Stainless steel tube burner.  Measures 16-7/8" long x 1" in diameter.  Fits a variety of Charbroil Conventional and Tru-Infrared models, which utilize a "screw mount" carry over tube.  The venturi or valve end of the tube has an insect screen, air mixture screw and mounting holes for the electrode.  The back end of the tube features a short 90 degree bend with a centered mounting screw hole and a hole for the carry over tube mounting screw. Burner mounting hardware included (one each, screw, flat washer and lock washer).  Genuine Charbroil Part. 

Rectanglular cast iron burner. Fits Members Mark grills. Dimensions 4-3/4" wide X 15-3/4" total length.

Cast stainless steel rectangular burner. Overall dimensions (including the mounting bracket and venturi pipe) are 15-7/8" long X 4-3/4" wide. The burner rectangle itself measures 12" long X 4-3/4" wide. Features a mounting peg with cotter pin on the underside of the mounting bracket, at the back end of the burner.

Cast iron bar burner. Burner measures 15-7/8" long X 2-7/8" wide across the angled top portion.  Venturi pipe extends 1-7/8" past the body of the burner.  Features air/gas mixture adjustment locking screw at venturi end.  IMPORTANT: This burner has a 1/2" wide valve stem opening at the venturi end and the distance from the end of the venturi pipe to the center of the bottom mounting peg is 15-3/8". Mounting peg cotter pin included.

High Quality Cast Stainless Steel Burner for longevity and heat distribution and retention. Features a stainless steel air mixture adjustment shutter with insect screen, and rear mounting peg with Cotter Pin clip.

Fits a variety of Grill Brands that have 3, 4 and 5 burner models. 

These Cast Stainless Steel Burners for three to five burner grills aren't your run-of-the-mill grill components; they're the backbone of your outdoor cooking empire. Crafted with precision and durability in mind, these burners are like the Iron Man suits of the grilling world—sleek, powerful, and ready to take on whatever culinary challenge you throw their way. With their heavy-duty construction and superior heat retention, these Grillparts.com Cast Stainless Steel Burners ensure consistent cooking temperatures across the board, so you can kiss unevenly cooked meals goodbye. Whether you're searing up a steak or slow-roasting some veggies, these burner bad boys have got your back.

Measurements:

• Length: 15-7/8in.(Tip-to-tip)
• Width: 2-5/8in. (Across the angled top)
• Venturi pipe extends 2-3/8in. past the body of the burner.
• IMPORTANT:  Please verify this dimension; Measurement from the end of the venturi (valve end) pipe to the center of the rear mounting peg (located on the bottom of the burner) is 15-13/16in.

What’s Included:

• (1) Cast Stainless Steel Burner - (15-7/8in. x 2-5/8in.)
• Sold individually, more than one required
• Highest quality aftermarket part

Stainless steel tube burner. Measures 14-3/8" long x 1" in diameter. Fits a variety of Charbroil, Kenmore and many other brands/models, which utilize a "screw mount" carry over tube. The venturi or valve end of the tube has an insect screen, air mixture screw and mounting holes for the electrode. The back end of the tube features a short 90 degree bend with a centered mounting screw hole and a hole for the carry over tube mounting screw. Mounting hardware included. Genuine Charbroil Part. (Replaces Part G431-0300-W2)

Stainless steel center feed "U" shaped main burner for Grand Hall and some Members Mark models. Measures 5-1/8" wide X 16" long. Features an air adjustment shutter and mounting tab. (Replaces OEM# P02008004A)

Round looped tube burner. Stainless steel. Measures 16" tip to tip X 4-1/2" wide. Mounting end has a flat flange with holes drilled on each side.

Stainless steel burner support rail with carryover channels. Measures 31-3/4" X 4-5/8". Fits a variety of Members Mark/Sams Club "3" burner models. IMPORTANT: This support rail is designed to fit with stainless steel tubular burners only, not cast iron.

Stainless steel burner support rail for Members Mark (Sams Club) 3 burner models, that use cast iron burner part CISC (sold separately) and have a smoker burner. Features 3 burner mount holes, 2 flame crossover channels and a notch in the rail to accomodate the smoker burner.

Rectanglular cast iron burner set savings. Includes three cast iron burners. Fits Members Mark (Sams Club) grills. Dimensions 4-3/4" wide X 15-3/4" total length.

Straight stainless steel tube burner. Burner features include an adjustable air shutter and a mounting flange welded to the side of the burner for the ignitor electrode. Measures 15-1/2" long. Mounting hole is centered on back end.

15-1/2" X 4-3/4" stainless steel looped pipe burner. Fits a variety of Sams Club/Members Mark models. Burner measures 15-1/2" long (including the mounting tab extension at the back end) X 4-3/4" wide. Features an air mixture adjustment shutter at the valve end.

