Burner Shields For Your Grill

grill parts: 15-1/8" X 3-3/4" Burner Heat Distribution Shield
Burner Shields grill parts: 15-1/8" X 3-3/4" Burner Heat Distribution Shield (image #1) Burner Shields grill parts: 15-1/8" X 3-3/4" Burner Heat Distribution Shield (image #2) Burner Shields grill parts: 15-1/8" X 3-3/4" Burner Heat Distribution Shield (image #3)

15-1/8" X 3-3/4" Burner Heat Distribution Shield

Item# BMHP11
This item is in stockIN STOCK
$14.28
Stainless steel tent shaped burner heat shield. Measures 15-1/8" long X 3-3/4" wide (measured across the bottom). Features punched holes and cut-outs on both ends. Fits many Brinkmann models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.

Please compare part photos and descriptions. Measure when necessary. Parts may vary between models.

  • Qty:
Item# 29103024
Porcelain enameled round heat tent for Charbroil "PORTABLE" Patio Bistro Tru-Infrared models. Measures 5-1/2" in diameter. Features interior threaded post for mounting to burner.
This item is in stockIn Stock
$9.99
View 
Add
Item# 4500226
Burner tent for Char-broil "Big Easy" model grills. Stamped steel vented tent measures 6" X 6". Sold individually, more than one required.
This item is in stockIn Stock
$9.69
View 
Add
Item# 92261
Charbroil "Big Easy" stainless steel heat tent with support leg frame. The leg frame measures 8-1/2" X 5-1/2" and it supports the heat tent over the burner. The heat tent measures 6" X 6". This part includes one support and one...
This item is in stockIn Stock
Retail: $38.72
$19.06
View 
Add
Item# 67060
Genuine Weber® Stainless Steel Heat Deflector for Weber Spirit II 200 and 300 Series, model years 2017 and newer. Replace your rusty, corroded heat deflector with our Weber Part 67060 stainless steel heat deflector for Weber Spirit II grills....
This item is in stockIn Stock
Retail: $17.32
$15.65
View 
Add
Item# 29102227
Porcelain enameled round heat tent for Charbroil Patio Bistro Tru-Infrared models. Measures 8-7/8" in diameter. Features tri-pod style, three mounting leg supports. Charbroil OEM Part.
This item is sold outSOLD OUT: Expected 3/28/2025
$11.99
View
Item# HOLLSHLD
Stainless steel heat shield.  Measures 9" long X 4-1/4" wide.   Fits many Holland grill models. Features two 1" diameter vent holes and two mounting screw holes.  Quality Aftermarket Part, Made in USA.  Replaces Holland...
This item is in stockIn Stock
Retail: $42.30
$25.15
View 
Add
Item# KENHP6
Stainless steel tent shaped heat plate. Measures 11-7/8" long X 4-1/8" wide". Features vent holes at each end. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$15.47
View 
Add
Item# SCHP6
Members Mark, stainless steel burner heat distribution shield. Dimensions are 8-7/16" wide X 11-7/8" long. Features mounting tab legs on each corner. More than one required. Sold individually. IMPORTANT: Remove protective plastic film (if...
This item is in stockIn Stock
Retail: $29.50
$16.99
View 
Add
Item# BBQHP2
BBQ Grillware Stainless Steel Heat Distribution Burner Shield. Fits BBQ Grillware models GSF-2616J, GSF-2616 and GFC-2616. Features a unique tapered and sloped end-to-end design for heat transfer efficiency.  Designed to protect the burner, vaporize food...
This item is in stockIn Stock
$17.86
View 
Add
Item# DPA104
12-1/2" x 20-1/2" Stainless steel Flavor Screen can be used to replace an existing Flavor Screen or to upgrade from ceramic briquettes to protect the burner and add flavor by catching and vaporizing food drippings. For use with P4, D4 AND H4...
This item is in stockIn Stock
Retail: $119.00
$107.10
View 
Add
Item# BLZ-32-083
Genuine Blaze® Stainless Steel Air Baffle Flavor Bar for Traditional and PRO Models that mounts underneath the main grill burners. Smaller sized air baffle measures 13-1/8in. x 2-3/4in. Blaze® Stainless Steel Air Baffle Flavor Bars are the secret...
This item is in stockIn Stock
$9.32
View 
Add
Item# KENHP1
Stainless steel heat plate. Measures 13-1/8" X 10-3/4". Fits many Kenmore models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$39.97
View 
Add
Item# 90641
Firemagic stainless steel heat plate/flavor grid. Measures 13-3/16" front to back X 8-3/4" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution. More than one...
This item is in stockIn Stock
Retail: $74.88
$36.51
View 
Add
Item# 90631
Firemagic stainless steel heat plate/flavor grid. Measures 13-3/16" front to back X 10-1/2" wide.  Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat...
This item is in stockIn Stock
$39.73
View 
Add
Item# 3063-S-2
Set of 2 FireMagic flavor grids. Each grid measures 13-1/4" front to back X 11-7/8" wide. This set fits all FireMagic Aurora and Choice 430/830 models. Genuine FireMagic Part.
This item is in stockIn Stock
Retail: $167.00
$150.30
View 
Add
Item# 3064-S-3
Set of 3 FireMagic stainless steel vented flavor grids. Two measure 13-1/4" front to back X 9-7/8" wide and one measures 13-1/4" front to back X 8-1/2" wide. This set fits all FireMagic Aurora and Choice 540 models. Genuine...
This item is in stockIn Stock
Retail: $242.00
$217.80
View 
Add
Item# BLZ-32-084
Genuine Blaze® Stainless Steel Air Baffle Flavor Bar for Traditional Models that mounts underneath the main grill burners. Larger sized air baffle measures 13-3/8in. x 6-3/8in. Blaze® Stainless Steel Air Baffle Flavor Bars are the secret sauce to...
This item is sold outOUT OF STOCK
$19.85
View
Item# SCHP1
Stainless steel burner shield. The hanging flanges at the ends of the shield are bent up and out at a 90 degree angle. The main flat part of the shield measures 13-1/2" X 4". Total length measurement including the extended flange ends is...
