Sams Club Grill Parts

Burner Components Burner Shields Cooking Grates Grease Trays Grill Exterior Ignitor Components Regulators and Hoses

grill parts: Propane Regulator and Single Hose Assy. (40in.)

Sams Club grill parts: Propane Regulator and Single Hose Assy. (40in.) (image #1)

Sams Club grill parts: Propane Regulator and Single Hose Assy. (40in.) (image #2)

Sams Club grill parts: Propane Regulator and Single Hose Assy. (40in.) (image #3)

Propane Regulator and Single Hose Assy. (40in.)

Item# HR7B

IN STOCK

Retail: $43.20

$28.86

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

(1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
Instruction sheet.
Quality aftermarket part.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

Qty:

Burner Components | Sams Club

Parts for Sams Club Grills: 16-7/8" Long X 1" Diameter Stainless Steel Tube Burner

16-7/8" Long X 1" Diameter Stainless Steel Tube Burner

Item# 80016864

Stainless steel tube burner. Measures 16-7/8" long x 1" in diameter. Fits a variety of Charbroil Conventional and Tru-Infrared models, which utilize a "screw mount" carry over tube. The venturi or...

In Stock

$11.99

Add

Parts for Sams Club Grills: Members Mark Cast Iron Burner

Members Mark Cast Iron Burner

Item# CISC

Rectanglular cast iron burner. Fits Members Mark grills. Dimensions 4-3/4" wide X 15-3/4" total length.

In Stock

$29.37

Add

Parts for Sams Club Grills: 15-7/8" X 4-3/4" Cast Stainless Rectangular Burner

15-7/8" X 4-3/4" Cast Stainless Rectangular Burner

Item# CISC-SS

Cast stainless steel rectangular burner. Overall dimensions (including the mounting bracket and venturi pipe) are 15-7/8" long X 4-3/4" wide. The burner rectangle itself measures 12" long X 4-3/4" wide. Features a mounting peg with cotter pin on the...

In Stock

$84.99

Add

Parts for Sams Club Grills: 15-7/8" X 2-7/8" Wide Angled Top Cast Iron Burner

15-7/8" X 2-7/8" Wide Angled Top Cast Iron Burner

Item# CIT

Cast iron bar burner. Burner measures 15-7/8" long X 2-7/8" wide across the angled top portion. Venturi pipe extends 1-7/8" past the body of the burner. Features air/gas mixture adjustment locking screw at venturi end. ...

In Stock

$26.57

Add

Parts for Sams Club Grills: Cast Stainless Steel Burner - (15-7/8in. x 2-5/8in.)

Cast Stainless Steel Burner - (15-7/8in. x 2-5/8in.)

Item# CIT-SS

High Quality Cast Stainless Steel Burner for longevity and heat distribution and retention. Features a stainless steel air mixture adjustment shutter with insect screen, and rear mounting peg with Cotter Pin clip. Fits a variety of Grill Brands that have...

In Stock

Retail: $113.40

$68.59

Add

Parts for Sams Club Grills: 14-3/8" X 1" Diameter Stainless Steel Tube Burner

14-3/8" X 1" Diameter Stainless Steel Tube Burner

Item# G431-0300-W2A

Stainless steel tube burner. Measures 14-3/8" long x 1" in diameter. Fits a variety of Charbroil, Kenmore and many other brands/models, which utilize a "screw mount" carry over tube. The venturi or valve end of the tube has an insect...

In Stock

$15.39

Add

Parts for Sams Club Grills: 16" Center Feed "U" Shaped Main Burner, Grand Hall

16" Center Feed "U" Shaped Main Burner, Grand Hall

Item# GHU1

Stainless steel center feed "U" shaped main burner for Grand Hall and some Members Mark models. Measures 5-1/8" wide X 16" long. Features an air adjustment shutter and mounting tab. (Replaces OEM# P02008004A)

In Stock

$61.82

Add

Parts for Sams Club Grills: 16" Stainless Steel Looped Tube Burner

16" Stainless Steel Looped Tube Burner

Item# JATB1

Round looped tube burner. Stainless steel. Measures 16" tip to tip X 4-1/2" wide. Mounting end has a flat flange with holes drilled on each side.

