Kenmore Grill Parts

grill parts: Push Button/Battery Cap For "AA" Electronic Ignition Module
Kenmore grill parts: Push Button/Battery Cap For "AA" Electronic Ignition Module (image #1) Kenmore grill parts: Push Button/Battery Cap For "AA" Electronic Ignition Module (image #2) Kenmore grill parts: Push Button/Battery Cap For "AA" Electronic Ignition Module (image #3)

Push Button/Battery Cap For "AA" Electronic Ignition Module

Item# G409-0030-W1
This part is in stock. IN STOCK
$4.99
Push button battery cap with spring, for "AA" electronic ignition module. The cap features a soft rubber "push button" top. The diameter at the base of the cap measures 1-1/4".

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

  • Qty:
Item# 4594006
"U" Shaped burner, 29 inches total length from the top of the "U" to the tube ends. Total width 4-3/4" at widest point of shield (width of burner is 4-3/8"). Includes burner shield, support bracket with mounting hardware. NOTE: Igniter "Not Available" for this burner and it is "not" compatible with the original igniter components.
In Stock
Retail: $79.58
$39.05
View
Add
Item# 80013421
15-7/8" long stainless steel tube burner. Narrow end which connects to the valve includes wire mesh spider guards. IMPORTANT: This burner uses a "screw" mounted style carry over tube.
In Stock
$11.99
View
Add
Item# 80016303
Stainless steel tube burner. Features insect screens at the valve end. Mounting end has slight 90 degree bend with centered mounting hole. Measures 15-7/8" long.
In Stock
$14.15
View
Add
Item# CIKO
Cast iron wide oval shaped cast iron burner. Dimensions are 3-3/8" wide X 12-7/8" long total length. The top flat portion of this burner measures 9-3/4". Fits a variety of Sears Kenmore premium grill models.
In Stock
Retail: $37.10
$20.99
View
Add
Item# CIKO2
Cast iron wide oval shaped cast iron burner. Dimensions are 3-3/8" wide X 14" long total length. The top flat portion measures 3-1/2" X 11". Fits a variety of Sears Kenmore premium grill models.
In Stock
Retail: $37.10
$20.99
View
Add
Item# CIKR
12-3/4" long cast iron bar burner (length measurement is total, "tip to tip"). The width measured across the top of the burner is  2-1/8".  The venturi pipe extends 3-3/4" from the main burner body and has a 1/2" diameter hole for the gas valve orifice stem.  Features a "tapered barrel body" and a mounting peg that is 10-7/8" from the end of the venturi pipe (valve end) to the center of the peg.  Mounting cotter pin is included.  Fits many Brinkmann, Sears/Kenmore and other brands.
In Stock
Retail: $31.00
$20.25
View
Add
Item# G431-0300-W2A
Stainless steel tube burner. Measures 14-3/8" long x 1" in diameter. Fits a variety of Charbroil, Kenmore and many other brands/models, which utilize a "screw mount" carry over tube. The venturi or valve end of the tube has an insect screen, air mixture screw and mounting holes for the electrode. The back end of the tube features a short 90 degree bend with a centered mounting screw hole and a hole for the carry over tube mounting screw. Mounting hardware included. Genuine Charbroil Part. (Replaces Part G431-0300-W2)
In Stock
$15.39
View
Add
Item# G432-Y700-W1
14-3/8" long X 1" diameter stainless steel tube burner. Features indentations for clamp-on style igniter and a carryover mounting stud screw. One cotter pin for mounting the carryover tube is included. The mounting flange end has a short 90 degree bend with a centered "slotted" mounting hole. Fits a variety of Charbroil Performance, Classic and Kenmore models. Genuine Charbroil Part.