This item is in stockIn Stock
$19.73
View 
Add
Item# 18529
13-3/4" X 4" stainless steel "divider". These heat partitions are used with the "Flav-R-Wave" system and enable better zone temperature control. Fits Broil King "Signet" and "Sovereign" models with...
This item is in stockIn Stock
$12.99
View 
Add
Item# NGHP1
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 13-3/4" long X 4-1/8" wide (measured across the bottom). Features "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective plastic film (if present) from heat...
This item is in stockIn Stock
$20.72
View 
Add
Item# 18429
Broil King 13-3/4" front to back X 5-7/8" wide stainless steel "Flav-R-Wave", heat distribution plate. Fits Broil King "Signet" and "Sovereign" models with "Tube-In-Tube" burners (model years 2006 and...
This item is in stockIn Stock
$12.99
View 
Add
Item# FMHP1
Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 7-7/16" wide X 13-3/4" front to back. This heat plate/flavor grid is designed to stand directly on top of cast iron or cast...
This item is in stockIn Stock
$60.01
View 
Add
Item# FMHP2
Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 10-11/16" wide X 13-3/4" front to back. This heat plate/flavor grid is designed to stand directly on top of cast iron or cast...
This item is in stockIn Stock
$52.30
View 
Add
Item# DPA103
13-3/4" X 23-3/4" Stainless Steel Flavor Screen can be used to replace an existing Flavor Screen or to upgrade from ceramic briquettes to protect the burner and add flavor by catching and vaporizing food drippings. For use with P3, G3, D3 T3,...
This item is in stockIn Stock
Retail: $129.00
$116.10
View 
Add
Item# HOLLDEFL
Stainless steel heat distribution and deflector plate for main burner. Measures 14" long X 12" wide and features two 4-1/2" tall standing leg frames.  Fits many Holland BBQ models. This plate distributes heat upwards evenly to the cooking...
This item is in stockIn Stock
Retail: $175.00
$93.49
View 
Add
Item# G458-0018-W1
Stainless steel heat tent. Fits a veriety of Charbroil Advantage Series 2, 4, and 6 burner models (2015 and newer). Measures 14-1/8" long, across the bottom (excluding mounting tabs) and 2" wide, at the base. Features 2...
This item is in stockIn Stock
$9.99
View 
Add
Item# BMHP6
Stainless steel "shallow" tent shaped burner shield. Measures 14-1/4" long X 4" wide (measured across the bottom). Features punched holes and cut-outs on both ends. Fits many Brinkmann models. IMPORTANT: Remove protective plastic film...
This item is in stockIn Stock
$14.37
View 
Add
Item# GMNGHP1
Stainless steel burner shield. Used to protect the burner, vaporize food drippings and create an even surface temperature. Measures 14-1/2" total length measured at the bottom edge. Measures 3-3/8" wide (measured across the bottom). IMPORTANT:...
This item is in stockIn Stock
$16.58
View 
Add
Item# VCHP1
Stainless steel heat distribution shield. Measures 14-1/2" front to back X 7-1/4" wide. Sold individually, more than one are used on the grill. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$26.77
View 
Add
Item# G430-0005-W1
Porcelain coated vented heat tent. Measures 14-5/8" long (including end tabs) X 4-1/4" measured across the bottom.
This item is in stockIn Stock
$7.49
View 
Add
Item# NGHP3
14-5/8" X 4-1/4" stainless steel heat distribution shield.  Features vent holes and mounting tabs at each end.   Fits a variety of Nexgrill models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to...
This item is in stockIn Stock
$19.97
View 
Add
Item# 80008074
Porcelain coated steel flame tamer. Dimensions are 14-5/8" X 4-1/2". Char-Broil original equipment part.
This item is in stockIn Stock
$10.99
View 
Add
Item# MFHP1
Stainless steel vented heat distribution plate. Measures 14-7/8" long X 3-1/2" wide. Fits a variety of Master Forge models.  IMPORTANT:  Please verify dimensions to assure fit. IMPORTANT: Remove protective plastic film (if present)...
This item is in stockIn Stock
$17.97
View 
Add
Item# G432-0096-W1
Porcelain coated "Flame Tamer" or "Burner Shield". Measures 4-1/4" wide X 14-7/8" long. Features 16 vent holes in each end. (width measurement is from edge to edge with the shield upside down and length is extreme tip to tip...
This item is in stockIn Stock
$9.99
View 
Add
Item# SDSSDT-A
Heavy duty cast aluminum heat shield/drip tray with drain pipe, for Phoenix grills. Measures 14-3/4" front to back X 23-3/8" left to right. Features angled down sides and a sloped center channel to direct grease flow to the drain pipe end opening....
This item is in stockIn Stock
$148.17
View 
Add
Item# KENHP3
Stainless steel tent shaped heat plate. Measures 14-15/16" long X 3-3/4" wide. Features 3 vents on each side of the plate. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$17.62
View 
Add
Item# CBHP4
Stainless steel vented burner shield or "Flame Tamer". Measures 4-1/4" width X 15" front to back (measurement includes tabs). For easier measurement we measure the width from edge to edge with the shield upside down. IMPORTANT: Remove...
This item is in stockIn Stock
$20.84
View 
Add
Item# BMHP10
Stainless steel tent shaped heat distribution plate. Measures 15" long X 5" wide (measured across the bottom) . Features 2 vents on each side and a centered cut out section on one end. IMPORTANT: Remove protective plastic film...
This item is in stockIn Stock
$15.26
View 
Add
Item# G361-0003-W1
Stainless steel heat tent. Fits a veriety of Charbroil Advantage Series and Performance Series models (2015 and newer). Measures 15-1/8" long, across the bottom (excluding mounting tabs) and 2" wide, at the base. Features 2...
This item is in stockIn Stock
$10.99
View 
Add
Item# BMHP11
Stainless steel tent shaped burner heat shield. Measures 15-1/8" long X 3-3/4" wide (measured across the bottom). Features punched holes and cut-outs on both ends. Fits many Brinkmann models. IMPORTANT: Remove protective plastic film (if...
