29-1/2in. Wire (Replaces DCS OEM Part 211718)

Item# IG-33

Highest quality MHP replacement Electrode and Spark box assembly for DCS grills. DCS electrode and enclosed collector/spark box for use with Electronic Ignition Modules (by utilizing the included adapter wire). The kit includes...

In Stock

Retail: $21.90

$18.33

Add

Parts for DCS Grills: 20" Igniter Wire, With 2 Female Flat Spade Connector Ends

20" Igniter Wire, With 2 Female Flat Spade Connector Ends

Item# IG18B

20" igniter wire. Features flat female spade connectors on both ends.

In Stock

Retail: $3.10

$2.81

Add

Parts for DCS Grills: DCS Enclosed Electrode And Spark Box Assembly, With 41-1/2" Long Wire (use with Electronic Ignition Modules)

DCS Enclosed Electrode And Spark Box Assembly, With 41-1/2" Long Wire (use with Electronic Ignition Modules)

Item# IG33L

DCS main burner ignition electrode with 41-1/2' long wire and enclosed collector/spark box assembly,for use with "electronic ignition modules".. Extra long wired length enables "reach" for the electrode...

In Stock

Retail: $24.10

$19.32

Add

Parts for DCS Grills: DCS Bracketed Electrode Assembly

DCS Bracketed Electrode Assembly

Item# IG37B

DCS bracketed electrode assembly. The electrode has a molded in 15 inch wire with round connector and is mounted under the bracket with the electrode tip bent 90 degrees into the spark box. Bracket measures 3" long X 1" wide.

In Stock

$9.33

Add

Parts for DCS Grills: Igniter Wire - 20in. (Female Spade to Female Round Termination)

Igniter Wire - 20in. (Female Spade to Female Round Termination)

Item# IG7B

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end. What’s Included: (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to...

In Stock

Retail: $2.90

$2.81

Add

Parts for DCS Grills: Six Output DCS Spark Generator and Push Button (Replaces DCS OEM Part 212334P)

Six Output DCS Spark Generator and Push Button (Replaces DCS OEM Part 212334P)

Item# IGEIB12B

DCS Eltec 18351 electronic spark generator and push button. Generator has 9V battery terminals mounted on side. Six output terminals plus two larger input terminals for the push button. Replaces DCS OEM Part 212334P.

In Stock

$53.48

Add

Parts for DCS Grills: DCS 4-Outlet 9 Volt Spark Generator With Push Button (Replaces OEM Part 212333P)

DCS 4-Outlet 9 Volt Spark Generator With Push Button (Replaces OEM Part 212333P)

Item# IGEIB14B

DCS Eltec 4-output electronic spark generator and push button. Generator has an enclosure for a 9V battery on the back side. Features four output terminals plus two input terminals for the push button switch. Replaces DCS OEM Part 212333P.

In Stock

$44.08

Add

Parts for DCS Grills: Push Button for DCS Ignition Modules

Push Button for DCS Ignition Modules

Item# IGEIB18PB

Remotely located "push button switch" for DCS electronic ignition modules, IGEIB12B and IGEIB14B (sold separately). Features two flat male spade terminals for wire connection to the ignition module. If replacement wires are needed for the push...

In Stock

$18.51

Add

Parts for DCS Grills: Single Pole Manual "Rotary" Spark Generator And Knob

Single Pole Manual "Rotary" Spark Generator And Knob

Item# UP5B

Single pole(one output terminal), rotary spark generator with knob. Distance, center to center, between the mounting screw holes measures 1-3/8". Mounting hardware, 2 screws, included.

In Stock

Retail: $13.10

$11.86

Add

Parts for DCS Grills: 48" Wire with Female Spade Connectors

48" Wire with Female Spade Connectors

Item# 47B89

48" long replacement wire with female flat spade connectors on each end. One end connector features a plastic protector. Fits a wide variety of brands and models.

In Stock

Retail: $5.99

$4.75

Add

Parts for DCS Grills: "AA" Electronic Spark Generator With Two Outputs

"AA" Electronic Spark Generator With Two Outputs

Item# B072218

"AA" electronic igniter spark generator. Includes push button cap, internal battery connection spring and mounting locknut. Features two output terminals on back of the module. Genuine Broilmaster Part.

In Stock

Retail: $25.00

$22.50

Add

Parts for DCS Grills: 19in. Wire with 2 Female Flat Spade Terminals (1/8in. to 1/4in.) Replaces OEM Part G4006377

19in. Wire with 2 Female Flat Spade Terminals (1/8in. to 1/4in.) Replaces OEM Part G4006377

Item# VBSJC

19in. long ignition wire with one end being a larger 1/4in. female spade terminal connector, and at the other end a smaller 1/8in. female flat spade terminal connector. Features clear plastic terminal protectors. Used for spark generator to electrode...

In Stock

Retail: $9.99

$6.49

Add

Parts for DCS Grills: 2-3/4" Long Adapter Extension Wire - Flat male spade to round female connection

2-3/4" Long Adapter Extension Wire - Flat male spade to round female connection

Item# IG46B

Genuine MHP brand IG46B, 2-3/4 inch long adapter wire. Enables conversion of wire terminal end, from female spade to female round, allowing connection to rotary or manual push button "piezo" style spark generators. Used on some DCS grills along with...

