Burner Shields For Your Grill

grill parts: 16" X 5-3/4" Porcelain Coated Flame Tamer
Burner Shields grill parts: 16" X 5-3/4" Porcelain Coated Flame Tamer (image #1) Burner Shields grill parts: 16" X 5-3/4" Porcelain Coated Flame Tamer (image #2) Burner Shields grill parts: 16" X 5-3/4" Porcelain Coated Flame Tamer (image #3)

16" X 5-3/4" Porcelain Coated Flame Tamer

Item# G518-0010-W1
This part is in stock. IN STOCK
$5.99
Porcelain coated flame tamer. Measures 16" long X 5-3/4" wide. Features unique center segment tab extension. Fits a variety of Sears/Kenmore models. Replaces OEM Part 80018323.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

  • Qty:
Item# 29103024
Porcelain enameled round heat tent for Charbroil "PORTABLE" Patio Bistro Tru-Infrared models. Measures 5-1/2" in diameter. Features interior threaded post for mounting to burner.
In Stock
$9.99
View
Add
Item# 4500226
Burner tent for Char-broil "Big Easy" model grills. Stamped steel vented tent measures 6" X 6". Sold individually, more than one required.
In Stock
$9.69
View
Add
Item# 92261
Charbroil "Big Easy" stainless steel heat tent with support leg frame. The leg frame measures 8-1/2" X 5-1/2" and it supports the heat tent over the burner. The heat tent measures 6" X 6". This part includes one support and one heat tent.
In Stock
Retail: $38.72
$19.06
View
Add
Item# 67060

Genuine Weber® Stainless Steel Heat Deflector for Weber Spirit II 200 and 300 Series, model years 2017 and newer. Replace your rusty, corroded heat deflector with our Weber Part 67060 stainless steel heat deflector for Weber Spirit II grills. Features mounting foot tabs at each corner and it has 3 slotted vent openings on the slanted surface face.

What’s Included:

  • (1) Weber Stainless Steel Heat Deflector:
  • Fits Spirit II 200 and 300 Series, model years 2017 and newer.
  • Measures 7-3/4in. x 4-1/4in. x 2-1/8in. (at rear peak)
  • Genuine Weber Part.
SOLD OUT: Expected In Stock 11/30/2024
Retail: $17.32
$15.65
View
Item# 29102227
Porcelain enameled round heat tent for Charbroil Patio Bistro Tru-Infrared models. Measures 8-7/8" in diameter. Features tri-pod style, three mounting leg supports. Charbroil OEM Part.
SOLD OUT: Expected In Stock 12/20/2024
$11.99
View
Item# HOLLSHLD
Stainless steel heat shield.  Measures 9" long X 4-1/4" wide.   Fits many Holland grill models. Features two 1" diameter vent holes and two mounting screw holes.  Quality Aftermarket Part, Made in USA.  Replaces Holland OEM Part HGP111060. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $42.30
$25.15
View
Add
Item# KENHP6
Stainless steel tent shaped heat plate. Measures 11-7/8" long X 4-1/8" wide". Features vent holes at each end. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $26.10
$15.47
View
Add
Item# SCHP6
Members Mark, stainless steel burner heat distribution shield. Dimensions are 8-7/16" wide X 11-7/8" long. Features mounting tab legs on each corner. More than one required. Sold individually. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $29.50
$16.99
View
Add
Item# BBQHP2

BBQ Grillware Stainless Steel Heat Distribution Burner Shield. Fits BBQ Grillware models GSF-2616J, GSF-2616 and GFC-2616. Features a unique tapered and sloped end-to-end design for heat transfer efficiency.  Designed to protect the burner, vaporize food drippings and create an even cooking surface temperature.

Measurements:

  • Length: 12-3/8in. (including mounting tabs). 
  • Width measured across the bottom edges: Side one measures (3-1/4in.) tapers to opposite side (3in.)
  • Peak with Taper: 1-3/4in. at one end, slopes to 1-7/16in. opposite side.

Fitment:

  • Fits BBQ Grillware models GSF-2616J, GSF-2616 and GFC-2616.
  • IMPORTANT: Remove protective plastic film (if present) from product prior to use.

BBQ Grillware Stainless Steel Heat Distribution Burner Shields act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Carefully engineered with a tapered and sloped design to move heat directionally and vaporize drippings and infuse your food with that smoky, savory goodness that’ll have your taste buds singing with joy.

In Stock
Retail: $23.60
$17.86
View
Add
Item# DPA104
12-1/2" x 20-1/2" Stainless steel Flavor Screen can be used to replace an existing Flavor Screen or to upgrade from ceramic briquettes to protect the burner and add flavor by catching and vaporizing food drippings. For use with P4, D4 AND H4 Broilmaster Grills.
In Stock
Retail: $119.00
$107.10
View
Add
Item# BLZ-32-083

Genuine Blaze® Stainless Steel Air Baffle Flavor Bar for Traditional and PRO Models that mounts underneath the main grill burners. Smaller sized air baffle measures 13-1/8in. x 2-3/4in.

Blaze® Stainless Steel Air Baffle Flavor Bars are the secret sauce to achieving grill perfection. It's like having your own air traffic controller for your grill, directing airflow to maintain consistent temperatures and ensuring your food cooks evenly every time, leaving you with nothing but mouthwatering results. A superior product for your premium Blaze Grill.

  • (1) Blaze® Air Baffle Flavor Bar 
  • Fit Blaze® Traditional and PRO Models
  • Installed underneath the main burners
  • Stainless Steel Construction
  • 13-1/8in. x 2-3/4in.
  • 4 mounting tabs, 2 on each side
  • Genuine Blaze OEM Part
  • Sold Individually, more than one required
In Stock
$9.32
View
Add
Item# KENHP1
Stainless steel heat plate. Measures 13-1/8" X 10-3/4". Fits many Kenmore models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $67.55
$39.99
View
Add
Item# 90641
Firemagic stainless steel heat plate/flavor grid. Measures 13-3/16" front to back X 8-3/4" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution. More than one required, sold individually.
In Stock
Retail: $74.88
$36.51
View
Add
Item# 90631
Firemagic stainless steel heat plate/flavor grid. Measures 13-3/16" front to back X 10-1/2" wide.  Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution.  More than one required, sold individually.
In Stock
Retail: $77.47
$39.77
View
Add
Item# WEBHD
Set of 2, "stainless steel" heat deflectors, (installed below the burners). Fit Genesis 300 Series, 2011-2016 models (with upfront controls). Each deflector measures 13-1/4" front to back by 8-3/4" wide (width measurement made from edge to edge with deflector upside down).   Replaces Part 65505.
In Stock
Retail: $66.45
$43.40
View
Add
Item# WEBHD
Set of 2, "stainless steel" heat deflectors, (installed below the burners). Fit Genesis 300 Series, 2011-2016 models (with upfront controls). Each deflector measures 13-1/4" front to back by 8-3/4" wide (width measurement made from edge to edge with deflector upside down).   Replaces Part 65505.
In Stock
Retail: $66.45
$43.40
View
Add
Item# 3063-S-2
Set of 2 FireMagic flavor grids. Each grid measures 13-1/4" front to back X 11-7/8" wide. This set fits all FireMagic Aurora and Choice 430/830 models. Genuine FireMagic Part.
In Stock
Retail: $167.00
$150.30
View
Add
Item# 3064-S-3
Set of 3 FireMagic stainless steel vented flavor grids. Two measure 13-1/4" front to back X 9-7/8" wide and one measures 13-1/4" front to back X 8-1/2" wide. This set fits all FireMagic Aurora and Choice 540 models. Genuine FireMagic Part.
In Stock
Retail: $242.00
$217.80
View
Add
Item# BLZ-32-084

Genuine Blaze® Stainless Steel Air Baffle Flavor Bar for Traditional Models that mounts underneath the main grill burners. Larger sized air baffle measures 13-3/8in. x 6-3/8in.

Blaze® Stainless Steel Air Baffle Flavor Bars are the secret sauce to achieving grill perfection. It's like having your own air traffic controller for your grill, directing airflow to maintain consistent temperatures and ensuring your food cooks evenly every time, leaving you with nothing but mouthwatering results. A superior product for your premium Blaze Grill.

