Burner Shields For Your Grill

Heat Shields by Size

grill parts: Heat Deflector - Stainless Steel - (Weber Spirit II 200, 300 Series)

Burner Shields grill parts: Heat Deflector - Stainless Steel - (Weber Spirit II 200, 300 Series) (image #1)

Burner Shields grill parts: Heat Deflector - Stainless Steel - (Weber Spirit II 200, 300 Series) (image #2)

Heat Deflector - Stainless Steel - (Weber Spirit II 200, 300 Series)

Item# 67060

IN STOCK

Retail: $17.32

$15.65

Genuine Weber® Stainless Steel Heat Deflector for Weber Spirit II 200 and 300 Series, model years 2017 and newer. Replace your rusty, corroded heat deflector with our Weber Part 67060 stainless steel heat deflector for Weber Spirit II grills. Features mounting foot tabs at each corner and it has 3 slotted vent openings on the slanted surface face.

What’s Included:

(1) Weber Stainless Steel Heat Deflector:
Fits Spirit II 200 and 300 Series, model years 2017 and newer.
Measures 7-3/4in. x 4-1/4in. x 2-1/8in. (at rear peak)
Genuine Weber Part.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

Qty:

Heat Shields by Size | Burner Shields

Parts for Burner Shields Grills: 5-1/2" Heat Tent, "PORTABLE" Patio Bistro Tru-Infrared

5-1/2" Heat Tent, "PORTABLE" Patio Bistro Tru-Infrared

Item# 29103024

Porcelain enameled round heat tent for Charbroil "PORTABLE" Patio Bistro Tru-Infrared models. Measures 5-1/2" in diameter. Features interior threaded post for mounting to burner.

In Stock

$9.99

Add

Parts for Burner Shields Grills: Big Easy Burner Tent

Big Easy Burner Tent

Item# 4500226

Burner tent for Char-broil "Big Easy" model grills. Stamped steel vented tent measures 6" X 6". Sold individually, more than one required.

In Stock

$9.69

Add

Parts for Burner Shields Grills: Charbroil Big Easy Stainless Heat Tent With Support

Charbroil Big Easy Stainless Heat Tent With Support

Item# 92261

Charbroil "Big Easy" stainless steel heat tent with support leg frame. The leg frame measures 8-1/2" X 5-1/2" and it supports the heat tent over the burner. The heat tent measures 6" X 6". This part includes one support and one...

In Stock

Retail: $38.72

$19.06

Add

Parts for Burner Shields Grills: Heat Deflector - Stainless Steel - (Weber Spirit II 200, 300 Series)

Heat Deflector - Stainless Steel - (Weber Spirit II 200, 300 Series)

Item# 67060

Genuine Weber® Stainless Steel Heat Deflector for Weber Spirit II 200 and 300 Series, model years 2017 and newer. Replace your rusty, corroded heat deflector with our Weber Part 67060 stainless steel heat deflector for Weber Spirit II grills....

In Stock

Retail: $17.32

$15.65

Add

Parts for Burner Shields Grills: 8-7/8" Heat Tent, Patio Bistro Tru-Infrared

8-7/8" Heat Tent, Patio Bistro Tru-Infrared

Item# 29102227

Porcelain enameled round heat tent for Charbroil Patio Bistro Tru-Infrared models. Measures 8-7/8" in diameter. Features tri-pod style, three mounting leg supports. Charbroil OEM Part.

SOLD OUT: Expected 3/28/2025

$11.99

Parts for Burner Shields Grills: 9" X 4-1/4" Heat Shield, Holland (Replaces OEM Part HGP111060)

9" X 4-1/4" Heat Shield, Holland (Replaces OEM Part HGP111060)

Item# HOLLSHLD

Stainless steel heat shield. Measures 9" long X 4-1/4" wide. Fits many Holland grill models. Features two 1" diameter vent holes and two mounting screw holes. Quality Aftermarket Part, Made in USA. Replaces Holland...

In Stock

Retail: $42.30

$25.15

Add

Parts for Burner Shields Grills: 11-7/8" X 4-1/8" Stainless Steel Heat Plate

11-7/8" X 4-1/8" Stainless Steel Heat Plate

Item# KENHP6

Stainless steel tent shaped heat plate. Measures 11-7/8" long X 4-1/8" wide". Features vent holes at each end. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$15.47

Add

Parts for Burner Shields Grills: 11-7/8" X 8-7/16" Burner Heat Distribution Shield

11-7/8" X 8-7/16" Burner Heat Distribution Shield

Item# SCHP6

Members Mark, stainless steel burner heat distribution shield. Dimensions are 8-7/16" wide X 11-7/8" long. Features mounting tab legs on each corner. More than one required. Sold individually. IMPORTANT: Remove protective plastic film (if...

In Stock

Retail: $29.50

$16.99

Add

Parts for Burner Shields Grills: Burner Shield - Stainless Steel - (12-3/8in. x 3-1/4in. Tapered)

Burner Shield - Stainless Steel - (12-3/8in. x 3-1/4in. Tapered)

Item# BBQHP2

BBQ Grillware Stainless Steel Heat Distribution Burner Shield. Fits BBQ Grillware models GSF-2616J, GSF-2616 and GFC-2616. Features a unique tapered and sloped end-to-end design for heat transfer efficiency. Designed to protect the burner, vaporize food...

In Stock

$17.86

Add

Parts for Burner Shields Grills: 12-1/2" x 20-1/2" Stainless Steel Flavor Screen For Body Style "4" Broilmaster Grills

12-1/2" x 20-1/2" Stainless Steel Flavor Screen For Body Style "4" Broilmaster Grills

Item# DPA104

12-1/2" x 20-1/2" Stainless steel Flavor Screen can be used to replace an existing Flavor Screen or to upgrade from ceramic briquettes to protect the burner and add flavor by catching and vaporizing food drippings. For use with P4, D4 AND H4...

In Stock

Retail: $119.00

$107.10

Add

Parts for Burner Shields Grills: Blaze® Air Baffle Flavor Bar - (13-1/8in. x 2-3/4in.)

Blaze® Air Baffle Flavor Bar - (13-1/8in. x 2-3/4in.)

Item# BLZ-32-083

Genuine Blaze® Stainless Steel Air Baffle Flavor Bar for Traditional and PRO Models that mounts underneath the main grill burners. Smaller sized air baffle measures 13-1/8in. x 2-3/4in. Blaze® Stainless Steel Air Baffle Flavor Bars are the secret...

In Stock

$9.32

Add

Parts for Burner Shields Grills: 13-1/8" X 10-3/4" Stainless Steel Heat Plate

13-1/8" X 10-3/4" Stainless Steel Heat Plate

Item# KENHP1

Stainless steel heat plate. Measures 13-1/8" X 10-3/4". Fits many Kenmore models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$39.97

Add

Parts for Burner Shields Grills: 13-3/16" X 8-3/4" FireMagic Stainless Steel Heat Plate/Flavor Grid

13-3/16" X 8-3/4" FireMagic Stainless Steel Heat Plate/Flavor Grid

Item# 90641

Firemagic stainless steel heat plate/flavor grid. Measures 13-3/16" front to back X 8-3/4" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution. More than one...

In Stock

Retail: $74.88

$36.51

Add

Parts for Burner Shields Grills: 13-3/16" X 10-1/2" FireMagic Stainless Steel Heat Plate/Flavor Grid

13-3/16" X 10-1/2" FireMagic Stainless Steel Heat Plate/Flavor Grid

Item# 90631

Firemagic stainless steel heat plate/flavor grid. Measures 13-3/16" front to back X 10-1/2" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat...

In Stock

$39.73

Add

Parts for Burner Shields Grills: FireMagic Flavor Grids, Set of 2, 13-1/4" X 11-7/8" (2) Aurora and Choice 430/830 Models

FireMagic Flavor Grids, Set of 2, 13-1/4" X 11-7/8" (2) Aurora and Choice 430/830 Models

Item# 3063-S-2

Set of 2 FireMagic flavor grids. Each grid measures 13-1/4" front to back X 11-7/8" wide. This set fits all FireMagic Aurora and Choice 430/830 models. Genuine FireMagic Part.

In Stock

Retail: $167.00

$150.30

Add

Parts for Burner Shields Grills: FireMagic Flavor Grids, Set of 3, 13-1/4" X 9-7/8" (2) And 13-1/4" X 8-1/2" (1), Aurora and Choice 540 Models

FireMagic Flavor Grids, Set of 3, 13-1/4" X 9-7/8" (2) And 13-1/4" X 8-1/2" (1), Aurora and Choice 540 Models

Item# 3064-S-3

Set of 3 FireMagic stainless steel vented flavor grids. Two measure 13-1/4" front to back X 9-7/8" wide and one measures 13-1/4" front to back X 8-1/2" wide. This set fits all FireMagic Aurora and Choice 540 models. Genuine...

In Stock

Retail: $242.00

$217.80

Add

Parts for Burner Shields Grills: Blaze® Air Baffle Flavor Bar - (13-3/8in. x 6-3/8in.)

Blaze® Air Baffle Flavor Bar - (13-3/8in. x 6-3/8in.)

Item# BLZ-32-084

Genuine Blaze® Stainless Steel Air Baffle Flavor Bar for Traditional Models that mounts underneath the main grill burners. Larger sized air baffle measures 13-3/8in. x 6-3/8in. Blaze® Stainless Steel Air Baffle Flavor Bars are the secret sauce to...

In Stock

$19.85

Add

Parts for Burner Shields Grills: 13-1/2" X 4" Burner Heat Distribution Shield

13-1/2" X 4" Burner Heat Distribution Shield

Item# SCHP1

Stainless steel burner shield. The hanging flanges at the ends of the shield are bent up and out at a 90 degree angle. The main flat part of the shield measures 13-1/2" X 4". Total length measurement including the extended flange ends is...

In Stock

$19.73

Add

Parts for Burner Shields Grills: 13-3/4" X 4" Stainless Divider, Broil King Signet And Sovereign (2006 And Newer)

13-3/4" X 4" Stainless Divider, Broil King Signet And Sovereign (2006 And Newer)

Item# 18529

13-3/4" X 4" stainless steel "divider". These heat partitions are used with the "Flav-R-Wave" system and enable better zone temperature control. Fits Broil King "Signet" and "Sovereign" models with...