Straight stainless steel tube burner. Burner has an adjustable air shutter. Measures 14-7/8" long. Mounting hole is centered on back end.

17" stainless steel tube burner. Fits a variety of Sams Club models. Features unique flame hole "lip guard" on each side of the tube (helps to prevent food drippings from clogging the flame holes), an air adjustment shutter with set screw on the valve end and a mounting flange with off-center hole on the back end.

14-3/4" stainless steel tube burner. Fits a variety of Sams Club models. Features unique flame hole "lip guard" on each side of the tube (helps to prevent food drippings from clogging the flame holes), an air adjustment shutter with set screw on the valve end, mounting flange with centered hole on the back end and an attached igniter electrode mounting bracket.

48 count, high quality kiln dried Pyramid Ceramic Briquettes, each measuring 2in. x 2in. for a total of 192 sq. in. coverage. These high-performance briquettes feature a pyramid shape and hollowed core to increase radiant heat distribution. For use with briquette trays and racks, or an upgrade for grills that utilize lava rock grates.

Are your briquettes broken, cracked or caked with grease and contaminants?  These premium briquettes allow maintaining stable cooking temperatures with less gas, while protecting your burners.  Ceramic pyramid briquettes vaporize drippings from food, enchanting the flavor of your grilled dishes by creating flavorful smoke and vapor that infuse into the food.

What’s Included:

• 48 - Pyramid Shaped Ceramic Briquettes, 2in. x 2in.  (192 sq. in. coverage).

Compatibility:

• For use with Briquette Trays that utilize 2in. x 2in. briquettes, such as Lynx, Alfresco, Dynasty, GE Monogram and more.
• A serious upgrade from Lavarock; distribute briquettes evenly on grills that utilize heat grates.

High performance pyramid briquettes are a popular choice for many grillers seeking improved heat control, flavor enhancement, and extended grill life.

Box of 6 ceramic radiant flame tamers. Each piece measures 7" X 8". Fits many Members Mark, Sams Club, Bakers and Chefs and other brand models. Custom fit into flame tamer rack, Part BG-45, sold separately.

Heavy duty, nickel/chrome plated "Flame Tamer" (Ceramic Tile) rack. Measures 16-5/8" X 31". Designed to support 7" X 8" ceramic tiles, see part #97501 (sold separately).  Fits many Sams Club/Members Mark models. (Ceramic tiles not included, shown for display purposes only).

Heavy duty, nickel/chrome plated "Flame Tamer" (Ceramic Tile) rack. Measures 9" X 17-3/8". Designed to support ceramic tiles, part #GTFT. Fits many Sams Club/Members Mark and Grand Hall models. Ceramic tiles not included. (Replaces OEM Part# P01717002E).

Heavy duty, nickel/chrome plated "Flame Tamer" (Ceramic Tile) rack. Measures 17-1/4" X 33-7/16".  Designed to support 4-3/4" X 7-1/16" ceramic tiles, see part #GTFT (sold separartely).    Fits many Sams Club/Members Mark and Grand Hall models. Ceramic tiles not included, shown for display purposes only.   Replaces OEM Part P01722021B.  IMPORTANT: This rack was modified by Grand Hall.  It now holds the smaller 4-3/4" X 7-1/16" ceramic tiles instead of the larger 7" X 8" tiles and if desired the tiles can now cover the smoker box area.

Stainless steel tent shaped burner shield. Measures 16-13/16" long X 3-5/16" wide (measured across the bottom). Features single mounting hole at the peak of the tent, on each end. Fits many Brinkmann models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Box of 4 ceramic radiant flame tamers. Each piece measures 4-3/4" X 7-1/16". Fits many Members Mark/Sams Club, Grand Hall, Bakers and Chefs and other brands/models. Custom fit into flame tamer racks, Parts BG46 and BG47, sold separately.