This item is in stockIn Stock
$14.28
View 
Add
Item# NGKHP1
Stainless steel heat distribution shield. Measures 15-1/8" long X 4-1/8" wide. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$16.99
View 
Add
Item# G466-0024-W1
Stainless Steel heat tent. Fits Charbroil Professional, Signature and Commercial Series Tru-Infrared models, 2015 and newer. Measures 15-1/4" long and 1-7/8" wide, at the base. Features heat vent holes at each end. Sold individually, more...
This item is in stockIn Stock
$9.99
View 
Add
Item# BMHP5
Stainless steel tent shaped burner shield. Measures 15-1/4" long X 3-1/8" wide (measured across the bottom). Features single mounting hole at the peak of the tent, on each end. Fits many Brinkmann models. IMPORTANT: Remove protective plastic...
This item is in stockIn Stock
$15.46
View 
Add
Item# 67046
Genuine Weber® Flavorizer Bars made in Porcelain Coated Steel. Set of five Weber Flavorizer Bars that fit Weber Spirit II 310 Series model years 2017 and newer. Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your...
This item is in stockIn Stock
Retail: $40.90
$37.05
View 
Add
Item# 7636
Genuine Weber® Steel Flavorizer Bars finished in a heat resistant porcelain enamel coating that fit Spirit and Spirit II 300 Series grills manufactured from 2013 to present with front-mounted controls. 5 piece set, each bar measures...
This item is in stockIn Stock
Retail: $75.99
$65.99
View 
Add
Item# WFBSP3-2013
Highest quality Flavorizer Bars made in 430 grade Stainless Steel that fit Spirit and Spirit II 300 Series grills manufactured from 2013 to present with front-mounted controls. Set of five Flavorizer Bars/Burner Shields that measure 15-1/4in. x...
This item is in stockIn Stock
$104.98
View 
Add
Item# 67045
Genuine Weber® Flavorizer Bars made in Porcelain Coated Steel. Set of three Weber Flavorizer Bars that fit Weber Spirit II 210 Series model years 2017 and newer. Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your...
This item is in stockIn Stock
Retail: $32.42
$28.65
View 
Add
Item# 7635
Genuine Weber® Flavorizer Bars made in Porcelain Coated Steel. Set of three Weber Flavorizer Bars that fit Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present. Weber® Porcelain Coated Steel Flavorizer Bars are shields that...
This item is in stockIn Stock
Retail: $62.49
$52.49
View 
Add
Item# WFBSP2-2013
The highest quality Flavorizer Bars for Weber grills constructed of 430 grade Stainless Steel. Set of three Flavorizer Bars that fit Weber Spirit 200 and Spirit II 200 Series grills model years 2013 to present. Our Stainless Steel Flavorizer Bars for...
This item is in stockIn Stock
$86.43
View 
Add
Item# BMHP8
Louvered heat tent measures 15-3/8" long X 3-5/8" wide (measured across the bottom). Features four louver vents on the top of the shield. Stainless steel. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$21.94
View 
Add
Item# CHMBHP3
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 15-3/8" long X 3-3/4" wide (measured across the bottom). IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$15.97
View 
Add
Item# NGSAMHP1
Sams Club and Nexgrill stainless steel heat distribution shield. Features V-notches and round vent holes at each end of the shield. The shield measures 15-3/8" X 4-7/8". (For ease of measurement we measure the width from the bottom...
This item is in stockIn Stock
$18.97
View 
Add
Item# AFHP1012
Full "set of three" stainless steel heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 3400 model grills. The two right sections are notched to...
This item is in stockIn Stock
$58.90
View 
Add
Item# AFHP1013
Full set of three "stainless steel" heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 3100/3200 model grills. IMPORTANT: Remove protective plastic...
This item is in stockIn Stock
$58.90
View 
Add
Item# AFHP1014
Full set of four "stainless steel" steel heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 4400 model grills. The two center sections are notched to...
This item is in stockIn Stock
$74.85
View 
Add
Item# AFHP1015
Full set of four "stainless steel" heat distribution plates. Each section measures 15-3/8" front to back X 6" wide as measured across the bottom. Fits some Ducane Affinity 4100/4200 model grills. IMPORTANT: Remove protective plastic...
This item is in stockIn Stock
Retail: $132.20
$74.85
View 
Add
Item# SCHP4
Stainless steel burner shield. The hanging flanges at the ends of the shield are bent down and out at a 90 degree angle. The main flat part of the shield measures 15-3/8" X 4". Total length measurement including the extended flange ends is...
This item is in stockIn Stock
Retail: $38.05
$21.02
View 
Add
Item# 90351
15-1/2" long X 8-5/16" wide heavy duty stainless steel vented heat shield/vaporizing panel. Fits American Outdoor Grill (AOG) 30" models. More than one required, sold individually. The AOG 30" model uses 3 panels. Replaces OEM Part 30-B-05.
This item is in stockIn Stock
$47.00
View 
Add
Item# AOGHP1
American Outdoor Grill (AOG) Stainless Steel Vaporizing Panel for AOG 24in. and 36in. American Outdoor Grill Models. Replaces AOG OEM parts 24-B-05 and 36-B-05. Made in USA. Includes: (1) AOG stainless steel vaporizing panel/burner shield. Repl....
This item is in stockIn Stock
$50.71
View 
Add
Item# 24-B-05-2
Genuine AOG American Outdoor Grill Two Piece Stainless Steel Vaporizing Panel Set For AOG 24in. American Outdoor Grill (AOG) Models. Set Includes: Two genuine AOG stainless steel vaporizing panels/burner shields. Measure 15-1/2in. x 10-1/2in....
This item is in stockIn Stock
Retail: $225.00
$202.50
View 
Add
Item# 30-B-05-3
Genuine AOG American Outdoor Grill Three Piece Stainless Steel Vaporizing Panel Set For 30in. American Outdoor Grill (AOG) Models. Three Vaporizing Panels for a Total of 15-1/2in. x 24-7/8in. coverage. Set Includes: (3) Three genuine AOG stainless...
This item is in stockIn Stock
Retail: $302.00
$271.80
View 
Add
Item# DPA100
15-1/2" X 25-1/2" Stainless Steel Smoker Shutter has blinds mounted between the fire and the food. Leave open for high-temperature grilling and searing; close for slow roasting, smoking, and baking. The Smoker Shutter may be used with any P3,...
