Weber Genesis 2011 - 16 EP/S 310, 320 & 330 Grill Parts

grill parts: Propane Regulator and Single Hose Assy. (40in.)
 2011 Genesis 300 grill parts: Propane Regulator and Single Hose Assy. (40in.) (image #1)  2011 Genesis 300 grill parts: Propane Regulator and Single Hose Assy. (40in.) (image #2)  2011 Genesis 300 grill parts: Propane Regulator and Single Hose Assy. (40in.) (image #3)

Propane Regulator and Single Hose Assy. (40in.)

Item# 99281
OUT OF STOCK. SOLD OUT: Expected In Stock 11/30/2024.
Retail: $36.99
$34.95

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

Item# 62752
Set of 3 stainless steel Propane (LP) "main" burner tubes. Each tube measures 19-1/2" long. Fits Genesis 300 series, model years  2011-2016 (with "Up Front" controls). Each tube features an igniter mounting bracket and air adjustment shutter with spider screen. Burner tube mounting screws included. Genuine Weber Part.
In Stock
Retail: $59.99
$52.80
View
Add
Item# 62753
Stainless steel Propane (LP) "Sear" burner tube for Weber Genesis 330 (model years 2011-2016). Measures 19-1/2" long. Features an air adjustment shutter, spider screen and igniter/electrode mounting bracket. Genuine Weber Part.
In Stock
$23.35
View
Add
Item# 62774
Hardware pack (set of 4 screws). 1/2" long stainless "machine thread" screws, feature a 8mm or 5/16"SAE slotted hex/washer head. Used on Weber Genesis 300 (2011-2016) burner tube forked ends and bottom grease tray rails.  
In Stock
$5.89
View
Add
Item# 62798
Stainless steel Natural Gas (NG) "Sear" burner tube for Weber Genesis 330 (model years 2011-2016). Measures 19-1/2" long. Features an air adjustment shutter, spider screen and igniter/electrode mounting bracket. Genuine Weber Part.
In Stock
Retail: $44.91
$29.55
View
Add
Item# 62799
Set of 3 stainless steel Natural Gas (NG) "Main" burner tubes. Each tube measures 19-1/2" long.   Fits Genesis 300 series, model years 2011-2016 (with "Up Front" controls). Each tube features an igniter mounting bracket and air adjustment shutter with spider screen. Burner tube mounting screws included. Genuine Weber Part.
In Stock
Retail: $56.99
$50.89
View
Add
Item# WTBG-2011SET
"Set of 3" stainless steel "main" burner tubes. Each tube measures 19-1/2" long. Fits Genesis 300 series, model years  2011-2016 (with "Up Front" controls). Each tube features an igniter mounting bracket and air adjustment shutter with spider screen.  Replaces OEM Parts 62752 and 62799.  NOTE: Mounting screws not included, see item #62774. This burner set works with either fuel type,  Natural Gas (NG) or Propane (LP).  Quality Aftermarket Part.
In Stock
$49.95
View
Add
Item# WTBG-SEAR
Stainless steel "sear burner" for Weber Genesis 330 (2011-2016). Measures 19-1/2" long and features an attached igniter mounting bracket and air adjustment shutter with spider screen. Replaces OEM parts 62753 and 62798. This burner works with either fuel type,  Natural Gas (NG) or Propane (LP).  Quality Aftermarket Part.
In Stock
$19.49
View
Add
Item# 62783
OEM Weber Part. Set of 5 porcelain coated steel flavorizer bars. Each bar measures 17-5/8" long (16-5/8" along the peak of the tent) and stands 2-1/8" tall.  Fits Genesis 300 series, model years 2011-2016.  Genuine Weber Part. (Replaces Part 7621). 
SOLD OUT: Expected In Stock 11/30/2024
Retail: $75.99
$65.99
View
Item# 62784
"Set of 5" stainless steel flavorizer bars. Each bar measures 17-5/8" long (16-5/8" along the peak of the tent) and stand 2-1/8" tall.  Fits Genesis 300 series, model years  2011-2016.  Genuine Weber Part. (Replaces Part 7620)
SOLD OUT: Expected In Stock 11/30/2024
Retail: $153.99
$143.99
View
Item# 93025
Set of 5 porcelain coated steel flavorizer bars. Each bar measures 17-5/8" long and stands 2-1/8" tall.  Fits Genesis 300 series, model years 2011-2016.  Quality Aftermarket Part (Replaces Parts 62783 and 7621). 
In Stock
$52.99
View
Add
Item# WEBHD
Set of 2, "stainless steel" heat deflectors, (installed below the burners). Fit Genesis 300 Series, 2011-2016 models (with upfront controls). Each deflector measures 13-1/4" front to back by 8-3/4" wide (width measurement made from edge to edge with deflector upside down).   Replaces Part 65505.
In Stock
Retail: $66.45
$43.40
View
Add
Item# WFB5-2011
Set of 5 stainless steel flavorizer bars (18 Gauge/430 Grade).  Each bar measures 17-1/2" long X 2-1/4" wide X 2-3/8" tall.  Fits Weber Genesis 300 Series, model years 2011-2016.  Replaces Weber OEM Part 7620.  Quality Aftermarket Part.  IMPORTANT: Remove clear protective plastic film from heat plates (if present) prior to use.
In Stock
Retail: $135.00
$95.75
View
Add
Item# 65054
Stainless steel warming rack for the Genesis 300 Series, model years "2007-2016". Rack surface is 5" X 23-1/2". Tip to tip across the bottom where the rack sets into the grill is 27". Genuine Weber Part.
SOLD OUT: Expected In Stock 11/30/2024
Retail: $43.99
$37.45
View
Item# 6788
Convert your Weber Genesis or Genesis II "300 Series" grill to a full-size griddle. Measures 25-3/4" (left to right) X 18-5/8" (front to back) X 1-1/4" (deep). Installs easily by replacing the cooking grates with the griddle. Constructed of durable carbon steel that delivers heat evenly. Genuine Weber Part.
In Stock
Retail: $299.00
$249.00
View
Add
Item# 7524
Set of 2, matte finish porcelain-enameled cast iron cooking grates. Fits Weber Genesis 300 Series (Model Years 2007-2016) and some DCS models. Each grate measures 12-3/4" wide X 19-1/2" front to back, for a total set width of 25-1/2". Genuine Weber Part.
In Stock
Retail: $145.99
$135.99
View
Add
Item# 82184
 Set of 2 stainless steel cooking grates. Made of solid 1/4" stainless steel rod. Fits Genesis 300 Series (Model Years 2007-2016) and many other brands/models. 50/50 Split with each grate measuring 12-7/8" wide X 19-1/2" front to back, for a total set width of 25-3/4".  (OEM Part - Replaces Weber Part 7528)
In Stock
Retail: $204.99
$184.99
View
Add
Item# 83030
Heavy duty single section stainless steel cooking grate. Made with solid 9mm (approx. 3/8") stainless steel rod. Measures 12-7/8" wide x 19-1/2" front to back. Fits Genesis 300 Series (Model Years 2007-2016) and many other brands/models. More than one required. Sold individually. Genuine Weber Part.
In Stock
$96.75
View
Add
Item# 40255403
"Sear burner control knob" for Genesis 330, "model years 2011-2016". Chrome finish knob features the red Weber logo on the top and a soft touch rubberized grey surface for turning. The knob measures 1-15/16" in diameter. Genuine Weber Part.
In Stock
Retail: $9.99
$7.99
View
Add
Item# 70360