In Stock

$3.49

Add

Random Parts | DCS

Parts for DCS Grills: DCS Slide In Wood Chip Tray

DCS Slide In Wood Chip Tray

Item# 214331

Stainless steel wood chip tray. Measures 21" long X 2-1/2" wide. The length measurement does not include the curled lip that acts as a handle. The dimensions of the handle flange face are 1-11/16" x 3-1/2". NOTE: In some older DCS grills...

In Stock

Retail: $82.43

$43.99

Add

Regulators and Hoses | DCS

Parts for DCS Grills: Propane Adapter Hose - Stainless Steel Overbraid - (14ft.)

Propane Adapter Hose - Stainless Steel Overbraid - (14ft.)

Item# 100700-168

14ft. length propane adapter hose with stainless steel overbraid. Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length...

In Stock

$69.49

Add

Parts for DCS Grills: Quick Connect Fitting - On/Off Ball Valve - 3/8in. Fitting

Quick Connect Fitting - On/Off Ball Valve - 3/8in. Fitting

Item# 104007

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug...

In Stock

$34.99

Add

Parts for DCS Grills: Quick Connect Fitting - 3/8in. (For 3/8in. Hose)

Quick Connect Fitting - 3/8in. (For 3/8in. Hose)

Item# 104406

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a...

In Stock

$29.95

Add

Parts for DCS Grills: Commercial 2-Stage Regulator - 30in. HD Hose - 3/8in. Fittings

Commercial 2-Stage Regulator - 30in. HD Hose - 3/8in. Fittings

Item# 106238-30

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of...

In Stock

$52.99

Add

Parts for DCS Grills: Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.)

Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.)

Item# 3090

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP). Has...

In Stock

Retail: $120.00

$108.00

Add

Parts for DCS Grills: Control Knob - For Automatic Gas Timer - (1 to 3hrs.)

Control Knob - For Automatic Gas Timer - (1 to 3hrs.)

Item# 3090-01

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic...

In Stock

Retail: $23.00

$20.70

Add

Parts for DCS Grills: Automatic Gas Timer - Shut Off Valve - (20/40/60min.)

Automatic Gas Timer - Shut Off Valve - (20/40/60min.)

Item# 3092

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane...

In Stock

Retail: $120.00

$108.00

Add

Parts for DCS Grills: Control Knob - For Automatic Gas Timer - (20/40/60min.)

Control Knob - For Automatic Gas Timer - (20/40/60min.)

Item# 3092-01

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality...

In Stock

Retail: $31.00

$27.90

Add

Parts for DCS Grills: Automatic Gas Timer with Stainless Steel Connection Box - (20/40/60min.)

Automatic Gas Timer with Stainless Steel Connection Box - (20/40/60min.)

Item# 5521-11T

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly. Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and...

In Stock

Retail: $267.00

$240.30

Add

Parts for DCS Grills: Automatic Gas Timer with Stainless Steel Connection Box - (1 to 3hrs.)

Automatic Gas Timer with Stainless Steel Connection Box - (1 to 3hrs.)

Item# 5521-13T

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly. Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be...

In Stock

Retail: $267.00

$240.30

Add

Parts for DCS Grills: Propane Regulator and Single Hose Assy. (40in.)

Propane Regulator and Single Hose Assy. (40in.)

Item# 99281

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. Is your gas...

In Stock

Retail: $49.49

$42.29

Add

Parts for DCS Grills: Propane Regulator and Dual (2) Hose Assy. (2 x 22in.)

Propane Regulator and Dual (2) Hose Assy. (2 x 22in.)

Item# HR5B

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas...

In Stock

Retail: $60.00

$42.49

Add

Parts for DCS Grills: Propane Regulator and Single Hose Assy. (40in.)

Propane Regulator and Single Hose Assy. (40in.)

Item# HR7B

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower...

In Stock

Retail: $33.60

$29.99

Add

Parts for DCS Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (10ft.)

3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (10ft.)

Item# NG10

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering. Quick connect...

In Stock

Retail: $82.99

$54.04

Add

Parts for DCS Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (12ft.)

3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (12ft.)

Item# NG12

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering. Quick...

In Stock

Retail: $86.99

$60.94

Add

Parts for DCS Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (14ft.)

3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (14ft.)

Item# NG14

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering. Quick...

In Stock

Retail: $93.99

$65.84

Add

Parts for DCS Grills: Convertible Gas Pressure Regulator (Natural Gas | Propane)

Convertible Gas Pressure Regulator (Natural Gas | Propane)

Item# PR-SU

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily...

In Stock

$20.59

Add

Parts for DCS Grills: Propane Regulator and Single Hose Assy. (24in.)

Propane Regulator and Single Hose Assy. (24in.)

Item# 65941

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber...

In Stock

Retail: $47.39

$40.19

Add

Parts for DCS Grills: Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.)

Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.)

Item# RGB

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in. propane gas hose. Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose...

In Stock

$7.93

Add