In Stock

$12.99

Add

Parts for Burner Shields Grills: 13-3/4" X 4-1/8" Burner Heat Distribution Shield

13-3/4" X 4-1/8" Burner Heat Distribution Shield

Item# NGHP1

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 13-3/4" long X 4-1/8" wide (measured across the bottom). Features "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective plastic film (if present) from heat...

In Stock

$20.72

Add

Parts for Burner Shields Grills: 13-3/4" X 5-7/8" Flav-R-Wave, Broil King Signet And Sovereign (2006 And Newer)

13-3/4" X 5-7/8" Flav-R-Wave, Broil King Signet And Sovereign (2006 And Newer)

Item# 18429

Broil King 13-3/4" front to back X 5-7/8" wide stainless steel "Flav-R-Wave", heat distribution plate. Fits Broil King "Signet" and "Sovereign" models with "Tube-In-Tube" burners (model years 2006 and...

In Stock

$12.99

Add

Parts for Burner Shields Grills: 13-3/4" X 7-7/16" Stainless Steel Flavor Grid Heat Plate, Center Grid For FireMagic Regal 1 And Custom 1 (Replaces OEM Part 3054-S)

13-3/4" X 7-7/16" Stainless Steel Flavor Grid Heat Plate, Center Grid For FireMagic Regal 1 And Custom 1 (Replaces OEM Part 3054-S)

Item# FMHP1

Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 7-7/16" wide X 13-3/4" front to back. This heat plate/flavor grid is designed to stand directly on top of cast iron or cast...

In Stock

$60.01

Add

Parts for Burner Shields Grills: 13-3/4" X 10-11/16" Stainless Steel Flavor Grid Heat Plate, Regal 1 and Custom 1 (Replaces OEM Part 3052-S)

13-3/4" X 10-11/16" Stainless Steel Flavor Grid Heat Plate, Regal 1 and Custom 1 (Replaces OEM Part 3052-S)

Item# FMHP2

Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 10-11/16" wide X 13-3/4" front to back. This heat plate/flavor grid is designed to stand directly on top of cast iron or cast...

In Stock

$52.30

Add

Parts for Burner Shields Grills: 13-3/4" X 23-3/4" Stainless Steel Flavor Screen For Body Style "3" Broilmaster Grills

13-3/4" X 23-3/4" Stainless Steel Flavor Screen For Body Style "3" Broilmaster Grills

Item# DPA103

13-3/4" X 23-3/4" Stainless Steel Flavor Screen can be used to replace an existing Flavor Screen or to upgrade from ceramic briquettes to protect the burner and add flavor by catching and vaporizing food drippings. For use with P3, G3, D3 T3,...

In Stock

Retail: $129.00

$116.10

Add

Parts for Burner Shields Grills: Heat Distribution And Deflector Plate, Holland (Replaces OEM Part HGP181070)

Heat Distribution And Deflector Plate, Holland (Replaces OEM Part HGP181070)

Item# HOLLDEFL

Stainless steel heat distribution and deflector plate for main burner. Measures 14" long X 12" wide and features two 4-1/2" tall standing leg frames. Fits many Holland BBQ models. This plate distributes heat upwards evenly to the cooking...

In Stock

Retail: $175.00

$93.49

Add

Parts for Burner Shields Grills: 14-1/8" X 2" Heat Tent, Advantage Series 2, 4, And 6 Burner Models "2015 and Newer"

14-1/8" X 2" Heat Tent, Advantage Series 2, 4, And 6 Burner Models "2015 and Newer"

Item# G458-0018-W1

Stainless steel heat tent. Fits a veriety of Charbroil Advantage Series 2, 4, and 6 burner models (2015 and newer). Measures 14-1/8" long, across the bottom (excluding mounting tabs) and 2" wide, at the base. Features 2...

In Stock

$9.99

Add

Parts for Burner Shields Grills: 14-1/4" X 4" Burner Heat Distribution Shield

14-1/4" X 4" Burner Heat Distribution Shield

Item# BMHP6

Stainless steel "shallow" tent shaped burner shield. Measures 14-1/4" long X 4" wide (measured across the bottom). Features punched holes and cut-outs on both ends. Fits many Brinkmann models. IMPORTANT: Remove protective plastic film...

In Stock

$14.37

Add

Parts for Burner Shields Grills: 14-1/2" x 3-3/8" Burner Heat Distribution Shield

14-1/2" x 3-3/8" Burner Heat Distribution Shield

Item# GMNGHP1

Stainless steel burner shield. Used to protect the burner, vaporize food drippings and create an even surface temperature. Measures 14-1/2" total length measured at the bottom edge. Measures 3-3/8" wide (measured across the bottom). IMPORTANT:...

In Stock

$16.58

Add

Parts for Burner Shields Grills: 14-1/2" X 7-1/4" Burner Heat Distribution Shield

14-1/2" X 7-1/4" Burner Heat Distribution Shield

Item# VCHP1

Stainless steel heat distribution shield. Measures 14-1/2" front to back X 7-1/4" wide. Sold individually, more than one are used on the grill. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$26.77

Add

Parts for Burner Shields Grills: 14-5/8" X 4-1/4" Porcelain Coated Heat Tent

14-5/8" X 4-1/4" Porcelain Coated Heat Tent

Item# G430-0005-W1

Porcelain coated vented heat tent. Measures 14-5/8" long (including end tabs) X 4-1/4" measured across the bottom.

In Stock

$7.49

Add

Parts for Burner Shields Grills: 14-5/8" X 4-1/4" Stainless Steel Heat Distribution Shield

14-5/8" X 4-1/4" Stainless Steel Heat Distribution Shield

Item# NGHP3

14-5/8" X 4-1/4" stainless steel heat distribution shield. Features vent holes and mounting tabs at each end. Fits a variety of Nexgrill models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to...

In Stock

$19.97

Add

Parts for Burner Shields Grills: 14-5/8" X 4-1/2" Flame Tamer

14-5/8" X 4-1/2" Flame Tamer

Item# 80008074

Porcelain coated steel flame tamer. Dimensions are 14-5/8" X 4-1/2". Char-Broil original equipment part.

In Stock

$10.99

Add

Parts for Burner Shields Grills: 14-7/8" X 3-1/2" Stainless Steel Heat Plate, Master Forge

14-7/8" X 3-1/2" Stainless Steel Heat Plate, Master Forge

Item# MFHP1

Stainless steel vented heat distribution plate. Measures 14-7/8" long X 3-1/2" wide. Fits a variety of Master Forge models. IMPORTANT: Please verify dimensions to assure fit. IMPORTANT: Remove protective plastic film (if present)...

In Stock

$17.97

Add

Parts for Burner Shields Grills: 14-7/8" X 4-1/4" Flame Tamer

14-7/8" X 4-1/4" Flame Tamer

Item# G432-0096-W1

Porcelain coated "Flame Tamer" or "Burner Shield". Measures 4-1/4" wide X 14-7/8" long. Features 16 vent holes in each end. (width measurement is from edge to edge with the shield upside down and length is extreme tip to tip...

In Stock

$9.99

Add

Parts for Burner Shields Grills: 14-3/4" X 23-3/8" Cast Aluminum Heat Shield-Drip Tray With Drain Pipe, Phoenix

14-3/4" X 23-3/8" Cast Aluminum Heat Shield-Drip Tray With Drain Pipe, Phoenix

Item# SDSSDT-A

Heavy duty cast aluminum heat shield/drip tray with drain pipe, for Phoenix grills. Measures 14-3/4" front to back X 23-3/8" left to right. Features angled down sides and a sloped center channel to direct grease flow to the drain pipe end opening....

In Stock

$148.17

Add

Parts for Burner Shields Grills: 14-15/16" x 3-3/4" Stainless Steel Heat Plate

14-15/16" x 3-3/4" Stainless Steel Heat Plate

Item# KENHP3

Stainless steel tent shaped heat plate. Measures 14-15/16" long X 3-3/4" wide. Features 3 vents on each side of the plate. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$17.62

Add

Parts for Burner Shields Grills: 15" X 4-1/4" Flame Tamer

15" X 4-1/4" Flame Tamer

Item# CBHP4

Stainless steel vented burner shield or "Flame Tamer". Measures 4-1/4" width X 15" front to back (measurement includes tabs). For easier measurement we measure the width from edge to edge with the shield upside down. IMPORTANT: Remove...

In Stock

$20.84

Add

Parts for Burner Shields Grills: 15" X 5" Burner Heat Distribution Shield

15" X 5" Burner Heat Distribution Shield

Item# BMHP10

Stainless steel tent shaped heat distribution plate. Measures 15" long X 5" wide (measured across the bottom) . Features 2 vents on each side and a centered cut out section on one end. IMPORTANT: Remove protective plastic film...

In Stock

$15.26

Add

Parts for Burner Shields Grills: 15-1/8" X 2" Heat Tent, Advantage Series And Performance "2015 and Newer"

15-1/8" X 2" Heat Tent, Advantage Series And Performance "2015 and Newer"

Item# G361-0003-W1

Stainless steel heat tent. Fits a veriety of Charbroil Advantage Series and Performance Series models (2015 and newer). Measures 15-1/8" long, across the bottom (excluding mounting tabs) and 2" wide, at the base. Features 2...

In Stock

$10.99

Add

Parts for Burner Shields Grills: 15-1/8" X 3-3/4" Burner Heat Distribution Shield

15-1/8" X 3-3/4" Burner Heat Distribution Shield

Item# BMHP11

Stainless steel tent shaped burner heat shield. Measures 15-1/8" long X 3-3/4" wide (measured across the bottom). Features punched holes and cut-outs on both ends. Fits many Brinkmann models. IMPORTANT: Remove protective plastic film (if...