  • (1) Blaze® Air Baffle Flavor Bar 
  • Fit Blaze® Traditional and PRO Models
  • Installed underneath the main burners
  • Stainless Steel Construction, curled lip edges
  • 13-3/8in. x 6-3/8in.
  • 4 mounting tabs, 2 on each side
  • Genuine Blaze OEM Part
  • Sold Individually, more than one required
In Stock
$19.85
View
Add
Item# SCHP1
Stainless steel burner shield. The hanging flanges at the ends of the shield are bent up and out at a 90 degree angle. The main flat part of the shield measures 13-1/2" X 4". Total length measurement including the extended flange ends is 14-5/8" IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $37.45
$19.75
View
Add
Item# 18529
13-3/4" X 4" stainless steel "divider". These heat partitions are used with the "Flav-R-Wave" system and enable better zone temperature control. Fits Broil King "Signet" and "Sovereign" models with "Tube-In-Tube" burners, model years 2006 and newer. Sold individually. Genuine Broil King Part.
In Stock
$12.99
View
Add
Item# NGHP1
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 13-3/4" long X 4-1/8" wide (measured across the bottom). Features "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $40.00
$19.99
View
Add
Item# 18429
Broil King 13-3/4" front to back X 5-7/8" wide stainless steel "Flav-R-Wave", heat distribution plate. Fits Broil King "Signet" and "Sovereign" models with "Tube-In-Tube" burners (model years 2006 and Newer).  Also fits a variety of Monarch 300 Series (2014-Newer), Huntington, Broil-Mate and Sterling models (2010 and Newer).  More than one required, sold individually.  Genuine Broil King Part.
In Stock
$12.99
View
Add
Item# FMHP1
Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 7-7/16" wide X 13-3/4" front to back. This heat plate/flavor grid is designed to stand directly on top of cast iron or cast stainless burners. Features screen style perforated venting for optimal air flow and heat distribution.  This is the "center" grid and fits Firemagic Regal 1 and Custom 1 models.  Replaces FireMagic OEM Part 3054-S.
In Stock
Retail: $99.75
$59.99
View
Add
Item# FMHP2
Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 10-11/16" wide X 13-3/4" front to back. This heat plate/flavor grid is designed to stand directly on top of cast iron or cast stainless burners. Features screen style perforated venting for optimal air flow and heat distribution.  FIts Firemagic Regal 1 and Custom 1 models.  Replaces FireMagic OEM Part 3052-S.
In Stock
Retail: $99.75
$52.29
View
Add
Item# DPA103
13-3/4" X 23-3/4" Stainless Steel Flavor Screen can be used to replace an existing Flavor Screen or to upgrade from ceramic briquettes to protect the burner and add flavor by catching and vaporizing food drippings. For use with P3, G3, D3 T3, H3, Broilmaster Grills.  Genuine Broilmaster Part.
In Stock
Retail: $129.00
$116.10
View
Add
Item# HOLLDEFL
Stainless steel heat distribution and deflector plate for main burner. Measures 14" long X 12" wide and features two 4-1/2" tall standing leg frames.  Fits many Holland BBQ models. This plate distributes heat upwards evenly to the cooking surface and also protects the burner from food drippings. Quality Aftermarket Part, Made In USA. Replaces Holland OEM Part HGP181070. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $175.00
$93.49
View
Add
Item# G458-0018-W1
Stainless steel heat tent. Fits a veriety of Charbroil Advantage Series 2, 4, and 6 burner models (2015 and newer). Measures 14-1/8" long, across the bottom (excluding mounting tabs) and 2" wide, at the base. Features 2 mounting tabs at one end and heat vent holes. Sold individually, more than one required. Important: Please measure your exisitng parts to assure fit.
In Stock
$9.99
View
Add
Item# BMHP6
Stainless steel "shallow" tent shaped burner shield. Measures 14-1/4" long X 4" wide (measured across the bottom). Features punched holes and cut-outs on both ends. Fits many Brinkmann models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $24.80
$14.35
View
Add
Item# GMNGHP1
Stainless steel burner shield. Used to protect the burner, vaporize food drippings and create an even surface temperature. Measures 14-1/2" total length measured at the bottom edge. Measures 3-3/8" wide (measured across the bottom). IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $31.75
$16.57
View
Add
Item# VCHP1
Stainless steel heat distribution shield. Measures 14-1/2" front to back X 7-1/4" wide. Sold individually, more than one are used on the grill. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $51.70
$25.50
View
Add
Item# G430-0005-W1
Porcelain coated vented heat tent. Measures 14-5/8" long (including end tabs) X 4-1/4" measured across the bottom.
In Stock
$6.49
View
Add
Item# NGHP3
14-5/8" X 4-1/4" stainless steel heat distribution shield.  Features vent holes and mounting tabs at each end.   Fits a variety of Nexgrill models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $33.45
$19.99
View
Add
Item# 80008074
Porcelain coated steel flame tamer. Dimensions are 14-5/8" X 4-1/2". Char-Broil original equipment part.
In Stock
$10.99
View
Add
Item# MFHP1
Stainless steel vented heat distribution plate. Measures 14-7/8" long X 3-1/2" wide. Fits a variety of Master Forge models.  IMPORTANT:  Please verify dimensions to assure fit. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $31.40
$17.99
View
Add
Item# G432-0096-W1
Porcelain coated "Flame Tamer" or "Burner Shield". Measures 4-1/4" wide X 14-7/8" long. Features 16 vent holes in each end. (width measurement is from edge to edge with the shield upside down and length is extreme tip to tip including the mounting tabs).
In Stock
$9.99
View
Add
Item# SDSSDT-A
Heavy duty cast aluminum heat shield/drip tray with drain pipe, for Phoenix grills. Measures 14-3/4" front to back X 23-3/8" left to right. Features angled down sides and a sloped center channel to direct grease flow to the drain pipe end opening. Includes a 7" long threaded drain pipe, already fixed to the tray.  This is a dual purpose part.  It performs as a "Heat Shield" radianting heat evenly upwards towards the cooking surface, protecting the burner from food drippings and as a "Grease Drip Tray".  Genuine Phoenix Part.
In Stock
Retail: $222.85
$148.19
View
Add
Item# KENHP3
Stainless steel tent shaped heat plate. Measures 14-15/16" long X 3-3/4" wide. Features 3 vents on each side of the plate. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $31.20
$17.59
View
Add
Item# CBHP4
Stainless steel vented burner shield or "Flame Tamer". Measures 4-1/4" width X 15" front to back (measurement includes tabs). For easier measurement we measure the width from edge to edge with the shield upside down. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $27.60
$20.84
View
Add
Item# BMHP10
Stainless steel tent shaped heat distribution plate. Measures 15" long X 5" wide (measured across the bottom) . Features 2 vents on each side and a centered cut out section on one end. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $22.90
$17.33
View
Add
Item# G361-0003-W1
Stainless steel heat tent. Fits a veriety of Charbroil Advantage Series and Performance Series models (2015 and newer). Measures 15-1/8" long, across the bottom (excluding mounting tabs) and 2" wide, at the base. Features 2 mounting tabs at one end and heat vent holes.  Sold individually, more than one required. Important: Please measure your existing parts to assure fit.
In Stock
$10.99
View
Add
Item# BMHP11
Stainless steel tent shaped burner heat shield. Measures 15-1/8" long X 3-3/4" wide (measured across the bottom). Features punched holes and cut-outs on both ends. Fits many Brinkmann models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $18.60
$14.28
View
Add
Item# NGKHP1
Stainless steel heat distribution shield. Measures 15-1/8" long X 4-1/8" wide. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $29.50
$17.02
View
Add
Item# 68843

Genuine Weber® Flavorizer Bars made in Stainless Steel that fit Spirit and Spirit II 300 Series grills manufactured from 2013 to present with front-mounted controls. Set of five Flavorizer Bars/Burner Shields that measure 15-1/4in.

Weber® Stainless Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Weber Flavorizer Bars from Grillparts.com.

Fits these following Weber grill models:

  • Weber Spirit
  • Weber Spirit II 300 Series
  • Grill models manufactured from 2013 to present

Included:

  • (5) Genuine Weber® 15-1/4in. stainless steel Weber Flavorizer Bars:
  • Durable Stainless Steel
  • Genuine Weber® Replacement Part
SOLD OUT: Expected In Stock 11/30/2024
$63.25
View
Item# G466-0024-W1
Stainless Steel heat tent. Fits Charbroil Professional, Signature and Commercial Series Tru-Infrared models, 2015 and newer. Measures 15-1/4" long and 1-7/8" wide, at the base. Features heat vent holes at each end. Sold individually, more than one required.
In Stock
$9.99
View
Add
Item# BMHP5
Stainless steel tent shaped burner shield. Measures 15-1/4" long X 3-1/8" wide (measured across the bottom). Features single mounting hole at the peak of the tent, on each end. Fits many Brinkmann models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $20.40
$15.46
View
Add
Item# 67046

Genuine Weber® Flavorizer Bars made in Porcelain Coated Steel. Set of five Weber Flavorizer Bars that fit Weber Spirit II 310 Series model years 2017 and newer.

Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Genuine Weber Flavorizer Bars from Grillparts.com.

What’s Included:

  • (5) 15-1/4in. Porcelain Coated Steel Weber Flavorizer Bars:
  • 15-1/4in. base length, 14-1/8in. peak length, 2-11/16in. wide, 2-1/8in. tall.
  • Fits Weber Spirit II 310 Series model years 2017 and newer.
  • Genuine Weber® Replacement Part
SOLD OUT: Expected In Stock 11/30/2024
Retail: $40.90
$37.05
View
Item# 7636

Genuine Weber® Steel Flavorizer Bars finished in a heat resistant porcelain enamel coating that fit Spirit and Spirit II 300 Series grills manufactured from 2013 to present with front-mounted controls. 5 piece set, each bar measures 15-1/4in.

Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Weber Flavorizer Bars from Grillparts.com.

Fits these following Weber grill models:

  • Weber Spirit
  • Weber Spirit II 300 Series
  • Grill models manufactured from 2013 to present

Included:

  • (5) Genuine Weber® 15-1/4in. Weber Flavorizer Bars:
  • 15-1/4in. long x 2-9/16in. wide
  • Durable Porcelain Coated Steel
  • Genuine Weber® Replacement Part
In Stock
Retail: $75.99
$65.99
View
Add
Item# WFBSP3-2013

Highest quality Flavorizer Bars made in 430 grade Stainless Steel that fit Spirit and Spirit II 300 Series grills manufactured from 2013 to present with front-mounted controls. Set of five Flavorizer Bars/Burner Shields that measure 15-1/4in. x 2-3/4in.

430 grade Stainless Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new high quality Flavorizer Bars for your Weber® grill from Grillparts.com.

Fits these following Weber grill models:

  • Weber Spirit
  • Weber Spirit II 300 Series
  • Grill models manufactured from 2013 to present

Included:

  • (5) 15-1/4in. stainless steel Flavorizer Bars for Weber® Grills:
  • Durable 430 Stainless Steel
  • High Quality Replacement Part
  • IMPORTANT: Remove clear protective plastic film from heat plates prior to use.
In Stock
Retail: $135.00
$69.99
View
Add
Item# 67045

Genuine Weber® Flavorizer Bars made in Porcelain Coated Steel. Set of three Weber Flavorizer Bars that fit Weber Spirit II 210 Series model years 2017 and newer.

Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Genuine Weber Flavorizer Bars from Grillparts.com.

What’s Included:

  • (3) 15-1/4in. Porcelain Coated Steel Weber Flavorizer Bars:
  • 15-1/4in. base length, 14-3/8in. peak length, 3-1/2in. wide, 2-1/2in. tall.
  • Fits Weber Spirit II 210 Series model years 2017 and newer.
  • Genuine Weber® Replacement Part
In Stock
Retail: $32.42
$28.65
View
Add
Item# 7635

Genuine Weber® Flavorizer Bars made in Porcelain Coated Steel. Set of three Weber Flavorizer Bars that fit Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present.

Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Genuine Weber Flavorizer Bars from Grillparts.com.

Fits these following Weber® gas grill model years 2013 and newer that have front-mounted controls:

  • Weber Spirit 200 series (2013+)
  • Spirit II 200 Series (2013+)

What’s Included:

  • (3) 15-1/4in. Porcelain Coated Steel Weber Flavorizer Bars:
  • 15-1/4in. x 3-1/2in.
  • Fits Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present.
  • Genuine Weber® Replacement Part
In Stock
Retail: $62.49
$52.49
View
Add
Item# WFBSP2-2013

The highest quality Flavorizer Bars for Weber grills constructed of 430 grade Stainless Steel. Set of three Flavorizer Bars that fit Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present.

Our Stainless Steel Flavorizer Bars for Weber® grills are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Weber Flavorizer Bars from Grillparts.com.

Fits these following Weber® gas grill model years 2013 and newer that have front-mounted controls:

  • Weber Spirit 200 series (2013+)
  • Spirit II 200 Series (2013+)

What’s Included:

  • (3) Stainless Steel Weber Flavorizer Bars:
  • 15-1/4in. x 3-1/2in.
  • Fits Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present.
  • 430 grade Stainless Steel
  • Highest quality aftermarket replacements
IMPORTANT: Remove clear protective plastic film from heat plates prior to use.
In Stock
Retail: $90.00
$58.99
View
Add
Item# BMHP8
Louvered heat tent measures 15-3/8" long X 3-5/8" wide (measured across the bottom). Features four louver vents on the top of the shield. Stainless steel. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $30.10
$21.94
View
Add
Item# CHMBHP3
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 15-3/8" long X 3-3/4" wide (measured across the bottom). IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $27.55
$15.99
View
Add
Item# NGSAMHP1
Sams Club and Nexgrill stainless steel heat distribution shield. Features V-notches and round vent holes at each end of the shield. The shield measures 15-3/8" X 4-7/8". (For ease of measurement we measure the width from the bottom side.) IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $33.45
$18.99
View
Add
Item# AFHP1012
Full "set of three" stainless steel heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 3400 model grills. The two right sections are notched to accommodate the rotisserie burner. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.  Made in USA.
In Stock
$58.90
View
Add
Item# AFHP1013
Full set of three "stainless steel" heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 3100/3200 model grills. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. Made in USA.
In Stock
$58.90
View
Add
Item# AFHP1014
Full set of four "stainless steel" steel heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 4400 model grills. The two center sections are notched to accommodate the rotisserie burner. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.  Made in USA.
In Stock
$74.85
View
Add
Item# AFHP1015
Full set of four "stainless steel" heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 4100/4200 model grills. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.  Made in USA.
In Stock
Retail: $132.20
$74.85
View
Add
Item# SCHP4
Stainless steel burner shield. The hanging flanges at the ends of the shield are bent down and out at a 90 degree angle. The main flat part of the shield measures 15-3/8" X 4". Total length measurement including the extended flange ends is 16-1/2". IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $38.05
$21.02
View
Add
Item# 90351
15-1/2" long X 8-5/16" wide heavy duty stainless steel vented heat shield/vaporizing panel. Fits American Outdoor Grill (AOG) 30" models. More than one required, sold individually. The AOG 30" model uses 3 panels. Replaces OEM Part 30-B-05.
In Stock
Retail: $90.35
$47.04
View
Add
Item# AOGHP1

American Outdoor Grill (AOG) Stainless Steel Vaporizing Panel for AOG 24in. and 36in. American Outdoor Grill Models. Replaces AOG OEM parts 24-B-05 and 36-B-05. Made in USA.

Includes:

  • (1) AOG stainless steel vaporizing panel/burner shield.
  • Repl. AOG OEM #24-B-05 and 36-B-05. Made in USA.
  • Measures 15-1/2in. x 10-1/2in.
  • Sold individually, more than one required for full coverage; 24in. AOG Grill models require (2); 36in. models require (3)

AOG (American Outdoor Grill) Stainless Steel Vaporizing Panels are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. AOG panels are carefully engineered with a waffle shape and unique venting to vaporize drippings and infuse your food with that smoky, savory goodness that’ll have your taste buds singing with joy.

In Stock
Retail: $65.10
$50.71
View
Add
Item# 24-B-05-2

Genuine AOG American Outdoor Grill Two Piece Stainless Steel Vaporizing Panel Set For AOG 24in. American Outdoor Grill (AOG) Models.

Set Includes:

  • Two genuine AOG stainless steel vaporizing panels/burner shields.
  • Measure 15-1/2in. x 10-1/2in. each.
  • 2 Panels= Total of 15-1/2in. x 21in. coverage.

These Genuine AOG (American Outdoor Grill) Vaporizing Panels are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it's nobody's business. AOG panels are carefully engineered with a waffle shape and unique venting to vaporize drippings and infuse your food with that smoky, savory goodness that'll have your taste buds singing with joy. 