In Stock
$11.33
View
Add
Item# G515-2200-W1
15-7/8" long X 1" diameter stainless steel tube burner. Features indentations for clamp-on style igniter. The mounting flange end has a short 90 degree bend with a centered "slotted" mounting hole. Crossover stud screw located at back end of tube. Crossover tube mounting hardware included(2 cotter pins and 1 stud screw).
In Stock
$11.99
View
Add
Item# KENMFT1
16-3/4" stainless steel tube burner. Features an air adjustment shutter. The mounting flange bends at 90 degrees and has a centered slotted hole. Fits many Kenmore and Master Forge models.
In Stock
Retail: $42.20
$24.39
View
Add
Item# SCTB1
Straight stainless steel tube burner. Burner features include an adjustable air shutter and a mounting flange welded to the side of the burner for the ignitor electrode. Measures 15-1/2" long. Mounting hole is centered on back end.
In Stock
Retail: $43.55
$22.55
View
Add
Item# SCTB2
15-1/2" X 4-3/4" stainless steel looped pipe burner. Fits a variety of Sams Club/Members Mark models. Burner measures 15-1/2" long (including the mounting tab extension at the back end) X 4-3/4" wide. Features an air mixture adjustment shutter at the valve end.
In Stock
Retail: $62.05
$31.75
View
Add
Item# SCTB3
Straight stainless steel tube burner. Burner has an adjustable air shutter. Measures 14-7/8" long. Mounting hole is centered on back end.
In Stock
Retail: $43.55
$22.55
View
Add
Item# 80005592
This  4-5/8" carryover tube mounts between the burners to carry flame and ignition over to the adjacent burner. Designed to fit Charbroil 1" diameter main burner tubes that require a "screw mounted" carryover channel.  The tube channel measures 4-5/8" long.  (This measurement is the tube length only, does not include the mounting tabs).   Genuine Charbroil Part.
In Stock
$6.49
View
Add
Item# 80015760
The flash tube mounts between the burners to carry flame and ignition over to the adjacent burner. Designed to fit Charbroil 1" diameter main burner tubes that require a "screw mounted" carryover channel. (Burners are not included and are shown for display purposes). Flash tube length is 5-5/8" not including screw tabs. Screws included.
In Stock
$4.99
View
Add
Item# G413-0004-W2
The flash tube mounts between the burners to carry flame and ignition over to the adjacent burner. Designed to fit Charbroil 1" diameter main burner tubes that require a "screw mounted" carryover channel.  Flash tube channel length is 5-1/2", not including the screw mounting tabs. Screws included.
In Stock
$3.59
View
Add
Item# G432-0078-W1
Stainless steel carryover tube. Tube channel measures 5-3/8" long. (this measurement is the tube channel length only, does not include the mounting tabs). Comes with 2 cotter pins. Designed to fit Charbroil 1" diameter burner tubes. Fits variety of  Kenmore, Thermos and Charbroil Performance and Classic models.
In Stock
$3.59
View
Add
Item# G515-0015-W1
Stainless steel carryover tube. Tube channel measures 4-1/2" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins.  Designed to fit Charbroil 1" diameter burner tube.
In Stock
$3.99
View
Add
Item# 80029723
16" long X 3-3/4" wide porcelain coated steel flame tamer. Features two raised mounting tabs at each end. Replaces older part numbers G501-0008-W1, 80006357 and 80003332. Genuine Charbroil Part.
In Stock
$9.99
View
Add
Item# BBQHP1