In Stock

$14.28

Add

Parts for Burner Shields Grills: 15-1/8" X 4-1/8" Burner Heat Distribution Shield

15-1/8" X 4-1/8" Burner Heat Distribution Shield

Item# NGKHP1

Stainless steel heat distribution shield. Measures 15-1/8" long X 4-1/8" wide. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$16.99

Add

Parts for Burner Shields Grills: 15-1/4" X 1-7/8" Stainless Steel Heat Tent, Charbroil Tru-Infrared (2015 and Newer)

15-1/4" X 1-7/8" Stainless Steel Heat Tent, Charbroil Tru-Infrared (2015 and Newer)

Item# G466-0024-W1

Stainless Steel heat tent. Fits Charbroil Professional, Signature and Commercial Series Tru-Infrared models, 2015 and newer. Measures 15-1/4" long and 1-7/8" wide, at the base. Features heat vent holes at each end. Sold individually, more...

In Stock

$9.99

Add

Parts for Burner Shields Grills: 15-1/4" X 3-1/8" Burner Heat Distribution Shield

15-1/4" X 3-1/8" Burner Heat Distribution Shield

Item# BMHP5

Stainless steel tent shaped burner shield. Measures 15-1/4" long X 3-1/8" wide (measured across the bottom). Features single mounting hole at the peak of the tent, on each end. Fits many Brinkmann models. IMPORTANT: Remove protective plastic...

In Stock

$15.46

Add

Parts for Burner Shields Grills: Flavorizer Bar Set - 5pc. - Porcelain Coated Steel - 15-1/4in. - (Weber Spirit II 310)

Flavorizer Bar Set - 5pc. - Porcelain Coated Steel - 15-1/4in. - (Weber Spirit II 310)

Item# 67046

Genuine Weber® Flavorizer Bars made in Porcelain Coated Steel. Set of five Weber Flavorizer Bars that fit Weber Spirit II 310 Series model years 2017 and newer. Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your...

SOLD OUT: Expected 4/7/2025

Retail: $40.90

$37.05

Parts for Burner Shields Grills: Flavorizer Bar Set - 5pc. - Porcelain Coated Steel - (15-1/4in.)

Flavorizer Bar Set - 5pc. - Porcelain Coated Steel - (15-1/4in.)

Item# 7636

In Stock

Retail: $75.99

$65.99

Add

Parts for Burner Shields Grills: Flavorizer Bar Set - 5pc. - Stainless Steel - (15-1/4in.)

Flavorizer Bar Set - 5pc. - Stainless Steel - (15-1/4in.)

Item# WFBSP3-2013

Highest quality Flavorizer Bars made in 430 grade Stainless Steel that fit Spirit and Spirit II 300 Series grills manufactured from 2013 to present with front-mounted controls. Set of five Flavorizer Bars/Burner Shields that measure 15-1/4in. x...

In Stock

$104.98

Add

Parts for Burner Shields Grills: Flavorizer Bar Set - 3pc. - Porcelain Coated Steel - 15-1/4in.- (Weber Spirit II 210)

Flavorizer Bar Set - 3pc. - Porcelain Coated Steel - 15-1/4in.- (Weber Spirit II 210)

Item# 67045

Genuine Weber® Flavorizer Bars made in Porcelain Coated Steel. Set of three Weber Flavorizer Bars that fit Weber Spirit II 210 Series model years 2017 and newer. Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your...

In Stock

Retail: $32.42

$28.65

Add

Parts for Burner Shields Grills: Flavorizer Bar Set - 3pc. - Stainless Steel - (15-1/4in.)

Flavorizer Bar Set - 3pc. - Stainless Steel - (15-1/4in.)

Item# WFBSP2-2013

The highest quality Flavorizer Bars for Weber grills constructed of 430 grade Stainless Steel. Set of three Flavorizer Bars that fit Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present. Our Stainless Steel Flavorizer Bars for...

In Stock

$86.43

Add

Parts for Burner Shields Grills: 15-3/8" X 3-5/8" Louvered Burner Heat Distribution Shield

15-3/8" X 3-5/8" Louvered Burner Heat Distribution Shield

Item# BMHP8

Louvered heat tent measures 15-3/8" long X 3-5/8" wide (measured across the bottom). Features four louver vents on the top of the shield. Stainless steel. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$21.94

Add

Parts for Burner Shields Grills: 15-3/8" X 3-3/4" Burner Heat Distribution Shield

15-3/8" X 3-3/4" Burner Heat Distribution Shield

Item# CHMBHP3

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 15-3/8" long X 3-3/4" wide (measured across the bottom). IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$15.97

Add

Parts for Burner Shields Grills: 15-3/8" X 4-7/8" Burner Heat Distribution Shield

15-3/8" X 4-7/8" Burner Heat Distribution Shield

Item# NGSAMHP1

Sams Club and Nexgrill stainless steel heat distribution shield. Features V-notches and round vent holes at each end of the shield. The shield measures 15-3/8" X 4-7/8". (For ease of measurement we measure the width from the bottom...

In Stock

$18.97

Add

Parts for Burner Shields Grills: Ducane Affinity 3400 "Stainless Steel" Heat Plate Set (3)

Ducane Affinity 3400 "Stainless Steel" Heat Plate Set (3)

Item# AFHP1012

Full "set of three" stainless steel heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 3400 model grills. The two right sections are notched to...

In Stock

$58.90

Add

Parts for Burner Shields Grills: Ducane Affinity 3100/3200 "Stainless Steel" Heat Plate Set (3)

Ducane Affinity 3100/3200 "Stainless Steel" Heat Plate Set (3)

Item# AFHP1013

Full set of three "stainless steel" heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 3100/3200 model grills. IMPORTANT: Remove protective plastic...

In Stock

$58.90

Add

Parts for Burner Shields Grills: Ducane Affinity 4400 "Stainless Steel" Heat Plate Set (4)

Ducane Affinity 4400 "Stainless Steel" Heat Plate Set (4)

Item# AFHP1014

Full set of four "stainless steel" steel heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 4400 model grills. The two center sections are notched to...

In Stock

$74.85

Add

Parts for Burner Shields Grills: Ducane Affinity 4100/4200 "Stainless Steel" Heat Plate Set (4)

Ducane Affinity 4100/4200 "Stainless Steel" Heat Plate Set (4)

Item# AFHP1015

Full set of four "stainless steel" heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 4100/4200 model grills. IMPORTANT: Remove protective plastic...

In Stock

Retail: $132.20

$74.85

Add

Parts for Burner Shields Grills: 15-3/8" X 4" Burner Heat Distribution Shield

15-3/8" X 4" Burner Heat Distribution Shield

Item# SCHP4

Stainless steel burner shield. The hanging flanges at the ends of the shield are bent down and out at a 90 degree angle. The main flat part of the shield measures 15-3/8" X 4". Total length measurement including the extended flange ends is...

In Stock

Retail: $38.05

$21.02

Add

Parts for Burner Shields Grills: 15-1/2" X 8-5/16" Stainless Steel Heat Shield/Vaporizing Panel For AOG 30" Models (Replaces OEM Part 30-B-05)

15-1/2" X 8-5/16" Stainless Steel Heat Shield/Vaporizing Panel For AOG 30" Models (Replaces OEM Part 30-B-05)

Item# 90351

15-1/2" long X 8-5/16" wide heavy duty stainless steel vented heat shield/vaporizing panel. Fits American Outdoor Grill (AOG) 30" models. More than one required, sold individually. The AOG 30" model uses 3 panels. Replaces OEM Part 30-B-05.

In Stock

$47.00

Add

Parts for Burner Shields Grills: AOG Vaporizing Panel - Stainless Steel - (15-1/2in. x 10.5in.)

AOG Vaporizing Panel - Stainless Steel - (15-1/2in. x 10.5in.)

Item# AOGHP1

American Outdoor Grill (AOG) Stainless Steel Vaporizing Panel for AOG 24in. and 36in. American Outdoor Grill Models. Replaces AOG OEM parts 24-B-05 and 36-B-05. Made in USA. Includes: (1) AOG stainless steel vaporizing panel/burner shield. Repl....

In Stock

$50.71

Add

Parts for Burner Shields Grills: AOG Vaporizing Panel Set - 2pc. - Stainless Steel - (15-1/2in. x 21in.)

AOG Vaporizing Panel Set - 2pc. - Stainless Steel - (15-1/2in. x 21in.)

Item# 24-B-05-2

Genuine AOG American Outdoor Grill Two Piece Stainless Steel Vaporizing Panel Set For AOG 24in. American Outdoor Grill (AOG) Models. Set Includes: Two genuine AOG stainless steel vaporizing panels/burner shields. Measure 15-1/2in. x 10-1/2in....

In Stock

Retail: $225.00

$202.50

Add

Parts for Burner Shields Grills: AOG Vaporizing Panel Set - 3pc. - Stainless Steel- (15-1/2in. x 24-7/8in.)

AOG Vaporizing Panel Set - 3pc. - Stainless Steel- (15-1/2in. x 24-7/8in.)

Item# 30-B-05-3

Genuine AOG American Outdoor Grill Three Piece Stainless Steel Vaporizing Panel Set For 30in. American Outdoor Grill (AOG) Models. Three Vaporizing Panels for a Total of 15-1/2in. x 24-7/8in. coverage. Set Includes: (3) Three genuine AOG stainless...

In Stock

Retail: $302.00

$271.80

Add

Parts for Burner Shields Grills: 15-1/2" X 25-1/2" Stainless Steel Smoker Shutter For Broilmaster P3, D3 and T3 Grills

15-1/2" X 25-1/2" Stainless Steel Smoker Shutter For Broilmaster P3, D3 and T3 Grills

Item# DPA100

15-1/2" X 25-1/2" Stainless Steel Smoker Shutter has blinds mounted between the fire and the food. Leave open for high-temperature grilling and searing; close for slow roasting, smoking, and baking. The Smoker Shutter may be used with any P3,...

In Stock

Retail: $179.00

$161.10

Add

Parts for Burner Shields Grills: 15-5/8" X 2" Heat Tent, Advantage Series 4 Burner Models "2015 and Newer"

15-5/8" X 2" Heat Tent, Advantage Series 4 Burner Models "2015 and Newer"

Item# G465-0012-W1

Stainless steel heat tent. Fits a variety of Charbroil Advantage Series 4 burner models as well as other Charbroil Classic Duel Fuel models (2015 and newer). Measures 15-5/8" long, across the bottom edge (excluding mounting tabs) and 2" wide, at the...