In Stock
Retail: $225.00
$202.50
View
Add
Item# 30-B-05-3

Genuine AOG American Outdoor Grill Three Piece Stainless Steel Vaporizing Panel Set For 30in. American Outdoor Grill (AOG) Models. Three Vaporizing Panels for a Total of 15-1/2in. x 24-7/8in. coverage.

Set Includes:

  • (3) Three genuine AOG stainless steel vaporizing panels/burner shields.
  • Measure 15-1/2in. x 8-5/16in. each.
  • Total of 15-1/2in. x 24-7/8in. coverage.

These Genuine AOG (American Outdoor Grill) Vaporizing Panels are stainless steel shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it's nobody's business. AOG panels are carefully engineered with a waffle shape and unique venting to vaporize drippings and infuse your food with that smoky, savory goodness that'll have your taste buds singing with joy.

In Stock
Retail: $302.00
$271.80
View
Add
Item# DPA100
15-1/2" X 25-1/2" Stainless Steel Smoker Shutter has blinds mounted between the fire and the food. Leave open for high-temperature grilling and searing; close for slow roasting, smoking, and baking. The Smoker Shutter may be used with any P3, D3 and T3 grill.  Genuine Broilmaster Part.
In Stock
Retail: $179.00
$161.10
View
Add
Item# G465-0012-W1
Stainless steel heat tent. Fits a variety of Charbroil Advantage Series 4 burner models as well as other Charbroil Classic Duel Fuel models (2015 and newer). Measures 15-5/8" long, across the bottom edge (excluding mounting tabs) and 2" wide, at the base. Features heat vent holes and 2 mounting tabs at one end. Sold individually, more than one required. Important: Please confirm dimensions to assure fit.  Genuine Charbroil Part.
In Stock
$10.99
View
Add
Item# KENMFHP1
Stainless steel heat shield. Measures 15-5/8" long X 4-1/8" wide.  Features unique rounded top.  Fits many Kenmore and Master Forge models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $28.35
$16.59
View
Add
Item# 18431
Broil King 15-3/4" front to back X 6" wide stainless steel "Flav-R-Wave", heat distribution plate.  Fits Broil King "Baron" models with "Tube-In-Tube" burners, model years 2013 and newer.  Also fits a variety of Broil-Mate, Huntington and Sterling models, please confirm dimensions.  More than one required, sold individually.  Genuine Broil King Part.
In Stock
$13.99
View
Add
Item# MFHP2
Stainless steel vented heat distribution plate. Measures 15-3/4" long X 5-3/8" wide. Features a mounting tab on each corner and 4 slotted vents (2 on each side). Fits a variety of Master Forge models. Designed to be used with cast iron burner part CIMF1. Replaces Master Forge OEM Part 503225-10. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $40.00
$23.30
View
Add
Item# 9898
Summit Silver/Gold/Platinum C/C4 and D/D4 Series, stainless steel flavorizer bar set. Two sections with 4 bars each, the set has a total of 8 bars.  This set of bars is used with Summit Silver/Gold/Platinum models which are equipped with the smoker box accessory. The bars measure 15-7/8" front to back and the total width left to right of both sections together is 24-7/8", (including the center rail). Genuine Weber part.
In Stock
$319.00
View
Add
Item# 9898
Summit Silver/Gold/Platinum C/C4 and D/D4 Series, stainless steel flavorizer bar set. Two sections with 4 bars each, the set has a total of 8 bars.  This set of bars is used with Summit Silver/Gold/Platinum models which are equipped with the smoker box accessory. The bars measure 15-7/8" front to back and the total width left to right of both sections together is 24-7/8", (including the center rail). Genuine Weber part.
In Stock
$319.00
View
Add
Item# 9896
Summit Silver/Gold/Platinum A/A4 and B/B4, stainless steel flavorizer bar set. One section is made up of 5 bars and the other section 4 bars, the set has a total of 9 bars. The bars measure 15-7/8" front to back and the total width left to right of both sections together is 27-1/2", (including the center rail). Genuine Weber part.
SOLD OUT: Expected In Stock 11/30/2024
$289.00
View
Item# 9896
Summit Silver/Gold/Platinum A/A4 and B/B4, stainless steel flavorizer bar set. One section is made up of 5 bars and the other section 4 bars, the set has a total of 9 bars. The bars measure 15-7/8" front to back and the total width left to right of both sections together is 27-1/2", (including the center rail). Genuine Weber part.
SOLD OUT: Expected In Stock 11/30/2024
$289.00
View
Item# 9897
Two section Summit Gold/Platinum flavorizer bar set. One section is made up of 7 bars and the other 6 bars, the set has a total of 13 bars. Fits Summit Gold/Platinum A/A6 and B/B6 series. The bars measure 15-7/8" front to back and the total width left to right of both sections together is 35-5/8", (including the center rail). Genuine Weber part.
In Stock
$359.85
View
Add
Item# 55710188
16" diameter "round" heat shield for Charbroil Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker (SRG). Genuine Charbroil Part.
In Stock
$9.99
View
Add
Item# 55711123
16" diameter "round" heat shield for Charbroil Big Easy "Tru-Infrared" Turkey Fryer. Fits Model 17102065. Genuine Charbroil Part.
In Stock
$10.69
View
Add
Item# G501-0008-W1
Burner shield or "Flame Tamer". Porcelain Coated. Measures 3-3/4" wide X 16" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.
In Stock
$9.99
View
Add
Item# 80006357
Burner shield or "Flame Tamer". Porcelain coated. Measures 3-3/4" width X 16" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.
In Stock
$9.99
View
Add
Item# PFHP2
Stainless steel, tent shaped burner shield. Measures 16" long X 4" wide (measured across the bottom). Features 4 slots and 4 vents on each side of the tent. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $35.40
$17.79
View
Add
Item# G518-0010-W1
Porcelain coated flame tamer. Measures 16" long X 5-3/4" wide. Features unique center segment tab extension. Fits a variety of Sears/Kenmore models. Replaces OEM Part 80018323.
In Stock
$5.99
View
Add
Item# BLZ-32-064

Genuine Blaze® Grills OEM Heavy Gauge Stainless Steel Flame Tamer Burner Shield Fits Blaze Grills 3, 4 and 5 Burner Models. Replaces Blaze OEM part BLZ-32-064. Measures 16in. x 6-3/4in.

These specially vented Blaze Flame Tamer heat distribution plates are stainless steel shields that act like the armor your burners deserve; protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but they’re amazing vaporizing panels that turn drippings into flavor like it's nobody's business. Blaze Flame Tamers are carefully engineered with a wave design and unique venting to vaporize drippings and infuse your food with that smoky, savory goodness that'll have your taste buds singing with joy. A superior product for your premium Blaze Grill.

  • (1) 16in. x 6-3/4in. stainless steel vented Blaze Flame Tamer heat distribution burner shield.
  • Sold individually, more than one required.
  • Heavy gauge stainless construction.
  • 3 peaked wave design
  • Genuine Blaze Grills OEM part.
SOLD OUT: Expected In Stock 12/13/2024
$54.99
View
Item# 55710188
16" diameter "round" heat shield for Charbroil Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker (SRG). Genuine Charbroil Part.
In Stock
$9.99
View
Add
Item# 55711123
16" diameter "round" heat shield for Charbroil Big Easy "Tru-Infrared" Turkey Fryer. Fits Model 17102065. Genuine Charbroil Part.
In Stock
$10.69
View
Add
Item# BBQHP1

BBQ Grillware Stainless Steel Heat Distribution Burner Shield. Fits BBQ Grillware models GGPL-2100, GSC-2418 AND GSC-2418N. Features a unique tapered and sloped end-to-end design for heat transfer efficiency. Designed to protect the burner, vaporize food drippings and create an even cooking surface temperature.

Measurements:

  • Length: 16-1/8in. (including mounting tabs). 
  • Width measured across the bottom edges: Side one measures (3-5/8in.) tapers to opposite side (3-1/4in.)
  • Peak with Taper: 2in. at one end, slopes to 1-1/2in. opposite side.

Fitment:

  • Fits BBQ Grillware models GGPL-2100, GSC-2418 AND GSC-2418N.
  • IMPORTANT: Remove protective plastic film (if present) from product prior to use.

BBQ Grillware Stainless Steel Heat Distribution Burner Shields act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Carefully engineered with a tapered and sloped design to move heat directionally and vaporize drippings and infuse your food with that smoky, savory goodness that’ll have your taste buds singing with joy.