Heavy duty Genuine Weber® Locking 2-7/8in. Grill Caster Wheel with Leg Insert. Smoothly wheel your Weber gas grill into position with the aid of a gas grill replacement caster wheel for your Weber Grills' Genesis 300, Summit Series and Spirit model.

Don't get caught flat-footed! Replace your Weber Locking Grill Caster Wheel when grill portability is necessary. Replace any defunct casters with one of these genuine Weber caster wheels. Once in place, prevent wayward movement with the built-in locking mechanism for supreme steadiness.

IMPORTANT: Please verify dimensions.

  • Dia. of the wheel measures 2-7/8in.
  • Stem length measures 1-3/8in.

Fits the following Weber Grills:

  • Spirit series (2009-2012)
  • Genesis series (2007-2011)
  • Summit series (2007-2011)
  • Replaces older Weber Part# 79500

What’s Included:

  • (1) 2-7/8in. Locking Caster Wheel with Leg Insert for Weber® grills.
  • One included, multiples may be necessary.
  • Genuine Weber OEM part
In Stock
$28.45
View
Add
Item# 88848
Set of three "main burner control knobs" for Genesis 300 Series, "model years 2011-2016".  Chrome finish knobs feature the red Weber logo on the top and a soft touch rubberized grey surface for turning. The knobs measure 3" in diameter. Genuine Weber Part.
In Stock
Retail: $43.99
$26.35
View
Add
Item# 100700-168

14ft. length propane adapter hose with stainless steel overbraid.  Long reach is ideal for extending your gas line for Camping and RVs. Allows for a full-size propane tank to be used with your portable grill or appliance. The extra long 14ft. length offers great versatility and safety for locating your camping firepit, etc.

Features an easy-screw-on large green knob that connects to the full-size propane tank. The small brass fitting end attaches to your propane appliance (in the same manner as a small propane camping bottle would). Hose is wrapped in stainless steel overbraid for added protection and durability as well as a strong deterrent for rodents.

What’s Included:

  • (1) 14ft. Propane Adapter Hose with Stainless Steel Overbraid, with attached QCC1 Propane Gas fitting from full size tank to hose, and from hose to US standard threaded 1 pound disposable tank type appliance fitting.
In Stock
$76.99
View
Add
Item# 103291-120

Genuine Weber® Grills Quality Part. 10 foot length of 1/2in. ID flexible Stripwound gas hose and Quick Connect kit with 1/2in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 10ft. of 1/2in. ID flexible Stripwound gas hose with 1/2in. fittings.
  • Quick Connect Fittings: Includes a 1/2in. Quick Connect fitting (that screws onto a 1/2in. NPT male pipe thread) and a 1/2in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

Fitment:

  • Weber: Important: This hose assembly fits Weber Models with 1/2in. fittings only. DOES NOT FIT grills with 3/8in. fittings (see Item# 82185 for proper part). Please confirm your size before ordering. Fits Most Weber Models, including but not limited to; Genesis models with 1/2in. fittings, Summit 400 and 600, Summit Gold A and Platinum.
  • Fits Many Other Brands: Alfresco, Broilmaster, Broilmaster 3x and 4x, Twin Eagles, Viking, Wolf and others that are equipped with 1/2in. SAE fittings.
In Stock
$69.99
View
Add
Item# 104007

3/8in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Female threaded (3/8in. FNPT) end fits onto 3/8in. fixed supply line.