This item is in stockIn Stock
Retail: $179.00
$161.10
View 
Add
Item# G465-0012-W1
Stainless steel heat tent. Fits a variety of Charbroil Advantage Series 4 burner models as well as other Charbroil Classic Duel Fuel models (2015 and newer). Measures 15-5/8" long, across the bottom edge (excluding mounting tabs) and 2" wide, at the...
This item is in stockIn Stock
$10.99
View 
Add
Item# KENMFHP1
Stainless steel heat shield. Measures 15-5/8" long X 4-1/8" wide.  Features unique rounded top.  Fits many Kenmore and Master Forge models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$16.56
View 
Add
Item# 18431
Broil King 15-3/4" front to back X 6" wide stainless steel "Flav-R-Wave", heat distribution plate.  Fits Broil King "Baron" models with "Tube-In-Tube" burners, model years 2013 and...
This item is in stockIn Stock
$13.99
View 
Add
Item# MFHP2
Stainless steel vented heat distribution plate. Measures 15-3/4" long X 5-3/8" wide. Features a mounting tab on each corner and 4 slotted vents (2 on each side). Fits a variety of Master Forge models. Designed to be used with cast iron burner part...
This item is in stockIn Stock
$23.30
View 
Add
Item# 9897
Two section Summit Gold/Platinum flavorizer bar set. One section is made up of 7 bars and the other 6 bars, the set has a total of 13 bars. Fits Summit Gold/Platinum A/A6 and B/B6 series. The bars measure 15-7/8" front to back and the total width...
This item is in stockIn Stock
$359.85
View 
Add
Item# G501-0008-W1
Burner shield or "Flame Tamer". Porcelain Coated. Measures 3-3/4" wide X 16" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.
This item is in stockIn Stock
$9.99
View 
Add
Item# 80006357
Burner shield or "Flame Tamer". Porcelain coated. Measures 3-3/4" width X 16" front to back. For easier measurement we measure the width from edge to edge with the shield upside down.
This item is in stockIn Stock
$9.99
View 
Add
Item# PFHP2
Stainless steel, tent shaped burner shield. Measures 16" long X 4" wide (measured across the bottom). Features 4 slots and 4 vents on each side of the tent. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$18.32
View 
Add
Item# G518-0010-W1
Porcelain coated flame tamer. Measures 16" long X 5-3/4" wide. Features unique center segment tab extension. Fits a variety of Sears/Kenmore models. Replaces OEM Part 80018323.
This item is in stockIn Stock
$5.99
View 
Add
Item# BLZ-32-064
Genuine Blaze® Grills OEM Heavy Gauge Stainless Steel Flame Tamer Burner Shield Fits Blaze Grills 3, 4 and 5 Burner Models. Replaces Blaze OEM part BLZ-32-064. Measures 16in. x 6-3/4in. These specially vented Blaze Flame Tamer heat distribution plates...
This item is in stockIn Stock
$54.99
View 
Add
Item# BBQHP1
BBQ Grillware Stainless Steel Heat Distribution Burner Shield. Fits BBQ Grillware models GGPL-2100, GSC-2418 AND GSC-2418N. Features a unique tapered and sloped end-to-end design for heat transfer efficiency. Designed to protect the burner, vaporize food...
This item is in stockIn Stock
$21.36
View 
Add
Item# SCHP3
Stainless steel burner shield. The shield measures 16-1/8" X 4-5/8". For ease of measurement we measure the width from the bottom side. Features slotted vent holes on each side of the plate. IMPORTANT: Remove protective plastic film (if...
This item is in stockIn Stock
$24.38
View 
Add
Item# G524-0032-W1
16-1/8" porcelain coated heat plate. Features a centered tongue mounting extension on one end. Main plate area measures 6-3/4" X 14-5/8. Dimensions, including extension are, 6-3/4" X 16-1/8". Sold individually.
This item is in stockIn Stock
$11.99
View 
Add
Item# SCHP2
Members Mark burner heat distribution shield. Laser cut stainless steel. Dimensions are 8-1/4" wide X 16-1/8" long. More than one required. Sold individually. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$22.75
View 
Add
Item# 90571
Firemagic stainless steel heat plate/flavor grid. Measures 16-3/16" front to back X 8-3/4" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution....
This item is in stockIn Stock
$40.00
View 
Add
Item# 90561
Firemagic stainless steel heat plate/flavor grid. Measures 16-3/16" front to back X 10-1/2" wide. Features a 3/4" square cut-out notch on front and back edges and screen style perforated venting for maximum air flow and heat distribution. Designed to set...
This item is in stockIn Stock
$47.26
View 
Add
Item# 3056-S-2
Set of 2 FireMagic flavor grids. Each grid measures 16-1/4" front to back X 11-7/8" wide. This set fits all FireMagic Aurora A530 models. Genuine FireMagic Part.
This item is in stockIn Stock
Retail: $242.00
$217.80
View 
Add
Item# 3057-S-3
Set of 3 FireMagic stainless steel vented flavor grids. Two measure 16-1/4" front to back X 9-7/8" wide and one measures 16-1/4" front to back X 8-1/2" wide. This set fits all FireMagic Echelon 660, Aurora 660 and Regal 2 Magnum models....
This item is in stockIn Stock
Retail: $308.00
$277.20
View 
Add
Item# 3056-S-3
Set of 3 FireMagic stainless steel vented flavor grids. Two measure 16-1/4" front to back X 11-7/8" wide and one measures 16-1/4" front to back X 10-1/2" wide. This set fits all FireMagic Echelon 790, Aurora 790 and Monarch Magnum models....
This item is in stockIn Stock
Retail: $363.00
$326.70
View 
Add
Item# 3056-S-4
Set of 4 FireMagic stainless steel vented flavor grids. Two measure 16-1/4" front to back X 11-7/8" wide and two measures 16-1/4" front to back X 10-1/2" wide. This set fits all FireMagic Echelon E1060 and Elite Magnum models. Genuine...
This item is in stockIn Stock
Retail: $484.00
$435.60
View 
Add
Item# G527-0013-W1
Porcelain coated "Flame Tamer" or "Burner Shield". Features 32 vent holes in each end. Measures 3-3/4" wide X 16-3/8" long. ( width measurement is from edge to edge with the shield upside down and length is extreme tip to tip).