In Stock
Retail: $28.80
$21.36
View
Add
Item# SCHP3
Stainless steel burner shield. The shield measures 16-1/8" X 4-5/8". For ease of measurement we measure the width from the bottom side. Features slotted vent holes on each side of the plate. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $47.00
$22.65
View
Add
Item# G524-0032-W1
16-1/8" porcelain coated heat plate. Features a centered tongue mounting extension on one end. Main plate area measures 6-3/4" X 14-5/8. Dimensions, including extension are, 6-3/4" X 16-1/8". Sold individually.
In Stock
$10.99
View
Add
Item# SCHP2
Members Mark burner heat distribution shield. Laser cut stainless steel. Dimensions are 8-1/4" wide X 16-1/8" long. More than one required. Sold individually. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $39.60
$22.75
View
Add
Item# 90571
Firemagic stainless steel heat plate/flavor grid. Measures 16-3/16" front to back X 8-3/4" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution. Designed to set directly onto the 4 mounting legs of FireMagic cast stainless "E" burners. More than one required, sold individually.
In Stock
Retail: $83.88
$38.69
View
Add
Item# 90561
Firemagic stainless steel heat plate/flavor grid. Measures 16-3/16" front to back X 10-1/2" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution. Designed to set directly onto the 4 mounting legs of FireMagic cast stainless "E" burners. More than one required, sold individually.
In Stock
Retail: $96.82
$47.29
View
Add
Item# 3056-S-2
Set of 2 FireMagic flavor grids. Each grid measures 16-1/4" front to back X 11-7/8" wide. This set fits all FireMagic Aurora A530 models. Genuine FireMagic Part.
In Stock
Retail: $242.00
$217.80
View
Add
Item# 3057-S-3
Set of 3 FireMagic stainless steel vented flavor grids. Two measure 16-1/4" front to back X 9-7/8" wide and one measures 16-1/4" front to back X 8-1/2" wide. This set fits all FireMagic Echelon 660, Aurora 660 and Regal 2 Magnum models. Genuine FireMagic Part.
In Stock
Retail: $308.00
$277.20
View
Add
Item# 3056-S-3
Set of 3 FireMagic stainless steel vented flavor grids. Two measure 16-1/4" front to back X 11-7/8" wide and one measures 16-1/4" front to back X 10-1/2" wide. This set fits all FireMagic Echelon 790, Aurora 790 and Monarch Magnum models. Genuine FireMagic Part.
In Stock
Retail: $363.00
$326.70
View
Add
Item# 3056-S-4
Set of 4 FireMagic stainless steel vented flavor grids. Two measure 16-1/4" front to back X 11-7/8" wide and two measures 16-1/4" front to back X 10-1/2" wide. This set fits all FireMagic Echelon E1060 and Elite Magnum models. Genuine FireMagic Part.
In Stock
Retail: $484.00
$435.60
View
Add
Item# G527-0013-W1
Porcelain coated "Flame Tamer" or "Burner Shield". Features 32 vent holes in each end. Measures 3-3/4" wide X 16-3/8" long. ( width measurement is from edge to edge with the shield upside down and length is extreme tip to tip).
In Stock
$10.99
View
Add
Item# G470-0004-W1
16-1/2" X 2" vented stainless steel heat tent. Fits a variety of Charbroil Performance/Advantage Series 4,5 and 6 burner models as well as other Charbroil models (2017 and newer). Measures 16-1/2" long, across the bottom edge (excluding mounting tabs) and 2" wide, at the base. Features 2 mounting tabs at one end. Sold individually, more than one required. Important: Please confirm dimensions to assure fit. Genuine Charbroil Part.
In Stock
$10.99
View
Add
Item# BBQHP3

Stainless Steel Heat Distribution Burner Shield features two elongated mounting slots on each end. Designed to protect the burner, vaporize food drippings and create an even cooking surface temperature.

  • Fits a variety of gas grills that require a burner shield with the dimensions of: 16-1/2in. x 4in.
  • IMPORTANT: Remove protective plastic film (if present) from product prior to use.

Stainless Steel Heat Distribution Burner Shields act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Carefully engineered to move heat directionally and vaporize drippings to infuse your food with that smoky, savory goodness that’ll have your taste buds singing with joy.

In Stock
Retail: $21.00
$16.33
View
Add
Item# COHP1
Stainless steel heat distribution shield. Features holes down each side. Measures 16-1/2" front to back X 6-1/4" wide. For easier measurement we measure the width from edge to edge with the shield upside down. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $43.60
$23.99
View
Add
Item# 94751
16-1/2" X 6-1/2" stainless steel briquette holder with ceramic briquettes. Used on a variety of Barbeque Galore, Turbo and Captain Cook model grills.
In Stock
Retail: $109.73
$52.99
View
Add
Item# DCSHP2
16-1/2" X 10-5/8" DCS Stainless Steel Heat Shield. Quality Aftermarket Part.  Replaces DCS  OEM Part 213948. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. Burner is for display purposes only; not included.
In Stock
Retail: $105.80
$58.99
View
Add
Item# BMHP1
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 16-3/4" long X 4" wide (measured across the bottom). Features slotted punched holes and cut-outs on both ends. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $18.80
$14.36
View
Add
Item# PF36-29NS
ProFire heat distribution plate. Measures 7-1/2" wide X 16-3/4" front to back. Heavy gauge stainless steel. Sold by each. This is the center plate used on models designed with 3 heat distribution plates.
In Stock
Retail: $167.15
$93.99
View
Add
Item# PF27-29NS
ProFire heat distribution plate. Measures 9-1/4" wide X 16-3/4" front to back. Heavy gauge stainless steel. Sold by each. More than one required, (2 plus additional narrower center plate used on some larger models).
In Stock
Retail: $167.15
$93.99
View
Add
Item# LYNXHP1
Stainless steel briquette holder tray. Measures 16-3/4" front to back X 9-5/8" wide and holds 28, 2" X 2" briquettes, see parts BQLYX and 41628. Made of 304 grade stainless steel; .048" thick. Fits a variety of LYNX models.  Features an attached 5-3/4" X 2-3/8" support plate with arch cut out (to rest on burner venturi neck) on one end. More than one required. (Briquettes not included, shown for display purposes only).  Quality Aftermarket Part. Replaces OEM Part Number 80006.  Important: this part does "not" include briquette retainer clips.
In Stock
Retail: $154.00
$85.99
View
Add
Item# BMHP7
Stainless steel tent shaped burner shield. Measures 16-13/16" long X 3-5/16" wide (measured across the bottom). Features single mounting hole at the peak of the tent, on each end. Fits many Brinkmann models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $21.00
$15.83
View
Add
Item# 80000947
Burner shield or "Flame Tamer". Stainless steel. Measures 4-1/2" width X 16-7/8" front to back with measurement including mounting tabs. For easier measurement we measure the width from edge to edge with the shield upside down.
In Stock
$22.65
View
Add
Item# G208-0029-W1
Burner heat tent. Black porcelain coated steel. Measures 6-1/4" wide X 16-7/8" long.
In Stock
$13.49
View
Add
Item# G422-0010-W1
Stainless steel vented heat tent. Fits Charbroil Signature Series "Conventional" (Not Tru-Infrared) 2, 3, and 4 burner models (2015 and newer). Measures 17" long, across the bottom edge X 2-1/8" wide at the base. Sold individually, more than one required. Important: Please measure your exisitng parts to assure fit. Genuine Charbroil Part.
In Stock
$9.19
View
Add
Item# 80003394
Black porcelain coated burner shield. Measures 17" long X 3-7/8" across the bottom.
In Stock
$6.49
View
Add
Item# 80017023
Burner shield heat distribution plate. Porcelain coated steel. Dimensions are 17" long X 3-7/8" measured across the bottom edge to edge. The special features are the two slotted holes on the top edges of the shield.
In Stock
$6.49
View
Add
Item# PFHP3
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17" long (measured "tip to tip" along the outside bottom edge) X 4" wide. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $28.90
$15.65
View
Add
Item# DUCHP2-SET
Set of 5 stainless steel heat distribution plates. Each plate measures 17" long X 5" wide.  Fits Ducane "Stainless and Meridian Series", 5-Burner models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $175.00
$85.99
View
Add
Item# DUCHP1-SET
Set of 3 stainless steel heat distribution plates. Each plate measures 17" long X 6-1/2" wide. Fits Ducane "Stainless and Meridian Series", 3-Burner models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $120.00
$64.99
View
Add
Item# 29102162
Heat shield, fits many Charbroil "Electric" Patio Bistro models. Measures 17-1/2" in diameter X 4" deep. Features a center drain opening and 3 threaded mounting hole grommets. Genuine Charbroil Part.
In Stock
$15.39
View
Add
Item# 29102214
Round inner reflector.  Fits many Charbroil "Electric" Patio Bistro models. Measures 17-1/2" in diameter and 5-3/4" deep. Features center drain hole opening, rim cut-out for element and 3 mounting tabs. Genuine Charbroil Part.
In Stock
$26.99
View
Add
Item# PERF13710A-14
Stainless steel ProFire "Flavor Grid" heat distribution plate. Measures 17-1/8" front to back by 12" wide. More than one required sold individually.
In Stock
Retail: $148.75
$83.79
View
Add
Item# 66796
Set of "11" stainless steel flavorizer bars for Weber Genesis II 610 and "LX" 640 models (2017 and newer). Each bar measures 17-1/8" long ,measured along the bottom edges and 16-1/8" long, measured along the top peak of the tent. The width of each bar is 2-1/2", and they stand 2-1/8" tall. Feature a cut out vent on each side. Genuine Weber Part.
In Stock
$100.95
View
Add
Item# 66797
Set of "7" stainless steel flavorizer bars for Weber Genesis II 410/"LX" 440 models (2017 and newer) and Genesis 400 Series (2022-Current) Each bar measures 17-1/8" long ,measured along the bottom edges and 16-1/8" long, measured along the top peak of the tent. The width of each bar is 2-1/2", and they stand 2-1/8" tall. Feature a cut out vent on each side. Genuine Weber Part.
In Stock
$74.85
View
Add
Item# 66794
Set of "3" stainless steel flavorizer bars for Weber Genesis II 210 and "LX" 240 models (2017 and newer). Each bar measures 17-1/8", measured along the bottom edges, and 16-1/8" measured along the top peak of the tent. The width of each bar is 3", and they stand 2-1/8" tall. Feature a cut out vent on each side. Genuine Weber Part.
In Stock
$42.45
View
Add
Item# 66795
Set of "5" stainless steel flavorizer bars for Weber Genesis II 310 and "LX" 340 models (2017-21) and Genesis 300 Series (2022-Current). Each bar measures 17-1/8", measured along the bottom edges and 16-1/8", measured along the top peak of the tent. The width of each bar is 3", and they stand 2-1/8" tall. Feature a cut out vent on each side. Genuine Weber Part.
In Stock
$62.25
View
Add
Item# 29102789
Porcelain coated steel vaporizer bar. Fits Charbroil Grill2Go Tru-Infrared (model years 2012 and newer). Measures 17-1/4" long (including mounting tabs) X 3-7/8" wide. Features dual mounting tabs on each end. Charbroil OEM Part.
SOLD OUT: Expected In Stock 11/30/2024
$17.99
View
Item# NGCHP3
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 5" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $40.00
$23.73
View
Add
Item# NGCHP4
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 5-7/8" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $35.20
$23.73
View
Add
Item# NGCHP1
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 6-13/16" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $37.00
$20.69
View
Add
Item# ALFBT1