What’s Included:

  • 1 On/Off Ball Valve Quick Connect Fitting
  • Includes Female threaded (3/8" FNPT) end fits onto 3/8" fixed supply line, Quick Connect coupler at other end.
In Stock
$32.99
View
Add
Item# 104023

1/2in. Quick Connect fitting with integrated On/Off ball valve. Features “Couple Safe Technology Thermal Shut-off Device Protection”. Designed to only allow gas line connection when the valve is in the closed position. Dust plug included.

Sizing:

  • 3/4in. ID end opening (1/2in. FNPT). Used with 1/2in. ID gas hose. ANSI certified for natural (NG) and propane (LP) gas use.

What’s Included:

  • 1 On/Off Ball Valve Quick Connect Fitting, 3/4in. ID end opening (1/2in. FNPT) and Quick Connect Coupler
In Stock
$49.99
View
Add
Item# 104088

1/2in. Quick Connect Fitting for use with 1/2in. ID gas hose. 3/4in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other medium BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick Connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 1/2" Gas Line Quick Connect Fitting
In Stock
Retail: $32.00
$27.79
View
Add
Item# 104406

3/8in. Quick Connect Fitting for use with 3/8in. gas hose. 3/8in. FNPT (Female National Pipe Thread) end, and Quick Connect Coupler on the other. Commonly used for Quick Connecting BBQ Grills (and other low pressure BTU output outdoor gas appliances) to a permanent gas supply line. ANSI certified for natural (NG) and propane (LP) gas use. Dust plug included.

Quick connect components make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 3/8" Gas Line Quick Connect Fitting
In Stock
$23.34
View
Add
Item# 106238-30

High performance 2-Stage gas grill regulator and 30in. of high-pressure heavy duty hose with 3/8in. fitting assembly. This low-pressure BBQ Grill Regulator is used for connecting commercial grade BBQ & Catering Grills requiring gas input in excess of 100,000 BTUs per hour through a green Type 1 fitting to propane tank. These 2-stage regulators also work well with larger tank-fed outdoor firepits that often trigger bypass mode on portable tanks.

Features two regulators that allow the Type 1 tank connection to disperse a higher volume of gas to pass through the tank connection before going into bypass mode (which kills the available gas pressure). Used for LP (Propane) gas only.

What’s Included:

  • 2-Stage Regulator and 30in. Hose Assembly which includes:
  • 3/8in. ID high pressure hose, 30in. length.
  • 3/8in. flare fitting hex nut for the appliance end connection, and a POL green hand nut for the propane tank connection.
  • One 3/8in. to 3/4in. brass adapter included.  
In Stock
$49.99
View
Add
Item# 3090

Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Product Details:

  • This timer accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer: 1hr, 2hr, or 3hr duration. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3090-01

Replacement Timer Control Knob for 1hr. to 3hr. Automatic Gas Timer (Item# 3090). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 1-2-3 hour incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 1hr, 2hr, 3hr increments.
In Stock
Retail: $20.00
$18.00
View
Add
Item# 3092

Set this automatic Gas Timer to your desired grilling/gas flow time in available 20min. increments, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you're connected to natural gas!

Details:

  • Accommodates 1/2in. NPT piping (both ends).
  • 100,000 BTU rating.
  • Natural Gas or Propane.
  • Quality FireMagic Part.

What’s Included:

  • Automatic Gas Timer Assembly, 20/40/60min. durations. 
  • Installation/operating instructions.
In Stock
Retail: $102.00
$91.80
View
Add
Item# 3092-01

Replacement Timer Control Knob for 20/40/60 minute Automatic Gas Timer (Item# 3092). Black plastic control knob features a sure grip edge surface and white lettered graphics indicating "Off" and 20, 40 and 60 minute incremental settings. Quality FireMagic Part.

What’s Included:

  • 1 Control Knob for Automatic Gas Timer Valve in 20/40/60 minute increments.
In Stock
Retail: $26.00
$23.40
View
Add
Item# 5520-11T

Outdoor gas appliance/bbq grill 20/40/60 minute Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from 20 minutes to 1 hour. Works with either natural gas (NG) or propane (LP).

  • 20/40/60 minute interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box: Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.

  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 20/40/60 minute durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $247.00
$222.30
View
Add
Item# 5520-13T

Outdoor gas appliance/bbq grill 1 to 3 hour Automatic Gas Timer with included stainless steel mounting panel/box assembly.