This item is in stockIn Stock
$10.99
View 
Add
Item# G470-0004-W1
16-1/2" X 2" vented stainless steel heat tent. Fits a variety of Charbroil Performance/Advantage Series 4,5 and 6 burner models as well as other Charbroil models (2017 and newer). Measures 16-1/2" long, across the bottom edge (excluding...
This item is in stockIn Stock
$10.99
View 
Add
Item# BBQHP3
Stainless Steel Heat Distribution Burner Shield features two elongated mounting slots on each end. Designed to protect the burner, vaporize food drippings and create an even cooking surface temperature. Fits a variety of gas grills that require a burner...
This item is in stockIn Stock
$16.33
View 
Add
Item# COHP1
Stainless steel heat distribution shield. Features holes down each side. Measures 16-1/2" front to back X 6-1/4" wide. For easier measurement we measure the width from edge to edge with the shield upside down. IMPORTANT: Remove protective...
This item is sold outOUT OF STOCK
$23.99
View
Item# 94751
16-1/2" X 6-1/2" stainless steel briquette holder with ceramic briquettes. Used on a variety of Barbeque Galore, Turbo and Captain Cook model grills.
This item is in stockIn Stock
$53.02
View 
Add
Item# DCSHP2
16-1/2" X 10-5/8" DCS Stainless Steel Heat Shield. Quality Aftermarket Part.  Replaces DCS  OEM Part 213948. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. Burner is for display purposes only;...
This item is in stockIn Stock
$59.00
View 
Add
Item# BMHP1
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 16-3/4" long X 4" wide (measured across the bottom). Features slotted punched holes and cut-outs on both ends. IMPORTANT: Remove protective plastic film (if present) from heat...
This item is in stockIn Stock
$14.36
View 
Add
Item# PF36-29NS
ProFire heat distribution plate. Measures 7-1/2" wide X 16-3/4" front to back. Heavy gauge stainless steel. Sold by each. This is the center plate used on models designed with 3 heat distribution plates.
This item is in stockIn Stock
$93.99
View 
Add
Item# PF27-29NS
ProFire heat distribution plate. Measures 9-1/4" wide X 16-3/4" front to back. Heavy gauge stainless steel. Sold by each. More than one required, (2 plus additional narrower center plate used on some larger models).
This item is in stockIn Stock
$93.99
View 
Add
Item# LYNXHP1
Stainless steel briquette holder tray. Measures 16-3/4" front to back X 9-5/8" wide and holds 28, 2" X 2" briquettes, see parts BQLYX and 41628. Made of 304 grade stainless steel; .048" thick. Fits a variety of LYNX models. ...
This item is in stockIn Stock
$86.00
View 
Add
Item# BMHP7
Stainless steel tent shaped burner shield. Measures 16-13/16" long X 3-5/16" wide (measured across the bottom). Features single mounting hole at the peak of the tent, on each end. Fits many Brinkmann models. IMPORTANT: Remove protective plastic...
This item is in stockIn Stock
$15.83
View 
Add
Item# 80000947
Burner shield or "Flame Tamer". Stainless steel. Measures 4-1/2" width X 16-7/8" front to back with measurement including mounting tabs. For easier measurement we measure the width from edge to edge with the shield upside down.
This item is in stockIn Stock
$22.65
View 
Add
Item# G208-0029-W1
Burner heat tent. Black porcelain coated steel. Measures 6-1/4" wide X 16-7/8" long.
This item is in stockIn Stock
$13.49
View 
Add
Item# G422-0010-W1
Stainless steel vented heat tent. Fits Charbroil Signature Series "Conventional" (Not Tru-Infrared) 2, 3, and 4 burner models (2015 and newer). Measures 17" long, across the bottom edge X 2-1/8" wide at the base. Sold individually, more...
This item is in stockIn Stock
$9.19
View 
Add
Item# 80003394
Black porcelain coated burner shield. Measures 17" long X 3-7/8" across the bottom.
This item is in stockIn Stock
$6.49
View 
Add
Item# 80017023
Burner shield heat distribution plate. Porcelain coated steel. Dimensions are 17" long X 3-7/8" measured across the bottom edge to edge. The special features are the two slotted holes on the top edges of the shield.
This item is in stockIn Stock
$6.49
View 
Add
Item# PFHP3
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17" long (measured "tip to tip" along the outside bottom edge) X 4" wide. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$15.67
View 
Add
Item# DUCHP2-SET
Set of 5 stainless steel heat distribution plates. Each plate measures 17" long X 5" wide.  Fits Ducane "Stainless and Meridian Series", 5-Burner models. IMPORTANT: Remove protective plastic film (if present) from heat...
This item is in stockIn Stock
Retail: $175.00
$91.24
View 
Add
Item# DUCHP1-SET
Set of 3 stainless steel heat distribution plates. Each plate measures 17" long X 6-1/2" wide. Fits Ducane "Stainless and Meridian Series", 3-Burner models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior...
This item is in stockIn Stock
Retail: $120.00
$68.49
View 
Add
Item# 29102162
Heat shield, fits many Charbroil "Electric" Patio Bistro models. Measures 17-1/2" in diameter X 4" deep. Features a center drain opening and 3 threaded mounting hole grommets. Genuine Charbroil Part.
This item is in stockIn Stock
$15.39
View 
Add
Item# 29102214
Round inner reflector.  Fits many Charbroil "Electric" Patio Bistro models. Measures 17-1/2" in diameter and 5-3/4" deep. Features center drain hole opening, rim cut-out for element and 3 mounting tabs. Genuine Charbroil...
This item is in stockIn Stock
$26.99
View 
Add
Item# PERF13710A-14
Stainless steel ProFire "Flavor Grid" heat distribution plate. Measures 17-1/8" front to back by 12" wide. More than one required sold individually.
This item is in stockIn Stock
Retail: $148.75
$83.79
View 
Add
Item# 66796
Set of "11" stainless steel flavorizer bars for Weber Genesis II 610 and "LX" 640 models (2017 and newer). Each bar measures 17-1/8" long ,measured along the bottom edges and 16-1/8" long, measured along the top peak of the...