Premium Stainless Steel Briquette Tray, designed to hold 24 ceramic briquettes (sold separately). Crafted from high-quality 304 grade stainless steel for durability and longevity. This tray is a direct replacement for Alfresco OEM Part 510-0005, ensuring a perfect fit.

Is your heat distribution briquette tray warped, rusted, and unsanitary? Upgrade to a brand new Stainless Steel Briquette Tray, designed to hold 24 ceramic briquettes (sold separately) and provide even heat distribution, while rejuvenating the hygiene of your grill. 

Key Features:

  • Premium Stainless Steel: Crafted from high-quality 304 grade stainless steel for durability and longevity.
  • Dimensions: Measuring 17-3/16in. x 12-3/4in., accommodates 24 briquettes (sold separately).
  • Made in the U.S.A.: This product is proudly manufactured in the United States.

What's Included:
• 1 Stainless steel heat plate/briquette holder tray
• Note: Briquettes are not included; this listing is for the tray only.

Compatibility:

  • Fits seamlessly with Alfresco AGBQ models and other makes/models that accept a 17-3/16in. x 12-3/4in. heat shield/heat distribution tray.
  • Directly replaces Alfresco OEM Part 510-0005 for hassle-free installation.

Revive your grill's performance and ensure even heat distribution with a new Alfresco Stainless Steel Briquette Tray. Premium construction ensures long-lasting use. Don’t forget to inspect and replace your ceramic briquettes to further freshen-up your grilling experience.

In Stock
Retail: $102.10
$75.89
View
Add
Item# NGSHP3
Stainless steel heat distribution shield. Measures 17-5/16" front to back X 8-1/4" wide. Fits a variety of Nexgrill, JennAir, Vermont Casting and Costco/Kirkland models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $50.25
$29.49
View
Add
Item# NGSHP2
Stainless steel heat distribution shield. Measures 17-5/16" front to back X 9-7/8" wide. Fits a variety of Nexgrill and Costco/Kirkland models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $50.25
$29.49
View
Add
Item# 94281
17-3/8" x 4" porcelain coated steel heat plate. Shallow tent design, stands 7/8" tall at the peak of the tent. Features 2 slotted mounting holes at one end and one at the other. Fits a variety of Brinkmann and many other Brands/Models.
In Stock
Retail: $26.76
$13.37
View
Add
Item# 18433
Broil King 17-1/2" front to back X 6" wide stainless steel "Flav-R-Wave", heat distribution plate. Fits Broil King "Regal" (2010-Newer) and "Imperial" (2009-Newer) models with "Tube-In-Tube" burners.  Also fits a variety of Huntington models, please confirm dimensions.  More than one required, sold individually.  Genuine Broil King Part.
In Stock
$14.99
View
Add
Item# PFHP1
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-9/16" long X 3-3/16" wide (measured across the bottom). Features slotted holes at one end, and a round cutout on the opposite end. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $25.95
$14.45
View
Add
Item# 62783
OEM Weber Part. Set of 5 porcelain coated steel flavorizer bars. Each bar measures 17-5/8" long (16-5/8" along the peak of the tent) and stands 2-1/8" tall.  Fits Genesis 300 series, model years 2011-2016.  Genuine Weber Part. (Replaces Part 7621). 
SOLD OUT: Expected In Stock 11/30/2024
Retail: $75.99
$65.99
View
Item# 62784
"Set of 5" stainless steel flavorizer bars. Each bar measures 17-5/8" long (16-5/8" along the peak of the tent) and stand 2-1/8" tall.  Fits Genesis 300 series, model years  2011-2016.  Genuine Weber Part. (Replaces Part 7620)
SOLD OUT: Expected In Stock 11/30/2024
Retail: $153.99
$143.99
View
Item# WFB5-2011
Set of 5 stainless steel flavorizer bars (18 Gauge/430 Grade).  Each bar measures 17-1/2" long X 2-1/4" wide X 2-3/8" tall.  Fits Weber Genesis 300 Series, model years 2011-2016.  Replaces Weber OEM Part 7620.  Quality Aftermarket Part.  IMPORTANT: Remove clear protective plastic film from heat plates (if present) prior to use.
In Stock
Retail: $135.00
$95.75
View
Add
Item# BULLHP1
17-5/8" x 4-3/8 " stainless steel, vented flame tamer/heat distribution plate. Fits most Bull models, including Angus, Brahma, Lonestar and Premium. More than one required, sold individually.  Quality Aftermarket Part. Constructed of 304 Grade-18 Gauge stainless steel.  Made in USA.  Replaces Bull OEM Part 16631. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $46.70
$36.75
View
Add
Item# NGCHP2
Heavy guage 430 stainless steel heat distribution plate. Measures 17-3/4" long x 6-3/8" across the bottom. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $42.00
$24.37
View
Add
Item# FMHP3
Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 7-7/16" wide X 17-3/4" front to back. This heat plate is designed to stand directly on top of cast iron or cast stainless burners. Features screen style perforated venting for optimal air flow and heat distribution.  This is the "center" grid for FireMagic Regal 2 models.  Replaces FireMagic OEM Part 3055-S.
In Stock
Retail: $99.75
$52.29
View
Add
Item# NGJAHP1
Heavy guage 430 stainless steel burner heat distribution plate. Measures 17-3/4" long x 8" across the bottom. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $38.65
$22.15
View
Add
Item# BMHP9
17-3/4" X 10-1/4" stainless steel heat distribution plate. Features a shallow vented tent shape with one larger hole for manually igniting the burner, when necessary.  This heat plate is designed to be used with Brinkmann "U" shaped burner part BMU1, sold separately.  (Replaces Brinkmann OEM Part 600-8750-1). IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $46.90
$36.55
View
Add
Item# FMHP4
Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 10-11/16" wide X 17-3/4" front to back. This heat plate is designed to stand directly on top of cast iron or cast stainless burners. Features screen style perforated venting for optimal air flow and heat distribution.  Fits FireMagic Elite, Monarch, Regal 2, Custom 2 and Deluxe models.  Replaces FireMagic OEM Part 3053-S.
In Stock
Retail: $131.25
$65.45
View
Add
Item# KENHP7
Stainless steel "vented" tent shaped heat plate. Measures 17-7/8" long X 4" wide. Features 6 vents, 3 on each side of the peak. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $34.00
$18.80
View
Add
Item# ALFBT3

