Vermont Castings Grill Parts

grill parts: Propane Regulator and Dual (2) Hose Assy. (2 x 22in.)
Vermont Castings grill parts: Propane Regulator and Dual (2) Hose Assy. (2 x 22in.) (image #1) Vermont Castings grill parts: Propane Regulator and Dual (2) Hose Assy. (2 x 22in.) (image #2) Vermont Castings grill parts: Propane Regulator and Dual (2) Hose Assy. (2 x 22in.) (image #3) Vermont Castings grill parts: Propane Regulator and Dual (2) Hose Assy. (2 x 22in.) (image #4)

Propane Regulator and Dual (2) Hose Assy. (2 x 22in.)

Item# HR5B
This part is in stock. IN STOCK
Retail: $68.25
$39.38

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
  • Instruction sheet.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

  • Qty:
Item# 13101
Stainless steel tube burner with 30 degree angled end. Total burner length "measured in a straight line" from tip to tip is 17-1/8". Features a venturi end spider screen, adjustable air shutter and a welded on heat shield flange.
In Stock
Retail: $41.38
$23.04
View
Add
Item# VTB1
Stainless steel "straight" tube burner measures 17-1/4" tip to tip. The mounting end bends 90 degrees. Features an air adjustment shutter and a welded on heat shield flange.
In Stock
Retail: $44.95
$26.59
View
Add
Item# NGSHP3
Stainless steel heat distribution shield. Measures 17-5/16" front to back X 8-1/4" wide. Fits a variety of Nexgrill, JennAir, Vermont Casting and Costco/Kirkland models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $50.25
$29.49
View
Add
Item# VCHP1
Stainless steel heat distribution shield. Measures 14-1/2" front to back X 7-1/4" wide. Sold individually, more than one are used on the grill. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $51.70
$25.50
View
Add
Item# CG59P-CI
9" X 16-3/8" porcelain enameled "matte finish", cast iron cooking grate. Fits a variety of Vermont Casting and many other brand/models.
In Stock
Retail: $47.80
$35.49
View
Add
Item# 02342

Attractive black and chrome heat/gas Control Knob measures 2-5/16in. (dia. at base). Replaces an existing damaged, worn or broken heat control knob on bbq gas grills. Fit Kit included to secure knob to  6mm or 8mm “D” shaped gas valve stems at the proper stand-off height.

What’s Included:

  • 1 Chrome and Black Gas Control Knob (plastic)
  • 1 Fit Kit for proper installation (6 pc.)

Features:

  • Attractive and easy-to-clean chrome heat control knob
  • Fits 6mm or 8mm “D” shaped gas control valve stems
  • 6 inserts to insure proper mounting to a variety of BBQ Gas Grills

Fitment:

  • Fit Kit includes 6pc. inserts that allow for selecting knob "ON/OFF" position and a set screw with locking pressure tab.
  • Variety of insert lengths for proper stand-off height: Flush, 1/4in., 1-1/2in. Inserts can be trimmed to your desired length for a professional fit.
  • Click PDF in preview window for assembly instructions.
In Stock
Retail: $19.55
$10.45
View
Add
Item# GGEIBPB
Push button battery cap for MHP "AAA" electronic ignition module. Features chrome finish with black rubber push button top. Base diameter is: 1-5/16" Includes module mounting lock ring nut.
In Stock
Retail: $7.15
$4.90
View
Add
Item# GGK9
Replacement "knob" for manual "rotary" igniter/spark generators with "round" knob shaft. Measures 1-3/4" in diameter and features "molded in" directional arrow graphics.  IMPORTANT: This is the "knob" only.
In Stock
Retail: $4.55
$3.00
View
Add
Item# IG-20
Burner ignitor electrode with 90 degree bend electrode tip and flat male spade wire connector end.  The overall length measures 2-3/4" tip to tip.  The mounting bracket to the tip of the electrode measures 1-1/8".  Includes mounting screw, washers and nut.
In Stock
Retail: $6.75
$4.60
View
Add
Item# IG18B
20" igniter wire. Features flat female spade connectors on both ends.
In Stock
Retail: $4.05
$2.85
View
Add
Item# IG7B

20in. Red Igniter Wire with one insulated female Spade terminal on one end, to one insulated female Round terminal on opposite end.