In Stock

$31.55

Add

Parts for Sams Club Grills: 31-3/4" X 4-5/8" Burner Support Rail For Stainless Steel Tube Burners, Members Mark/Sams Club

31-3/4" X 4-5/8" Burner Support Rail For Stainless Steel Tube Burners, Members Mark/Sams Club

Item# MMBR1

Stainless steel burner support rail with carryover channels. Measures 31-3/4" X 4-5/8". Fits a variety of Members Mark/Sams Club "3" burner models. IMPORTANT: This support rail is designed to fit with stainless steel tubular burners only,...

In Stock

$40.93

Add

Parts for Sams Club Grills: 34-1/4" Burner Support Rail For Cast Iron Burners, Members Mark

34-1/4" Burner Support Rail For Cast Iron Burners, Members Mark

Item# MMBR2

Stainless steel burner support rail for Members Mark (Sams Club) 3 burner models, that use cast iron burner part CISC (sold separately) and have a smoker burner. Features 3 burner mount holes, 2 flame crossover channels and a notch in the rail to...

In Stock

$59.29

Add

Parts for Sams Club Grills: Members Mark Cast Iron 3 Burner Set

Members Mark Cast Iron 3 Burner Set

Item# P1925A-3

Rectanglular cast iron burner set savings. Includes three cast iron burners. Fits Members Mark (Sams Club) grills. Dimensions 4-3/4" wide X 15-3/4" total length.

In Stock

Retail: $145.35

$81.95

Add

Parts for Sams Club Grills: 15-1/2" Stainless Steel Tube Burner

15-1/2" Stainless Steel Tube Burner

Item# SCTB1

Straight stainless steel tube burner. Burner features include an adjustable air shutter and a mounting flange welded to the side of the burner for the ignitor electrode. Measures 15-1/2" long. Mounting hole is centered on back end.

In Stock

$22.58

Add

Parts for Sams Club Grills: 15-1/2" X 4-3/4" Stainless Steel Looped Tube Burner

15-1/2" X 4-3/4" Stainless Steel Looped Tube Burner

Item# SCTB2

15-1/2" X 4-3/4" stainless steel looped pipe burner. Fits a variety of Sams Club/Members Mark models. Burner measures 15-1/2" long (including the mounting tab extension at the back end) X 4-3/4" wide. Features an air mixture adjustment shutter at the valve...

In Stock

Retail: $62.05

$31.75

Add

Parts for Sams Club Grills: 14-7/8" Stainless Steel Tube Burner

14-7/8" Stainless Steel Tube Burner

Item# SCTB3

Straight stainless steel tube burner. Burner has an adjustable air shutter. Measures 14-7/8" long. Mounting hole is centered on back end.

In Stock

$22.58

Add

Parts for Sams Club Grills: 17" Stainless Steel Tube Burner, With Flame Hole "Lip Guard" Design

17" Stainless Steel Tube Burner, With Flame Hole "Lip Guard" Design

Item# SCTB4

17" stainless steel tube burner. Fits a variety of Sams Club models. Features unique flame hole "lip guard" on each side of the tube (helps to prevent food drippings from clogging the flame holes), an air adjustment shutter with set screw on the valve end...

In Stock

$22.46

Add

Parts for Sams Club Grills: 14-3/4" Stainless Steel Tube Burner, With Flame Hole "Lip Guard" Design

14-3/4" Stainless Steel Tube Burner, With Flame Hole "Lip Guard" Design

Item# SCTB5

14-3/4" stainless steel tube burner. Fits a variety of Sams Club models. Features unique flame hole "lip guard" on each side of the tube (helps to prevent food drippings from clogging the flame holes), an air adjustment shutter with set screw on the valve...

In Stock

$22.46

Add

Burner Shields | Sams Club

Parts for Sams Club Grills: Ceramic Briquettes - Pyramid Hollowed Core - (2in. x 2in.) - 48 Count

Ceramic Briquettes - Pyramid Hollowed Core - (2in. x 2in.) - 48 Count

Item# 41648

48 count, high quality kiln dried Pyramid Ceramic Briquettes, each measuring 2in. x 2in. for a total of 192 sq. in. coverage. These high-performance briquettes feature a pyramid shape and hollowed core to increase radiant heat distribution. For use with...