Premium Stainless Steel Briquette Tray crafted from high-quality 304 grade stainless steel for durability and longevity, paired with 18 top-quality kiln dried Pyramid Ceramic Briquettes. This combination is a direct replacement for Alfresco OEM Part 510-0677, ensuring a perfect fit.

Is your heat distribution briquette tray warped, rusted, and unsanitary? Are your Briquettes cracked, broken and caked with grease and contaminants? Upgrade to a brand new Stainless Steel Briquette Tray that includes Briquettes and provides even heat distribution, while rejuvenating the hygiene of your grill. 

Key Features:

  • Comes completely assembled.
  • Premium Stainless Steel: Crafted from high-quality 304 grade stainless steel for durability and longevity.
  • Removeable rails that enable easy briquette replacement.
  • 18 High Quality Ceramic Briquettes.
  • Dimensions: 17-7/8in. x 10-5/8in.
  • Made in the U.S.A.: This product is proudly manufactured in the United States.

What's Included:

  • 1 Stainless steel heat plate/briquette holder tray.
  • 18 High Quality Kiln Dried Ceramic Briquettes.

Compatibility:

  • Fits most Alfresco ALXE 36 inch grill models and other makes/models that accept a 17-7/8in. x 10-5/8in. heat shield/heat distribution tray. Measure before ordering.
  • Directly replaces Alfresco OEM Part 510-0677 for hassle-free installation.

Revive your grill's performance and ensure even heat distribution with a new Alfresco Stainless Steel Briquette Tray and high-quality ceramic briquettes. Premium construction ensures long-lasting use.

In Stock
Retail: $204.20
$162.76
View
Add
Item# ALFBT2

Premium Stainless Steel Briquette Tray, designed to hold 24 ceramic briquettes (sold separately).  Crafted from 304 grade high-quality stainless steel for durability and longevity. This tray is a direct replacement for Alfresco ALX2 models OEM Part 100-1132, ensuring a perfect fit.

Is your heat distribution briquette tray warped, rusted, and unsanitary? Upgrade to a brand new Stainless Steel Briquette Tray, designed to hold 24 ceramic briquettes (sold separately) and provide even heat distribution, while rejuvenating the hygiene of your grill.

Key Features:

  • Premium Stainless Steel: Crafted from 304 grade high-quality stainless steel for durability and longevity.
  • Dimensions: 17-7/8in. x 12-5/8in., accommodates 24 briquettes (sold separately).
  • Made in the U.S.A.: This product is proudly manufactured in the United States.

What's Included:

  • 1 Stainless steel heat plate/briquette holder tray.
  • Note: Briquettes are not included; this listing is for the tray only.

Compatibility:

  • Fits seamlessly with Alfresco ALX2 models and other makes/models that accept a 17-7/8in. x 12-5/8in. heat shield/heat distribution tray. Directly replaces Alfresco OEM Part 100-1132 for hassle-free installation.

Revive your grill's performance and ensure even heat distribution with a new Alfresco Stainless Steel Briquette Tray. Premium construction ensures long-lasting use. Don’t forget to inspect and replace your ceramic briquettes to further freshen-up your grilling experience.

In Stock
Retail: $120.75
$72.20
View
Add
Item# 29101553
18" diameter "round" heat shield for Charbroil Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker. Genuine Charbroil Part.
In Stock
$11.99
View
Add
Item# VIKCT2
18" long X 5-1/2" wide stainless steel briquette tray with briquettes. Includes 16 pyramid shaped briquettes. Comes fully assembled. Designed to use with Viking models that utilize burner part VIKU1-IBR (sold separately). Fits models VGBQ33002RENS, VGBQ33603RESS, VGBQ53024, VGBQ53624, VGBQ54224, VGBQ55424, VGIQ542241NSS and VGIQ54224NSS. Replaces Viking OEM part 032370-000. Made In USA.
In Stock
Retail: $191.10
$114.79
View
Add
Item# WLFTECT1
18" long X 6-1/8" wide stainless steel briquette tray with briquettes. Fits Wolf OG30, 42, 54 and many Twin Eagles models. Features a removable center rail that enables you to remove/replace the briquettes and heavy gauge 304 grade stainless construction. Includes 12 ceramic pyramid shaped briquettes. Comes fully assembled. Replaces Wolf OEM Part 814556. Made In USA.
In Stock
Retail: $178.35
$104.90
View
Add
Item# WLFTECT2
18" long X 12-1/8" wide stainless steel briquette tray with briquettes. Fits Wolf OG30, 42, 54 and many Twin Eagles models. Features 2 removable rails that enable you to remove/replace the briquettes and heavy gauge 304 grade stainless construction. Includes 24 ceramic pyramid shaped briquettes. Comes fully assembled. Replaces Wolf OEM Part 814552. Made In USA.
In Stock
Retail: $299.10
$182.35
View
Add
Item# TCCFT
Stainless steel briquet holder measures 18-1/8" X 7-1/4". Includes briquets. More than one required, sold by each.
In Stock
Retail: $90.85
$49.25
View
Add
Item# 70375
Set of 4 heavy gauge stainless steel flavorizer bars for Summit 400/600, "model years 2007 and newer". Note: To replace all the bars you will need to order either another set of 4 or set of 5 as required for your model. Bars measure 18-1/8" long X 1-3/4" wide. Genuine Weber Part.
SOLD OUT: Expected In Stock 11/30/2024
$41.15
View
Item# 70376
Set of 5 heavy gauge stainless steel flavorizer bars for Summit 400/600, "model years 2007 and newer". Note: To replace all the bars you will need to order either another set of 4 or set of 5 as required for your model. Bars measure 18-1/8" long X 1-3/4" wide. Genuine Weber Part.
SOLD OUT: Expected In Stock 11/30/2024
$49.56
View
Item# WLFHP1
18-1/2" X 4" stainless steel, vented heat plate. Fits Wolf BBQ and BBQ2 Series. Heavy gauge 304 grade stainless construction. Features tapered cut on one end and venting on both sides. (Replaces Wolf OEM Part 815590).  Made In USA. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
In Stock
Retail: $82.85
$51.35
View
Add
Item# DCSHP3
Stainless steel radiant tube holder for DCS. Measures 18-5/8" front to back X 9-7/8" wide. This tray holds eighteen 9-1/2" ceramic radiant tubes. (Radiant tubes not included and are shown for display only, for ceramic tubes see parts DCSCT and CR9PK). Quality Aftermarket Part, Made in USA.  Replaces DCS OEM Part 214081P.
In Stock
Retail: $173.25
$89.99
View
Add
Item# DCSRADIANT-KIT
DCS "Tray and Tube" Complete Kit. Includes one stainless steel holder tray and "18" ceramic tubes. The tray measures 18-5/8" front to back X 9-7/8" wide and each ceramic tube is 9-1/2" long. Fits many DCS outdoor grills, including DCS27D/DCS27F, 36" and 48" models (that use 9-1/2" long ceramic tubes) with model numbers beginning BGA, BGB, BGC and many other 36" and 48" DCS models. Please verify dimensions. High Quality Aftermarket Part.  Minor assembly required.  (Replaces OEM Part 214081P With 18 Ceramic Tubes).  All components of this kit are Made in USA.
In Stock
$135.99
View
Add
Item# 99051
Black porcelain coated heat distribution plate. Measures 18-3/4" front to back X 10-1/8" wide. (Sold by each, more than one may be required.)
In Stock
Retail: $51.63
$27.09
View
Add
Item# DCSHP1
19" X 9-1/2" DCS stainless steel heat shield. Fits models 24, 27DBQR, 36, 36 Series, 36ABQ, 36ABQR, 36ABQAR, 36BQ, 36BQAR, 36BQR, 48, 48 Series, 48BQ, and 48BQR. (Matches to the 23601, 20-1/2" cast iron burner). Quality Aftermarket Part. Replaces DCS OEM Part 213949. Burner is for display purpoases only; not included.
In Stock
Retail: $105.80
$58.99
View
Add
Item# 4156416
Stainless steel tent shaped drip vaporiser bar, fits Masterflame 5000 Series gas grills. Measures 19-1/4" x 2-1/2".
In Stock
$11.65
View
Add
Item# LYNXHP2
Stainless steel briquette holder tray. Measures 19-1/4" front to back X 10-1/2" wide and holds 28, 2" X 2" briquettes, see parts BQLYX and 41628. Made of 304 grade stainless steel. Fits a variety of LYNX models. More than one required.  (Briquettes not included, shown for display purposes only). Replaces OEM Part Number 80644.
In Stock
Retail: $151.80
$82.65
View
Add
Item# LYNXHP3
Stainless steel briquette holder tray. Measures 19-1/4" front to back X 12-1/2" wide and holds 35, 2" X 2" briquettes, see parts BQLYX and 41628. Made of 304 grade stainless steel. Fits a variety of LYNX models. More than one required. (Briquettes not included, shown for display purposes only). Replaces OEM Part Number 80645.
In Stock
Retail: $170.00
$89.95
View
Add
Item# VIKHP1
Viking stainless steel heat distribution plate. Measures 21" front to back by 6-1/8" wide.
In Stock
Retail: $103.95
$54.39
View
Add
Item# 4156419
Stainless steel tent shaped drip vaporiser bar, fits Masterflame 6000 Series gas grills. Measures 21-5/8" long x 2-1/2" wide.
In Stock
Retail: $18.30
$12.75
View
Add
Item# 7534