In Stock

$10.99

Add

Parts for Burner Shields Grills: 15-5/8" X 4-1/8" Stainless Steel "Rounded Top" Heat Shield

15-5/8" X 4-1/8" Stainless Steel "Rounded Top" Heat Shield

Item# KENMFHP1

Stainless steel heat shield. Measures 15-5/8" long X 4-1/8" wide. Features unique rounded top. Fits many Kenmore and Master Forge models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$16.56

Add

Parts for Burner Shields Grills: 15-3/4" X 6" Flav-R-Wave, Broil King Baron (2013 And Newer)

15-3/4" X 6" Flav-R-Wave, Broil King Baron (2013 And Newer)

Item# 18431

Broil King 15-3/4" front to back X 6" wide stainless steel "Flav-R-Wave", heat distribution plate. Fits Broil King "Baron" models with "Tube-In-Tube" burners, model years 2013 and...

In Stock

$13.99

Add

Parts for Burner Shields Grills: 15-3/4" x 5-3/8" Stainless Steel Heat Plate (Replaces Master Forge OEM Part 503225-10)

15-3/4" x 5-3/8" Stainless Steel Heat Plate (Replaces Master Forge OEM Part 503225-10)

Item# MFHP2

Stainless steel vented heat distribution plate. Measures 15-3/4" long X 5-3/8" wide. Features a mounting tab on each corner and 4 slotted vents (2 on each side). Fits a variety of Master Forge models. Designed to be used with cast iron burner part...

In Stock

$23.30

Add

Parts for Burner Shields Grills: Summit Gold/Platinum A/A6 & B/B6 Stainless Steel #9897 Flavorizer Bar Set

Summit Gold/Platinum A/A6 & B/B6 Stainless Steel #9897 Flavorizer Bar Set

Item# 9897

Two section Summit Gold/Platinum flavorizer bar set. One section is made up of 7 bars and the other 6 bars, the set has a total of 13 bars. Fits Summit Gold/Platinum A/A6 and B/B6 series. The bars measure 15-7/8" front to back and the total width...

In Stock

$359.85

Add

Parts for Burner Shields Grills: 16" X 3-3/4" Flame Tamer

16" X 3-3/4" Flame Tamer

Item# G501-0008-W1

Burner shield or "Flame Tamer". Porcelain Coated. Measures 3-3/4" wide X 16" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.

In Stock

$9.99

Add

Parts for Burner Shields Grills: 16" X 3-3/4" Flame Tamer

16" X 3-3/4" Flame Tamer

Item# 80006357

Burner shield or "Flame Tamer". Porcelain coated. Measures 3-3/4" width X 16" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.

In Stock

$9.99

Add

Parts for Burner Shields Grills: 16" X 4" Burner Heat Distribution Shield

16" X 4" Burner Heat Distribution Shield

Item# PFHP2

Stainless steel, tent shaped burner shield. Measures 16" long X 4" wide (measured across the bottom). Features 4 slots and 4 vents on each side of the tent. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$18.32

Add

Parts for Burner Shields Grills: 16" X 5-3/4" Porcelain Coated Flame Tamer

16" X 5-3/4" Porcelain Coated Flame Tamer

Item# G518-0010-W1

Porcelain coated flame tamer. Measures 16" long X 5-3/4" wide. Features unique center segment tab extension. Fits a variety of Sears/Kenmore models. Replaces OEM Part 80018323.

In Stock

$5.99

Add

Parts for Burner Shields Grills: Blaze® Flame Tamer - Stainless Steel - (16in. x 6-3/4in.)

Blaze® Flame Tamer - Stainless Steel - (16in. x 6-3/4in.)

Item# BLZ-32-064

Genuine Blaze® Grills OEM Heavy Gauge Stainless Steel Flame Tamer Burner Shield Fits Blaze Grills 3, 4 and 5 Burner Models. Replaces Blaze OEM part BLZ-32-064. Measures 16in. x 6-3/4in. These specially vented Blaze Flame Tamer heat distribution plates...

In Stock

$54.99

Add

Parts for Burner Shields Grills: Burner Shield - Stainless Steel - (16-1/8in. x 3-5/8in. Tapered)

Burner Shield - Stainless Steel - (16-1/8in. x 3-5/8in. Tapered)

Item# BBQHP1

BBQ Grillware Stainless Steel Heat Distribution Burner Shield. Fits BBQ Grillware models GGPL-2100, GSC-2418 AND GSC-2418N. Features a unique tapered and sloped end-to-end design for heat transfer efficiency. Designed to protect the burner, vaporize food...

In Stock

$21.36

Add

Parts for Burner Shields Grills: 16-1/8" X 4-5/8" Burner Heat Distribution Shield

16-1/8" X 4-5/8" Burner Heat Distribution Shield

Item# SCHP3

Stainless steel burner shield. The shield measures 16-1/8" X 4-5/8". For ease of measurement we measure the width from the bottom side. Features slotted vent holes on each side of the plate. IMPORTANT: Remove protective plastic film (if...

In Stock

$24.38

Add

Parts for Burner Shields Grills: 16-1/8" Porcelain Coated Heat Plate

16-1/8" Porcelain Coated Heat Plate

Item# G524-0032-W1

16-1/8" porcelain coated heat plate. Features a centered tongue mounting extension on one end. Main plate area measures 6-3/4" X 14-5/8. Dimensions, including extension are, 6-3/4" X 16-1/8". Sold individually.

In Stock

$11.99

Add

Parts for Burner Shields Grills: 16-1/8" X 8-1/4" Burner Heat Distribution Shield

16-1/8" X 8-1/4" Burner Heat Distribution Shield

Item# SCHP2

Members Mark burner heat distribution shield. Laser cut stainless steel. Dimensions are 8-1/4" wide X 16-1/8" long. More than one required. Sold individually. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

SOLD OUT: Expected 4/4/2025

$22.75

Parts for Burner Shields Grills: 16-3/16" X 8-3/4" FireMagic Stainless Steel Heat Plate/Flavor Grid

16-3/16" X 8-3/4" FireMagic Stainless Steel Heat Plate/Flavor Grid

Item# 90571

Firemagic stainless steel heat plate/flavor grid. Measures 16-3/16" front to back X 8-3/4" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution....

In Stock

$40.00

Add

Parts for Burner Shields Grills: 16-3/16" X 10-1/2" FireMagic Stainless Steel Heat Plate/Flavor Grid

16-3/16" X 10-1/2" FireMagic Stainless Steel Heat Plate/Flavor Grid

Item# 90561

Firemagic stainless steel heat plate/flavor grid. Measures 16-3/16" front to back X 10-1/2" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution. Designed to set...

In Stock

$47.26

Add

Parts for Burner Shields Grills: FireMagic Flavor Grids, Set of 2, 16-1/4" X 11-7/8" (2), A530

FireMagic Flavor Grids, Set of 2, 16-1/4" X 11-7/8" (2), A530

Item# 3056-S-2

Set of 2 FireMagic flavor grids. Each grid measures 16-1/4" front to back X 11-7/8" wide. This set fits all FireMagic Aurora A530 models. Genuine FireMagic Part.

In Stock

Retail: $242.00

$217.80

Add

Parts for Burner Shields Grills: FireMagic Flavor Grids, Set of 3, 16-1/4" X 9-7/8" (2) And 16-1/4" X 8-1/2" (1), E660, A660, Regal 2 Magnum

FireMagic Flavor Grids, Set of 3, 16-1/4" X 9-7/8" (2) And 16-1/4" X 8-1/2" (1), E660, A660, Regal 2 Magnum

Item# 3057-S-3

Set of 3 FireMagic stainless steel vented flavor grids. Two measure 16-1/4" front to back X 9-7/8" wide and one measures 16-1/4" front to back X 8-1/2" wide. This set fits all FireMagic Echelon 660, Aurora 660 and Regal 2 Magnum models....

In Stock

Retail: $308.00

$277.20

Add

Parts for Burner Shields Grills: FireMagic Flavor Grids, Set of 3, 16-1/4" X 11-7/8" (2) And 16-1/4" X 10-1/2" (1), E790, A790, Monarch Magnum

FireMagic Flavor Grids, Set of 3, 16-1/4" X 11-7/8" (2) And 16-1/4" X 10-1/2" (1), E790, A790, Monarch Magnum

Item# 3056-S-3

Set of 3 FireMagic stainless steel vented flavor grids. Two measure 16-1/4" front to back X 11-7/8" wide and one measures 16-1/4" front to back X 10-1/2" wide. This set fits all FireMagic Echelon 790, Aurora 790 and Monarch Magnum models....

In Stock

Retail: $363.00

$326.70

Add

Parts for Burner Shields Grills: FireMagic Flavor Grids, Set of 4, 16-1/4" X 11-7/8" (2), 16-1/4" X 10-1/2" (2), E1060 And Elite Magnum

FireMagic Flavor Grids, Set of 4, 16-1/4" X 11-7/8" (2), 16-1/4" X 10-1/2" (2), E1060 And Elite Magnum

Item# 3056-S-4

Set of 4 FireMagic stainless steel vented flavor grids. Two measure 16-1/4" front to back X 11-7/8" wide and two measures 16-1/4" front to back X 10-1/2" wide. This set fits all FireMagic Echelon E1060 and Elite Magnum models. Genuine...

In Stock

Retail: $484.00

$435.60

Add

Parts for Burner Shields Grills: 16-3/8" X 3-3/4" Flame Tamer

16-3/8" X 3-3/4" Flame Tamer

Item# G527-0013-W1

Porcelain coated "Flame Tamer" or "Burner Shield". Features 32 vent holes in each end. Measures 3-3/4" wide X 16-3/8" long. ( width measurement is from edge to edge with the shield upside down and length is extreme tip to tip).

In Stock

$10.99

Add

Parts for Burner Shields Grills: 16-1/2" X 2" Stainless Steel Heat Tent, Performance Series 4,5 and 6 Burner Models (2017 and Newer)

16-1/2" X 2" Stainless Steel Heat Tent, Performance Series 4,5 and 6 Burner Models (2017 and Newer)

Item# G470-0004-W1

16-1/2" X 2" vented stainless steel heat tent. Fits a variety of Charbroil Performance/Advantage Series 4,5 and 6 burner models as well as other Charbroil models (2017 and newer). Measures 16-1/2" long, across the bottom edge (excluding...