Has your grill ever been accidentally left “On”? Set this automatic Gas Timer to your desired grilling time, and be worry free. Never fret about leaving your grill on for wasteful hours until your tank runs dry, or even days if you’re connected to natural gas! A must have for your home, rental homes, AirB&B, or commercial applications.

Automatic Timer: Set this automatic Gas Timer to your desired grilling/gas flow time from one to three hours, and it will safely shut off gas to your grill automatically. Preset intervals from one, up to three hours. Works with either natural gas (NG) or propane (LP).

  • 1-2-3 hour interval gas valve timer.
  • 100,000 BTU rating.
  • Natural Gas or Propane.

Mounting Panel Box:

  • Premium Stainless Steel enclosure/recessed mounting box with Push to Open/Close magnetic door.
  • Outer Dimension with Mounting Overhang: 7-3/4in. x 7-3/4in.
  • Rough-in Size for Recess: 6-1/2in. x 6-1/2in. square opening.
  • Preassembled Gas Timer and Mounting Box with internal plumbing, ready to mount.
  • Two internally mounted 1/2in. flare connector adapters with “out/in” labels.

What’s Included:

  • Automatic Gas Timer and Mounting Box Assembly: 1hr, 2hr, or 3hr durations. 
  • Installation and operating instructions.
  • Quality FireMagic Part.
In Stock
Retail: $239.00
$215.10
View
Add
Item# 62762
Complete propane (LP) manifold assembly for Weber Genesis E-330, model years 2011-2016. Manifold measures 22-3/4" long (including mounting tabs). Assembly includes all 3 main burner valves with orifices, sear burner valve with orifice and male threaded fittings for the gas supply line and the side burner feed line. Mounting hardware (two screws) and installation instructions included. Genuine Weber Part. IMPORTANT: If this manifold assembly is used to convert fuel type, from Natural Gas (NG) to Propane (LP), all Weber warranties on your grill will be voided.
In Stock
Retail: $121.54
$113.59
View
Add
Item# 62791
Complete propane (LP) manifold assembly for Weber Genesis E-310, model years 2011-2016. Manifold measures 22-3/4" long (including mounting tabs). Assembly includes all 3 main burner valves with orifices, a male threaded fitting for the gas supply line, mounting hardware (two screws) and installation instructions. Genuine Weber Part. IMPORTANT: If this manifold assembly is used to convert fuel type, from Natural Gas (NG) to Propane (LP), all Weber warranties on your grill will be voided.
In Stock
Retail: $108.79
$99.10
View
Add
Item# 62792
Complete propane (LP) manifold assembly for Weber Genesis E-320, model years 2011-2016. Manifold measures 22-3/4" long (including mounting tabs). Assembly includes all 3 main burner valves with orifices, and male threaded fittings for the gas supply line and the side burner feed line. Mounting hardware (two screws) and installation instructions included. Genuine Weber Part. IMPORTANT: If this manifold assembly is used to convert fuel type, from Natural Gas (NG) to propane (LP), all Weber warranties on your grill will be voided.
In Stock
Retail: $110.90
$100.80
View
Add
Item# 65909

5/16in. ID propane/LP gas hose in 30 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 30in. hose 3/8in. fitting, with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet
In Stock
Retail: $39.89
$31.25
View
Add
Item# 70055
Complete natural gas (NG) manifold assembly for Weber Genesis E-310, model years 2011-2016. Manifold measures 22-3/4" long (including mounting tabs). Assembly includes all 3 main burner valves with orifices, a male threaded fitting for the gas supply line, mounting hardware (two screws) and installation instructions. Genuine Weber Part. IMPORTANT: If this manifold assembly is used to convert fuel type, from Propane (LP) to Natural Gas (NG), all Weber warranties on your grill will be voided.
In Stock
Retail: $108.11
$98.70
View
Add
Item# 70056
Complete natural gas (NG) manifold assembly for Weber Genesis E-320, model years 2011-2016. Manifold measures 22-3/4" long (including mounting tabs). Assembly includes all 3 main burner valves with orifices, and male threaded fittings for the gas supply line and the side burner feed line. Mounting hardware (two screws) and installation instructions included. Genuine Weber Part. IMPORTANT: If this manifold assembly is used to convert fuel type, from Propane (LP) to Natural Gas (NG), all Weber warranties on your grill will be voided.
In Stock
Retail: $110.23
$100.15
View
Add
Item# 70057
Complete natural gas (NG) manifold assembly for Weber Genesis E-330, model years 2011-2016. Manifold measures 22-3/4" long (including mounting tabs). Assembly includes all 3 main burner valves with orifices, sear burner valve with orifice and male threaded fittings for the gas supply line and the side burner feed line.  Mounting hardware (two screws) and installation instructions included. Genuine Weber Part. IMPORTANT: If this manifold assembly is used to convert fuel type, from Propane (LP) to Natural Gas (NG), all Weber warranties on your grill will be voided.
In Stock
Retail: $120.86
$111.34
View
Add
Item# 82185

Genuine Weber® Grills Quality Part. 10ft. length of 1/2in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. NOTE: This large 1/2in. ID Gas hose is unique, utilizing 3/8in. connection fittings. For a similar product with 1/2in. fittings, please see Item# 103291-120. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 10ft. of 1/2in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.