Heavy guage 430 stainless steel heat distribution plate. Measures 17-3/4" long x 6-3/8" across the bottom. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 5" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 5-7/8" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Sams Club and Nexgrill stainless steel heat distribution shield. Features V-notches and round vent holes at each end of the shield. The shield measures 15-3/8" X 4-7/8". (For ease of measurement we measure the width from the bottom side.) IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Stainless steel heat distribution shield. Measures 17-5/16" front to back X 9-7/8" wide. Fits a variety of Nexgrill and Costco/Kirkland models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Stainless steel burner shield. The hanging flanges at the ends of the shield are bent up and out at a 90 degree angle. The main flat part of the shield measures 13-1/2" X 4". Total length measurement including the extended flange ends is 14-5/8" IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Members Mark burner heat distribution shield. Laser cut stainless steel. Dimensions are 8-1/4" wide X 16-1/8" long. More than one required. Sold individually. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Stainless steel burner shield. The shield measures 16-1/8" X 4-5/8". For ease of measurement we measure the width from the bottom side. Features slotted vent holes on each side of the plate. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Stainless steel burner shield. The hanging flanges at the ends of the shield are bent down and out at a 90 degree angle. The main flat part of the shield measures 15-3/8" X 4". Total length measurement including the extended flange ends is 16-1/2". IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Members Mark, stainless steel burner heat distribution shield. Dimensions are 8-7/16" wide X 11-7/8" long. Features mounting tab legs on each corner. More than one required. Sold individually. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Two piece, porcelain coated "matte finish" (non-gloss) cast iron cooking grate set. Each piece measures 12-3/8" wide x 18-7/8" front to back, for a total set width of 24-3/4".

Heavy duty 3 piece "matte finish" cast iron cooking grate set. Each section measures 18-3/4" front to back X 10-1/2" wide. For a total set width of 31-1/2".

17-5/16" X 29-3/4" solid 1/4" (304 Grade) stainless steel rod, three piece cooking grate set. All 3 pieces measure 17-1/4" front to back. Two pieces measure 9-3/4" wide and one piece (center piece) measures 10-1/4" wide, for a total set width of 29-3/4". Fits a variety of Sams Club/Members Mark and Charmglow grills, as well as many other brands/models.

Heavy duty, cast iron cooking grate holds heat, and cleans up easily thanks to its porcelain enamel matte finish and non-stick properties. One grate at 19-1/8in. x 12-3/8in. width. Measure you’re grills grate area to calculate the quantity of grates your grill requires.

Freshen up your grilling experience! Replace your cooking grates where the meat greets the heat with these heat-holding and robust solid cast iron cooking grates. Rust-resistant and easy to clean, thanks to their porcelain enameled finish. They make perfect sear marks and are great for everyday grilling for many seasons to come.

What’s Included:

• (1) 19-1/8in. x 12-3/8in. porcelain coated cast iron cooking grate.
• Sold individually, more than one required depending on grill size.

Heavy duty, porcelain enameled "matte finish" cast iron cooking grate. Measures 7-5/8" wide X 19-1/8" front to back. More than one required. Sold individually. Fits a variety of BBQ Galore/Turbo, Perfect Flame, Sams/Members Mark grills and many other brands/models.

Heavy duty, matte finish cast iron cooking grate. Measures 10-3/8" wide X 17-5/8" front to back. Normally used in sets of multiples of itself or along with part CG73P-CI. Sold individually.

Heavy duty, porcelain enameled "matte finish" cast iron cooking grate. Measures 10-3/8" wide X 19-1/4" front to back. More than one required. Sold individually. (Also available as a set of 3, see part CG69PCI-3).

Heavy duty, porcelain enameled "matte finish" cast iron, 3-piece cooking grate set. Fits Ducane Stainless Series 5-burner grills and a variety of other brands and models. Each section measures 19-1/4" front to back X 10-3/8" wide. Total surface area measurement of the set is 19-1/4" X 31-1/8".

Single piece, 5/16" diameter solid stainless steel rod (304 Grade), cooking grate. Fits Ducane Stainless Series 5-burner models and a variety of other brands/models. Measures 19-1/4" front to back X 10-3/8" wide. More than one required. Sold individually. (Also available as a 3 piece set, see part CG96SS-3).

3 piece stainless steel cooking grate set.  Sturdy 5/16" diameter solid stainless steel rod construction (304 grade).  Fits Ducane Stainless Series 5-burner models and a variety of other brands/models. Each piece measures 19-1/4" front to back X 10-3/8" wide. Total surface area measurement of the set is 19-1/4" X 31-1/8".

Rectangular slide out grease catch pan. Gray powder coat finish. Pan measures 10-7/8" long X 5-3/4" wide, (Measurement does not include handle).

Heavy gauge stainless steel grease tray for Members Mark grills. Measures 15-3/4" X 31-7/8". Features a centered oval drain opening with affixed catch pan support rails on the underside. (Catch pan not included, see part G516-6900-W1).

Fits models Y0005XC-2, Y0101XC.

Heavy gauge stainless steel grease tray for Members Mark grills. Measures 18-1/2" X 30-1/2" (including the front handle end extensions).

Fits models REGAL04ALP and REGAL04ANG.

Attractive black and chrome heat/gas Control Knob measures 2-5/16in. (dia. at base). Replaces an existing damaged, worn or broken heat control knob on bbq gas grills. Fit Kit included to secure knob to  6mm or 8mm “D” shaped gas valve stems at the proper stand-off height.