In Stock

$55.99

Add

Parts for Sams Club Grills: 7" X 8" Ceramic Radiant Flame Tamers, 6 Pack

7" X 8" Ceramic Radiant Flame Tamers, 6 Pack

Item# 97501

Box of 6 ceramic radiant flame tamers. Each piece measures 7" X 8". Fits many Members Mark, Sams Club, Bakers and Chefs and other brand models. Custom fit into flame tamer rack, Part BG-45, sold separately.

In Stock

$57.49

Add

Parts for Sams Club Grills: 16-5/8" X 31" Ceramic Tile Holder For Members Mark/Sams Club/Grand Hall

16-5/8" X 31" Ceramic Tile Holder For Members Mark/Sams Club/Grand Hall

Item# BG-45

Heavy duty, nickel/chrome plated "Flame Tamer" (Ceramic Tile) rack. Measures 16-5/8" X 31". Designed to support 7" X 8" ceramic tiles, see part #97501 (sold separately). Fits many Sams Club/Members Mark models. (Ceramic...

In Stock

Retail: $109.65

$67.95

Add

Parts for Sams Club Grills: 9" x 17-3/8" Ceramic Tile Holder For Members Mark/Sams Club/Grand Hall

9" x 17-3/8" Ceramic Tile Holder For Members Mark/Sams Club/Grand Hall

Item# BG46

Heavy duty, nickel/chrome plated "Flame Tamer" (Ceramic Tile) rack. Measures 9" X 17-3/8". Designed to support ceramic tiles, part #GTFT. Fits many Sams Club/Members Mark and Grand Hall models. Ceramic tiles not included. (Replaces OEM...

In Stock

$35.63

Add

Parts for Sams Club Grills: 17-1/4" X 33-7/16" Ceramic Tile Holder For Members Mark/Sams Club/Grand Hall Replaces OEM Part# P01722021B)

17-1/4" X 33-7/16" Ceramic Tile Holder For Members Mark/Sams Club/Grand Hall Replaces OEM Part# P01722021B)

Item# BG47

Heavy duty, nickel/chrome plated "Flame Tamer" (Ceramic Tile) rack. Measures 17-1/4" X 33-7/16". Designed to support 4-3/4" X 7-1/16" ceramic tiles, see part #GTFT (sold separartely). Fits many Sams...

In Stock

$82.55

Add

Parts for Sams Club Grills: 16-13/16" X 3-5/16" Burner Heat Distribution Shield

16-13/16" X 3-5/16" Burner Heat Distribution Shield

Item# BMHP7

Stainless steel tent shaped burner shield. Measures 16-13/16" long X 3-5/16" wide (measured across the bottom). Features single mounting hole at the peak of the tent, on each end. Fits many Brinkmann models. IMPORTANT: Remove protective plastic...

In Stock

$15.83

Add

Parts for Sams Club Grills: 4-3/4" X 7-1/16" Ceramic Radiant Flame Tamers, 4 Pack

4-3/4" X 7-1/16" Ceramic Radiant Flame Tamers, 4 Pack

Item# GTFT

Box of 4 ceramic radiant flame tamers. Each piece measures 4-3/4" X 7-1/16". Fits many Members Mark/Sams Club, Grand Hall, Bakers and Chefs and other brands/models. Custom fit into flame tamer racks, Parts BG46 and BG47, sold separately.

In Stock

$27.76

Add

Parts for Sams Club Grills: 17-3/4" X 6-3/8" Burner Heat Distribution Shield

17-3/4" X 6-3/8" Burner Heat Distribution Shield

Item# NGCHP2

Heavy guage 430 stainless steel heat distribution plate. Measures 17-3/4" long x 6-3/8" across the bottom. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. IMPORTANT: Remove protective plastic film (if...

In Stock

$24.40

Add

Parts for Sams Club Grills: 17-1/4" X 5" Burner Heat Distribution Shield

17-1/4" X 5" Burner Heat Distribution Shield

Item# NGCHP3

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 5" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective...

In Stock

$23.73

Add

Parts for Sams Club Grills: 17-1/4" X 5-7/8" Burner Heat Distribution Shield

17-1/4" X 5-7/8" Burner Heat Distribution Shield

Item# NGCHP4

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 5-7/8" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective...

In Stock

$23.75

Add

Parts for Sams Club Grills: 15-3/8" X 4-7/8" Burner Heat Distribution Shield

15-3/8" X 4-7/8" Burner Heat Distribution Shield

Item# NGSAMHP1

Sams Club and Nexgrill stainless steel heat distribution shield. Features V-notches and round vent holes at each end of the shield. The shield measures 15-3/8" X 4-7/8". (For ease of measurement we measure the width from the bottom...