Fitment:
Fits Weber Genesis 330 models 2013-2016 and other models that utilize 3/8in. connection fittings, along with an oversize 1/2in. internal diameter hose. Please measure fitting size and assure prior to ordering.

In Stock
Retail: $98.20
$84.99
View
Add
Item# 99281

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. Genuine Weber Part. 

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this Genuine Weber part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Genuine Weber Part. 
SOLD OUT: Expected In Stock 11/30/2024
Retail: $36.99
$34.95
View
Item# GENVLV-LP
Propane (LP) "main burner" control valve for Genesis 300 Series, Model Years "2011-2016", (with "Up Front" controls). 1.02 orifice opening size.
In Stock
$29.39
View
Add
Item# GENVLV-LP-SEAR
Propane (LP) "SEAR BURNER" control valve for Genesis 300 Series, Model Years "2011-2016", (with "Up Front" controls). IMPORTANT: This is the "sear" burner valve only, for the "main" burner valve see part, GENVLV-LP.
In Stock
$24.69
View
Add
Item# GENVLV-NG
Natural Gas (NG) "main burner" control valve for Genesis 300 Series, Model Years "2011-2016" (with "Up Front" controls).  1.50 orifice opening size.
In Stock
$29.39
View
Add
Item# GENVLV-NG-SEAR
Natural Gas (NG) "SEAR BURNER" control valve for Genesis 300 Series, Model Years "2011-2016", (with "Up Front" controls). IMPORTANT: This is the "sear" burner valve only, for the "main" burner valve see part, GENVLV-NG.
In Stock
$24.69
View
Add
Item# HR7B

5/16in. ID propane/LP gas hose in 40 inch length with a brass 3/8in. female hex nut flare connector, assembled to propane regulator that features a QCC1 connection with large hand nut that attaches to the propane tank. A high quality substitute at a lower price point than Weber #99281.

Is your gas line cracked, split, or damaged? Is your regulator faulty and not supplying enough fuel to your burners? Replace and/or faulty regulator with this quality aftermarket part. Check your gas line for cracks, rodent tooth marks and potential leaks around fittings. The diaphragm inside the regulator can become damaged or weakened. Over time, regulators experience wear from exposure to heat, weather, and general use. Order your replacement hose and regulator assembly today!

What’s Included:

  • (1) 5/16in. x 40in. hose with attached regulator assembly with integrated QCC1 to-tank connection.
  • Instruction sheet.
  • Quality aftermarket part.
In Stock
Retail: $43.20
$28.86
View
Add
Item# NG10

10ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 10ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $82.99
$54.04
View
Add
Item# NG12

12ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 12ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $86.99
$60.94
View
Add
Item# NG14

14ft. length of 3/8in. ID flexible Stripwound gas hose and Quick Connect kit with 3/8in. fittings. Certified for natural gas or propane connection to existing fixed gas supply line. Please measure fitting size and assure prior to ordering.

Quick connect kits make it easy to connect and disconnect the grill from a fixed gas supply line quickly and without tools. This convenience is especially beneficial if you need to move the grill or store it away when not in use.

What’s Included:

  • 14ft. of 3/8in. ID flexible Stripwound gas hose with 3/8in. fittings.
  • Quick Connect Fittings: Includes a 3/8in. Quick Connect fitting (that screws onto a 3/8in. NPT male pipe thread) and a 3/8in. SAE female hex nut (that connects to the BBQ grill manifold), and a compression fitting for fast release.
In Stock
Retail: $93.99
$65.84
View
Add
Item# PR-SU

Need to swap between a Natural Gas and Propane (or vice-versa) Gas Regulation? This Convertible gas regulator is for use with natural gas (NG) or propane (LP) fuel, and comes preset for natural gas regulation (4in. water column) and can be quickly and easily converted to propane (10in. water column) regulation. This versatility allows users to easily switch between different gas sources without needing to replace the regulator.

How easy is it to convert the regulator?
Simply remove the seal cap and invert/reverse the plunger (the plunger is threaded at each end, simply unscrew to remove, flip and screwed-in to install) then replace the seal cap.

Dimensions: Overall length measures 3in., square diaphragm casing measures 2-3/8in x 2-3/8in.

Features:

  • Convertable to/from Natural Gas to/from Propane Gas Regulator
  • 1/2in. NPT inlet and outlet openings and a fuel flow directional arrow.
  • Rated 1/2 PSIG.  
In Stock
$20.59
View
Add
Item# RGB

23in. length, Stainless Steel Hose Protector/rodent guard with spring coil construction. Fits over 3/8in. and 5/16in.  propane gas hose.

Easy install — simply slide the guard over the propane hose at the fitting end. Protects the hose from kinking, touching hot surfaces on the inside of your BBQ grill, and helps to prevent rodents from chewing on your propane gas hose. Made in USA.

Propane hose/regulator assembly "not included", and is shown for display purposes only.