What’s Included:

  • (1) 20in. Igniter Wire for Weber Grills and Other Brands that require flat female spade to round female terminal connection points.
In Stock
Retail: $3.70
$2.79
View
Add
Item# IGEIB2B

Universal gas grill 2 output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your 2 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Universal Electronic Ignition Module with Push Button - 2 Output 
SOLD OUT: Expected In Stock 12/6/2024
Retail: $35.20
$22.92
View
Item# IGEIB3B
3 output "AAA" electronic spark generator. Features three male spade output wire terminals on the back side, clear epoxy encapsulated coil, module mounting lock ring and a push button battery cap. Requires a 3/4" or 13/16" mounting hole. Requires one "AAA" battery, not included.
In Stock
Retail: $35.20
$20.92
View
Add
Item# IGEIB4B

Universal gas grill 4 output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (2) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your 4 Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Universal Electronic Ignition Module with Push Button - 4 Output
SOLD OUT: Expected In Stock 12/6/2024
Retail: $35.20
$20.57
View
Item# IGEIB6B
Universal 6 output "AA" ignition module with soft push button battery cap. Features 6 output terminals on the back. Mounting hole needs to be at least 7/8" diameter. Battery not included.
In Stock
Retail: $35.20
$20.92
View
Add
Item# IGEIBB

Universal gas grill Single Output electronic ignition module with push button cap that utilizes one AAA Battery (not included).  Features a soft rubber top push-button with chrome finish bezel and mounting lock ring, clear epoxy encapsulated coil, (1) male spade output terminals on the back side.

Requires a 3/4in. or 13/16in. mounting hole.

Why a new electronic ignition module? You go to fire up the grill and all you get is silence. No spark, no flame, just disappointment. Why do these ignition modules decide to throw in the towel? Environmental factors – moisture, heat, and grease can all take their toll on delicate electronic components, causing them to malfunction. Insufficient voltage or fluctuations in electrical current can lead to failure. Like all electronic components, ignition modules have a finite lifespan. Replace your Single Output Port Electronic Ignition Module and light your way to a better grilling experience!

What’s Included:

  • (1) Universal Electronic Ignition Module with Push Button - 1 Output
In Stock
Retail: $35.20
$20.92
View
Add
Item# UP-6B
Two outlet "rotary" spark generator with knob and mounting screws. Features 2 round post output terminals. This piezo style spark generator does not require a battery.
In Stock
Retail: $18.15
$12.15
View
Add
Item# UP5B
Single pole(one output terminal), rotary spark generator with knob. Distance, center to center, between the mounting screw holes measures 1-3/8". Mounting hardware, 2 screws, included.
In Stock
Retail: $16.90
$11.90
View
Add
Item# UP7B

Piezo Ignition Push Button Spark Ignitor with Palnut (lock nut) threaded mounting. Universal part that fits an unbelievable assortment of gas grill brands and outdoor appliances. Plunger push button with double pole: flat side connector and round bottom connector.

What’s Included:
(1) Piezo Ignition Plunger Push Button Ignitor Spark Generator and Palnut Lock Nut.