In Stock

$10.99

Add

Parts for Burner Shields Grills: Burner Shield - Stainless Steel - (16-1/2in. x 4in.)

Burner Shield - Stainless Steel - (16-1/2in. x 4in.)

Item# BBQHP3

Stainless Steel Heat Distribution Burner Shield features two elongated mounting slots on each end. Designed to protect the burner, vaporize food drippings and create an even cooking surface temperature. Fits a variety of gas grills that require a burner...

In Stock

$16.33

Add

Parts for Burner Shields Grills: 16-1/2" X 6-1/4" Burner Heat Distribution Shield

16-1/2" X 6-1/4" Burner Heat Distribution Shield

Item# COHP1

Stainless steel heat distribution shield. Features holes down each side. Measures 16-1/2" front to back X 6-1/4" wide. For easier measurement we measure the width from edge to edge with the shield upside down. IMPORTANT: Remove protective...

In Stock

$23.99

Add

Parts for Burner Shields Grills: 16-1/2" X 6-1/2" Briquet Holder With Ceramic Briquettes

16-1/2" X 6-1/2" Briquet Holder With Ceramic Briquettes

Item# 94751

16-1/2" X 6-1/2" stainless steel briquette holder with ceramic briquettes. Used on a variety of Barbeque Galore, Turbo and Captain Cook model grills.

In Stock

$53.02

Add

Parts for Burner Shields Grills: 16-1/2" X 10-5/8" DCS Stainless Steel Heat Shield (Replaces DCS OEM Part 213948)

16-1/2" X 10-5/8" DCS Stainless Steel Heat Shield (Replaces DCS OEM Part 213948)

Item# DCSHP2

16-1/2" X 10-5/8" DCS Stainless Steel Heat Shield. Quality Aftermarket Part. Replaces DCS OEM Part 213948. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. Burner is for display purposes only;...

In Stock

$59.00

Add

Parts for Burner Shields Grills: 16-3/4" X 4" Burner Heat Distribution Shield

16-3/4" X 4" Burner Heat Distribution Shield

Item# BMHP1

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 16-3/4" long X 4" wide (measured across the bottom). Features slotted punched holes and cut-outs on both ends. IMPORTANT: Remove protective plastic film (if present) from heat...

In Stock

$14.36

Add

Parts for Burner Shields Grills: 7-1/2" Wide ProFire Center Flavor Grid Heat Distribution Plate

7-1/2" Wide ProFire Center Flavor Grid Heat Distribution Plate

Item# PF36-29NS

ProFire heat distribution plate. Measures 7-1/2" wide X 16-3/4" front to back. Heavy gauge stainless steel. Sold by each. This is the center plate used on models designed with 3 heat distribution plates.

In Stock

$93.99

Add

Parts for Burner Shields Grills: 9-1/4" Wide ProFire Flavor Grid Heat Distribution Plate

9-1/4" Wide ProFire Flavor Grid Heat Distribution Plate

Item# PF27-29NS

ProFire heat distribution plate. Measures 9-1/4" wide X 16-3/4" front to back. Heavy gauge stainless steel. Sold by each. More than one required, (2 plus additional narrower center plate used on some larger models).

In Stock

$93.99

Add

Parts for Burner Shields Grills: 16-3/4" X 9-5/8" Stainless Steel Briquette Holder Tray (Replaces OEM Part 80006)

16-3/4" X 9-5/8" Stainless Steel Briquette Holder Tray (Replaces OEM Part 80006)

Item# LYNXHP1

Stainless steel briquette holder tray. Measures 16-3/4" front to back X 9-5/8" wide and holds 28, 2" X 2" briquettes, see parts BQLYX and 41628. Made of 304 grade stainless steel; .048" thick. Fits a variety of LYNX models. ...

In Stock

$86.00

Add

Parts for Burner Shields Grills: 16-13/16" X 3-5/16" Burner Heat Distribution Shield

16-13/16" X 3-5/16" Burner Heat Distribution Shield

Item# BMHP7

Stainless steel tent shaped burner shield. Measures 16-13/16" long X 3-5/16" wide (measured across the bottom). Features single mounting hole at the peak of the tent, on each end. Fits many Brinkmann models. IMPORTANT: Remove protective plastic...

In Stock

$15.83

Add

Parts for Burner Shields Grills: 16-7/8" X 4-1/2" Flame Tamer

16-7/8" X 4-1/2" Flame Tamer

Item# 80000947

Burner shield or "Flame Tamer". Stainless steel. Measures 4-1/2" width X 16-7/8" front to back with measurement including mounting tabs. For easier measurement we measure the width from edge to edge with the shield upside down.

In Stock

$22.65

Add

Parts for Burner Shields Grills: 16-7/8" X 6-1/4" Burner Heat Tent

16-7/8" X 6-1/4" Burner Heat Tent

Item# G208-0029-W1

Burner heat tent. Black porcelain coated steel. Measures 6-1/4" wide X 16-7/8" long.

In Stock

$13.49

Add

Parts for Burner Shields Grills: 17" X 2-1/8" Heat Tent, Signature Series (Conventional) Model Years 2015 And Newer

17" X 2-1/8" Heat Tent, Signature Series (Conventional) Model Years 2015 And Newer

Item# G422-0010-W1

Stainless steel vented heat tent. Fits Charbroil Signature Series "Conventional" (Not Tru-Infrared) 2, 3, and 4 burner models (2015 and newer). Measures 17" long, across the bottom edge X 2-1/8" wide at the base. Sold individually, more...

In Stock

$9.19

Add

Parts for Burner Shields Grills: 17" X 3-7/8" Flame Tamer Burner Shield

17" X 3-7/8" Flame Tamer Burner Shield

Item# 80003394

Black porcelain coated burner shield. Measures 17" long X 3-7/8" across the bottom.

In Stock

$6.49

Add

Parts for Burner Shields Grills: 17" X 3-7/8" Flame Tamer

17" X 3-7/8" Flame Tamer

Item# 80017023

Burner shield heat distribution plate. Porcelain coated steel. Dimensions are 17" long X 3-7/8" measured across the bottom edge to edge. The special features are the two slotted holes on the top edges of the shield.

In Stock

$6.49

Add

Parts for Burner Shields Grills: 17" X 4" Burner Heat Distribution Shield

17" X 4" Burner Heat Distribution Shield

Item# PFHP3

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17" long (measured "tip to tip" along the outside bottom edge) X 4" wide. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$15.67

Add

Parts for Burner Shields Grills: 17" X 5" Heat Plates (Set Of 5), Ducane Stainless And Meridian Series 5-Burner Models

17" X 5" Heat Plates (Set Of 5), Ducane Stainless And Meridian Series 5-Burner Models

Item# DUCHP2-SET

Set of 5 stainless steel heat distribution plates. Each plate measures 17" long X 5" wide. Fits Ducane "Stainless and Meridian Series", 5-Burner models. IMPORTANT: Remove protective plastic film (if present) from heat...

In Stock

Retail: $175.00

$91.24

Add

Parts for Burner Shields Grills: 17" X 6-1/2" Heat Plates (Set Of 3), Ducane Stainless And Meridian Series 3-Burner Models

17" X 6-1/2" Heat Plates (Set Of 3), Ducane Stainless And Meridian Series 3-Burner Models

Item# DUCHP1-SET

Set of 3 stainless steel heat distribution plates. Each plate measures 17" long X 6-1/2" wide. Fits Ducane "Stainless and Meridian Series", 3-Burner models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior...

In Stock

Retail: $120.00

$68.49

Add

Parts for Burner Shields Grills: Heat Shield, "Electric" Patio Bistro

Heat Shield, "Electric" Patio Bistro

Item# 29102162

Heat shield, fits many Charbroil "Electric" Patio Bistro models. Measures 17-1/2" in diameter X 4" deep. Features a center drain opening and 3 threaded mounting hole grommets. Genuine Charbroil Part.

In Stock

$15.39

Add

Parts for Burner Shields Grills: Inner Reflector, "Electric" Patio Bistro

Inner Reflector, "Electric" Patio Bistro

Item# 29102214

Round inner reflector. Fits many Charbroil "Electric" Patio Bistro models. Measures 17-1/2" in diameter and 5-3/4" deep. Features center drain hole opening, rim cut-out for element and 3 mounting tabs. Genuine Charbroil...

In Stock

$26.99

Add

Parts for Burner Shields Grills: 12" Wide ProFire Flavor Grid Heat Distribution Plate

12" Wide ProFire Flavor Grid Heat Distribution Plate

Item# PERF13710A-14

Stainless steel ProFire "Flavor Grid" heat distribution plate. Measures 17-1/8" front to back by 12" wide. More than one required sold individually.

In Stock

Retail: $148.75

$83.79

Add

Parts for Burner Shields Grills: 17-1/8" X 2-1/2" Set Of "11" Stainless Steel Flavorizer Bars, Genesis II 610 And "LX" 640 (2017 And Newer)

17-1/8" X 2-1/2" Set Of "11" Stainless Steel Flavorizer Bars, Genesis II 610 And "LX" 640 (2017 And Newer)

Item# 66796

Set of "11" stainless steel flavorizer bars for Weber Genesis II 610 and "LX" 640 models (2017 and newer). Each bar measures 17-1/8" long ,measured along the bottom edges and 16-1/8" long, measured along the top peak of the...

In Stock

$100.95

Add

Parts for Burner Shields Grills: Flavorizer Bars - 7pc - Stainless Steel - 17-1/8in X 2-1/2in. (Genesis II 410/LX 440 2017-21 Genesis 400 Series 2022-up)

Flavorizer Bars - 7pc - Stainless Steel - 17-1/8in X 2-1/2in. (Genesis II 410/LX 440 2017-21 Genesis 400 Series 2022-up)

Item# 66797

Set of "7" stainless steel flavorizer bars for Weber Genesis II 410/LX 440 models (2017-21) and Genesis 400 Series (2022 and Newer). Each bar measures 17-1/8" long, measured along the bottom edges and 16-1/8" long, measured along the top peak of the tent. The...