In Stock
Retail: $11.35
$7.95
View
Add
Item# 40277202
"Screw-on" rubber push button/battery cap for Weber "AA" battery sized electronic ignition modules. Gray button features lightning bolt screenprint design. "Fits Genesis 300 series model years 2011 thru 2016". Includes a module mounting lock ring and one "AA" battery.
In Stock
$8.19
View
Add
Item# 62806
Igniter electrode set. This set includes 3 igniters, (each has molded spark box with wire), 4 wire clips and washers. The wires are color coded for easy installation. Fits Genesis 300 Series (310/320 only), model years 2011-2016 (with upfront controls). This set is the electrodes only, igniter module sold separately. Genuine Weber Part.
In Stock
Retail: $31.16
$26.37
View
Add
Item# 7628
Complete main burner igniter kit for Genesis 310/320  grills, model years" 2011-2016" (control knobs on front face of the grill). Includes 4 terminal "AA" electronic ignition module with push button switch/battery cap, 3 main burner electrode/collector boxes with color coded wires, wire clips with mounting washers and installation instructions. Genuine Weber Part.
In Stock
Retail: $62.99
$52.99
View
Add
Item# 7629
Complete main and sear burner igniter kit for Genesis 330 grills, model years "2011-2016" (control knobs on front face of the grill). Includes 4 output terminal "AA" electronic ignition module with push button switch/ battery cap, 1 sear burner electrode/collector box and 3 main burner electrode/collector boxes with color coded wires, wire clips with mounting washers and installation instructions. (NO SIDE BURNER COMPONENTS INCLUDED) Genuine Weber Part.
In Stock
Retail: $62.99
$52.99
View
Add
Item# 88826
Weber Genesis 300 Series (Model Years 2011-2016) "AA" spark ignition module with heat shield. Features 4 color coded male flat spade output terminals, for easy wire connections/installation. Battery not included.  Important:  This module requires a mounting lock ring and a push button battery cap which are "NOT" included.  See Part 40277202, sold separately.
In Stock
$16.39
View
Add
Item# 60393
Genesis/Summit series temperature indicator, "without" mounting tab.  Dial incremented from 0 - 700 degrees F. Measures 2-3/8" in diameter. Probe length is 1-7/8" (measured from back of the guage to end of probe; Probe diameter is 1/4".  Includes wing nut and lock washer. Fits many Summit Gold/Platinum/Silver (model years 2000 and newer) and all Genesis 300 Series models.  Genuine Weber Part.
SOLD OUT: Expected In Stock 11/30/2024
Retail: $28.94
$25.99
View
Item# 62774
Hardware pack (set of 4 screws). 1/2" long stainless "machine thread" screws, feature a 8mm or 5/16"SAE slotted hex/washer head. Used on Weber Genesis 300 (2011-2016) burner tube forked ends and bottom grease tray rails.  
In Stock
$5.89
View
Add
Item# 62779
Hardware pack for Weber Genesis control panel. Contains 4 screws (1/2" long shank, Phillips head, 10-24 thread). Genuine Weber Part.
In Stock
$7.25
View
Add
Item# 62786
Set of 2 aluminum, bottom tray, support rails for Weber Genesis 300 Series grills, "model years 2011-2016" (with "up front" controls). Each rail measures 14" long. Mounting hardware (4 screws) included. Genuine Weber Part.
In Stock
Retail: $33.48
$27.10
View
Add
Item# 6415

Genuine Weber® Grills easy to clean, disposable aluminum foil disposable grease drip pan liners. Perfect-fit 8-1/2in. x 6in. Liners, 10 per package.

A simple disposable drip pan liner will save you from greasy maintenance. Line the drip tray of your grill and make the disposal of grease easy and clean!

Fitment:

  • Compatible with Weber Q, Pulse, Lumin, Weber Traveler, Spirit, Spirit II, 2022 Genesis 300/400, Genesis II 200/300, Genesis.

What’s Included:

  • (10) Weber Aluminum Foil Grease Tray Liners (8-1/2in. x 6in.)
In Stock
Retail: $13.49
$10.49
View
Add
Item# 65579

Genuine Weber Rotisserie Motor for Weber Gas Grills with a rotisserie including Weber Summit series rotisseries. Rotisserie motor is 120V, and spins at 2.5-3.0 RPM, and has a 20lb. load weight limit.

Genuine Weber Replacement Rotisserie Motor for Weber Gas Grills features a black plastic casing with a stainless steel backing plate, a weather resistant On/Off switch, 34in. long cord/plug and installation instructions.

Looking for a Complete Rotisserie Kit for your grill? Try our Universal Grill Deluxe Electric Rotisserie Kit 

What’s Included:

  • (1) Genuine Weber Replacement Rotisserie Motor for Weber Gas Grills:
  • 120V electric motor, 2.5-3.0 RPM, 20lb weight limit
  • Black plastic casing with a stainless steel backing plate
  • Weather resistant On/Off switch
  • 34in. cord with plug
  • Installation instructions.
  • Genuine Weber Part.

Does Not Fit: 

  • Does not fit/replace Weber Charcoal Kettle rotisseries.
  • Does not replace Ducane grill brand rotisserie motors.
     