BBQ Grillware Stainless Steel Heat Distribution Burner Shield. Fits BBQ Grillware models GGPL-2100, GSC-2418 AND GSC-2418N. Features a unique tapered and sloped end-to-end design for heat transfer efficiency. Designed to protect the burner, vaporize food drippings and create an even cooking surface temperature.

Measurements:

  • Length: 16-1/8in. (including mounting tabs). 
  • Width measured across the bottom edges: Side one measures (3-5/8in.) tapers to opposite side (3-1/4in.)
  • Peak with Taper: 2in. at one end, slopes to 1-1/2in. opposite side.

Fitment:

  • Fits BBQ Grillware models GGPL-2100, GSC-2418 AND GSC-2418N.
  • IMPORTANT: Remove protective plastic film (if present) from product prior to use.

BBQ Grillware Stainless Steel Heat Distribution Burner Shields act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Carefully engineered with a tapered and sloped design to move heat directionally and vaporize drippings and infuse your food with that smoky, savory goodness that’ll have your taste buds singing with joy.

In Stock
Retail: $28.80
$21.36
View
Add
Item# BMHP8
Louvered heat tent measures 15-3/8" long X 3-5/8" wide (measured across the bottom). Features four louver vents on the top of the shield. Stainless steel. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $30.10
$21.94
View
Add
Item# G430-0005-W1
Porcelain coated vented heat tent. Measures 14-5/8" long (including end tabs) X 4-1/4" measured across the bottom.
In Stock
$6.49
View
Add
Item# G432-0096-W1
Porcelain coated "Flame Tamer" or "Burner Shield". Measures 4-1/4" wide X 14-7/8" long. Features 16 vent holes in each end. (width measurement is from edge to edge with the shield upside down and length is extreme tip to tip including the mounting tabs).
In Stock
$9.99
View
Add
Item# G518-0010-W1
Porcelain coated flame tamer. Measures 16" long X 5-3/4" wide. Features unique center segment tab extension. Fits a variety of Sears/Kenmore models. Replaces OEM Part 80018323.
In Stock
$5.99
View
Add
Item# G524-0032-W1
16-1/8" porcelain coated heat plate. Features a centered tongue mounting extension on one end. Main plate area measures 6-3/4" X 14-5/8. Dimensions, including extension are, 6-3/4" X 16-1/8". Sold individually.
In Stock
$10.99
View
Add
Item# KENHP1
Stainless steel heat plate. Measures 13-1/8" X 10-3/4". Fits many Kenmore models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $67.55
$39.99
View
Add
Item# KENHP3
Stainless steel tent shaped heat plate. Measures 14-15/16" long X 3-3/4" wide. Features 3 vents on each side of the plate. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $31.20
$17.59
View
Add
Item# KENHP6
Stainless steel tent shaped heat plate. Measures 11-7/8" long X 4-1/8" wide". Features vent holes at each end. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $26.10
$15.47
View
Add
Item# KENHP7
Stainless steel "vented" tent shaped heat plate. Measures 17-7/8" long X 4" wide. Features 6 vents, 3 on each side of the peak. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $34.00
$18.80
View
Add
Item# KENMFHP1
Stainless steel heat shield. Measures 15-5/8" long X 4-1/8" wide.  Features unique rounded top.  Fits many Kenmore and Master Forge models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $28.35
$16.59
View
Add
Item# NGKHP1
Stainless steel heat distribution shield. Measures 15-1/8" long X 4-1/8" wide. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $29.50
$17.02
View
Add
Item# PFHP2
Stainless steel, tent shaped burner shield. Measures 16" long X 4" wide (measured across the bottom). Features 4 slots and 4 vents on each side of the tent. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $35.40
$17.79
View
Add
Item# SCHP2
Members Mark burner heat distribution shield. Laser cut stainless steel. Dimensions are 8-1/4" wide X 16-1/8" long. More than one required. Sold individually. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $39.60
$22.75
View
Add
Item# SCHP4
Stainless steel burner shield. The hanging flanges at the ends of the shield are bent down and out at a 90 degree angle. The main flat part of the shield measures 15-3/8" X 4". Total length measurement including the extended flange ends is 16-1/2". IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $38.05
$21.02
View
Add
Item# 348-2BR
Two section stainless steel cooking grate and emitter tray set. Includes 2 grates that measure 17" long X 8-1/2" wide (part ICG6613) and 2 emitter trays that measure 18-3/8" X 8-3/4" wide (part IET8898). Measurement of each section with grate in tray is 8-3/4" wide X 18-3/8" front to back. Total set width is 17-1/2".  Fits many Pre-2015 Charbroil Tru-Infrared 2 Burner Models.
In Stock
Retail: $176.00
$89.99
View
Add
Item# 348-3BR
Three section stainless steel cooking grate and emitter tray set. Includes 3 grates(part ICG6613) and 3 trays(part IET8898). Measurement of each section with grate in tray is 18-3/8" front to back X 8-3/4" wide. Total set width is 26-1/4". Fits many Pre-2015 Charbroil Tru-Infrared 3 Burner Models.
In Stock
Retail: $264.00
$134.99
View
Add
Item# 348-4BR
Four section stainless steel cooking grate and emitter tray set. Includes 4 grates that measure 17" long X 7-1/2" wide (part ICG2121) and 4 emitter trays that measure  18-3/8" long X 7-5/8" wide (part IET5532). Measurement of each section with grate in tray is 7-5/8" wide X 18-3/8" front to back.  Total set width is 30-1/2".  Fits many Pre-2015 Charbroil Tru-Infrared 4 Burner Models.
SOLD OUT: Expected In Stock 12/6/2024
Retail: $344.20
$176.99
View
Item# 5S574
Stamped stainless steel cooking grate set. Set includes 4 grate sections. Individual measurements of the sections are 7-3/4" wide X 18-3/8" front to back. Total width is 31".
In Stock
Retail: $207.59
$102.26
View
Add
Item# 62152

2pc. Heavy duty, cast iron cooking grates hold heat, and clean up easily thanks to its porcelain enamel finish and non-stick properties. Two grates at 19-3/16in. x 12-3/8in. each in a set that offers a total of 24-3/4in. x 19-3/16in. coverage.