In Stock

$18.97

Add

Parts for Sams Club Grills: 17-5/16" X 9-7/8" Burner Heat Distribution Shield

17-5/16" X 9-7/8" Burner Heat Distribution Shield

Item# NGSHP2

Stainless steel heat distribution shield. Measures 17-5/16" front to back X 9-7/8" wide. Fits a variety of Nexgrill and Costco/Kirkland models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

Retail: $50.25

$29.49

Add

Parts for Sams Club Grills: 13-1/2" X 4" Burner Heat Distribution Shield

13-1/2" X 4" Burner Heat Distribution Shield

Item# SCHP1

Stainless steel burner shield. The hanging flanges at the ends of the shield are bent up and out at a 90 degree angle. The main flat part of the shield measures 13-1/2" X 4". Total length measurement including the extended flange ends is...

In Stock

$19.73

Add

Parts for Sams Club Grills: 16-1/8" X 8-1/4" Burner Heat Distribution Shield

16-1/8" X 8-1/4" Burner Heat Distribution Shield

Item# SCHP2

Members Mark burner heat distribution shield. Laser cut stainless steel. Dimensions are 8-1/4" wide X 16-1/8" long. More than one required. Sold individually. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$22.75

Add

Parts for Sams Club Grills: 16-1/8" X 4-5/8" Burner Heat Distribution Shield

16-1/8" X 4-5/8" Burner Heat Distribution Shield

Item# SCHP3

Stainless steel burner shield. The shield measures 16-1/8" X 4-5/8". For ease of measurement we measure the width from the bottom side. Features slotted vent holes on each side of the plate. IMPORTANT: Remove protective plastic film (if...

In Stock

$24.38

Add

Parts for Sams Club Grills: 15-3/8" X 4" Burner Heat Distribution Shield

15-3/8" X 4" Burner Heat Distribution Shield

Item# SCHP4

Stainless steel burner shield. The hanging flanges at the ends of the shield are bent down and out at a 90 degree angle. The main flat part of the shield measures 15-3/8" X 4". Total length measurement including the extended flange ends is...

In Stock

Retail: $38.05

$21.02

Add

Parts for Sams Club Grills: 11-7/8" X 8-7/16" Burner Heat Distribution Shield

11-7/8" X 8-7/16" Burner Heat Distribution Shield

Item# SCHP6

Members Mark, stainless steel burner heat distribution shield. Dimensions are 8-7/16" wide X 11-7/8" long. Features mounting tab legs on each corner. More than one required. Sold individually. IMPORTANT: Remove protective plastic film (if...

In Stock

Retail: $29.50

$16.99

Add

Cooking Grates | Sams Club

Parts for Sams Club Grills: 18-7/8" X 24-3/4" Two Piece "Matte Finish" Cast Iron Cooking Grate Set

18-7/8" X 24-3/4" Two Piece "Matte Finish" Cast Iron Cooking Grate Set

Item# 66662

Two piece, porcelain coated "matte finish" (non-gloss) cast iron cooking grate set. Each piece measures 12-3/8" wide x 18-7/8" front to back, for a total set width of 24-3/4".

In Stock

$67.49

Add

Parts for Sams Club Grills: 18-3/4" X 31-1/2" Three Piece Cast Iron Cooking Grate Set

18-3/4" X 31-1/2" Three Piece Cast Iron Cooking Grate Set

Item# 68073

Heavy duty 3 piece "matte finish" cast iron cooking grate set. Each section measures 18-3/4" front to back X 10-1/2" wide. For a total set width of 31-1/2".

In Stock

$86.94

Add

Parts for Sams Club Grills: 17-1/4" X 29-3/4" Three Piece Stainless Steel Rod Cooking Grate Set

17-1/4" X 29-3/4" Three Piece Stainless Steel Rod Cooking Grate Set

Item# CG110SSET

17-5/16" X 29-3/4" solid 1/4" (304 Grade) stainless steel rod, three piece cooking grate set. All 3 pieces measure 17-1/4" front to back. Two pieces measure 9-3/4" wide and one piece (center piece) measures 10-1/4" wide, for a...