This item is in stockIn Stock
$100.95
View 
Add
Item# 66797
Set of "7" stainless steel flavorizer bars for Weber Genesis II 410/"LX" 440 models (2017 and newer) and Genesis 400 Series (2022-Current) Each bar measures 17-1/8" long ,measured along the bottom edges and 16-1/8" long,...
This item is in stockIn Stock
$74.85
View 
Add
Item# 66794
Set of "3" stainless steel flavorizer bars for Weber Genesis II 210 and "LX" 240 models (2017 and newer). Each bar measures 17-1/8", measured along the bottom edges, and 16-1/8" measured along the top peak of the...
This item is in stockIn Stock
$42.45
View 
Add
Item# 66795
Set of "5" stainless steel flavorizer bars for Weber Genesis II 310 and "LX" 340 models (2017-21) and Genesis 300 Series (2022-Current). Each bar measures 17-1/8", measured along the bottom edges and 16-1/8",...
This item is in stockIn Stock
$62.25
View 
Add
Item# 29102789
Porcelain coated steel vaporizer bar. Fits Charbroil Grill2Go Tru-Infrared (model years 2012 and newer). Measures 17-1/4" long (including mounting tabs) X 3-7/8" wide. Features dual mounting tabs on each end. Charbroil OEM Part.
This item is sold outSOLD OUT: Expected 3/28/2025
$17.99
View
Item# NGCHP3
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 5" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective...
This item is in stockIn Stock
$23.73
View 
Add
Item# NGCHP4
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 5-7/8" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective...
This item is in stockIn Stock
$23.75
View 
Add
Item# NGCHP1
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-1/4" long X 6-13/16" wide (measured across the bottom). Features slotted holes along the sides and "V-shaped" cut-outs on both ends. IMPORTANT: Remove protective...
This item is in stockIn Stock
$20.70
View 
Add
Item# ALFBT1
Premium Stainless Steel Briquette Tray, designed to hold 24 ceramic briquettes (sold separately). Crafted from high-quality 304 grade stainless steel for durability and longevity. This tray is a direct replacement for Alfresco OEM Part 510-0005, ensuring a...
This item is in stockIn Stock
$75.89
View 
Add
Item# NGSHP3
Stainless steel heat distribution shield. Measures 17-5/16" front to back X 8-1/4" wide. Fits a variety of Nexgrill, JennAir, Vermont Casting and Costco/Kirkland models. IMPORTANT: Remove protective plastic film (if present) from heat plates...
This item is in stockIn Stock
$29.51
View 
Add
Item# NGSHP2
Stainless steel heat distribution shield. Measures 17-5/16" front to back X 9-7/8" wide. Fits a variety of Nexgrill and Costco/Kirkland models. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
Retail: $50.25
$29.49
View 
Add
Item# 94281
17-3/8" x 4" porcelain coated steel heat plate. Shallow tent design, stands 7/8" tall at the peak of the tent. Features 2 slotted mounting holes at one end and one at the other. Fits a variety of Brinkmann and many other Brands/Models.
This item is in stockIn Stock
$13.34
View 
Add
Item# 18433
Broil King 17-1/2" front to back X 6" wide stainless steel "Flav-R-Wave", heat distribution plate. Fits Broil King "Regal" (2010-Newer) and "Imperial" (2009-Newer) models with...
This item is in stockIn Stock
$14.99
View 
Add
Item# PFHP1
Heavy gauge 430 stainless steel, tent shaped burner shield. Measures 17-9/16" long X 3-3/16" wide (measured across the bottom). Features slotted holes at one end, and a round cutout on the opposite end. IMPORTANT: Remove protective plastic film...
This item is in stockIn Stock
$14.47
View 
Add
Item# 62783
OEM Weber Part. Set of 5 porcelain coated steel flavorizer bars. Each bar measures 17-5/8" long (16-5/8" along the peak of the tent) and stands 2-1/8" tall.  Fits Genesis 300 series, model years 2011-2016.  Genuine Weber Part....
This item is in stockIn Stock
Retail: $75.99
$65.99
View 
Add
Item# 62784
"Set of 5" stainless steel flavorizer bars. Each bar measures 17-5/8" long (16-5/8" along the peak of the tent) and stand 2-1/8" tall.  Fits Genesis 300 series, model years  2011-2016.  Genuine Weber Part....
This item is in stockIn Stock
Retail: $153.99
$143.99
View 
Add
Item# WFB5-2011
Set of 5 stainless steel flavorizer bars (18 Gauge/430 Grade).  Each bar measures 17-1/2" long X 2-1/4" wide X 2-3/8" tall.  Fits Weber Genesis 300 Series, model years 2011-2016.  Replaces Weber OEM Part 7620. ...
This item is in stockIn Stock
Retail: $105.00
$137.10
View 
Add
Item# BULLHP1
17-5/8" x 4-3/8 " stainless steel, vented flame tamer/heat distribution plate. Fits most Bull models, including Angus, Brahma, Lonestar and Premium. More than one required, sold individually.  Quality Aftermarket Part. Constructed of 304...
This item is in stockIn Stock
$36.75
View 
Add
Item# NGCHP2
Heavy guage 430 stainless steel heat distribution plate. Measures 17-3/4" long x 6-3/8" across the bottom. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use. IMPORTANT: Remove protective plastic film (if...
This item is in stockIn Stock
$24.40
View 
Add
Item# FMHP3
Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 7-7/16" wide X 17-3/4" front to back. This heat plate is designed to stand directly on top of cast iron or cast stainless burners. Features...
This item is in stockIn Stock
$52.30
View 
Add
Item# NGJAHP1
Heavy guage 430 stainless steel burner heat distribution plate. Measures 17-3/4" long x 8" across the bottom. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$22.18
View 
Add
Item# BMHP9
17-3/4" X 10-1/4" stainless steel heat distribution plate. Features a shallow vented tent shape with one larger hole for manually igniting the burner, when necessary.  This heat plate is designed to be used with Brinkmann "U"...
This item is in stockIn Stock
$36.55
View 
Add
Item# FMHP4
Firemagic stainless steel flavor grid heat plate with four 1-1/2" long support legs. Measures 10-11/16" wide X 17-3/4" front to back. This heat plate is designed to stand directly on top of cast iron or cast stainless burners....