Freshen up your grilling experience! Replace your cooking grates where the meat greets the heat with these heat-holding and robust solid cast iron cooking grates. Rust-resistant and easy to clean, thanks to their porcelain enameled finish. They make perfect sear marks and are great for everyday grilling for many seasons to come.

What’s Included:

  • (1) Two piece porcelain coated cast iron cooking grate set.
  • Grate Sections Measure: 19-3/16in. x 12-3/8in. each.
  • Total Grate Coverage:  24-3/4in. x 19-3/16in.
In Stock
Retail: $156.73
$75.53
View
Add
Item# 64103
17-5/8" X 26-5/8" three piece, "gloss finish", porcelain enameled cast iron cooking grate set. Each section measures 17-5/8" front to back X 8-7/8" wide for a total set width of 26-5/8".
In Stock
Retail: $128.58
$68.99
View
Add
Item# 64103-1
"Gloss finish" porcelain enameled cast iron cooking grate. Measures 17-5/8" front to back X 8-7/8" wide.  Sold individually.
In Stock
Retail: $42.86
$24.99
View
Add
Item# 65993
Heavy duty 3 piece, matte finish cast iron cooking grate set. Each piece measures 18-1/8" front to back X 9 7/8" wide for a total set width of 29-5/8". Features side edge finger notches for easy installation and removal.
In Stock
Retail: $263.69
$109.12
View
Add
Item# 66123
Porcelain-enameled "gloss finish" cast iron cooking grate "3 piece set". Each section measures 16-7/8" front to back X 8-1/4" wide. For a total set width of 24-3/4". Features "finger notch" on all sides for easy installation and removal. Fits many Charbroil Red and Gourmet Infrared models. Also fits some Kenmore grills.
In Stock
Retail: $152.26
$72.63
View
Add
Item# 66652
Heavy duty 2 piece, matte finish cast iron cook grate set. Each grate measures 18-5/16" front to back X 13-1/8" wide. Total measurement is 18-5/16" X 26-1/4".
In Stock
Retail: $194.85
$89.34
View
Add
Item# CG111PCI
Infrared cast iron cooking grate "top piece". Measures 8-1/4" wide X 18-1/4" front to back. This grate is designed to fit onto a matching emitter tray, part # CG111SS (sold separately). This is the cast iron grate only. More than one required, sold individually. Fits a variety of Charbroil "2 and 3" Burner Tru-Infrared models, pre 2015. IMPORTANT: Please measure your old parts to assure fit. Replaces Charbroil OEM Part 80021355.
In Stock
Retail: $53.10
$36.84
View
Add
Item# CG111SS
Stainless steel Tru-Infrared emitter grate (cooking grate bottom perforated piece). Measures 18-3/8" front to back X 8-7/8" wide. This emitter grate is designed to pair with a cast iron cooking grate top piece, part #CG111PCI (sold separately). This is the emitter grate only. Fits a variety of "2" and "3" Burner Charbroil Tru-Infrared models, pre 2015. More than one required, sold individually. IMPORTANT: Please measure your old parts to assure fit. Replaces OEM Part 80021356.
In Stock
Retail: $24.50
$19.53
View
Add
Item# CG46SS
14-3/4" X 26-5/8" single piece stainless steel rod cooking grid. Features solid stainless steel rod construction. Measures 14-3/4" front to back X 26-5/8" wide. Fits Charbroil/Kenmore 8000 Series grills and many other brands/models.  Replaces Charbroil OEM Part 4152741.
In Stock
Retail: $87.10
$65.99
View
Add
Item# CG73P-CI
"Matte finish" porcelain enameled cast iron cooking grate. Measures 8-3/4" wide X 17-5/8" front to back.  Sold individually.
In Stock
Retail: $52.30
$31.30
View
Add
Item# CG74PCI
Single piece,porcelain coated "matte finish" cast iron cooking grate. Measures 16-7/8" front to back X 8-1/4" wide. Features "finger notch" on the sides for easy installation and removal. Fits a variety of Charbroil, Kenmore and many other brand/models. more than one required.
In Stock
Retail: $40.70
$29.79
View
Add
Item# CG97SS