In Stock
Retail: $8.50
$5.70
View
Add
Item# UP8B
"Rotary" spark generator with three outlets. Includes knob and screws. Screw mounting holes are 1-3/8" center to center.
In Stock
Retail: $23.35
$15.99
View
Add
Item# VCDP1
Heavy gauge stainless steel drip pan for "Vermont Castings" grills. Measures 9-1/2" X 22". The bottom of the pan is sloped to one end, where the drain hole is located. Fits models CF9030LP, VM400XBP, VM450SSN, CF9030, SF9030, VM400, VM450, CF9080, VM448 and CF9055.
SOLD OUT: Expected In Stock 7/25/2024
Retail: $135.00
$78.65
View
Item# VCDP2
Heavy gauge stainless steel drip pan for "Vermont Castings" grills. Measures 9" X 25". The bottom of the pan is sloped to one end, where the drain hole is located. Fits models CF9055, CF90553A, CF90553B, CF9055LP, CF9056, CF90853A, VCS4000, VCS4005, VCS4005C, VCS4006, VCS4007, VCS4017, VCS4027, VCS4037, VCS4106, VM4500SSP, VM450SSP, VM456. (Replaces OEM Part# 50001842)
In Stock
Retail: $135.00
$80.15
View
Add
Item# VCDP3
Heavy gauge stainless steel drip pan for "Vermont Castings" grills. Measures 9" X 33-3/4". The bottom of the pan is sloped to one end, where the drain hole is located. Fits models CF9085, CF9085LP, CF9086, VCS5000, VCS5005, VCS5006, VCS5007, VCS5010, VCS5016, VCS5017, VCS5026, VCS5027, VCS5036, VCS5037, VM600, VM606.
In Stock
Retail: $141.75
$82.99
View
Add
Item# 100700-168

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

  • (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.
In Stock
$76.99
View
Add
Item# 104007

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

  • 1 On/Off Ball Valve Quick Connect Fitting
  • Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.
In Stock
$32.99
View
Add
Item# 104406

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 3/8" Gas Line Quick Connect Fitting
In Stock
$23.34
View
Add
Item# 106238-30

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

  • 2-Stage Regulator and 30in. Hose Assembly which includes:
  • 3/8in. ID high pressure hose, 30in. length.
  • 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
  • One 3/8in. to 3/4in. brass adapter included.  
In Stock
$49.99
View
Add
Item# 3090

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

  • This timer accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3090-01

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.
In Stock
Retail: $20.00
$18.00
View
Add
Item# 3092

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

  • Accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer Assembly, 20/40/60min. durations. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3092-01

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.
In Stock
Retail: $26.00
$23.40
View
Add
Item# 5520-11T

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

  • 20/40/60 minute interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $247.00
$222.30
View
Add
Item# 5520-13T

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

  • 1-2-3 hour interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box:

  • Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $239.00
$215.10
View
Add
Item# 65941

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Replaces #7502 Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • 1 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
In Stock
Retail: $35.29
$33.00
View
Add
Item# 99281

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
SOLD OUT: Expected In Stock 11/30/2024
Retail: $36.99
$34.95
View
Item# HR4B

5/16in. ID propane/LP gas hose in 24 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality aftermarket part at a cost effective price.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace your faulty regulator and hose with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly from Grillparts.com today!

What’s Included:

  • (1) 5/16in. x 24in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $37.65
$28.20
View
Add
Item# HR5B

5/16in. ID propane/LP gas hose. 2 (dual) 22 inch length hoses with a brass 3/8in. female hex nut flare connectors, assembled to a single propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Created for gas grills requiring a second feed hose for a side burner, etc. 

Are your gas lines cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) Dual Hose Regulator Assy, with (2) 5/16in. x 22in. hoses with single attached regulator with integrated QCC1 to-tank connection.
  • Instruction sheet.
In Stock
Retail: $68.25
$39.38
View
Add
Item# HR7B

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $43.20
$28.86
View
Add
Item# NG10

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $82.99
$54.04
View
Add
Item# NG12

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $86.99
$60.94
View
Add
Item# NG14

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $93.99
$65.84
View
Add
Item# PR-SU

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

  • Convertable to/from Natural Gas to/from Propane Gas Regulator
  • 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
  • Rated 1/2 PSIG.  
In Stock
$20.59
View
Add
Item# RGB

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

In Stock
Retail: $11.35
$7.95
View
Add