This item is in stockIn Stock
$68.01
View 
Add
Item# KENHP7
Stainless steel "vented" tent shaped heat plate. Measures 17-7/8" long X 4" wide. Features 6 vents, 3 on each side of the peak. IMPORTANT: Remove protective plastic film (if present) from heat plates prior to use.
This item is in stockIn Stock
$18.77
View 
Add
Item# ALFBT3
Premium Stainless Steel Briquette Tray crafted from high-quality 304 grade stainless steel for durability and longevity, paired with 18 top-quality kiln dried Pyramid Ceramic Briquettes. This combination is a direct replacement for Alfresco OEM Part 510-0677,...
This item is in stockIn Stock
$162.76
View 
Add
Item# ALFBT2
Premium Stainless Steel Briquette Tray, designed to hold 24 ceramic briquettes (sold separately).  Crafted from 304 grade high-quality stainless steel for durability and longevity. This tray is a direct replacement for Alfresco ALX2 models OEM Part...
This item is in stockIn Stock
$72.20
View 
Add
Item# 29101553
18" diameter "round" heat shield for Charbroil Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker. Genuine Charbroil Part.
This item is in stockIn Stock
$11.99
View 
Add
Item# VIKCT2
18" long X 5-1/2" wide stainless steel briquette tray with briquettes. Includes 16 pyramid shaped briquettes. Comes fully assembled. Designed to use with Viking models that utilize burner part VIKU1-IBR (sold separately). Fits models VGBQ33002RENS,...
This item is in stockIn Stock
$114.76
View 
Add
Item# WLFTECT1
18" long X 6-1/8" wide stainless steel briquette tray with briquettes. Fits Wolf OG30, 42, 54 and many Twin Eagles models. Features a removable center rail that enables you to remove/replace the briquettes and heavy gauge 304 grade stainless...
This item is in stockIn Stock
$104.90
View 
Add
Item# WLFTECT2
18" long X 12-1/8" wide stainless steel briquette tray with briquettes. Fits Wolf OG30, 42, 54 and many Twin Eagles models. Features 2 removable rails that enable you to remove/replace the briquettes and heavy gauge 304 grade stainless construction....
This item is in stockIn Stock
$182.38
View 
Add
Item# TCCFT
Stainless steel briquet holder measures 18-1/8" X 7-1/4". Includes briquets. More than one required, sold by each.
This item is in stockIn Stock
$49.28
View 
Add
Item# 70375
Set of 4 heavy gauge stainless steel flavorizer bars for Summit 400/600, "model years 2007 - 2023". Note: To replace all the bars you will need to order either another set of 4 or set of 5 as required for your model. Bars measure 18-1/8" long X...
This item is in stockIn Stock
$41.15
View 
Add
Item# 70376
Set of 5 heavy gauge stainless steel flavorizer bars for Summit 400/600, "model years 2007 - 2023". Note: To replace all the bars you will need to order either another set of 4 or set of 5 as required for your model. Bars measure 18-1/8" long X...
This item is in stockIn Stock
$49.56
View 
Add
Item# WLFHP1
18-1/2" X 4" stainless steel, vented heat plate. Fits Wolf BBQ and BBQ2 Series. Heavy gauge 304 grade stainless construction. Features tapered cut on one end and venting on both sides. (Replaces Wolf OEM Part 815590).  Made In...
This item is in stockIn Stock
$51.31
View 
Add
Item# DCSHP3
Stainless steel radiant tube holder for DCS. Measures 18-5/8" front to back X 9-7/8" wide. This tray holds eighteen 9-1/2" ceramic radiant tubes. (Radiant tubes not included and are shown for display only, for ceramic tubes...
This item is in stockIn Stock
$105.01
View 
Add
Item# DCSRADIANT-KIT
DCS "Tray and Tube" Complete Kit. Includes one stainless steel holder tray and "18" ceramic tubes. The tray measures 18-5/8" front to back X 9-7/8" wide and each ceramic tube is 9-1/2" long. Fits many DCS...
This item is in stockIn Stock
$135.99
View 
Add
Item# 99051
Black porcelain coated heat distribution plate. Measures 18-3/4" front to back X 10-1/8" wide. (Sold by each, more than one may be required.)
This item is in stockIn Stock
$27.07
View 
Add
Item# DCSHP1
19" X 9-1/2" DCS stainless steel heat shield. Fits models 24, 27DBQR, 36, 36 Series, 36ABQ, 36ABQR, 36ABQAR, 36BQ, 36BQAR, 36BQR, 48, 48 Series, 48BQ, and 48BQR. (Matches to the CIDCS-LG, 20-1/2" cast iron burner). Quality Aftermarket...
This item is in stockIn Stock
$59.00
View 
Add
Item# 4156416
Stainless steel tent shaped drip vaporiser bar, fits Masterflame 5000 Series gas grills. Measures 19-1/4" x 2-1/2".
This item is in stockIn Stock
$11.65
View 
Add
Item# LYNXHP2
Stainless steel briquette holder tray. Measures 19-1/4" front to back X 10-1/2" wide and holds 28, 2" X 2" briquettes, see parts BQLYX and 41628. Made of 304 grade stainless steel. Fits a variety of LYNX models. More than one...
This item is in stockIn Stock
$82.68
View 
Add
Item# LYNXHP3
Stainless steel briquette holder tray. Measures 19-1/4" front to back X 12-1/2" wide and holds 35, 2" X 2" briquettes, see parts BQLYX and 41628. Made of 304 grade stainless steel. Fits a variety of LYNX models. More than one required....
This item is in stockIn Stock
$89.93
View 
Add
Item# VIKHP1
Viking stainless steel heat distribution plate. Measures 21" front to back by 6-1/8" wide.
This item is in stockIn Stock
$54.36
View 
Add
Item# 4156419
Stainless steel tent shaped drip vaporiser bar, fits Masterflame 6000 Series gas grills. Measures 21-5/8" long x 2-1/2" wide.