What’s Included:

• 1 Chrome and Black Gas Control Knob (plastic)
• 1 Fit Kit for proper installation (6 pc.)

Features:

• Attractive and easy-to-clean chrome heat control knob
• Fits 6mm or 8mm “D” shaped gas control valve stems
• 6 inserts to insure proper mounting to a variety of BBQ Gas Grills

Fitment:

• Fit Kit includes 6pc. inserts that allow for selecting knob "ON/OFF" position and a set screw with locking pressure tab.
• Variety of insert lengths for proper stand-off height: Flush, 1/4in., 1-1/2in. Inserts can be trimmed to your desired length for a professional fit.
• Click PDF in preview window for assembly instructions.

Jumper wire for closing off unused terminals on battery powered electronic ignition modules. Measures 6" long, (including the connectors). Features flat spade connectors with plastic protectors on each end.

Three output "AA" electronic ignition module with push button battery cap. Features 3 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.

Four output "AA" electronic ignition module with push button battery cap. Features 4 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.

47" Replacement wire with flat female spade connectors on each end. One end black shrink wrapped and the other with a square plastic protector.

3-5/8" long main burner igniter electrode with mounting bracket. Features a 90 degree bend electrode tip, 3" long white ceramic insulator with attached mounting bracket and a flat male spade wire terminal. Mounting hardware included. Fits a variety of Brinkmann, Kenmore, Master Forge, Members Mark/Sams Club models.

"AA" electronic igniter spark generator. Includes push button cap, internal battery connection spring and mounting locknut. Features two output terminals on back of the module.  Genuine Broilmaster Part.

Two output "AA" electronic ignition module with push button battery cap. Features 2 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Fits Charbroil Performance, Classic and Kenmore models as well as many other brands/models.

Push button battery cap with spring, for "AA" electronic ignition module. The cap features a soft rubber "push button" top. The diameter at the base of the cap measures 1-1/4".

Push button battery cap for MHP "AAA" electronic ignition module. Features chrome finish with black rubber push button top. Base diameter is: 1-5/16" Includes module mounting lock ring nut.

Stainless steel burner ignitor collector box and electrode assembly. Mounting stud length measures 2". Includes locking nuts as shown. Total length is 4" from the top to the bottom of the electrode. Wire connection at bottom takes a round connector.

Burner ignitor electrode with 90 degree bend electrode tip and flat male spade wire connector end.  The overall length measures 2-3/4" tip to tip.  The mounting bracket to the tip of the electrode measures 1-1/8".  Includes mounting screw, washers and nut.

20" igniter wire. Features flat female spade connectors on both ends.

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

• (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.

Universal gas grill 2 output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your 2 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

• (1) Universal Electronic Ignition Module with Push Button - 2 Output 

3 output "AAA" electronic spark generator. Features three male spade output wire terminals on the back side, clear epoxy encapsulated coil, module mounting lock ring and a push button battery cap. Requires a 3/4" or 13/16" mounting hole. Requires one "AAA" battery, not included.

Universal gas grill 4 output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your 4 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

• (1) Universal Electronic Ignition Module with Push Button - 4 Output

Universal 6 output "AA" ignition module with soft push button battery cap. Features 6 output terminals on the back. Mounting hole needs to be at least 7/8" diameter. Battery not included.

Universal gas grill Single Output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (1) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your Single Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

• (1) Universal Electronic Ignition Module with Push Button - 1 Output

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

• (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

• 1 On/Off Ball Valve Quick Connect Fitting
• Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 3/8" Gas Line Quick Connect Fitting

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

• 2-Stage Regulator and 30in. Hose Assembly which includes:
• 3/8in. ID high pressure hose, 30in. length.
• 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
• One 3/8in. to 3/4in. brass adapter included.  

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

• This timer accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
• Installation/operating instructions.

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

• Accommodates 1/2in. NPT piping (both ends).
• 100,000 BTU rating.
• Natural Gas or Propane.
• Quality FireMagic Part.

What’s Included:

• Automatic Gas Timer Assembly, 20/40/60min. durations. 
• Installation/operating instructions.

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

• 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

• 20/40/60 minute interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

• 1-2-3 hour interval gas valve timer.
• 100,000 BTU rating.
• Natural Gas or Propane.

Mounting Panel Box:

• Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
• Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
• Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
• Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
• Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

• Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
• Installation and operating instructions.
• Quality FireMagic Part.

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Genuine Weber Part. 

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

• (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
• Instruction sheet.

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

• (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
• Instruction sheet.
• Quality aftermarket part.

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

• 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
• Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

• Convertable to/from Natural Gas to/from Propane Gas Regulator
• 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
• Rated 1/2 PSIG.  

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.