Genuine Weber® Flavorizer Bars made in Porcelain Coated Steel. Set of five Flavorizer Bars/Burner Shields that measure 21-1/2in.

Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Weber Flavorizer Bars from Grillparts.com.

Fits these following Weber® gas grill models:

  • Weber Genesis Silver A
  • Weber Spirit 500 series
  • Weber Spirit 200 series
  • (Model Years Prior To 2013)

What’s Included:

  • (5) 21-1/2in. Porcelain Coated Steel Weber Flavorizer Bars:
  • Genuine Weber® Replacement Part
In Stock
Retail: $75.99
$65.99
View
Add
Item# 65902

Genuine Weber® Flavorizer Bars made in Stainless Steel. Set of five Flavorizer Bars/Burner Shields that measure 21-1/2in.

Weber® Stainless Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Weber Flavorizer Bars from Grillparts.com.

Fits these following Weber® gas grill models:

  • Weber Genesis Silver A
  • Weber Spirit 500 series
  • Weber Spirit 200 series
  • (Model Years Prior To 2013)

What’s Included:

  • (5) 21-1/2in. stainless steel Weber Flavorizer Bars:
  • Durable Stainless Steel
  • Genuine Weber® Replacement Part
In Stock
$73.45
View
Add
Item# VIKCT1
21-1/2" long X 5-1/2" wide stainless steel briquette tray with briquettes. Includes 18 ceramic pyramid shaped briquettes. Comes fully assembled. Designed to use with Viking models that utilize burner part VIKU1-IBR (sold separately). Fits Viking models VGBQ54203RE, VGBQ55403RE, VGIQ54203RE, VGIQ55404RE, VGBQ55404RENSS. Replaces Viking OEM Part 032381-000. Made In USA.
In Stock
Retail: $214.00
$128.15
View
Add
Item# 7536

Genuine Weber® Steel Flavorizer Bars finished in a heat resistant porcelain enamel coating. 5 piece set, each bar measures 22-1/2in.

Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Weber Flavorizer Bars from Grillparts.com.

Fits these following Weber grill models:

  • Weber Genesis Silver B/C
  • Weber 300 Series (2012 and older)
  • Weber Spirit 700
  • Weber 900

Included:

  • (5) 22-1/2in. Weber Flavorizer Bars in porcelain enamel coated steel:
  • Durable Porcelain Coated Steel
  • Genuine Weber® Replacement Part
In Stock
Retail: $75.99
$65.99
View
Add
Item# 65903

Genuine Weber® Flavorizer Bars made in Stainless Steel. Set of five Flavorizer Bars/Burner Shields that measure 22-1/2in.

Weber® Stainless Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the relentless assault of grease, drippings, and whatever else the grill gods throw their way. Not only does this extend the life of your burners, but vaporize drippings like it’s nobody's business. Infuse your food with that smoky, savory goodness while protecting your burners with new Weber Flavorizer Bars from Grillparts.com.

Fits these following Weber grill models:

  • Weber Genesis Silver B/C
  • Weber Spirit 300 Series (2012 and Older)
  • Weber Spirit 700
  • Weber 900

Included:

  • (5) 22-1/2in. stainless steel Weber Flavorizer Bars:
  • Durable Stainless Steel
  • Genuine Weber® Replacement Part
In Stock
$85.75
View
Add
Item# VIKHP2
Viking, stainless steel heat distribution plate. Measures 23-1/2" front to back (including the mounting tabs) X 5-1/2" wide.
In Stock
Retail: $149.00
$81.35
View
Add
Item# 65901
Full set of 13 stainless steel flavorizer bars (8 short and 5 long). The short bars are 16" and the long bars are 23-3/8". Installed in unique criss-cross "double stacked" configuration.  Replaces old Weber Part Number 7538.  Genuine Weber Part.
In Stock
$135.25
View
Add
Item# 99813
Full set of 13 porcelain coated flavorizer bars. Includes 8 short and 5 long bars. The short bars measure 16" and the long bars are 23-3/8".  Installed in unique criss-cross double stacked configuration.  Replaces OEM Part 9813. Quality Aftermarket Part.
In Stock
$74.78
View
Add
Item# 7538
Full set of 13 stainless steel flavorizer bars (8 short and 5 long). The short bars are 16" and the long bars are 23-3/8". Installed in unique criss-cross "double stacked" configuration. Genuine Weber Part.
In Stock
$135.25
View
Add
Item# 7538
Full set of 13 stainless steel flavorizer bars (8 short and 5 long). The short bars are 16" and the long bars are 23-3/8". Installed in unique criss-cross "double stacked" configuration. Genuine Weber Part.
In Stock
$135.25
View
Add
Item# WFBGP-2002
"Set of 5" stainless steel flavorizor bars. Bar dimensions are 23-3/8" long X 2-7/8" tall X 2-1/4" wide(at the base). Fits Weber Genesis Gold B & C (2001-2002) and Platinum B & C grills from 2000-2004.  Quality aftermarket part, "Made in USA".. Replaces Weber OEM Part 9913. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
SOLD OUT: Expected In Stock 11/30/2024
Retail: $94.20
$66.99
View
Item# 4156417
Stainless steel tent shaped burner shield/drip vaporiser bar, fits Masterflame 7000 Series gas grills. Measures 23-3/8 inches long X 2-9/16" wide.
In Stock
$14.19
View
Add
Item# 80010138
7000 Series porcelain coated steel burner shield/vaproizer bar. Measures 23-7/8" Long X 6-1/8" Wide.
In Stock
$11.79
View
Add
Item# 7539
"Porcelain coated" flavorizer bar set for Genesis 300 Series, "model years 2007-2010", (control knobs located on the right hand side table). Includes 5 bars each measuring 24-1/2" long.  Genuine Weber Part.
In Stock
Retail: $75.99
$65.99
View
Add
Item# 7540
"Stainless steel" flavorizer bar set for Genesis 300 Series, "model years 2007-2010", (control knobs located on the right hand side table).  Includes 5 bars each measuring 24-1/2" long.  Genuine Weber Part.
In Stock
$156.99
View
Add
Item# 4500291
Quickset 8000 Series vaporizer bar. Measures 26-1/4" X 6-1/2".
In Stock
$17.99
View
Add
Item# 4156420
Stainless steel tent shaped drip vaporiser bar. Fits Masterflame 9000 Series gas grills. Measures 29-1/4" long x 4-1/8" wide.
In Stock
$19.99
View
Add