In Stock

$137.54

Add

Parts for Sams Club Grills: Cooking Grate - Cast Iron - (19-1/8in. x 12-3/8in.)

Cooking Grate - Cast Iron - (19-1/8in. x 12-3/8in.)

Item# CG58PCI

Heavy duty, cast iron cooking grate holds heat, and cleans up easily thanks to its porcelain enamel matte finish and non-stick properties. One grate at 19-1/8in. x 12-3/8in. width. Measure you’re grills grate area to calculate the quantity of grates...

In Stock

$49.32

Add

Parts for Sams Club Grills: 19-1/8" X 7-5/8" Cast Iron Cooking Grate

19-1/8" X 7-5/8" Cast Iron Cooking Grate

Item# CG60PCI

Heavy duty, porcelain enameled "matte finish" cast iron cooking grate. Measures 7-5/8" wide X 19-1/8" front to back. More than one required. Sold individually. Fits a variety of BBQ Galore/Turbo, Perfect Flame, Sams/Members Mark grills and...

In Stock

$35.49

Add

Parts for Sams Club Grills: 17-5/8" X 10-3/8" Cast Iron Cooking Grate

17-5/8" X 10-3/8" Cast Iron Cooking Grate

Item# CG67P-CI

Heavy duty, matte finish cast iron cooking grate. Measures 10-3/8" wide X 17-5/8" front to back. Normally used in sets of multiples of itself or along with part CG73P-CI. Sold individually.

In Stock

Retail: $45.50

$34.47

Add

Parts for Sams Club Grills: 19-1/4" X 10-3/8" Cast Iron Cooking Grate

19-1/4" X 10-3/8" Cast Iron Cooking Grate

Item# CG69PCI

Heavy duty, porcelain enameled "matte finish" cast iron cooking grate. Measures 10-3/8" wide X 19-1/4" front to back. More than one required. Sold individually. (Also available as a set of 3, see part CG69PCI-3).

In Stock

$43.68

Add

Parts for Sams Club Grills: 19-1/4" X 31-1/8" Three Piece Cast Iron Cooking Grate Set

19-1/4" X 31-1/8" Three Piece Cast Iron Cooking Grate Set

Item# CG69PCI-3

Heavy duty, porcelain enameled "matte finish" cast iron, 3-piece cooking grate set. Fits Ducane Stainless Series 5-burner grills and a variety of other brands and models. Each section measures 19-1/4" front to back X 10-3/8" wide. Total...

In Stock

Retail: $165.60

$131.05

Add

Parts for Sams Club Grills: 19-1/4" X 10-3/8" Stainless Steel Rod Cooking Grate

19-1/4" X 10-3/8" Stainless Steel Rod Cooking Grate

Item# CG96SS

Single piece, 5/16" diameter solid stainless steel rod (304 Grade), cooking grate. Fits Ducane Stainless Series 5-burner models and a variety of other brands/models. Measures 19-1/4" front to back X 10-3/8" wide. More than one required....

In Stock

Retail: $122.50

$81.59

Add

Parts for Sams Club Grills: 19-1/4" X 31-1/8" Three Piece Stainless Steel Rod Cooking Grate Set

19-1/4" X 31-1/8" Three Piece Stainless Steel Rod Cooking Grate Set

Item# CG96SS-3

3 piece stainless steel cooking grate set. Sturdy 5/16" diameter solid stainless steel rod construction (304 grade). Fits Ducane Stainless Series 5-burner models and a variety of other brands/models. Each piece measures 19-1/4"...

In Stock

$182.99

Add

Grease Trays | Sams Club

Parts for Sams Club Grills: 10-7/8" X 5-3/4" Slide Out Grease Catch Pan Gray

10-7/8" X 5-3/4" Slide Out Grease Catch Pan Gray

Item# G516-6900-W1

Rectangular slide out grease catch pan. Gray powder coat finish. Pan measures 10-7/8" long X 5-3/4" wide, (Measurement does not include handle).

In Stock

$10.99

Add

Parts for Sams Club Grills: 15-3/4" X 31-7/8" Members Mark Stainless Grease Tray

15-3/4" X 31-7/8" Members Mark Stainless Grease Tray

Item# MMGT1

Heavy gauge stainless steel grease tray for Members Mark grills. Measures 15-3/4" X 31-7/8". Features a centered oval drain opening with affixed catch pan support rails on the underside. (Catch pan not included, see part G516-6900-W1). Fits models...