This item is in stockIn Stock
Retail: $18.30
$12.75
View 
Add
Item# 7534
Genuine Weber® Flavorizer Bars made in Porcelain Coated Steel. Set of five Flavorizer Bars/Burner Shields that measure 21-1/2in. Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them...
This item is in stockIn Stock
Retail: $75.99
$65.99
View 
Add
Item# 65902
Genuine Weber® Flavorizer Bars made in Stainless Steel. Set of five Flavorizer Bars/Burner Shields that measure 21-1/2in. Weber® Stainless Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the...
This item is in stockIn Stock
$73.45
View 
Add
Item# VIKCT1
21-1/2" long X 5-1/2" wide stainless steel briquette tray with briquettes. Includes 18 ceramic pyramid shaped briquettes. Comes fully assembled. Designed to use with Viking models that utilize burner part VIKU1-IBR (sold separately). Fits Viking...
This item is in stockIn Stock
$128.11
View 
Add
Item# 7536
Genuine Weber® Steel Flavorizer Bars finished in a heat resistant porcelain enamel coating. 5 piece set, each bar measures 22-1/2in. Weber® Porcelain Coated Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting...
This item is in stockIn Stock
Retail: $75.99
$65.99
View 
Add
Item# 65903
Genuine Weber® Flavorizer Bars made in Stainless Steel. Set of five Flavorizer Bars/Burner Shields that measure 22-1/2in. Weber® Stainless Steel Flavorizer Bars are shields that act like the armor your burners deserve, protecting them from the...
This item is in stockIn Stock
$85.75
View 
Add
Item# WEBHD
Set of 2, "stainless steel" heat deflectors, (installed below the burners). Fit Genesis 300 Series, 2011-2016 models (with upfront controls). Each deflector measures 13-1/4" front to back by 8-3/4" wide (width measurement made from edge to...
This item is in stockIn Stock
$51.39
View 
Add
Item# 9898
Summit Silver/Gold/Platinum C/C4 and D/D4 Series, stainless steel flavorizer bar set. Two sections with 4 bars each, the set has a total of 8 bars.  This set of bars is used with Summit Silver/Gold/Platinum models which are equipped with the smoker...
This item is in stockIn Stock
$319.00
View 
Add
Item# VIKHP2
Viking, stainless steel heat distribution plate. Measures 23-1/2" front to back (including the mounting tabs) X 5-1/2" wide.
This item is in stockIn Stock
$81.36
View 
Add
Item# 65901
Full set of 13 stainless steel flavorizer bars (8 short and 5 long). The short bars are 16" and the long bars are 23-3/8". Installed in unique criss-cross "double stacked" configuration.  Replaces old Weber Part Number 7538....
This item is in stockIn Stock
$135.25
View 
Add
Item# 9896
Summit Silver/Gold/Platinum A/A4 and B/B4, stainless steel flavorizer bar set. One section is made up of 5 bars and the other section 4 bars, the set has a total of 9 bars. The bars measure 15-7/8" front to back and the total width left to right of both...
This item is in stockIn Stock
$289.00
View 
Add
Item# 7538
Full set of 13 stainless steel flavorizer bars (8 short and 5 long). The short bars are 16" and the long bars are 23-3/8". Installed in unique criss-cross "double stacked" configuration. Genuine Weber Part.
This item is in stockIn Stock
$135.25
View 
Add
Item# 99813
Full set of 13 porcelain coated flavorizer bars. Includes 8 short and 5 long bars. The short bars measure 16" and the long bars are 23-3/8".  Installed in unique criss-cross double stacked configuration.  Replaces OEM Part 9813....
This item is in stockIn Stock
$74.78
View 
Add
Item# 55711123
16" diameter "round" heat shield for Charbroil Big Easy "Tru-Infrared" Turkey Fryer. Fits Model 17102065. Genuine Charbroil Part.
This item is in stockIn Stock
$10.69
View 
Add
Item# 66795
Set of "5" stainless steel flavorizer bars for Weber Genesis II 310 and "LX" 340 models (2017-21) and Genesis 300 Series (2022-Current). Each bar measures 17-1/8", measured along the bottom edges and 16-1/8",...
This item is in stockIn Stock
$62.25
View 
Add
Item# WFBGP-2002
"Set of 5" stainless steel flavorizor bars. Bar dimensions are 23-3/8" long X 2-7/8" tall X 2-1/4" wide(at the base). Fits Weber Genesis Gold B & C (2001-2002) and Platinum B & C grills from 2000-2004.  Quality...
This item is in stockIn Stock
Retail: $94.20
$66.99
View 
Add
Item# 4156417
Stainless steel tent shaped burner shield/drip vaporiser bar, fits Masterflame 7000 Series gas grills. Measures 23-3/8 inches long X 2-9/16" wide.
This item is in stockIn Stock
$14.19
View 
Add
Item# 55710188
16" diameter "round" heat shield for Charbroil Big Easy "Tru-Infrared" Turkey Fryer/Roaster and Smoker Cooker (SRG). Genuine Charbroil Part.
This item is in stockIn Stock
$9.99
View 
Add
Item# 80010138
7000 Series porcelain coated steel burner shield/vaproizer bar. Measures 23-7/8" Long X 6-1/8" Wide.
This item is in stockIn Stock
$11.79
View 
Add
Item# 7539
"Porcelain coated" flavorizer bar set for Genesis 300 Series, "model years 2007-2010", (control knobs located on the right hand side table). Includes 5 bars each measuring 24-1/2" long.  Genuine Weber Part.
This item is in stockIn Stock
Retail: $75.99
$65.99
View 
Add
Item# 7540
"Stainless steel" flavorizer bar set for Genesis 300 Series, "model years 2007-2010", (control knobs located on the right hand side table).  Includes 5 bars each measuring 24-1/2" long.  Genuine Weber Part.
This item is in stockIn Stock
$156.99
View 
Add
Item# 4500291
Quickset 8000 Series vaporizer bar. Measures 26-1/4" X 6-1/2".
This item is in stockIn Stock
$17.99
View 
Add
Item# 4156420
Stainless steel tent shaped drip vaporiser bar. Fits Masterflame 9000 Series gas grills. Measures 29-1/4" long x 4-1/8" wide.
This item is in stockIn Stock
$19.99
View 
Add