In Stock

$74.85

Add

Parts for Burner Shields Grills: 17-1/8" X 3" Set Of "3" Stainless Steel Flavorizer Bars, Genesis II 210 And "LX" 240 (2017 And Newer)

17-1/8" X 3" Set Of "3" Stainless Steel Flavorizer Bars, Genesis II 210 And "LX" 240 (2017 And Newer)

Item# 66794

Set of "3" stainless steel flavorizer bars for Weber Genesis II 210 and "LX" 240 models (2017 and newer). Each bar measures 17-1/8", measured along the bottom edges, and 16-1/8" measured along the top peak of the...

SOLD OUT: Expected 4/7/2025

$42.45

Parts for Burner Shields Grills: Flavorizer Bars - 5pc - Stainless Steel - 17-1/8in X 3in. (Genesis II 310/LX 340 2017-21 Genesis 300 Series 2022-up)

Flavorizer Bars - 5pc - Stainless Steel - 17-1/8in X 3in. (Genesis II 310/LX 340 2017-21 Genesis 300 Series 2022-up)

Item# 66795

Genuine Weber Stainless Steel Flavorizer Bars—a set of five, designed specifically for Genesis II 310 & LX 340 models (2017-21) and Genesis 300 Series (2022 & newer). These bad boys are built to evenly distribute heat, vaporize drippings for...

SOLD OUT: Expected 4/7/2025

$62.25

Parts for Burner Shields Grills: 17-1/4" X 3-7/8" Vaporizer Bar, Grill2Go Tru-Infrared "2012 and Newer"

17-1/4" X 3-7/8" Vaporizer Bar, Grill2Go Tru-Infrared "2012 and Newer"

Item# 29102789

Porcelain coated steel vaporizer bar. Fits Charbroil Grill2Go Tru-Infrared (model years 2012 and newer). Measures 17-1/4" long (including mounting tabs) X 3-7/8" wide. Features dual mounting tabs on each end. Charbroil OEM Part.

SOLD OUT: Expected 3/28/2025

$17.99

Parts for Burner Shields Grills: 17-1/4" X 5" Burner Heat Distribution Shield

17-1/4" X 5" Burner Heat Distribution Shield

Item# NGCHP3

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 5" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective...

In Stock

$23.73

Add

Parts for Burner Shields Grills: 17-1/4" X 5-7/8" Burner Heat Distribution Shield

17-1/4" X 5-7/8" Burner Heat Distribution Shield

Item# NGCHP4

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 5-7/8" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective...

In Stock

$23.75

Add

Parts for Burner Shields Grills: 17-1/4" X 6-13/16" Burner Heat Distribution Shield

17-1/4" X 6-13/16" Burner Heat Distribution Shield

Item# NGCHP1

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 6-13/16" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective...

In Stock

$20.70

Add

Parts for Burner Shields Grills: Briquette Tray - Stainless Steel - (17-3/16in. x 12-3/4in.)

Briquette Tray - Stainless Steel - (17-3/16in. x 12-3/4in.)

Item# ALFBT1

Premium Stainless Steel Briquette Tray, designed to hold 24 ceramic briquettes (sold separately). Crafted from high-quality 304 grade stainless steel for durability and longevity. This tray is a direct replacement for Alfresco OEM Part 510-0005, ensuring a...

In Stock

$75.89

Add

Parts for Burner Shields Grills: 17-5/16" X 8-1/4" Burner Heat Distribution Shield

17-5/16" X 8-1/4" Burner Heat Distribution Shield

Item# NGSHP3

Stainless steel heat distribution shield. Measures 17-5/16" front to back X 8-1/4" wide. Fits a variety of Nexgrill, JennAir, Vermont Casting and Costco/Kirkland models. IMPORTANT: Remove protective plastic film (if present) from heat plates...

In Stock

$29.51

Add

Parts for Burner Shields Grills: 17-5/16" X 9-7/8" Burner Heat Distribution Shield

17-5/16" X 9-7/8" Burner Heat Distribution Shield

Item# NGSHP2

Stainless steel heat distribution shield. Measures 17-5/16" front to back X 9-7/8" wide. Fits a variety of Nexgrill and Costco/Kirkland models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

Retail: $50.25

$29.49

Add

Parts for Burner Shields Grills: 17-3/8" x 4" Porcelain Coated Heat Plate

17-3/8" x 4" Porcelain Coated Heat Plate

Item# 94281

17-3/8" x 4" porcelain coated steel heat plate. Shallow tent design, stands 7/8" tall at the peak of the tent. Features 2 slotted mounting holes at one end and one at the other. Fits a variety of Brinkmann and many other Brands/Models.

In Stock

$13.34

Add

Parts for Burner Shields Grills: 17-1/2" X 6" Flav-R-Wave, Broil King Regal (2010- Newer) And Imperial (2009-Newer)

17-1/2" X 6" Flav-R-Wave, Broil King Regal (2010- Newer) And Imperial (2009-Newer)

Item# 18433

Broil King 17-1/2" front to back X 6" wide stainless steel "Flav-R-Wave", heat distribution plate. Fits Broil King "Regal" (2010-Newer) and "Imperial" (2009-Newer) models with...

In Stock

$14.99

Add

Parts for Burner Shields Grills: 17-9/16" X 3-3/16" Burner Heat Distribution Shield

17-9/16" X 3-3/16" Burner Heat Distribution Shield

Item# PFHP1

Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-9/16" long X 3-3/16" wide (measured across the bottom). Features slotted holes at one end, and a round cutout on the opposite end. IMPORTANT: Remove protective plastic film...

In Stock

$14.47

Add

Parts for Burner Shields Grills: 17-5/8" Porcelain Coated Flavorizer Bar Set, Genesis 300 Series "Model Years 2011-2016" (Replaces Part 7621)

17-5/8" Porcelain Coated Flavorizer Bar Set, Genesis 300 Series "Model Years 2011-2016" (Replaces Part 7621)

Item# 62783

OEM Weber Part. Set of 5 porcelain coated steel flavorizer bars. Each bar measures 17-5/8" long (16-5/8" along the peak of the tent) and stands 2-1/8" tall. Fits Genesis 300 series, model years 2011-2016. Genuine Weber Part....

In Stock

Retail: $75.99

$65.99

Add

Parts for Burner Shields Grills: 17-5/8" Stainless Steel Flavorizer Bar Set, Genesis 300 Series "Model Years 2011-2016" (Replaces Part 7620)

17-5/8" Stainless Steel Flavorizer Bar Set, Genesis 300 Series "Model Years 2011-2016" (Replaces Part 7620)

Item# 62784

"Set of 5" stainless steel flavorizer bars. Each bar measures 17-5/8" long (16-5/8" along the peak of the tent) and stand 2-1/8" tall. Fits Genesis 300 series, model years 2011-2016. Genuine Weber Part....

In Stock

Retail: $153.99

$143.99

Add

Parts for Burner Shields Grills: 17-5/8" Stainless Steel Flavor Bar Set Of 5, Genesis 300 Series 2011-2016 Replaces OEM Part 7620

17-5/8" Stainless Steel Flavor Bar Set Of 5, Genesis 300 Series 2011-2016 Replaces OEM Part 7620

Item# WFB5-2011

Set of 5 stainless steel flavorizer bars (18 Gauge/430 Grade). Each bar measures 17-1/2" long X 2-1/4" wide X 2-3/8" tall. Fits Weber Genesis 300 Series, model years 2011-2016. Replaces Weber OEM Part 7620. ...

In Stock

Retail: $105.00

$137.10

Add

Parts for Burner Shields Grills: 17-5/8" x 4-3/8" Stainless Steel Flame Tamer/Heat Distribution Plate (Replaces Bull OEM Part 16631)

17-5/8" x 4-3/8" Stainless Steel Flame Tamer/Heat Distribution Plate (Replaces Bull OEM Part 16631)

Item# BULLHP1

17-5/8" x 4-3/8 " stainless steel, vented flame tamer/heat distribution plate. Fits most Bull models, including Angus, Brahma, Lonestar and Premium. More than one required, sold individually. Quality Aftermarket Part. Constructed of 304...

In Stock

$36.75

Add

Parts for Burner Shields Grills: 17-3/4" X 6-3/8" Burner Heat Distribution Shield

17-3/4" X 6-3/8" Burner Heat Distribution Shield

Item# NGCHP2

Heavy guage 430 stainless steel heat distribution plate. Measures 17-3/4" long x 6-3/8" across the bottom. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. IMPORTANT: Remove protective plastic film (if...

In Stock

$24.40

Add

Parts for Burner Shields Grills: 17-3/4" X 7-7/16" Stainless Steel Flavor Grid Heat Plate (Replaces OEM Part 3055-S)

17-3/4" X 7-7/16" Stainless Steel Flavor Grid Heat Plate (Replaces OEM Part 3055-S)

Item# FMHP3

Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 7-7/16" wide X 17-3/4" front to back. This heat plate is designed to stand directly on top of cast iron or cast stainless burners. Features...

In Stock

$52.30

Add

Parts for Burner Shields Grills: 17-3/4" X 8" Burner Heat Distribution Shield

17-3/4" X 8" Burner Heat Distribution Shield

Item# NGJAHP1

Heavy guage 430 stainless steel burner heat distribution plate. Measures 17-3/4" long x 8" across the bottom. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$22.18

Add

Parts for Burner Shields Grills: 17-3/4" X 10-1/4" Burner Heat Distribution Shield (Replaces Brinkmann OEM Part 600-8750-1)

17-3/4" X 10-1/4" Burner Heat Distribution Shield (Replaces Brinkmann OEM Part 600-8750-1)

Item# BMHP9

17-3/4" X 10-1/4" stainless steel heat distribution plate. Features a shallow vented tent shape with one larger hole for manually igniting the burner, when necessary. This heat plate is designed to be used with Brinkmann "U"...

In Stock

$36.55

Add

Parts for Burner Shields Grills: 17-3/4" X 10-11/16" Stainless Steel Flavor Grid Heat Plate (Replaces OEM Part 3053-S)

17-3/4" X 10-11/16" Stainless Steel Flavor Grid Heat Plate (Replaces OEM Part 3053-S)

Item# FMHP4

Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 10-11/16" wide X 17-3/4" front to back. This heat plate is designed to stand directly on top of cast iron or cast stainless burners....