In Stock

$104.38

Add

Parts for Sams Club Grills: 18-1/2" X 30-1/2" Members Mark Stainless Grease Tray

18-1/2" X 30-1/2" Members Mark Stainless Grease Tray

Item# MMGT2

Heavy gauge stainless steel grease tray for Members Mark grills. Measures 18-1/2" X 30-1/2" (including the front handle end extensions). Fits models REGAL04ALP and REGAL04ANG.

In Stock

$104.38

Add

Grill Exterior | Sams Club

Parts for Sams Club Grills: Gas/Heat Control Knob - Includes Universal Fit Kit

Gas/Heat Control Knob - Includes Universal Fit Kit

Item# 02342

Attractive black and chrome heat/gas Control Knob measures 2-5/16in. (dia. at base). Replaces an existing damaged, worn or broken heat control knob on bbq gas grills. Fit Kit included to secure knob to 6mm or 8mm “D” shaped gas valve stems...

In Stock

Retail: $19.55

$10.45

Add

Ignitor Components | Sams Club

Parts for Sams Club Grills: 6" Jumper Wire For Electronic Ignition Module

6" Jumper Wire For Electronic Ignition Module

Item# 03197

Jumper wire for closing off unused terminals on battery powered electronic ignition modules. Measures 6" long, (including the connectors). Features flat spade connectors with plastic protectors on each end.

In Stock

$2.87

Add

Parts for Sams Club Grills: 3 Output "AA" Ignition Module With Push Button Cap

3 Output "AA" Ignition Module With Push Button Cap

Item# 03333

Three output "AA" electronic ignition module with push button battery cap. Features 3 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.

In Stock

$18.57

Add

Parts for Sams Club Grills: 4 Output "AA" Electronic Ignition Module With Push Button Cap

4 Output "AA" Electronic Ignition Module With Push Button Cap

Item# 03340

Four output "AA" electronic ignition module with push button battery cap. Features 4 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.

In Stock

$17.93

Add

Parts for Sams Club Grills: 47" Wire With Spade Connectors

47" Wire With Spade Connectors

Item# 03610

47" Replacement wire with flat female spade connectors on each end. One end black shrink wrapped and the other with a square plastic protector.

In Stock

Retail: $10.20

$5.35

Add

Parts for Sams Club Grills: 3-5/8" Igniter Electrode With Mounting Bracket, Main Burner

3-5/8" Igniter Electrode With Mounting Bracket, Main Burner

Item# 04022

3-5/8" long main burner igniter electrode with mounting bracket. Features a 90 degree bend electrode tip, 3" long white ceramic insulator with attached mounting bracket and a flat male spade wire terminal. Mounting hardware included. Fits a variety of...

In Stock

$4.39

Add

Parts for Sams Club Grills: "AA" Electronic Spark Generator With Two Outputs

"AA" Electronic Spark Generator With Two Outputs

Item# B072218

"AA" electronic igniter spark generator. Includes push button cap, internal battery connection spring and mounting locknut. Features two output terminals on back of the module. Genuine Broilmaster Part.

In Stock

Retail: $25.00

$22.50

Add

Parts for Sams Club Grills: 2 Output "AA" Electronic Ignition Module With Push Button Cap

2 Output "AA" Electronic Ignition Module With Push Button Cap

Item# G409-0021-W1

Two output "AA" electronic ignition module with push button battery cap. Features 2 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Fits Charbroil Performance,...

In Stock

$9.99

Add

Parts for Sams Club Grills: Push Button/Battery Cap For "AA" Electronic Ignition Module

Push Button/Battery Cap For "AA" Electronic Ignition Module

Item# G409-0030-W1

Push button battery cap with spring, for "AA" electronic ignition module. The cap features a soft rubber "push button" top. The diameter at the base of the cap measures 1-1/4".

In Stock

$4.99

Add

Parts for Sams Club Grills: Push Button Cap For MHP "AAA" Electronic Ignition Module

Push Button Cap For MHP "AAA" Electronic Ignition Module

Item# GGEIBPB

Push button battery cap for MHP "AAA" electronic ignition module. Features chrome finish with black rubber push button top. Base diameter is: 1-5/16" Includes module mounting lock ring nut.