In Stock
Retail: $57.99
$54.85
View
Add
Item# 67088
Genesis, Genesis II and Summit series temperature indicator.  Dial face incremented from 0 - 700 degrees F. Measures 2-3/8" in diameter. Probe length is 1-7/8" (measured from back of the guage to end of probe; Probe diameter is 1/4".  Includes mounting wing nut.  Fits 2007 to current Summit models, 2007 to 2016 Genesis 300 Series and 2017 to current Genesis II and Genesis II LX models.  Genuine Weber Part.
In Stock
$24.05
View
Add
Item# 67717
Bezel for lid thermometer/temp gauge. Fits all Weber Genesis 300 Series and many Summit Series models (years 2000 and newer). Specifically designed to hold Weber thermometers, parts 67088 (67731) and 60393 (sold separately). Diameter at the base of the bezel is 3-5/8". Genuine Weber Part.
In Stock
$12.05
View
Add
Item# 7652
Rotisserie kit for Weber Genesis 300 (2007-2016), Genesis II and Genesis II LX "200 and 300 Series" (2017 to current).  Fits firebox widths 20-3/8", 26-3/8" and 27-1/2". Kit includes heavy duty motor (supports up to 20 lbs.), motor mounting bracket, and stainless steel shaft, forks (Qty. 2), handle and hardware. Installation instructions included. Genuine Weber Part.
In Stock
Retail: $155.49
$145.49
View
Add
Item# 7661

The Weber Grill’n Go Handle Mount LED Flash Light with built-in motion sensor fits a large variety of Weber Gas Grills, and can be easily mounted, then removed for a portable flash light.

The Weber Grill’n Go BBQ LED light is a multifunctional grill light that easily attaches to the grill handle, and also detaches for extra light where you need it. Its motion sensor turns on when the lid is lifted and turns off once closed to save battery life, and added ease while grilling.

  • LED illuminates the entire cooking surface
  • On/off motion sensor saves battery life
  • Can be detached and used as a flashlight
  • Easily attaches to the grill handle

Fits "round handles" on the following Weber Grills:

  • Weber Spirit (2007 and newer)
  • Weber Genesis (2007 and newer)
  • Weber Summit (2007 and newer)
  • All Weber Spirit II
  • All Weber Genesis II

What's Included:

  • (1) Weber Grill’n Go BBQ LED Light kit
  • LED Light (which can be removed from the mounting collar and used as a flashlight)
  • Grill Handle Light Mounting Collar
  • Three "AAA" batteries and mounting/use instructions.
  • Genuine Weber Part.
In Stock
Retail: $45.49
$40.49
View
Add
Item# 7757
Weber Premium Grill Cover. Fits Genesis, Genesis II and Genesis II LX "300" Series and Genesis 300 Series 2022-Current. Measures 63" left to right X 25-1/2" front to back X 43-1/2" top to bottom. Protect your grill from the elements with this cover made from breathable, weather resistant material that is also UV resistant to prevent fading. Features fastening Velcro straps to secure the cover to your grill. Genuine Weber Part.
In Stock
Retail: $110.99
$100.99
View
Add
Item# 93305

Genuine Weber Aluminum Grease Catch Pan and One Single Disposable Foil Liner. Fits most Weber Genesis, Genesis II (2016+), Spirit, Summit Silver/Gold/Platinum and Summit 400/600 (prior to 2000) gas grills.

IMPORTANT: Please verify Catch Pan dimensions:
Pan measures 8-5/8in. x 6-1/8in. wide (width measurement includes the folded side rail extension).

Fits the following Weber Gas Grills:

  • Weber Genesis
  • Genesis II (2016+)
  • Spirit
  • Summit Silver/Gold/Platinum
  • Summit 400/600 (prior to 2000) 

What's Included:

  • (1) Weber Grills Aluminum Grease Catch Pan With Foil Liner, 8-5/8in. x 6-1/8in.
  • (1) Disposable Foil Liner
  • Foil liners available in a pack of 10, Part# 6415.
  • Genuine Weber Part
  • Please verify dimensions
In Stock
$16.49
View
Add
Item# WUZ4N

Porcelain coated steel bottom grease/drip tray for Weber Genesis 300 Series (with front of grill control panel) manufactured from 2011-2016. This hard to find replacement is for the discontinued Weber OEM part 62757. The bottom of the tray is sloped to one end, where the drain hole is located for the grease tray.

Our high quality aftermarket Grease Tray for the Weber Genesis 300 Series features porcelain enamel coating for an easy to clean, durable surface.

Looking for a Drip Pan for your Genesis 300? Try item# 93305

What’s Included:

  • (1) Main Grease Tray for Genesis 300 Series - 2011-2016 model years

Fits: Weber Genesis 300 Series, Genesis E310 E320 E330 S310 S320 S330 Models

Measures: 19-3/4in. x 14-1/4in. x 3-1/4in.

In Stock
$78.95
View
Add
Item# 7421

Genuine Weber® Cast Iron Griddle. Weighing in at 8lbs., this 12in. diameter heavy duty, cast iron griddle will definitely hold some heat, and clean up easily thanks to its porcelain enamel finish and non-stick properties. Logo embossed handles and aesthetic design makes for great food presentations. Genuine Weber® Gourmet BBQ System Accessory, but can be used on top of any grill grate.