Stamped stainless steel cooking grate. Measures 8-3/4" wide X 18-3/8" long. Features "slotted" grease drain holes for improved performance. Fits many 2 and 3 burner Charbroil Infrared models. More than one required. Also available in 2 and 3 piece sets, see parts CG97SS-2 and CG97SS-3.
In Stock
Retail: $42.30
$24.85
View
Add
Item# CG97SS-2
Stamped stainless steel 2 piece "Infrared" cooking grate set. Includes 2 grate sections. Each section measures 8-3/4" wide X 18-3/8" front to back. Total set width is 17-1/2". These grates feature "slotted" grease drain holes for improved performance.
In Stock
Retail: $84.60
$48.85
View
Add
Item# CG97SS-3
Stamped stainless steel 3 piece "Infrared" cooking grate set. Includes 3 grate sections. Each section measures 8-3/4" wide X 18-3/8" front to back. Total set width is 26-1/4". These grates feature "slotted" grease drain holes for improved performance.
In Stock
Retail: $126.90
$85.15
View
Add
Item# G432-001N-W1
Porcelain coated "Matte Finish" cast iron cooking grate. Measures 16-7/8" front to back X 9-3/8" wide. Features finger notches on each side for easy removal/installation. Fits Charbroil Advantage 6 burner models (2015 and newer), as well as many other brands/models.
In Stock
$23.99
View
Add
Item# G519-A400-W1
Infrared perforated stainless steel cooking grate. Measures 8-3/4" wide X 18-3/8" front to back. More than one required, sold individually. Original Charbroil Equipment.
In Stock
$41.78
View
Add
Item# G520-8900-W1
Infrared perforated stainless steel cooking grate. Measures 7-3/4" wide X 18-3/8" front to back. More than one required, sold individually. Original Charbroil Equipment.
In Stock
$34.99
View
Add
Item# ICG2121
Stainless steel infrared cooking grate. Measures 17" front to back X 7-1/2" wide. This grate is designed to pair with a housing emitter tray, see part IET5532 (sold separately). This is the cooking grate only. Fits a variety of Charbroil "4" Burner Tru-Infrared models, pre 2015. IMPORTANT: Please measure your old parts for accuracy More than one required, sold individually. Replaces Charbroil OEM Part 3482121.
SOLD OUT: Expected In Stock 11/30/2024
$20.99
View
Item# ICG6613
Stainless steel Charbroil Tru-Infrared cooking grate. Measures 17" front to back X 8-1/2" wide. This grate is designed to pair with a housing emitter tray, see part # IET8898 (sold separately). This is the "cooking grate" only. Fits a variety of "2 and 3" Burner Charbroil Tru-Infrared models, pre 2015. IMPORTANT: Please measure your old parts for accuracy. More than one required, sold individually. Replaces Charbroil OEM Part 3486613.
In Stock
$26.99
View
Add
Item# IET5532
Stainless steel Tru-Infrared cooking grate "emitter tray" (bottom perforated piece). Measures 18-3/8" front to back X 7-5/8" wide. Fits a variety of Charbroil Tru-Infrared "4" burner models, pre 2015. This housing tray is designed to pair with a 7-1/2" wide cooking grate, see part ICG2121 (sold separately). IMPORTANT: Please measure your old parts to assure fit. This is the "emitter tray" only. More than one required, sold individually. Replaces Charbroil OEM Part 3485532.
In Stock
$21.99
View
Add
Item# IET8898
Stainless steel Tru-Infrared cooking grate "emitter tray" (bottom perforated piece). Measures 18-3/8" front to back X 8-3/4" wide. Fits a variety of Charbroil Tru-Infrared "2 and 3" burner models, pre 2015. This housing tray is designed to pair with a 8-1/2" wide stainless steel cooking grate, see part ICG6613 (sold separately). IMPORTANT: Please measure your old parts to assure fit. This is the "emitter tray" only. More than one required, sold individually. Replaces Charbroil OEM Part 3488898.
In Stock
Retail: $47.50
$22.99
View
Add
Item# 02342

Attractive black and chrome heat/gas Control Knob measures 2-5/16in. (dia. at base). Replaces an existing damaged, worn or broken heat control knob on bbq gas grills. Fit Kit included to secure knob to  6mm or 8mm “D” shaped gas valve stems at the proper stand-off height.