In Stock

$4.94

Add

Parts for Sams Club Grills: Ignitor Gas Collector Box and Electrode Assembly

Ignitor Gas Collector Box and Electrode Assembly

Item# IG-17B

Stainless steel burner ignitor collector box and electrode assembly. Mounting stud length measures 2". Includes locking nuts as shown. Total length is 4" from the top to the bottom of the electrode. Wire connection at bottom takes a round connector.

In Stock

Retail: $11.00

$8.89

Add

Parts for Sams Club Grills: 2-3/4" Ignitor Electrode

2-3/4" Ignitor Electrode

Item# IG-20

Burner ignitor electrode with 90 degree bend electrode tip and flat male spade wire connector end. The overall length measures 2-3/4" tip to tip. The mounting bracket to the tip of the electrode measures 1-1/8". Includes...

In Stock

Retail: $6.75

$4.60

Add

Parts for Sams Club Grills: 20" Igniter Wire, With 2 Female Flat Spade Connector Ends

20" Igniter Wire, With 2 Female Flat Spade Connector Ends

Item# IG18B

20" igniter wire. Features flat female spade connectors on both ends.

In Stock

$2.81

Add

Parts for Sams Club Grills: Igniter Wire - 20in. (Female Spade to Female Round Termination)

Igniter Wire - 20in. (Female Spade to Female Round Termination)

Item# IG7B

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end. What’s Included: (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to...

In Stock

$2.81

Add

Parts for Sams Club Grills: Electronic Ignition Module with Push Button Start - 2 Output

Electronic Ignition Module with Push Button Start - 2 Output

Item# IGEIB2B

Universal gas grill 2 output electronic ignition module with push button cap that utilizes one AAA Battery (not included). Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male...

In Stock

$22.92

Add

Parts for Sams Club Grills: 3 Output "AAA" Electronic Ignition Module With Push Button Battery Cap

3 Output "AAA" Electronic Ignition Module With Push Button Battery Cap

Item# IGEIB3B

3 output "AAA" electronic spark generator. Features three male spade output wire terminals on the back side, clear epoxy encapsulated coil, module mounting lock ring and a push button battery cap. Requires a 3/4" or 13/16" mounting hole....

In Stock

$20.94

Add

Parts for Sams Club Grills: Electronic Ignition Module with Push Button Start - 4 Output

Electronic Ignition Module with Push Button Start - 4 Output

Item# IGEIB4B

Universal gas grill 4 output electronic ignition module with push button cap that utilizes one AAA Battery (not included). Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male...

In Stock

$20.99

Add

Parts for Sams Club Grills: 6 Output "AA" Electronic Ignition Module With Push Button Cap

6 Output "AA" Electronic Ignition Module With Push Button Cap

Item# IGEIB6B

Universal 6 output "AA" ignition module with soft push button battery cap. Features 6 output terminals on the back. Mounting hole needs to be at least 7/8" diameter. Battery not included.

In Stock

$20.94

Add

Parts for Sams Club Grills: 5-5/16" T-Shaped Ignitor Collector Box and Electrode

5-5/16" T-Shaped Ignitor Collector Box and Electrode

Item# IG-23

Stainless steel ignitor spark box with electrode and wire. Mounts between burners and ignites the gas as it flows through the burner tube. Measures 5-5/16" across the box and stands out approximately 3-1/2".

In Stock

Retail: $15.25

$9.20

Add

Parts for Sams Club Grills: Electronic Ignition Module with Push Button Start - 1 Output

Electronic Ignition Module with Push Button Start - 1 Output

Item# IGEIBB

Universal gas grill Single Output electronic ignition module with push button cap that utilizes one AAA Battery (not included). Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (1)...

In Stock

$20.94

Add

Regulators and Hoses | Sams Club

Parts for Sams Club Grills: Propane Adapter Hose - Stainless Steel Overbraid - (14ft.)

Propane Adapter Hose - Stainless Steel Overbraid - (14ft.)

Item# 100700-168

14ft. length propane adapter hose with stainless steel overbraid. Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length...

In Stock

$76.99

Add

Parts for Sams Club Grills: Quick Connect Fitting - On/Off Ball Valve - 3/8in. Fitting

Quick Connect Fitting - On/Off Ball Valve - 3/8in. Fitting

Item# 104007

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug...