In Stock

$68.01

Add

Parts for Burner Shields Grills: 17-7/8" X 4" Stainless Steel Kenmore Heat Plate

17-7/8" X 4" Stainless Steel Kenmore Heat Plate

Item# KENHP7

Stainless steel "vented" tent shaped heat plate. Measures 17-7/8" long X 4" wide. Features 6 vents, 3 on each side of the peak. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

In Stock

$18.77

Add

Parts for Burner Shields Grills: Briquette Tray - Stainless Steel - Includes Briquettes (17-7/8in. x 10-5/8in.)

Briquette Tray - Stainless Steel - Includes Briquettes (17-7/8in. x 10-5/8in.)

Item# ALFBT3

Premium Stainless Steel Briquette Tray crafted from high-quality 304 grade stainless steel for durability and longevity, paired with 18 top-quality kiln dried Pyramid Ceramic Briquettes. This combination is a direct replacement for Alfresco OEM Part 510-0677,...

In Stock

$162.76

Add

Parts for Burner Shields Grills: Briquette Tray - Stainless Steel - (17-7/8in. x 12-5/8in.)

Briquette Tray - Stainless Steel - (17-7/8in. x 12-5/8in.)

Item# ALFBT2

Premium Stainless Steel Briquette Tray, designed to hold 24 ceramic briquettes (sold separately). Crafted from 304 grade high-quality stainless steel for durability and longevity. This tray is a direct replacement for Alfresco ALX2 models OEM Part...

In Stock

$72.20

Add

Parts for Burner Shields Grills: 18" Diameter Round Heat Shield, Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker

18" Diameter Round Heat Shield, Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker

Item# 29101553

18" diameter "round" heat shield for Charbroil Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker. Genuine Charbroil Part.

In Stock

$11.99

Add

Parts for Burner Shields Grills: 18" X 5-1/2" Briquette Tray With Briquettes, (Replaces Viking OEM Part 032370-000)

18" X 5-1/2" Briquette Tray With Briquettes, (Replaces Viking OEM Part 032370-000)

Item# VIKCT2

18" long X 5-1/2" wide stainless steel briquette tray with briquettes. Includes 16 pyramid shaped briquettes. Comes fully assembled. Designed to use with Viking models that utilize burner part VIKU1-IBR (sold separately). Fits models VGBQ33002RENS,...

In Stock

$114.76

Add

Parts for Burner Shields Grills: 18" x 6-1/8" Briquette Tray With Briquettes, Wolf And Twin Eagles (Replaces Wolf OEM Part 814556)

18" x 6-1/8" Briquette Tray With Briquettes, Wolf And Twin Eagles (Replaces Wolf OEM Part 814556)

Item# WLFTECT1

18" long X 6-1/8" wide stainless steel briquette tray with briquettes. Fits Wolf OG30, 42, 54 and many Twin Eagles models. Features a removable center rail that enables you to remove/replace the briquettes and heavy gauge 304 grade stainless...

In Stock

$104.90

Add

Parts for Burner Shields Grills: 18" x 12-1/8" Briquette Tray With Briquettes, Wolf And Twin Eagles (Replaces Wolf OEM Part 814552)

18" x 12-1/8" Briquette Tray With Briquettes, Wolf And Twin Eagles (Replaces Wolf OEM Part 814552)

Item# WLFTECT2

18" long X 12-1/8" wide stainless steel briquette tray with briquettes. Fits Wolf OG30, 42, 54 and many Twin Eagles models. Features 2 removable rails that enable you to remove/replace the briquettes and heavy gauge 304 grade stainless construction....

In Stock

$182.38

Add

Parts for Burner Shields Grills: 18-1/8" x 7-1/4" Stainless Steel Briquet Holder with Briquets

18-1/8" x 7-1/4" Stainless Steel Briquet Holder with Briquets

Item# TCCFT

Stainless steel briquet holder measures 18-1/8" X 7-1/4". Includes briquets. More than one required, sold by each.

In Stock

$49.28

Add

Parts for Burner Shields Grills: Set of 4 Summit 400/600 Series Stainless Steel Flavorizer Bars "Model Years 2007 - 2023"

Set of 4 Summit 400/600 Series Stainless Steel Flavorizer Bars "Model Years 2007 - 2023"

Item# 70375

Set of 4 heavy gauge stainless steel flavorizer bars for Summit 400/600, "model years 2007 - 2023". Note: To replace all the bars you will need to order either another set of 4 or set of 5 as required for your model. Bars measure 18-1/8" long X...

In Stock

$41.15

Add

Parts for Burner Shields Grills: Set of 5 Summit 400/600 Series Stainless Steel Flavorizer Bars "Model Years 2007 - 2023"

Set of 5 Summit 400/600 Series Stainless Steel Flavorizer Bars "Model Years 2007 - 2023"

Item# 70376

Set of 5 heavy gauge stainless steel flavorizer bars for Summit 400/600, "model years 2007 - 2023". Note: To replace all the bars you will need to order either another set of 4 or set of 5 as required for your model. Bars measure 18-1/8" long X...

In Stock

$49.56

Add

Parts for Burner Shields Grills: 18-1/2" X 4" Stainless Steel Heat Plate, Wolf BBQ and BBQ2 Series (Replaces Wolf OEM Part 815590)

18-1/2" X 4" Stainless Steel Heat Plate, Wolf BBQ and BBQ2 Series (Replaces Wolf OEM Part 815590)

Item# WLFHP1

18-1/2" X 4" stainless steel, vented heat plate. Fits Wolf BBQ and BBQ2 Series. Heavy gauge 304 grade stainless construction. Features tapered cut on one end and venting on both sides. (Replaces Wolf OEM Part 815590). Made In...

SOLD OUT: Expected 4/14/2025

$51.31

Parts for Burner Shields Grills: 18-5/8" X 9-7/8" DCS Radiant Tube Holder. (Replaces OEM Part 214081P)

18-5/8" X 9-7/8" DCS Radiant Tube Holder. (Replaces OEM Part 214081P)

Item# DCSHP3

Stainless steel radiant tube holder for DCS. Measures 18-5/8" front to back X 9-7/8" wide. This tray holds eighteen 9-1/2" ceramic radiant tubes. (Radiant tubes not included and are shown for display only, for ceramic tubes...

In Stock

$105.01

Add

Parts for Burner Shields Grills: DCS Radiant Tray With Ceramic Tubes, "Complete Kit" (Replaces OEM Part 214081P With 18 Ceramic Tubes)

DCS Radiant Tray With Ceramic Tubes, "Complete Kit" (Replaces OEM Part 214081P With 18 Ceramic Tubes)

Item# DCSRADIANT-KIT

DCS "Tray and Tube" Complete Kit. Includes one stainless steel holder tray and "18" ceramic tubes. The tray measures 18-5/8" front to back X 9-7/8" wide and each ceramic tube is 9-1/2" long. Fits many DCS...

In Stock

$135.99

Add

Parts for Burner Shields Grills: 18-3/4" X 10-1/8" Burner Heat Distribution Shield

18-3/4" X 10-1/8" Burner Heat Distribution Shield

Item# 99051

Black porcelain coated heat distribution plate. Measures 18-3/4" front to back X 10-1/8" wide. (Sold by each, more than one may be required.)

In Stock

$27.07

Add

Parts for Burner Shields Grills: 19" X 9-1/2" DCS Stainless Steel Heat Shield (Replaces OEM Part 213949)

19" X 9-1/2" DCS Stainless Steel Heat Shield (Replaces OEM Part 213949)

Item# DCSHP1

19" X 9-1/2" DCS stainless steel heat shield. Fits models 24, 27DBQR, 36, 36 Series, 36ABQ, 36ABQR, 36ABQAR, 36BQ, 36BQAR, 36BQR, 48, 48 Series, 48BQ, and 48BQR. (Matches to the CIDCS-LG, 20-1/2" cast iron burner). Quality Aftermarket...

In Stock

$59.00

Add

Parts for Burner Shields Grills: 19-1/4" X 2-1/2" 5000 Series Narrow Burner Shield - Drip Vaporiser Bar

19-1/4" X 2-1/2" 5000 Series Narrow Burner Shield - Drip Vaporiser Bar

Item# 4156416

Stainless steel tent shaped drip vaporiser bar, fits Masterflame 5000 Series gas grills. Measures 19-1/4" x 2-1/2".

In Stock

$11.65

Add

Parts for Burner Shields Grills: 19-1/4" x 10-1/2" Stainless Steel Briquette Holder Tray (Replaces OEM Part 80644)

19-1/4" x 10-1/2" Stainless Steel Briquette Holder Tray (Replaces OEM Part 80644)

Item# LYNXHP2

Stainless steel briquette holder tray. Measures 19-1/4" front to back X 10-1/2" wide and holds 28, 2" X 2" briquettes, see parts BQLYX and 41628. Made of 304 grade stainless steel. Fits a variety of LYNX models. More than one...

In Stock

$82.68

Add

Parts for Burner Shields Grills: 19-1/4" X 12-1/2" Stainless Steel Briquette Holder Tray (Replaces OEM Part 80645)

19-1/4" X 12-1/2" Stainless Steel Briquette Holder Tray (Replaces OEM Part 80645)

Item# LYNXHP3

Stainless steel briquette holder tray. Measures 19-1/4" front to back X 12-1/2" wide and holds 35, 2" X 2" briquettes, see parts BQLYX and 41628. Made of 304 grade stainless steel. Fits a variety of LYNX models. More than one required....

In Stock

$89.93

Add

Parts for Burner Shields Grills: Viking 6-1/8" x 21" Heat Distribution Plate

Viking 6-1/8" x 21" Heat Distribution Plate

Item# VIKHP1

Viking stainless steel heat distribution plate. Measures 21" front to back by 6-1/8" wide.

In Stock

$54.36

Add

Parts for Burner Shields Grills: 21-5/8" X 2-1/2" 6000 Series Burner Shield - Drip Vaporiser Bar

21-5/8" X 2-1/2" 6000 Series Burner Shield - Drip Vaporiser Bar

Item# 4156419

Stainless steel tent shaped drip vaporiser bar, fits Masterflame 6000 Series gas grills. Measures 21-5/8" long x 2-1/2" wide.

In Stock

Retail: $18.30

$12.75

Add

Parts for Burner Shields Grills: Flavorizer Bar Set - 5pc. - Porcelain Coated Steel - (21-1/2in.)