What’s Included:

  • 1 Chrome and Black Gas Control Knob (plastic)
  • 1 Fit Kit for proper installation (6 pc.)

Features:

  • Attractive and easy-to-clean chrome heat control knob
  • Fits 6mm or 8mm “D” shaped gas control valve stems
  • 6 inserts to insure proper mounting to a variety of BBQ Gas Grills

Fitment:

  • Fit Kit includes 6pc. inserts that allow for selecting knob "ON/OFF" position and a set screw with locking pressure tab.
  • Variety of insert lengths for proper stand-off height: Flush, 1/4in., 1-1/2in. Inserts can be trimmed to your desired length for a professional fit.
  • Click PDF in preview window for assembly instructions.
In Stock
Retail: $19.55
$10.45
View
Add
Item# G206-0025-W1
6" diameter black plastic wheel. Features a 3/8" diameter axle hole, 1-5/8" long axle hub and 1-1/2" wide tire tread. Fits a variety of Charbroil, Kenmore, Thermos and many other Brands/Models. Sold individually. Genuine Charbroil Part.
In Stock
$4.99
View
Add
Item# G350-0024-W2
Non-locking swivel caster with 2-3/4" wheel. Attaches by 7/16" stud end. Sturdy steel frame. (Replaces G350-0024-W1). Genuine Charbroil Part.
In Stock
$9.99
View
Add
Item# G408-0036-W1
Caster socket insert for rectangular steel tube legs. Surface dimension where the caster screws in is 1" X 2". Insert is 2-1/16" top to bottom. Accepts 7/16" threaded caster.
In Stock
$3.99
View
Add
Item# G437-0037-W1
7" diameter black plastic wheel. Features a 5/16" diameter axle hole, 1-3/4" long axle hub and 1-7/8" wide tire tread. Fits a variety of Charbroil, Kenmore and many other Brands/Models.  Sold individually.  Genuine Charbroil Part.
In Stock
$5.99
View
Add
Item# G515-0082-W1
Locking swivel caster with 2-3/4" wheel. Features On/Off foot lever for locking caster wheel. Sturdy steel frame. Attaches by 7/16" stud end.
In Stock
$6.99
View
Add
Item# 100700-168

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

  • (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.
In Stock
$76.99
View
Add
Item# 104007

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

  • 1 On/Off Ball Valve Quick Connect Fitting
  • Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.
In Stock
$32.99
View
Add
Item# 104406

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 3/8" Gas Line Quick Connect Fitting
In Stock
$23.34
View
Add
Item# 106238-30

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

  • 2-Stage Regulator and 30in. Hose Assembly which includes:
  • 3/8in. ID high pressure hose, 30in. length.
  • 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
  • One 3/8in. to 3/4in. brass adapter included.  
In Stock
$49.99
View
Add
Item# 3090

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

  • This timer accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3090-01

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.
In Stock
Retail: $20.00
$18.00
View
Add
Item# 3092

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

  • Accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer Assembly, 20/40/60min. durations. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3092-01

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.
In Stock
Retail: $26.00
$23.40
View
Add
Item# 5520-11T

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

  • 20/40/60 minute interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $247.00
$222.30
View
Add
Item# 5520-13T

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

  • 1-2-3 hour interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box:

  • Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $239.00
$215.10
View
Add
Item# 65941

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
In Stock
Retail: $35.29
$33.00
View
Add
Item# 99281

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
SOLD OUT: Expected In Stock 11/30/2024
Retail: $36.99
$34.95
View
Item# HR4B

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

  • (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $37.65
$28.20
View
Add
Item# HR5B

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
  • Instruction sheet.
In Stock
Retail: $68.25
$39.38
View
Add
Item# HR7B

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $43.20
$28.86
View
Add
Item# NG10

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $82.99
$54.04
View
Add
Item# NG12

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $86.99
$60.94
View
Add
Item# NG14

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $93.99
$65.84
View
Add
Item# PR-SU

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

  • Convertable to/from Natural Gas to/from Propane Gas Regulator
  • 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
  • Rated 1/2 PSIG.  
In Stock
$20.59
View
Add
Item# RGB