In Stock

$32.99

Add

Parts for Sams Club Grills: Quick Connect Fitting - 3/8in. (For 3/8in. Hose)

Quick Connect Fitting - 3/8in. (For 3/8in. Hose)

Item# 104406

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a...

In Stock

$23.34

Add

Parts for Sams Club Grills: Commercial 2-Stage Regulator - 30in. HD Hose - 3/8in. Fittings

Commercial 2-Stage Regulator - 30in. HD Hose - 3/8in. Fittings

Item# 106238-30

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of...

In Stock

$49.99

Add

Parts for Sams Club Grills: Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.)

Automatic Gas Timer - Shut Off Valve - (1 to 3hrs.)

Item# 3090

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP). Has...

In Stock

Retail: $102.00

$91.80

Add

Parts for Sams Club Grills: Control Knob - For Automatic Gas Timer - (1 to 3hrs.)

Control Knob - For Automatic Gas Timer - (1 to 3hrs.)

Item# 3090-01

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic...

In Stock

Retail: $20.00

$18.00

Add

Parts for Sams Club Grills: Automatic Gas Timer - Shut Off Valve - (20/40/60min.)

Automatic Gas Timer - Shut Off Valve - (20/40/60min.)

Item# 3092

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane...

In Stock

Retail: $102.00

$91.80

Add

Parts for Sams Club Grills: Control Knob - For Automatic Gas Timer - (20/40/60min.)

Control Knob - For Automatic Gas Timer - (20/40/60min.)

Item# 3092-01

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality...

In Stock

Retail: $26.00

$23.40

Add

Parts for Sams Club Grills: Automatic Gas Timer with Stainless Steel Connection Box - (20/40/60min.)

Automatic Gas Timer with Stainless Steel Connection Box - (20/40/60min.)

Item# 5520-11T

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly. Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be...

In Stock

Retail: $254.00

$228.60

Add

Parts for Sams Club Grills: Automatic Gas Timer with Stainless Steel Connection Box - (1 to 3hrs.)

Automatic Gas Timer with Stainless Steel Connection Box - (1 to 3hrs.)

Item# 5520-13T

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly. Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry...

In Stock

Retail: $239.00

$215.10

Add

Parts for Sams Club Grills: Propane Regulator and Single Hose Assy. (24in.)

Propane Regulator and Single Hose Assy. (24in.)

Item# 65941

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber...

In Stock

Retail: $35.29

$33.00

Add

Parts for Sams Club Grills: Propane Regulator and Single Hose Assy. (40in.)

Propane Regulator and Single Hose Assy. (40in.)

Item# 99281

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. Is your gas...

In Stock

Retail: $36.99

$34.95

Add

Parts for Sams Club Grills: Propane Regulator and Single Hose Assy. (24in.)

Propane Regulator and Single Hose Assy. (24in.)

Item# HR4B

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a...

In Stock

$28.22

Add

Parts for Sams Club Grills: Propane Regulator and Dual (2) Hose Assy. (2 x 22in.)

Propane Regulator and Dual (2) Hose Assy. (2 x 22in.)

Item# HR5B

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas...

In Stock

Retail: $60.00

$42.49

Add

Parts for Sams Club Grills: Propane Regulator and Single Hose Assy. (40in.)

Propane Regulator and Single Hose Assy. (40in.)

Item# HR7B

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower...

In Stock

Retail: $43.20

$28.86

Add

Parts for Sams Club Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (10ft.)

3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (10ft.)

Item# NG10

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering. Quick connect...

In Stock

Retail: $82.99

$54.04

Add

Parts for Sams Club Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (12ft.)

3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (12ft.)

Item# NG12

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering. Quick...

In Stock

Retail: $86.99

$60.94

Add

Parts for Sams Club Grills: 3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (14ft.)

3/8in. Gas Hose with Quick Connect Kit - 3/8in. Fittings (14ft.)

Item# NG14

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering. Quick...

In Stock

Retail: $93.99

$65.84

Add

Parts for Sams Club Grills: Convertible Gas Pressure Regulator (Natural Gas | Propane)

Convertible Gas Pressure Regulator (Natural Gas | Propane)

Item# PR-SU

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily...

In Stock

$20.59

Add

Parts for Sams Club Grills: Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.)

Propane Hose Protector/Rodent Guard - Stainless Steel - (23in.)

Item# RGB

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in. propane gas hose. Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose...

In Stock

$7.93

Add