Can be used as an insert: Part of the Weber Gourmet BBQ System. Use with hinged adaptable cooking grates such as: 7420, 8835, 7585, 7586, 7587, 64812 and 64815 (sold separately).

  • Heavy Duty Cast Iron
  • Retains heat and delivers professional searing
  • Porcelain enamel finish prevents sticking and allows for easy clean up
  • Great for searing-Seals in moisture and flavor
  • Perfect fit for Weber Gourmet BBQ System Hinged Cooking Grates

Other Gourmet BBQ System Accessories (Sold Separately):

Cast Iron Griddle: Part# 7421

Poultry Roaster: Part# 8838

Searing Grate: Part# 8834

BBQ Pizza Stone: Part# 8836

In Stock
Retail: $69.49
$59.49
View
Add
Item# 8834

Genuine WEBER 12in. Diameter Cast Iron Sear Grate. Cast-iron grate evenly conducts heat, creating professional sear marks while sealing in the moisture and flavor of your food. The porcelain-enameled
finish prevents sticking and allows for easy clean-up.

Become the grill master you've always strived to be by perfecting the art and science of a flawlessly seared meat with a Weber Cast Iron Sear Grate. Luckily for you, and your guests, becoming that backyard hero has never been easier with the Gourmet BBQ System Searing Grate. Your guests will be impressed at first glance, and through the very last bite.

What’s Included:

  • (1) Weber Cast Iron Sear Grate, part of the Weber Gourmet BBQ System:
  • Dimensions - 1/2in. x 12in. x 12in.
  • Seals in moisture and flavor
  • Porcelain enamel finish prevents sticking and allows for easy clean up
  • For use with The Gourmet BBQ System Hinged Cooking Grate
  • Fits Weber Gourmet BBQ System Hinged Grates 12in. Center Grate: (7420, 8835, 7585, 7586, 7587, 64812 and 64815 sold separately).

Other Gourmet BBQ System Accessories (Sold Separately):

Cast Iron Griddle: Part# 7421

Poultry Roaster: Part# 8838

Searing Grate: Part# 8834

BBQ Pizza Stone: Part# 8836

In Stock
Retail: $69.49
$59.49
View
Add
Item# 8836

Genuine Weber 13-3/8in. moisture absorbing cordierite BBQ grill pizza stone with an included chrome carry rack. Logo embossed handles and aesthetic design makes for great food presentations. For use on top of any grill grate.

The Pizza Stone is crafted with cordierite stone, which gets extremely hot in a hurry to create light and crispy, thin pizza crusts. Roll out your favorite dough, add the perfect toppings, and see what it’s like to bake brick-oven pizza in the comfort of your backyard. When you’re finished cooking, use the handy metal carry rack to quickly and easily transport your piping hot pizza and pizza stone from grill to table.

Can be used as an insert: Part of the Weber Gourmet BBQ System. Use with hinged adaptable cooking grates such as: 7420, 8835, 7585, 7586, 7587, 64812 and 64815 (sold separately).

  • Cordierite stone absorbs moisture for light and crispy thin crust pizza
  • Carry rack makes transporting the pizza quick and easy
  • Fits into the Gourmet BBQ System cooking grate so that it stays in place while grilling
  • Enjoy the taste of a crispy pizza with perfectly melted cheese and grilled toppings

Other Gourmet BBQ System Accessories (Sold Separately):

Cast Iron Griddle: Part# 7421

Poultry Roaster: Part# 8838

Searing Grate: Part# 8834

BBQ Pizza Stone: Part# 8836

In Stock
Retail: $69.49
$59.49
View
Add
Item# 8838

Weber® 2-in-1 Stainless Steel 13in. Poultry Roaster and Grilling Tray. Features a removable poultry insert in the middle that allows you to use your favorite liquids for roasting that holds 12oz. Genuine Weber® Gourmet BBQ System Accessory, and can be used on top of any grill grate.

Not your run-of-the-mill poultry roaster! The versatile, 2-in-1 design of the Poultry Roaster/Grilling tray empowers you to grill your bird and sides at the same time. Prepare a crispy yet moist chicken in the center, while vegetables simmer around the rim. Fill the center liquid container to make a succulent beer-can chicken, or remove it to use the entire pan for vegetables or sides.

What’s Included:

  • (1) Weber® 2-in-1 Stainless Steel 13in. Poultry Roaster/Grilling Tray:
  • Removable 12oz. liquid container
  • For use on ANY grill.
  • Fits Weber Gourmet BBQ System Hinged Grates 12in. Center Grate: (7420, 8835, 7585, 7586, 7587, 64812 and 64815 sold separately).

Other Gourmet BBQ System Accessories (Sold Separately):

Cast Iron Griddle: Part# 7421

Poultry Roaster: Part# 8838

Searing Grate: Part# 8834

BBQ Pizza Stone: Part# 8836

In Stock
Retail: $82.99
$72.99
View
Add