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

In Stock
Retail: $11.35
$7.95
View
Add
Item# 03333
Three output "AA" electronic ignition module with push button battery cap. Features 3 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.
In Stock
$18.57
View
Add
Item# 03340
Four output "AA" electronic ignition module with push button battery cap. Features 4 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Battery not included.
In Stock
Retail: $37.92
$17.92
View
Add
Item# 04022
3-5/8" long main burner igniter electrode with mounting bracket. Features a 90 degree bend electrode tip, 3" long white ceramic insulator with attached mounting bracket and a flat male spade wire terminal. Mounting hardware included. Fits a variety of Brinkmann, Kenmore, Master Forge, Members Mark/Sams Club models.
In Stock
Retail: $7.97
$4.41
View
Add
Item# 04430
Main burner electrode with molded in 43" long wire that terminates with a female flat spade fitting.  Also includes an adapter wire with male spade and female round end fittings that will allow for connecting to either an electronic or a manual (rotary or push button) spark generator.  Features a 2-7/8" long white ceramic insulator with a 90 degree electrode tip and an in-line mounting tab with 2 screw holes. This electrode is designed to mount directly onto the main burner tube. Mounting hardware "not" included. Fits many Charbroil, Master Forge and Kenmore models as well as many other brands/models.
In Stock
Retail: $14.09
$6.95
View
Add
Item# 4153196
Ignitor wire with two round connectors. Measure 11 inches long. (NOTE: The terminal ends of the wire can be forced onto a flat spade, if needed.)
In Stock
$3.39
View
Add
Item# 4153713
Snap-In ignitor push button for units without side burners. (Single pole. Uses one wire.) Wire not included.
In Stock
$5.99
View
Add
Item# 70401
"Snap-in" 2 pole manual push button igniter. Features two wire connection terminals, one "round" at bottom and one "flat spade" on the side. Mounts to grill with "Snap In" tabs. Fits Weber Q100/Q1000-Q200/2000 (main burner spark generator), Summit 400/600 Series 2007 and Newer (side burner spark generator) as well as many other brands/models. Genuine Weber Part.
In Stock
$7.79
View
Add
Item# G409-0021-W1
Two output "AA" electronic ignition module with push button battery cap. Features 2 male flat spade output terminals on the back, mounting lock-ring nut, black plastic battery cap with spring and soft rubber push button top. Fits Charbroil Performance, Classic and Kenmore models as well as many other brands/models.
In Stock
$10.99
View
Add
Item# G409-0030-W1
Push button battery cap with spring, for "AA" electronic ignition module. The cap features a soft rubber "push button" top. The diameter at the base of the cap measures 1-1/4".
In Stock
$4.99
View
Add
Item# G432-0026-W1
Plastic battery cap with spring and soft push button top for "AAA" ignition modules. Diameter of the cap at its base is 1".
In Stock
$4.99
View
Add
Item# G501-0010-W1
Main burner electrode with insulated wire and mounting bracket. Wire terminates with a female spade connector and is 12" in length. Electrode is 4-1/8" long and tip bends 90 degrees towards the burner.  Mounting screws included.
In Stock
$4.99
View
Add
Item# IG18B
20" igniter wire. Features flat female spade connectors on both ends.
In Stock
Retail: $4.05
$2.85
View
Add
Item# IG7B

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

  • (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.
In Stock
Retail: $3.70
$2.79
View
Add
Item# IGEIB4B

Universal gas grill 4 output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your 4 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Universal Electronic Ignition Module with Push Button - 4 Output
SOLD OUT: Expected In Stock 12/6/2024
Retail: $35.20
$20.57
View
Item# UP7B

Piezo Ignition Push Button Spark Ignitor with Palnut (lock nut) threaded mounting. Universal part that fits an unbelievable assortment of gas grill brands and outdoor appliances. Plunger push button with double pole: flat side connector and round bottom connector.

What’s Included:
(1) Piezo Ignition Plunger Push Button Ignitor Spark Generator and Palnut Lock Nut.

In Stock
Retail: $8.50
$5.70
View
Add
Item# G517-0800-W1
4-5/8" Deep Char-Broil RED radiant trough. Measures 17-1/2" front to back X 25-3/4" wide and is 4-5/8" deep (measured from the side edge).  Fits some models that use a "single" full width trough design. Features round peg style mounting legs.
SOLD OUT: Expected In Stock 11/30/2024
$38.99
View
Item# 5884694
Charbroil universal grease drip cup and hanging clip. Cup measures 3-3/4" in diameter. Features an aluminum cup with a steel hanging clip.
In Stock
$5.49
View
Add