Flavorizer Bar Set - 5pc. - Porcelain Coated Steel - (21-1/2in.)

Item# 7534

Genuine Weber® Flavorizer Bars made in Porcelain Coated Steel. Set of five Flavorizer Bars/Burner Shields that measure 21-1/2in. Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them...

In Stock

Retail: $75.99

$65.99

Add

Parts for Burner Shields Grills: Flavorizer Bar Set - 5pc. - Stainless Steel - (21-1/2in.)

Flavorizer Bar Set - 5pc. - Stainless Steel - (21-1/2in.)

Item# 65902

Genuine Weber® Flavorizer Bars made in Stainless Steel. Set of five Flavorizer Bars/Burner Shields that measure 21-1/2in. Weber® Stainless Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the...

In Stock

$73.45

Add

Parts for Burner Shields Grills: 21-1/2" X 5-1/2" Briquette Tray With Briquettes, (Replaces Viking OEM Part 032381-000)

21-1/2" X 5-1/2" Briquette Tray With Briquettes, (Replaces Viking OEM Part 032381-000)

Item# VIKCT1

21-1/2" long X 5-1/2" wide stainless steel briquette tray with briquettes. Includes 18 ceramic pyramid shaped briquettes. Comes fully assembled. Designed to use with Viking models that utilize burner part VIKU1-IBR (sold separately). Fits Viking...

In Stock

$128.11

Add

Parts for Burner Shields Grills: Flavorizer Bar Set - 5pc. - Porcelain Coated Steel - (22-1/2in.)

Flavorizer Bar Set - 5pc. - Porcelain Coated Steel - (22-1/2in.)

Item# 7536

Genuine Weber® Steel Flavorizer Bars finished in a heat resistant porcelain enamel coating. 5 piece set, each bar measures 22-1/2in. Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting...

In Stock

Retail: $75.99

$65.99

Add

Parts for Burner Shields Grills: Flavorizer Bar Set - 5pc. - Stainless Steel - (22-1/2in.)

Flavorizer Bar Set - 5pc. - Stainless Steel - (22-1/2in.)

Item# 65903

Genuine Weber® Flavorizer Bars made in Stainless Steel. Set of five Flavorizer Bars/Burner Shields that measure 22-1/2in. Weber® Stainless Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the...

In Stock

$85.75

Add

Parts for Burner Shields Grills: Stainless Heat Deflectors (Set of 2), Genesis 300 "Model Years 2011-2016" (Replaces Part 65505)

Stainless Heat Deflectors (Set of 2), Genesis 300 "Model Years 2011-2016" (Replaces Part 65505)

Item# WEBHD

Set of 2, "stainless steel" heat deflectors, (installed below the burners). Fit Genesis 300 Series, 2011-2016 models (with upfront controls). Each deflector measures 13-1/4" front to back by 8-3/4" wide (width measurement made from edge to...

In Stock

$51.39

Add

Parts for Burner Shields Grills: Summit Silver/Gold/Platinum C/C4 And D/D4 Stainless Steel #9898 Flavorizer Bar Set

Summit Silver/Gold/Platinum C/C4 And D/D4 Stainless Steel #9898 Flavorizer Bar Set

Item# 9898

Summit Silver/Gold/Platinum C/C4 and D/D4 Series, stainless steel flavorizer bar set. Two sections with 4 bars each, the set has a total of 8 bars. This set of bars is used with Summit Silver/Gold/Platinum models which are equipped with the smoker...

In Stock

$319.00

Add

Parts for Burner Shields Grills: Viking 5-1/2" x 23.5" Heat Distribution Plate

Viking 5-1/2" x 23.5" Heat Distribution Plate

Item# VIKHP2

Viking, stainless steel heat distribution plate. Measures 23-1/2" front to back (including the mounting tabs) X 5-1/2" wide.

In Stock

$81.36

Add

Parts for Burner Shields Grills: Stainless Steel Flavorizer Bar Set (Double Stacked)

Stainless Steel Flavorizer Bar Set (Double Stacked)

Item# 65901

Full set of 13 stainless steel flavorizer bars (8 short and 5 long). The short bars are 16" and the long bars are 23-3/8". Installed in unique criss-cross "double stacked" configuration. Replaces old Weber Part Number 7538....

In Stock

$135.25

Add

Parts for Burner Shields Grills: Summit Silver/Gold/Platinum A/A4 & B/B4 Stainless Steel #9896 Flavorizer Bar Set

Summit Silver/Gold/Platinum A/A4 & B/B4 Stainless Steel #9896 Flavorizer Bar Set

Item# 9896

Summit Silver/Gold/Platinum A/A4 and B/B4, stainless steel flavorizer bar set. One section is made up of 5 bars and the other section 4 bars, the set has a total of 9 bars. The bars measure 15-7/8" front to back and the total width left to right of both...

In Stock

$289.00

Add

Parts for Burner Shields Grills: Stainless Steel Flavorizer Bar Set

Stainless Steel Flavorizer Bar Set

Item# 7538

Full set of 13 stainless steel flavorizer bars (8 short and 5 long). The short bars are 16" and the long bars are 23-3/8". Installed in unique criss-cross "double stacked" configuration. Genuine Weber Part.

In Stock

$135.25

Add

Parts for Burner Shields Grills: Porcelain Coated Flavorizer Bar Set (Double Stacked) Replaces OEM Part 9813

Porcelain Coated Flavorizer Bar Set (Double Stacked) Replaces OEM Part 9813

Item# 99813

Full set of 13 porcelain coated flavorizer bars. Includes 8 short and 5 long bars. The short bars measure 16" and the long bars are 23-3/8". Installed in unique criss-cross double stacked configuration. Replaces OEM Part 9813....

In Stock

$74.78

Add

Parts for Burner Shields Grills: 16" Diameter Round Heat Shield, Big Easy "Tru-Infrared" Turkey Fryer

16" Diameter Round Heat Shield, Big Easy "Tru-Infrared" Turkey Fryer

Item# 55711123

16" diameter "round" heat shield for Charbroil Big Easy "Tru-Infrared" Turkey Fryer. Fits Model 17102065. Genuine Charbroil Part.

In Stock

$10.69

Add

Parts for Burner Shields Grills: Flavorizer Bars - 5pc - Stainless Steel - 17-1/8in X 3in. (Genesis II 310/LX 340 2017-21 Genesis 300 Series 2022-up)

Flavorizer Bars - 5pc - Stainless Steel - 17-1/8in X 3in. (Genesis II 310/LX 340 2017-21 Genesis 300 Series 2022-up)

Item# 66795

Genuine Weber Stainless Steel Flavorizer Bars—a set of five, designed specifically for Genesis II 310 & LX 340 models (2017-21) and Genesis 300 Series (2022 & newer). These bad boys are built to evenly distribute heat, vaporize drippings for...

SOLD OUT: Expected 4/7/2025

$62.25

Parts for Burner Shields Grills: 23-3/8" Long Stainless Steel Flavor Bars "Set of 5", Replaces Weber Part 9913

23-3/8" Long Stainless Steel Flavor Bars "Set of 5", Replaces Weber Part 9913

Item# WFBGP-2002

"Set of 5" stainless steel flavorizor bars. Bar dimensions are 23-3/8" long X 2-7/8" tall X 2-1/4" wide(at the base). Fits Weber Genesis Gold B & C (2001-2002) and Platinum B & C grills from 2000-2004. Quality...

In Stock

Retail: $94.20

$66.99

Add

Parts for Burner Shields Grills: 23-3/8" X 2-9/16" 7000 Series Traditional Style Burner Shield Drip Vaporiser Bar

23-3/8" X 2-9/16" 7000 Series Traditional Style Burner Shield Drip Vaporiser Bar

Item# 4156417

Stainless steel tent shaped burner shield/drip vaporiser bar, fits Masterflame 7000 Series gas grills. Measures 23-3/8 inches long X 2-9/16" wide.

In Stock

$14.19

Add

Parts for Burner Shields Grills: 16" Diameter Round Heat Shield, Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker

16" Diameter Round Heat Shield, Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker

Item# 55710188

16" diameter "round" heat shield for Charbroil Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker (SRG). Genuine Charbroil Part.

In Stock

$9.99

Add

Parts for Burner Shields Grills: 23-7/8" X 6-1/8" Porcelain Coated Heat Tent, 7000 Series

23-7/8" X 6-1/8" Porcelain Coated Heat Tent, 7000 Series

Item# 80010138

7000 Series porcelain coated steel burner shield/vaproizer bar. Measures 23-7/8" Long X 6-1/8" Wide.

In Stock

$11.79

Add

Parts for Burner Shields Grills: 24-1/2" Long "Porcelain Coated" Flavorizer Bar Set, Genesis 300 Series (Model Years 2007-2010)

24-1/2" Long "Porcelain Coated" Flavorizer Bar Set, Genesis 300 Series (Model Years 2007-2010)

Item# 7539

"Porcelain coated" flavorizer bar set for Genesis 300 Series, "model years 2007-2010", (control knobs located on the right hand side table). Includes 5 bars each measuring 24-1/2" long. Genuine Weber Part.

In Stock

Retail: $75.99

$65.99

Add

Parts for Burner Shields Grills: 24-1/2" Long "Stainless Steel" Flavorizer Bar Set (5), Genesis 300 Series (Model Years 2007-2010)

24-1/2" Long "Stainless Steel" Flavorizer Bar Set (5), Genesis 300 Series (Model Years 2007-2010)

Item# 7540

"Stainless steel" flavorizer bar set for Genesis 300 Series, "model years 2007-2010", (control knobs located on the right hand side table). Includes 5 bars each measuring 24-1/2" long. Genuine Weber Part.

In Stock

$156.99

Add

Parts for Burner Shields Grills: 29-1/4" X 4-1/8" 9000 Series Burner Shield - Drip Vaporiser Bar

29-1/4" X 4-1/8" 9000 Series Burner Shield - Drip Vaporiser Bar

Item# 4156420

Stainless steel tent shaped drip vaporiser bar. Fits Masterflame 9000 Series gas grills. Measures 29-1/4" long x 4-1/8" wide.

In Stock

$19.99

Add